[packages/apache.git] / apache-httpd.conf

# $Id$
#
# This is the main Apache HTTP server configuration file.
# It contains the configuration directives that give the server its instructions.
#
# This config aims to be clean and readable.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.

ServerRoot "/etc/httpd"
DefaultType text/plain

# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 192.168.1.1:80
Listen 80

# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@example.com
#
ServerAdmin root@example.com

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log

# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn

Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 5
UseCanonicalName Off
AccessFileName .htaccess
ServerTokens Prod
ServerSignature On
HostnameLookups Off
#AddDefaultCharset UTF-8

TraceEnable Off

# Include other modules and packages config.
Include conf.d/*.conf

# Include webapps config
Include webapps.d/*.conf

<IfModule alias_module>
	# ScriptAlias: This controls which directories contain server scripts.
	# ScriptAliases are essentially the same as Aliases, except that
	# documents in the target directory are treated as applications and
	# run by the server when requested rather than as documents sent to the
	# client.  The same rules about trailing "/" apply to ScriptAlias
	# directives as to Alias.
	#
	ScriptAlias /cgi-bin/ "/home/services/httpd/cgi-bin/"

	<Directory "/home/services/httpd/cgi-bin">
		AllowOverride None
		Options None
		<IfModule mod_authz_host.c>
			Order allow,deny
			Allow from all
		</IfModule>
	</Directory>
</IfModule>

# VirtualHost: Allows the daemon to respond to requests for more than one
# server address, if your server machine is configured to accept IP packets
# for multiple addresses. This can be accomplished with the ifconfig
# alias flag, or through kernel patches like VIF.

# Any apache.conf conf directive may go into a VirtualHost command.
# See also the BindAddress entry.

# Setup default vhost (first one defined in config) and include vhosts configuration
NameVirtualHost *:80
<VirtualHost *:80>
    ServerName localhost
#	ServerAdmin webmaster@host.example.com
#	DocumentRoot /www/docs/host.example.com
#	ErrorLog logs/host.example.com-error_log
#	TransferLog logs/host.example.com-access_log
</VirtualHost>

Include vhosts.d/*.conf
Commit	Line	Data
	1	# $Id$
	2	#
	3	# This is the main Apache HTTP server configuration file.
	4	# It contains the configuration directives that give the server its instructions.
	5	#
	6	# This config aims to be clean and readable.
	7	# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
	8	# In particular, see
	9	# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
	10	# for a discussion of each configuration directive.
	11
	12	ServerRoot "/etc/httpd"
	13	DefaultType text/plain
	14
	15	# User/Group: The name (or #number) of the user/group to run httpd as.
	16	# It is usually good practice to create a dedicated user and group for
	17	# running httpd, as with most system services.
	18	User http
	19	Group http
	20
	21	# Listen: Allows you to bind Apache to specific IP addresses and/or
	22	# ports, instead of the default. See also the <VirtualHost>
	23	# directive.
	24	#
	25	# Change this to Listen on specific IP addresses as shown below to
	26	# prevent Apache from glomming onto all bound IP addresses.
	27	#Listen 192.168.1.1:80
	28	Listen 80
	29
	30	# ServerAdmin: Your address, where problems with the server should be
	31	# e-mailed. This address appears on some server-generated pages, such
	32	# as error documents. e.g. admin@example.com
	33	#
	34	ServerAdmin root@example.com
	35
	36	# ServerName gives the name and port that the server uses to identify itself.
	37	# This can often be determined automatically, but we recommend you specify
	38	# it explicitly to prevent problems during startup.
	39	#
	40	# If your host doesn't have a registered DNS name, enter its IP address here.
	41	#
	42	ServerName localhost
	43
	44	# ErrorLog: The location of the error log file.
	45	# If you do not specify an ErrorLog directive within a <VirtualHost>
	46	# container, error messages relating to that virtual host will be
	47	# logged here. If you do define an error logfile for a <VirtualHost>
	48	# container, that host's errors will be logged there and not here.
	49	ErrorLog logs/error_log
	50
	51	# LogLevel: Control the number of messages logged to the error_log.
	52	# Possible values include: debug, info, notice, warn, error, crit,
	53	# alert, emerg.
	54	LogLevel warn
	55
	56	Timeout 300
	57	KeepAlive On
	58	MaxKeepAliveRequests 100
	59	KeepAliveTimeout 5
	60	UseCanonicalName Off
	61	AccessFileName .htaccess
	62	ServerTokens Prod
	63	ServerSignature On
	64	HostnameLookups Off
	65	#AddDefaultCharset UTF-8
	66
	67	TraceEnable Off
	68
	69	# Include other modules and packages config.
	70	Include conf.d/*.conf
	71
	72	# Include webapps config
	73	Include webapps.d/*.conf
	74
	75	<IfModule alias_module>
	76	# ScriptAlias: This controls which directories contain server scripts.
	77	# ScriptAliases are essentially the same as Aliases, except that
	78	# documents in the target directory are treated as applications and
	79	# run by the server when requested rather than as documents sent to the
	80	# client. The same rules about trailing "/" apply to ScriptAlias
	81	# directives as to Alias.
	82	#
	83	ScriptAlias /cgi-bin/ "/home/services/httpd/cgi-bin/"
	84
	85	<Directory "/home/services/httpd/cgi-bin">
	86	AllowOverride None
	87	Options None
	88	<IfModule mod_authz_host.c>
	89	Order allow,deny
	90	Allow from all
	91	</IfModule>
	92	</Directory>
	93	</IfModule>
	94
	95	# VirtualHost: Allows the daemon to respond to requests for more than one
	96	# server address, if your server machine is configured to accept IP packets
	97	# for multiple addresses. This can be accomplished with the ifconfig
	98	# alias flag, or through kernel patches like VIF.
	99
	100	# Any apache.conf conf directive may go into a VirtualHost command.
	101	# See also the BindAddress entry.
	102
	103	# Setup default vhost (first one defined in config) and include vhosts configuration
	104	NameVirtualHost *:80
	105	<VirtualHost *:80>
	106	ServerName localhost
	107	# ServerAdmin webmaster@host.example.com
	108	# DocumentRoot /www/docs/host.example.com
	109	# ErrorLog logs/host.example.com-error_log
	110	# TransferLog logs/host.example.com-access_log
	111	</VirtualHost>
	112
	113	Include vhosts.d/*.conf