1 2003-08-16 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
3 * geninitrd: - enable new raid_start available in latest busybox
5 2003-08-16 Micha³ Moskal <malekith@pld-linux.org>
8 - create /dev/null (busybox seems to need it) and /dev/zero (just in case)
10 * geninitrd: - set -x seems to cause SEGV
12 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
14 * geninitrd: - one more sbin->bin
17 - on 2.4 also load only module which is needed for mounting rootfs
19 2003-08-15 Micha³ Moskal <malekith@pld-linux.org>
21 * geninitrd: - use mdadm not initrd-mdadm for scanning
23 * geninitrd: - fix syntax
25 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
27 * geninitrd: - use mdadm.conf, too - then raidtab
29 * geninitrd: - initrd-busybox is in bin not sbin
31 2003-08-15 Micha³ Moskal <malekith@pld-linux.org>
33 * geninitrd: - first try
35 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
37 * geninitrd: - beginning of mdadm.conf support
39 2003-08-15 Micha³ Moskal <malekith@pld-linux.org>
41 * geninitrd: - marged busybox version
43 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
46 - on 2.5/2.6 with sysfs we are able to fount exactly which module is required to get rootfs controller working
48 2003-08-13 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
50 * geninitrd: - fix ataraid support
52 2003-08-11 Arkadiusz Patyk <areq@pld-linux.org>
54 * geninitrd: - check if exist /proc/bus/pci/devices
56 2003-08-11 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
58 * geninitrd: - debug messages removed
60 2003-08-10 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
63 - same names caused variable covering and wrong results (fixed)
64 - don't try to load module unknown
65 - don't fail if modules not found (staticly compiled?)
68 - if no IDE module on disk then it's probably compiled into kernel so don't fail
69 - if PCI database not found then print warning
71 2003-08-10 Jan Rêkorajski <baggins@pld-linux.org>
73 * TODO: - we need ide=reverse support
76 - when comparing pci IDs make sure they will be compared as strings
78 * geninitrd: - DO NOT sort driver modules, are you nuts?
80 2003-08-09 Arkadiusz Patyk <areq@pld-linux.org>
82 * Attic/pci.ide: - move to pci-database
84 * geninitrd: - use PCI ids from pci-database
86 2003-08-09 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
88 * geninitrd: - find all PREIDEMODS
90 2003-08-08 Arkadiusz Patyk <areq@pld-linux.org>
93 - better check VERSION - don't need install rc-script, bsp in builder
95 2003-08-08 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
97 * geninitrd: - debug message removed
99 * Attic/pci.ide, geninitrd:
100 - support for automatic IDE module finding (needs testing)
102 2003-08-07 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
104 * geninitrd: - fix typo
106 * geninitrd: - added support for static mdadm
108 2003-07-17 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
111 - there is insmod.static.modutils not insmod.static.modprobe
113 2003-06-30 Artur Frysiak <wiget@pld-linux.org>
115 * geninitrd: - use correct version of insmod.static
117 2003-04-09 Artur Frysiak <wiget@pld-linux.org>
119 * geninitrd, geninitrd.8.xml:
120 - added --with-insmod-static to allow using /sbin/insmod.static if bsp internal insmod/insmod_ng is bugi
121 - use DocBook XML 4.2 for man page
122 - describe --with-insmod-static and Linux 2.5.x support
123 - small "despamification"
125 2003-02-19 Artur Frysiak <wiget@pld-linux.org>
127 * geninitrd: - Linux 2.5.x support
129 * TODO: - and more things to do
131 * geninitrd.8.xml: - typo fixes
133 2002-11-27 Artur Frysiak <wiget@pld-linux.org>
135 * geninitrd: - typo in LVM code
137 2002-11-26 Artur Frysiak <wiget@pld-linux.org>
139 * geninitrd: - first version with LVM support but not yet fully tested
141 * lvm.todo: LVM implementation plan
143 2002-10-13 Witek Krêcicki <adasi@pld-linux.org>
145 * geninitrd: - fixed preload
147 2002-09-27 Artur Frysiak <wiget@pld-linux.org>
149 * geninitrd.8.xml: - one more contributor
152 - support for gzipped modules (patch by Witold Filipczyk <witekfl@poczta.onet.pl>)
153 - use findfs from e2fsprogs (>= 1.28) to find root device if specified by UUID or LABEL
155 2002-09-06 Artur Frysiak <wiget@pld-linux.org>
157 * geninitrd.8.xml: - not show almost empty hardware RAID desc
160 - added some notes about SCSI, ATA RAID and hardware RAID support
162 * geninitrd: New features:
165 - by default use raidstart (if needed)
166 - show raidstart related options in help message
167 - drop undocumented --use-raidstart switch
169 2002-03-25 Micha³ Moskal <malekith@pld-linux.org>
172 - fixed raidstart (should work with real-soon-now-to-be-released version of
174 - use bsp-raidless if not using raid
176 2002-03-13 Artur Frysiak <wiget@pld-linux.org>
178 * Makefile: better make dist
181 add geninitrd.8.xml to dist tarball and make geninitrd.8 from xml source
183 * Attic/geninitrd.8: this file are generated from xml source
185 * geninitrd.8.xml, Attic/geninitrd.8: typo
187 * geninitrd.8.xml: formating fixes
189 * geninitrd: UUID and LABEL support for ext3
190 fix displaying missing modules names
192 2002-03-07 Jakub Bogusz <qboosh@pld-linux.org>
194 * geninitrd: - fixed raidstart (if raidstart bsp builtin works)
196 2002-03-07 Artur Frysiak <wiget@pld-linux.org>
198 * geninitrd.8.xml: now is completed
200 2002-02-20 Artur Frysiak <wiget@pld-linux.org>
202 * geninitrd.sysconfig: FS->INITRDFS
204 2002-02-20 Jakub Bogusz <qboosh@pld-linux.org>
206 * geninitrd.sysconfig: - typo
208 2002-02-20 Artur Frysiak <wiget@pld-linux.org>
210 * geninitrd: don't generate modules.dep
212 2002-02-20 Micha³ Moskal <malekith@pld-linux.org>
214 * geninitrd: - run depmod, if modules.dep hasn't been found
216 2002-02-20 Artur Frysiak <wiget@pld-linux.org>
218 * geninitrd: - --fs is back, but if used warning is writen
220 2002-02-19 Artur Frysiak <wiget@pld-linux.org>
222 * Makefile: portability fix
224 * geninitrd.8.xml: - start rewrite documentation to XML Docbook.
