1 --- php-5.2.8/php.ini-dist 2008-11-28 21:07:09.000000000 +0200
2 +++ php-5.2.8/php.ini 2009-01-05 14:53:55.914702890 +0200
7 -; This is the default settings file for new PHP installations.
8 -; By default, PHP installs itself with a configuration suitable for
9 -; development purposes, and *NOT* for production purposes.
10 -; For several security-oriented considerations that should be taken
11 -; before going online with your site, please consult php.ini-recommended
12 -; and http://php.net/manual/en/security.php.
14 +; This is the default settings file for new PHP installations from
15 +; PLD Linux Distribution.
16 +; It's based mainly on php.ini-dist, but with some changes made with
17 +; security in mind (see below, consult also
18 +; http://php.net/manual/en/security.php).
20 +; Please note, that in PLD installations /etc/php/php.ini file
21 +; contains global settings for all SAPIs (cgi, cli, apache...),
22 +; and after reading this file, SAPI-specific file (/etc/php/php-cgi.ini,
23 +; /etc/php/php-cli.ini, /etc/php/php-apache.ini...) is INCLUDED
24 +; (so you don't have to duplicate whole large file to override only
33 -; All the values in the php.ini-dist file correspond to the builtin
34 -; defaults (that is, if no php.ini is used, or if you delete these lines,
35 -; the builtin defaults will be identical).
36 +; If you use constants in your value, and these constants belong to a
37 +; dynamically loaded extension (either a PHP extension or a Zend extension),
38 +; you may only use these constants *after* the line that loads the extension.
41 +; Below is the list of settings changed from default as specified in
42 +; php.ini-recommended. These settings make PHP more secure and encourage
44 +; The price is that with these settings, PHP may be incompatible with some old
45 +; or bad-written applications, and sometimes, more difficult to develop with.
46 +; Using this settings is warmly recommended for production sites. As all of
47 +; the changes from the standard settings are thoroughly documented, you can
48 +; go over each one, and decide whether you want to use it or not.
50 +; - register_globals = Off [Security, Performance]
51 +; Global variables are no longer registered for input data (POST, GET, cookies,
52 +; environment and other server variables). Instead of using $foo, you must use
53 +; you can use $_REQUEST["foo"] (includes any variable that arrives through the
54 +; request, namely, POST, GET and cookie variables), or use one of the specific
55 +; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
56 +; on where the input originates. Also, you can look at the
57 +; import_request_variables() function.
58 +; Note that register_globals = Off is the default setting since PHP 4.2.0.
59 +; - display_errors = Off [Security]
60 +; With this directive set to off, errors that occur during the execution of
61 +; scripts will no longer be displayed as a part of the script output, and thus,
62 +; will no longer be exposed to remote users. With some errors, the error message
63 +; content may expose information about your script, web server, or database
64 +; server that may be exploitable for hacking. Production sites should have this
65 +; directive set to off.
66 +; - log_errors = On [Security]
67 +; This directive complements the above one. Any errors that occur during the
68 +; execution of your script will be logged (typically, to your server's error log,
69 +; but can be configured in several ways). Along with setting display_errors to off,
70 +; this setup gives you the ability to fully understand what may have gone wrong,
71 +; without exposing any sensitive information to remote users.
72 +; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
73 +; By default, PHP surpresses errors of type E_NOTICE. These error messages
74 +; are emitted for non-critical errors, but that could be a symptom of a bigger
75 +; problem. Most notably, this will cause error messages about the use
76 +; of uninitialized variables to be displayed.
77 +; - register_argc_argv = Off [Performance]
78 +; Disables registration of the somewhat redundant $argv and $argc global
80 +; - magic_quotes_gpc = Off [Performance]
81 +; Input data is no longer escaped with slashes so that it can be sent into
82 +; SQL databases without further manipulation. Instead, you should use the
83 +; function addslashes() on each input element you wish to send to a database.
84 +; - variables_order = "GPCS" [Performance]
85 +; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access
86 +; environment variables, you can use getenv() instead.
88 +; For completeness, below is list of the rest of changes recommended for
89 +; performance, but NOT applied in default php.ini in PLD (since they are
90 +; not needed for security or may cause problems with some applications
91 +; more likely than above).
