---- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
-+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
-@@ -15,7 +15,8 @@
- #include <stdio.h>
- #include <ctype.h>
- #include "modpost.h"
--#include "../../include/generated/autoconf.h"
-+// PLD architectures don't use CONFIG_SYMBOL_PREFIX
-+//#include "../../include/generated/autoconf.h"
- #include "../../include/linux/license.h"
-
- /* Some toolchains use a `_' prefix for all user symbols. */
-
---- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
-+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
-@@ -9,6 +9,12 @@
- $cc -print-file-name=lib${lib}.${ext} | grep -q /
- if [ $? -eq 0 ]; then
- echo "-l${lib}"
-+ for libt in tinfow tinfo ; do
-+ $cc -print-file-name=lib${libt}.${ext} | grep -q /
-+ if [ $? -eq 0 ]; then
-+ echo "-l${libt}"
-+ fi
-+ done
- exit
- fi
- done
-
-diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
-index 7a0c800..ec5ebbb 100644
---- a/drivers/net/ethernet/realtek/r8169.c
-+++ b/drivers/net/ethernet/realtek/r8169.c
-@@ -6927,6 +6927,14 @@ rtl_init_one(struct pci_dev *pdev, const
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = RTL_R8(MAC0 + i);
-
-+ if (!is_valid_ether_addr(dev->dev_addr)) {
-+ /* Report it and use a random ethernet address instead */
-+ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
-+ random_ether_addr(dev->dev_addr);
-+ netdev_info(dev, "Using random MAC address: %pM\n",
-+ dev->dev_addr);
-+ }
-+
- SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
- dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
-
-[PATCH] SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
-
-If a device has the skip_vpd_pages flag set we should simply fail the
-scsi_get_vpd_page() call.
-
-Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-Acked-by: Alan Stern <stern@rowland.harvard.edu>
-Tested-by: Stuart Foster <smf.linux@ntlworld.com>
-Cc: stable@vger.kernel.org
-
-diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
-index 3b1ea34..eaa808e 100644
---- a/drivers/scsi/scsi.c
-+++ b/drivers/scsi/scsi.c
-@@ -1031,6 +1031,9 @@
+; https://lkml.org/lkml/2019/7/10/244
+diff -ur linux-5.3/drivers/scsi/aacraid.org/aacraid.h linux-5.3/drivers/scsi/aacraid/aacraid.h
+--- linux-5.3/drivers/scsi/aacraid.org/aacraid.h 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/aacraid.h 2019-11-04 09:29:51.321486211 +0100
+@@ -2740,17 +2740,6 @@
+ int aac_rx_deliver_producer(struct fib * fib);
+ void aac_reinit_aif(struct aac_dev *aac, unsigned int index);
+
+-static inline int aac_is_src(struct aac_dev *dev)
+-{
+- u16 device = dev->pdev->device;
+-
+- if (device == PMC_DEVICE_S6 ||
+- device == PMC_DEVICE_S7 ||
+- device == PMC_DEVICE_S8)
+- return 1;
+- return 0;
+-}
+-
+ static inline int aac_supports_2T(struct aac_dev *dev)
{
- int i, result;
-
-+ if (sdev->skip_vpd_pages)
-+ goto fail;
-+
- /* Ask for all the pages supported by this device */
- result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
- if (result)
-commit 4d0ed18277cc6f07513ee0b04475f19cd69e75ef
-Author: Peter Hurley <peter@hurleysoftware.com>
-Date: Tue Dec 10 17:12:02 2013 -0500
-
- n_tty: Fix buffer overruns with larger-than-4k pastes
-
- readline() inadvertently triggers an error recovery path when
- pastes larger than 4k overrun the line discipline buffer. The
- error recovery path discards input when the line discipline buffer
- is full and operating in canonical mode and no newline has been
- received. Because readline() changes the termios to non-canonical
- mode to read the line char-by-char, the line discipline buffer
- can become full, and then when readline() restores termios back
- to canonical mode for the caller, the now-full line discipline
- buffer triggers the error recovery.
-
- When changing termios from non-canon to canon mode and the read
- buffer contains data, simulate an EOF push _without_ the
- DISABLED_CHAR in the read buffer.
-
- Importantly for the readline() problem, the termios can be
- changed back to non-canonical mode without changes to the read
- buffer occurring; ie., as if the previous termios change had not
- happened (as long as no intervening read took place).
-
- Preserve existing userspace behavior which allows '\0's already
- received in non-canon mode to be read as '\0's in canon mode
- (rather than trigger add'l EOF pushes or an actual EOF).
