#!/bin/sh
#
-# shutdwn Common script for system halt/reboot.
+# shutdown Common script for system halt/reboot.
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-# Changes: Grzegorz Stanislawski <stangrze@open.net.pl>
-# Arkadiusz Mi¶kiewicz <misiek@pld-linux.org>
#
-# $Id$
# Set the path.
PATH=/sbin:/bin:/usr/bin:/usr/sbin
trap "echo" INT SEGV QUIT TERM
set +e
+emit pld.shutdown-started
+emit starting JOB=shutdown
+emit started JOB=shutdown
+
rc_splash "reboot"
# Kill all processes.
runlevel=$1
previous=$2
+# Stop blogd before umounting /var
+if [ -x /sbin/blogd ]; then
+ killall -q -QUIT blogd
+fi
+
+if [ -e /dev/rtc -o -e /dev/rtc0 ]; then
+ run_cmd "$(nls 'Syncing hardware clock to system time')" hwclock --systohc
+fi
+
# check for other processes.
# there could be none if all services were terminated properly
# pgrep -g 0 requires procps >= 3.2.6-1.1
+# XXX: pgrep is on /usr!
pids=$(pgrep -g 0 -l -v | grep -v '^1 ')
-if [ -n "$pids" ]; then
+if [ -n "$pids" ] || [ ! -x /usr/bin/pgrep ]; then
run_cmd "Sending all processes the TERM signal" killall5 -15
fi
pids=$(pgrep -g 0 -l -v | grep -v '^1 ')
-if [ -n "$pids" ]; then
+if [ -n "$pids" ] || [ ! -x /usr/bin/pgrep ]; then
sleep 5
run_cmd "Sending all processes the KILL signal" killall5 -9
fi
halt -w
if ! is_yes "$VSERVER"; then
- # Work-around for the nVidia drivers Wake-On-Lan functionality.
- forcedeth_workaround
-
# Turn off swap, then unmount file systems.
run_cmd "Turning off swap" swapoff -a
run_cmd "Turning off quotas for local filesystems" /sbin/quotaoff -a
fi
+ # grab kexec_loaded state before we umount /sys
+ kexec_loaded=`cat /sys/kernel/kexec_loaded 2>/dev/null`
+
# Unmount file systems, killing processes if we have to.
sig=-15
retry=3
force=
- remaining=$(awk '!/(^#| proc | loopfs | devfs | devpts | shm | iso9660 | ramfs | tmpfs | sysfs | securityfs | squashfs |^none|^\/dev\/root| \/ )/ {print $2}' /proc/mounts)
- while [ -n "$remaining" -a "$retry" -gt 0 ]
- do
- show "Unmounting file systems" ; busy
- if ERRORS=$(umount -a $FORCE -t noproc,devfs 2>&1) ; then
+ if [ -z "$UMOUNT_IGNORE" ]; then
+ UMOUNT_IGNORE="/"
+ else
+ UMOUNT_IGNORE="/ $UMOUNT_IGNORE"
+ fi
+ remaining=$(awk -v ig="^($UMOUNT_IGNORE)$" 'BEGIN { gsub(/[\t ]+/, "|", ig); } \
+ $3 !~ /^(proc|loopfs|devpts|devtmpfs|shm|iso9660|ramfs|tmpfs|sysfs|securityfs|squashfs)$/ \
+ && $1 !~ /^(none|\/dev\/root)$/ \
+ && $2 !~ ig {print $2}' /proc/mounts)
+ while [ -n "$remaining" -a "$retry" -gt 0 ]; do
+ show "Unmounting file systems"; busy
+ ERRORS=$(umount -a $force -t noproc 2>&1); rc=$?
+
+ # we might had unmounted /usr, recheck $TPUT availability
+ # but well. we need tput only for show() and busy() (ok() and fail() messages are already cached)
+ # TODO: look ahead the messages?