93 +; - output_buffering = 4096 [Performance]
94 +; Set a 4KB output buffer. Enabling output buffering typically results in less
95 +; writes, and sometimes less packets sent on the wire, which can often lead to
96 +; better performance. The gain this directive actually yields greatly depends
97 +; on which Web server you're working with, and what kind of scripts you're using.
98 +; - allow_call_time_pass_reference = Off [Code cleanliness]
99 +; It's not possible to decide to force a variable to be passed by reference
100 +; when calling a function. The PHP 4 style to do this is by making the
101 +; function require the relevant argument by reference.
108 ; The number of significant digits displayed in floating point numbers.
112 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
115 ; (e.g. by adding its signature to the Web server header). It is no security
116 ; threat in any way, but it makes it possible to determine whether you use PHP
117 ; on your server or not.
125 ; - Show all errors except for notices and coding standards warnings
127 -error_reporting = E_ALL & ~E_NOTICE
128 +;error_reporting = E_ALL & ~E_NOTICE
130 +error_reporting = E_ALL
132 ; Print out errors (as a part of the output). For production web sites,
133 ; you're strongly encouraged to turn this feature off, and use error logging
136 ; stdout (On) - Display errors to STDOUT
139 +display_errors = Off
141 ; Even when display_errors is on, errors that occur during PHP's startup
142 ; sequence are not displayed. It's strongly recommended to keep
144 ; Log errors into a log file (server-specific log, stderr, or error_log (below))
145 ; As stated above, you're strongly advised to use error logging in place of
146 ; error displaying on production web sites.
150 ; Set maximum length of log_errors. In error_log information about the source is
151 ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
153 ;report_zend_debug = 0
155 ; Store the last error/warning message in $php_errormsg (boolean).
159 ; Turn off normal error reporting and emit XML-RPC error XML
163 ; Disable the inclusion of HTML tags in error messages.
164 ; Note: Never use this feature for production boxes.
168 ; If html_errors is set On PHP produces clickable error messages that direct
169 ; to a page describing the error or function causing the error in detail.
171 ; Environment and Built-in variables (G, P, C, E & S respectively, often
172 ; referred to as EGPCS or GPC). Registration is done from left to right, newer
173 ; values override older values.
174 -variables_order = "EGPCS"
175 +variables_order = "GPCS"
177 ; Whether or not to register the EGPCS variables as global variables. You may
178 ; want to turn this off if you don't want to clutter your scripts' global scope
179 @@ -421,12 +490,12 @@
180 ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
181 ; and friends. If you're not using them, it's recommended to turn them off,
182 ; for performance reasons.
183 -register_long_arrays = On
184 +register_long_arrays = Off
186 ; This directive tells PHP whether to declare the argv&argc variables (that
187 ; would contain the GET information). If you don't use these variables, you
188 ; should turn it off for increased performance.
189 -register_argc_argv = On
190 +register_argc_argv = Off
192 ; When enabled, the SERVER and ENV variables are created when they're first
193 ; used (Just In Time) instead of when the script starts. If these variables
197 ; Magic quotes for incoming GET/POST/Cookie data.
198 -magic_quotes_gpc = On
199 +magic_quotes_gpc = Off
201 ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
202 magic_quotes_runtime = Off
203 @@ -488,55 +557,13 @@
206 ; Directory in which the loadable extensions (modules) reside.
207 -extension_dir = "./"
208 +extension_dir = "/usr/lib/php"
210 ; Whether or not to enable the dl() function. The dl() function does NOT work
211 ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
215 -; cgi.force_redirect is necessary to provide security running PHP as a CGI under
216 -; most web servers. Left undefined, PHP turns this on by default. You can
217 -; turn it off here AT YOUR OWN RISK
218 -; **You CAN safely turn this off for IIS, in fact, you MUST.**
219 -; cgi.force_redirect = 1
221 -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
225 -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
226 -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
227 -; will look for to know it is OK to continue execution. Setting this variable MAY
228 -; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
229 -; cgi.redirect_status_env = ;
231 -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
232 -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
233 -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
234 -; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
235 -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
236 -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
237 -; cgi.fix_pathinfo=0
239 -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
240 -; security tokens of the calling client. This allows IIS to define the
241 -; security context that the request runs under. mod_fastcgi under Apache
242 -; does not currently support this feature (03/17/2002)
243 -; Set to 1 if running under IIS. Default is zero.
