---- php-5.4.7/sapi/fpm/php-fpm.conf.in 2012-10-05 22:16:44.895998479 +0300
-+++ php-5.3.17/sapi/fpm/php-fpm.conf.in 2012-10-12 12:35:47.601602945 +0300
-@@ -12,7 +12,7 @@
- ; Relative path can also be used. They will be prefixed by:
- ; - the global prefix if it's been set (-p arguement)
- ; - @prefix@ otherwise
--;include=etc/fpm.d/*.conf
-+;include=/etc/php/fpm.d/*.conf
-
- ;;;;;;;;;;;;;;;;;;
- ; Global Options ;
-@@ -22,14 +22,14 @@
- ; Pid file
- ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
- ; Default Value: none
--;pid = run/php-fpm.pid
-+pid = /var/run/@processname@.pid
+diff -urNp -x '*.orig' php-5.6.40.org/sapi/fpm/Makefile.frag php-5.6.40/sapi/fpm/Makefile.frag
+--- php-5.6.40.org/sapi/fpm/Makefile.frag 2021-08-23 23:19:50.029101357 +0200
++++ php-5.6.40/sapi/fpm/Makefile.frag 2021-08-23 23:19:51.305766688 +0200
+@@ -12,8 +12,8 @@ install-fpm: $(SAPI_FPM_PATH)
- ; Error log file
- ; If it's set to "syslog", log is sent to syslogd instead of being written
- ; in a local file.
- ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
- ; Default Value: log/php-fpm.log
--;error_log = log/php-fpm.log
-+error_log = /var/log/php/@processname@.log
+ @echo "Installing PHP FPM config: $(INSTALL_ROOT)$(sysconfdir)/" && \
+ $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir)/fpm.d || :
+- @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf.default || :
+- @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf.default || :
++ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf || :
++ @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf || :
- ; syslog_facility is used to specify what type of program is logging the
- ; message. This lets syslogd specify that messages from different facilities
-@@ -93,7 +93,7 @@
- ; specific port;
+ @echo "Installing PHP FPM man page: $(INSTALL_ROOT)$(mandir)/man8/"
+ @$(mkinstalldirs) $(INSTALL_ROOT)$(mandir)/man8
+diff -urNp -x '*.orig' php-5.6.40.org/sapi/fpm/php-fpm.conf-d.in php-5.6.40/sapi/fpm/php-fpm.conf-d.in
+--- php-5.6.40.org/sapi/fpm/php-fpm.conf-d.in 2021-08-23 23:19:50.029101357 +0200
++++ php-5.6.40/sapi/fpm/php-fpm.conf-d.in 2021-08-23 23:19:51.305766688 +0200
+@@ -35,7 +35,7 @@ group = @php_fpm_group@
+ ; (IPv6 and IPv4-mapped) on a specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
-listen = 127.0.0.1:9000
+listen = /var/run/php/@processname@.sock
- ; Set listen(2) backlog. A value of '-1' means unlimited.
- ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-@@ -105,7 +105,7 @@
+ ; Set listen(2) backlog.
+ ; Default Value: 65535 (-1 on FreeBSD and OpenBSD)
+@@ -46,9 +46,9 @@ listen = 127.0.0.1:9000
+ ; BSD-derived systems allow connections regardless of permissions.
+ ; Default Values: user and group are set as the running user
+ ; mode is set to 0660
+-;listen.owner = @php_fpm_user@
+-;listen.group = @php_fpm_group@
+-;listen.mode = 0660
++listen.owner = root
++listen.group = @php_fpm_group@
++listen.mode = 0660
+ ; When POSIX Access Control Lists are supported you can set them using
+ ; these options, value is a comma separated list of user/group names.
+ ; When set, listen.owner and listen.group are ignored
+@@ -61,7 +61,7 @@ listen = 127.0.0.1:9000
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
-;listen.allowed_clients = 127.0.0.1
+listen.allowed_clients = 127.0.0.1
- ; Set permissions for unix socket, if one is used. In Linux, read/write
- ; permissions must be set in order to allow connections from a web server. Many
-@@ -277,7 +277,7 @@
+ ; Specify the nice(2) priority to apply to the pool processes (only if set)
+ ; The value can vary from -19 (highest priority) to 20 (lower priority)
+@@ -386,7 +386,7 @@ pm.max_spare_servers = 3
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
+diff -urNp -x '*.orig' php-5.6.40.org/sapi/fpm/php-fpm.conf.in php-5.6.40/sapi/fpm/php-fpm.conf.in
+--- php-5.6.40.org/sapi/fpm/php-fpm.conf.in 2021-08-23 23:19:50.029101357 +0200
++++ php-5.6.40/sapi/fpm/php-fpm.conf.in 2021-08-23 23:19:51.305766688 +0200
+@@ -14,14 +14,14 @@
+ ; Pid file
+ ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
+ ; Default Value: none
+-;pid = run/php-fpm.pid
++pid = /var/run/@processname@.pid
+
+ ; Error log file
+ ; If it's set to "syslog", log is sent to syslogd instead of being written
+ ; in a local file.
+ ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
+ ; Default Value: log/php-fpm.log
+-;error_log = log/php-fpm.log
++error_log = /var/log/php/@processname@.log
+
+ ; syslog_facility is used to specify what type of program is logging the
+ ; message. This lets syslogd specify that messages from different facilities
+@@ -116,3 +116,10 @@
+ ; used in logs and stats. There is no limitation on the number of pools which
+ ; FPM can handle. Your system will tell you anyway :)
+
++; Include one or more files. If glob(3) exists, it is used to include a bunch of
++; files from a glob(3) pattern. This directive can be used everywhere in the
++; file.
++; Relative path can also be used. They will be prefixed by:
++; - the global prefix if it's been set (-p argument)
++; - @prefix@ otherwise
++include=/etc/php/fpm.d/*.conf
+diff -urNp -x '*.orig' php-5.6.40.org/sapi/fpm/status.html.in php-5.6.40/sapi/fpm/status.html.in
+--- php-5.6.40.org/sapi/fpm/status.html.in 2019-01-09 10:54:13.000000000 +0100
++++ php-5.6.40/sapi/fpm/status.html.in 2021-08-23 23:19:51.305766688 +0200
+@@ -96,7 +96,7 @@
+ var sort_index;
+ var sort_order;
+
+- doc_url.value = location.protocol + '//' + location.host + "/status?json&full";
++ doc_url.value = location.protocol + '//' + location.host + "/fpm-status?json&full";
+
+ ths = document.getElementsByTagName("th");
+ for (var i=0; i<ths.length; i++) {
projects / packages / php.git / blobdiff