+ if is_yes "$TPUT"; then
+ TPUT=
+ rc_gettext_init
+ fi
+
+ if [ $rc = 0 ]; then
ok
else
fail
fi
sleep 2
- remaining=$(awk '!/(^#| proc | loopfs | devfs | devpts | shm | iso9660 | ramfs | tmpfs | sysfs | securityfs | squashfs |^none|^\/dev\/root| \/ )/ {print $2}' /proc/mounts)
+ remaining=$(awk -v ig="^($UMOUNT_IGNORE)$" 'BEGIN { gsub(/[\t ]+/, "|", ig); } \
+ $3 !~ /^(proc|loopfs|devpts|devtmpfs|shm|iso9660|ramfs|tmpfs|sysfs|securityfs|squashfs)$/ \
+ && $1 !~ /^(none|\/dev\/root)$/ \
+ && $2 !~ ig {print $2}' /proc/mounts)
[ -z "$remaining" ] && break
- /sbin/fuser -k -m $sig $remaining > /dev/null
+ fuser -k -m $sig $remaining > /dev/null
sleep 5
retry=$(($retry-1))
sig=-9
run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
- lvmversion=$(/sbin/vgchange --version 2>/dev/null | awk '{gsub("vgchange: Logical Volume Manager ",""); gsub("LVM version: ",""); gsub(/\..*/,"");print $1; exit}')
- if [ "$lvmversion" = "2" ] ; then
- lvmignorelock="--ignorelockingfailure"
+ if [ -x /sbin/vgchange ]; then
+ lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
+ if [ "$lvmversion" = "2" ]; then
+ lvmsysinit="--sysinit"
else
- lvmignorelock=""
+ lvmsysinit=""
fi
- run_cmd "Stopping LVM volume groups" /sbin/vgchange -a n $lvmignorelock
+ /sbin/vgchange -a n $lvmsysinit > /dev/null 2>&1
fi
- goraidtab=1
if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ]; then
- if (grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null); then
- run_cmd "Turning off RAID devices" /sbin/mdadm --stop --scan
+ if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null; then
+ /sbin/mdadm --stop --scan > /dev/null 2>&1
rc=$?
- [ "$rc" -eq 0 ] && goraidtab=0
fi
fi
- # turn off raid
- if [ -x /sbin/raidstop -a -f /etc/raidtab -a "$goraidtab" -eq 1 ]; then
- # we can not use raidstop -a here because this will only stop
- # devices listed in the default config file which is not always
- # the case. So we look only for the active raid devices
- if [ -f /proc/mdstat ] ; then
- mddevs=$(awk '/^md.* active/ {print $1}' /proc/mdstat)
- for mddev in $mddevs ; do
- show "Turning off RAID for %s" "$mddev"
- daemon /sbin/raidstop /dev/$mddev
- done
- unset mddev mddevs
- fi
- # runcmd "Turning off RAID" /sbin/raidstop -a
- fi
-
show "Remounting remaining filesystems ro mode"; busy
- if ( mount | awk '/ext2|ext3|reiserfs|xfs|jfs/ { print $3 }' | \
- while read line; do
- mount -n -o ro,remount $line; done ); then
+ if mount | awk '/ext2|ext3|reiserfs|xfs|jfs/ { print $3 }' | while read line; do mount -n -o ro,remount $line; done; then
ok
else
fail
_rebootwhat="vserver"
fi
+if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
+ . /etc/rc.d/init.d/cryptsetup
+
+ show "Stopping disk encryption"
+ halt_crypto && ok || fail
+fi
+
if [ "$runlevel" = "0" ] ; then
show "The $_rebootwhat is halted"; ok
- [ -f /fastboot ] && (show "On the next boot fsck will be skipped."; ok)
+ if [ -f /fastboot ]; then
+ show "On the next boot fsck will be skipped."; ok
+ fi
- if [ -x /sbin/poweroff-ups -a -f /etc/killpower -a -f /etc/sysconfig/ups ] ; then
+ if [ -f /etc/killpower -a -f /etc/sysconfig/ups ] ; then
. /etc/sysconfig/ups
- is_yes "$POWEROFF_UPS" && /sbin/poweroff-ups
+ if is_yes "$POWEROFF_UPS"; then
+ if [ -d /etc/ups.d ]; then
+ for i in /etc/ups.d/*.sh; do
+ [ ! -f $i -o ! -x $i ] && continue
+ $i poweroff
+ done
+ fi
+ [ -x /sbin/poweroff-ups ] && /sbin/poweroff-ups
+ fi
fi
- [ "$previous" != "unknown" ] && eval halt -d -p
+ [ "$previous" != "unknown" ] && halt -d -p -f
else
show "Please stand by while rebooting the $_rebootwhat"; ok
- [ -f /fastboot ] && (show "On the next boot fsck will be skipped."; ok)
- [ -x /sbin/kexec ] && /sbin/kexec -e
- [ "$previous" != "unknown" ] && eval reboot -d
-fi
+ if [ -f /fastboot ]; then
+ show "On the next boot fsck will be skipped."; ok
+ fi
+
+ # not really sure where thse events should go
+ emit stopped JOB=shutdown
+ emit stopping JOB=shutdown
+
+ if [ -x /sbin/kexec ] && [ "$kexec_loaded" = "1" ]; then
+ show "Will now restart with kexec"
+ /sbin/kexec -e
+ fail
+ fi
-# This must be last line !
-# vi:syntax=sh
+ [ "$previous" != "unknown" ] && reboot -d -f
+fi
projects / projects / rc-scripts.git / blobdiff