226 * geninitrd: - drop trash support (trash is dead)
227 - rename --fs to --initrdfs (less confusion but incompatible change :( )
228 - new configuration option EXIT_IF_MISSING (is set to "no" then warn about missing modules but continue)
229 - disable root on loop device (need rewrite for bsp)
231 * TODO: total rewite plan
233 2002-01-29 Micha³ Moskal <malekith@pld-linux.org>
235 * geninitrd: - depmod support added
238 2002-01-17 Tomasz Pala <gotar@pld-linux.org>
240 * Attic/geninitrd.8, geninitrd: - cosmetics.
242 2001-12-15 Pawe³ Go³aszewski <blues@pld-linux.org>
248 2001-10-15 Artur Frysiak <wiget@pld-linux.org>
250 * geninitrd: fixed typo reported by GoTaR <gotar@priv0.onet.pl>
252 2001-09-10 Artur Frysiak <wiget@pld-linux.org>
254 * geninitrd: VERSION is *not* hardcoded
256 2001-09-07 kloczek <kloczek@pld-linux.org>
258 * Makefile: - rename release target to dist.
260 * geninitrd: - hardcode VERSION (as 2.6)
261 - move initialize variables on top and few indentation.
263 * geninitrd.sysconfig: - uncomment using bsp by default.
265 2001-09-07 Artur Frysiak <wiget@pld-linux.org>
270 * Makefile, geninitrd: Use RCS Id as version number
272 * geninitrd: release 2.5 ready
274 2001-09-07 Pawe³ Go³aszewski <blues@pld-linux.org>
276 * TODO, geninitrd.sysconfig:
277 - commented PREMODS added to sysconfig-file
280 2001-07-06 Artur Frysiak <wiget@pld-linux.org>
282 * TODO: one task done; one added
284 2001-07-04 kloczek <kloczek@pld-linux.org>
286 * TODO: Answer for quesion.
288 2001-07-04 Artur Frysiak <wiget@pld-linux.org>
290 * Makefile: version 2.4
292 * Attic/geninitrd.8: some options described
296 2001-07-03 Artur Frysiak <wiget@pld-linux.org>
298 * TODO: more tasks done
300 * Attic/geninitrd.8: - --omit-* options are removed
302 * TODO: some tasks done; new tasks added
304 2001-07-02 Micha³ Moskal <malekith@pld-linux.org>
308 2001-06-27 Artur Frysiak <wiget@pld-linux.org>
312 * TODO: UUID/LABEL support- done
314 2001-06-27 Bartosz Waszak <waszi@pld-linux.org>
316 * TODO: - add support to LVM
318 2001-06-27 Artur Frysiak <wiget@pld-linux.org>
320 * Attic/geninitrd.8: updated to geninitrd
322 2001-06-22 kloczek <kloczek@pld-linux.org>
325 - fix bug: generate proper modules list if in fstab is use UUID or LABEL in
328 * Makefile: - version 2.2.
330 2001-03-19 Micha³ Zawalich <michuz@pld-linux.org>
332 * Makefile: - version 2.1
333 - this version works fine with 2.4.x
335 2001-01-30 kloczek <kloczek@pld-linux.org>
337 * geninitrd.sysconfig:
338 - uncomment COMPRESS=yes, FS=rom, PROBESCSI=yes, PROBEIDE=yes, PROBERAID=yes
340 2001-01-17 Dariusz Karolczak <inglod@pld-linux.org>
344 2000-12-15 Micha³ Moskal <malekith@pld-linux.org>
346 * geninitrd.sysconfig: Updated to use bsp.
348 2000-12-06 kloczek <kloczek@pld-linux.org>
350 * Makefile: - version 1.2.
352 2000-11-30 Jan Rêkorajski <baggins@pld-linux.org>
354 * Makefile: - version 1.1
356 2000-11-22 Jacek Konieczny <jajcus@pld-linux.org>
360 2000-11-16 Dariusz Karolczak <inglod@pld-linux.org>
362 * TODO: *** empty log message ***
364 2000-11-14 Artur Frysiak <wiget@pld-linux.org>
366 * Attic/geninitrd.8: - added cramfs support (untested)
368 2000-11-09 Jacek Konieczny <jajcus@pld-linux.org>
370 * Attic/geninitrd.8, TODO, Makefile, geninitrd.sysconfig: New file.