[packages/kismet.git] / kismet.spec

#
# TODO: Anybody knows, why it will not build,
#	when kernel-headers are installed?
#
Summary:	Wireless network sniffer
Summary(pl.UTF-8):	Sniffer sieci bezprzewodowych
Name:		kismet
Version:	2007_10_R1
%define	_ver	2007-10-R1
Release:	1
License:	GPL
Group:		Networking/Utilities
Source0:	http://www.kismetwireless.net/code/%{name}-%{_ver}.tar.gz
# Source0-md5:	2100c667e69db0cde35fa2d06c8516e2
Patch0:		%{name}-c++.patch
URL:		http://www.kismetwireless.net/
BuildRequires:	ImageMagick-devel
BuildRequires:	autoconf
BuildRequires:	automake
BuildRequires:	gmp-devel
BuildRequires:	libpcap-devel >= 2:0.9.4-1
BuildRequires:	libstdc++-devel
BuildRequires:	libwiretap-devel
BuildRequires:	ncurses-ext-devel
# it uses internal structures - so strict deps
%requires_eq	libpcap
BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)

%description
Kismet is a 802.11b wireless network sniffer. It is capable of
sniffing using almost any wireless card supported in Linux, including
Prism2 based cards supported by the Wlan-NG project (Linksys, Dlink,
Rangelan, etc), cards which support standard packet capture via
libpcap (Cisco), and limited support for cards without RF Monitor
support.

%description -l pl.UTF-8
Kismet to sniffer bezprzewodowych sieci 802.11b. Jest zdolny do
sniffowania używając prawie dowolnych bezprzewodowych kart sieciowych
w Linuksie włączając w to karty Prism2 wspierane przez projekt Wlan-NG
(Linksys, Dlink, Rangelan, etc), kart które umożliwiają
przechwytywanie pakietów poprzez libpcap (Cisco), oraz ograniczone
wsparcie dla kart bez obsługi Monitora RF.

%prep
%setup -q -n %{name}-%{_ver}
%patch0 -p1

sed -i -e 's#-o $(INSTUSR)##g' -e 's#-o $(INSTGRP)##g' Makefile.in

%build
cp -f /usr/share/automake/config.* .
%{__aclocal}
%{__autoconf}
CPPFLAGS="-I/usr/include/ncurses"
%configure \
	--enable-syspcap \
	--with-linuxheaders=no \
	--with-ethereal=%{_includedir} \
%ifarch arm
	--enable-zaurus
%endif

%{__make}

%install
rm -rf $RPM_BUILD_ROOT
install -d $RPM_BUILD_ROOT{%{_sysconfdir},%{_bindir},%{_datadir}}

%{__make} install \
	INSTGRP=$(id -g) \
	MANGRP=$(id -g) \
	prefix=$RPM_BUILD_ROOT%{_prefix} \
	exec_prefix=$RPM_BUILD_ROOT%{_prefix} \
	ETC=$RPM_BUILD_ROOT%{_sysconfdir} \
	BIN=$RPM_BUILD_ROOT%{_bindir} \
	SHARE=$RPM_BUILD_ROOT%{_datadir}/%{name} \
	MAN=$RPM_BUILD_ROOT%{_mandir}

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(644,root,root,755)
%doc docs/* CHANGELOG CHANGELOG-OLD README TODO
%attr(755,root,root) %{_bindir}/*
%{_sysconfdir}/*_manuf
%{_datadir}/%{name}
%{_mandir}/man?/*
%config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/%{name}*
Commit	Line	Data
	1	#
	2	# TODO: Anybody knows, why it will not build,
	3	# when kernel-headers are installed?
	4	#
	5	Summary: Wireless network sniffer
	6	Summary(pl.UTF-8): Sniffer sieci bezprzewodowych
	7	Name: kismet
	8	Version: 2007_10_R1
	9	%define _ver 2007-10-R1
	10	Release: 1
	11	License: GPL
	12	Group: Networking/Utilities
	13	Source0: http://www.kismetwireless.net/code/%{name}-%{_ver}.tar.gz
	14	# Source0-md5: 2100c667e69db0cde35fa2d06c8516e2
	15	Patch0: %{name}-c++.patch
	16	URL: http://www.kismetwireless.net/
	17	BuildRequires: ImageMagick-devel
	18	BuildRequires: autoconf
	19	BuildRequires: automake
	20	BuildRequires: gmp-devel
	21	BuildRequires: libpcap-devel >= 2:0.9.4-1
	22	BuildRequires: libstdc++-devel
	23	BuildRequires: libwiretap-devel
	24	BuildRequires: ncurses-ext-devel
	25	# it uses internal structures - so strict deps
	26	%requires_eq libpcap
	27	BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
	28
	29	%description
	30	Kismet is a 802.11b wireless network sniffer. It is capable of
	31	sniffing using almost any wireless card supported in Linux, including
	32	Prism2 based cards supported by the Wlan-NG project (Linksys, Dlink,
	33	Rangelan, etc), cards which support standard packet capture via
	34	libpcap (Cisco), and limited support for cards without RF Monitor
	35	support.
	36
	37	%description -l pl.UTF-8
	38	Kismet to sniffer bezprzewodowych sieci 802.11b. Jest zdolny do
	39	sniffowania używając prawie dowolnych bezprzewodowych kart sieciowych
	40	w Linuksie włączając w to karty Prism2 wspierane przez projekt Wlan-NG
	41	(Linksys, Dlink, Rangelan, etc), kart które umożliwiają
	42	przechwytywanie pakietów poprzez libpcap (Cisco), oraz ograniczone
	43	wsparcie dla kart bez obsługi Monitora RF.
	44
	45	%prep
	46	%setup -q -n %{name}-%{_ver}
	47	%patch0 -p1
	48
	49	sed -i -e 's#-o $(INSTUSR)##g' -e 's#-o $(INSTGRP)##g' Makefile.in
	50
	51	%build
	52	cp -f /usr/share/automake/config.* .
	53	%{__aclocal}
	54	%{__autoconf}
	55	CPPFLAGS="-I/usr/include/ncurses"
	56	%configure \
	57	--enable-syspcap \
	58	--with-linuxheaders=no \
	59	--with-ethereal=%{_includedir} \
	60	%ifarch arm
	61	--enable-zaurus
	62	%endif
	63
	64	%{__make}
	65
	66	%install
	67	rm -rf $RPM_BUILD_ROOT
	68	install -d $RPM_BUILD_ROOT{%{_sysconfdir},%{_bindir},%{_datadir}}
	69
	70	%{__make} install \
	71	INSTGRP=$(id -g) \
	72	MANGRP=$(id -g) \
	73	prefix=$RPM_BUILD_ROOT%{_prefix} \
	74	exec_prefix=$RPM_BUILD_ROOT%{_prefix} \
	75	ETC=$RPM_BUILD_ROOT%{_sysconfdir} \
	76	BIN=$RPM_BUILD_ROOT%{_bindir} \
	77	SHARE=$RPM_BUILD_ROOT%{_datadir}/%{name} \
	78	MAN=$RPM_BUILD_ROOT%{_mandir}
	79
	80	%clean
	81	rm -rf $RPM_BUILD_ROOT
	82
	83	%files
	84	%defattr(644,root,root,755)
	85	%doc docs/* CHANGELOG CHANGELOG-OLD README TODO
	86	%attr(755,root,root) %{_bindir}/*
	87	%{_sysconfdir}/*_manuf
	88	%{_datadir}/%{name}
	89	%{_mandir}/man?/*
	90	%config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/%{name}*