244 -; fastcgi.impersonate = 1;
246 -; Disable logging through FastCGI connection
247 -; fastcgi.logging = 0
249 -; cgi.rfc2616_headers configuration option tells PHP what type of headers to
250 -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
251 -; is supported by Apache. When this option is set to 1 PHP will send
252 -; RFC2616 compliant header.
254 -;cgi.rfc2616_headers = 0
261 ; needs to go here. Specify the location of the extension with the
262 ; extension_dir directive above.
265 -; Windows Extensions
266 -; Note that ODBC support is built in, so no dll is needed for it.
267 -; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
268 -; extension folders as well as the separate PECL DLL download (PHP 5).
269 -; Be sure to appropriately set the extension_dir directive.
271 -;extension=php_bz2.dll
272 -;extension=php_curl.dll
273 -;extension=php_dba.dll
274 -;extension=php_dbase.dll
275 -;extension=php_fdf.dll
276 -;extension=php_gd2.dll
277 -;extension=php_gettext.dll
278 -;extension=php_gmp.dll
279 -;extension=php_ifx.dll
280 -;extension=php_imap.dll
281 -;extension=php_interbase.dll
282 -;extension=php_ldap.dll
283 -;extension=php_mbstring.dll
284 -;extension=php_exif.dll
285 -;extension=php_mcrypt.dll
286 -;extension=php_mhash.dll
287 -;extension=php_mime_magic.dll
288 -;extension=php_ming.dll
289 -;extension=php_msql.dll
290 -;extension=php_mssql.dll
291 -;extension=php_mysql.dll
292 -;extension=php_mysqli.dll
293 -;extension=php_oci8.dll
294 -;extension=php_openssl.dll
295 -;extension=php_pdo.dll
296 -;extension=php_pdo_firebird.dll
297 -;extension=php_pdo_mssql.dll
298 -;extension=php_pdo_mysql.dll
299 -;extension=php_pdo_oci.dll
300 -;extension=php_pdo_oci8.dll
301 -;extension=php_pdo_odbc.dll
302 -;extension=php_pdo_pgsql.dll
303 -;extension=php_pdo_sqlite.dll
304 -;extension=php_pgsql.dll
305 -;extension=php_pspell.dll
306 -;extension=php_shmop.dll
307 -;extension=php_snmp.dll
308 -;extension=php_soap.dll
309 -;extension=php_sockets.dll
310 -;extension=php_sqlite.dll
311 -;extension=php_sybase_ct.dll
312 -;extension=php_tidy.dll
313 -;extension=php_xmlrpc.dll
314 -;extension=php_xsl.dll
315 -;extension=php_zip.dll
321 ; Maximum time (in seconds) for connect timeout. -1 means no limit
322 mysql.connect_timeout = 60
324 +; The name of the character set to use as the default character set.
325 +;mysql.connect_charset=utf8
327 ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
328 ; SQL-Errors will be displayed.
329 mysql.trace_mode = Off
332 mysqli.default_socket =
334 +; The name of the character set to use as the default character set.
335 +;mysqli.connect_charset=utf8
337 ; Default host for mysql_connect() (doesn't apply in safe mode).
338 mysqli.default_host =
341 ; Allow or prevent reconnect
342 mysqli.reconnect = Off
345 +; The name of the character set to use as the default character set.
346 +;pdo_mysql.connect_charset=utf8
349 ; Allow or prevent persistent links.
350 msql.allow_persistent = On
355 -;browscap = extra/browscap.ini
356 +browscap = /etc/php/browscap.ini
359 ; Default host for ifx_connect() (doesn't apply in safe mode).
360 @@ -1273,7 +1257,7 @@
361 ; Enables or disables WSDL caching feature.
362 soap.wsdl_cache_enabled=1
363 ; Sets the directory name where SOAP extension will put cache files.
364 -soap.wsdl_cache_dir="/tmp"
365 +soap.wsdl_cache_dir="/var/run/php"
366 ; (time to live) Sets the number of second while cached file will be used
367 ; instead of original one.
368 soap.wsdl_cache_ttl=86400