-
- Patch based on original proposal and discussion here
- https://bugzilla.kernel.org/show_bug.cgi?id=55991
- by Stas Sergeev <stsp@users.sourceforge.net>
-
- Reported-by: Margarita Manterola <margamanterola@gmail.com>
- Cc: Maximiliano Curia <maxy@gnuservers.com.ar>
- Cc: Pavel Machek <pavel@ucw.cz>
- Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
- Acked-by: Stas Sergeev <stsp@users.sourceforge.net>
- Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
- Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
-diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
-index fdc2ecd..961e6a9 100644
---- a/drivers/tty/n_tty.c
-+++ b/drivers/tty/n_tty.c
-@@ -104,6 +104,7 @@ struct n_tty_data {
-
- /* must hold exclusive termios_rwsem to reset these */
- unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
-+ unsigned char push:1;
-
- /* shared by producer and consumer */
- char read_buf[N_TTY_BUF_SIZE];
-@@ -341,6 +342,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
-
- ldata->erasing = 0;
- bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
-+ ldata->push = 0;
- }
-
- static void n_tty_packet_mode_flush(struct tty_struct *tty)
-@@ -1745,7 +1747,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
-
- if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) {
- bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
-- ldata->line_start = ldata->canon_head = ldata->read_tail;
-+ ldata->line_start = ldata->read_tail;
-+ if (!L_ICANON(tty) || !read_cnt(ldata)) {
-+ ldata->canon_head = ldata->read_tail;
-+ ldata->push = 0;
-+ } else {
-+ set_bit((ldata->read_head - 1) & (N_TTY_BUF_SIZE - 1),
-+ ldata->read_flags);
-+ ldata->canon_head = ldata->read_head;
-+ ldata->push = 1;
-+ }
- ldata->erasing = 0;
- ldata->lnext = 0;
- }
-@@ -1951,6 +1962,12 @@ static int copy_from_read_buf(struct tty_struct *tty,
- * it copies one line of input up to and including the line-delimiting
- * character into the user-space buffer.
- *
-+ * NB: When termios is changed from non-canonical to canonical mode and
-+ * the read buffer contains data, n_tty_set_termios() simulates an EOF
-+ * push (as if C-d were input) _without_ the DISABLED_CHAR in the buffer.
-+ * This causes data already processed as input to be immediately available
-+ * as input although a newline has not been received.
-+ *
- * Called under the atomic_read_lock mutex
- *
- * n_tty_read()/consumer path:
-@@ -1997,7 +2014,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
- n += found;
- c = n;
-
-- if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
-+ if (found && !ldata->push && read_buf(ldata, eol) == __DISABLED_CHAR) {
- n--;
- eof_push = !n && ldata->read_tail != ldata->line_start;
- }
-@@ -2024,7 +2041,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
- ldata->read_tail += c;
-
- if (found) {
-- ldata->line_start = ldata->read_tail;
-+ if (!ldata->push)
-+ ldata->line_start = ldata->read_tail;
-+ else
-+ ldata->push = 0;
- tty_audit_push(tty);
- }
- return eof_push ? -EAGAIN : 0;
-From 27095111cbafd3212c7e9a4a8cef1099b7520ca8 Mon Sep 17 00:00:00 2001
-From: Kieran Clancy <clancy.kieran@gmail.com>
-Date: Fri, 28 Feb 2014 14:12:28 +0000
-Subject: ACPI / EC: Clear stale EC events on Samsung systems
-
-A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc)
-continue to log events during sleep (lid open/close, AC plug/unplug,
-battery level change), which accumulate in the EC until a buffer fills.
-After the buffer is full (tests suggest it holds 8 events), GPEs stop
-being triggered for new events. This state persists on wake or even on
-power cycle, and prevents new events from being registered until the EC
-is manually polled.
-
-This is the root cause of a number of bugs, including AC not being
-detected properly, lid close not triggering suspend, and low ambient
-light not triggering the keyboard backlight. The bug also seemed to be
-responsible for performance issues on at least one user's machine.
-
-Juan Manuel Cabo found the cause of bug and the workaround of polling
-the EC manually on wake.
-
-The loop which clears the stale events is based on an earlier patch by
-Lan Tianyu (see referenced attachment).
-
-This patch:
- - Adds a function acpi_ec_clear() which polls the EC for stale _Q
- events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is
- logged if this limit is reached.
- - Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI
- system vendor is Samsung. This check could be replaced by several
- more specific DMI vendor/product pairs, but it's likely that the bug
- affects more Samsung products than just the five series mentioned
- above. Further, it should not be harmful to run acpi_ec_clear() on
- systems without the bug; it will return immediately after finding no
- data waiting.
- - Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add()
- - Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions()
-
-References: https://bugzilla.kernel.org/show_bug.cgi?id=44161
-References: https://bugzilla.kernel.org/show_bug.cgi?id=45461
-References: https://bugzilla.kernel.org/show_bug.cgi?id=57271
-References: https://bugzilla.kernel.org/attachment.cgi?id=126801
-Suggested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
-Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
-Reviewed-by: Lan Tianyu <tianyu.lan@intel.com>
-Reviewed-by: Dennis Jansen <dennis.jansen@web.de>
-Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
-Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
-Tested-by: Dennis Jansen <dennis.jansen@web.de>
-Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
-Tested-by: San Zamoyski <san@plusnet.pl>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
-diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
-index 959d41a..d7d32c2 100644
---- a/drivers/acpi/ec.c
-+++ b/drivers/acpi/ec.c
-@@ -67,6 +67,8 @@ enum ec_command {
- #define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
- #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
- #define ACPI_EC_MSI_UDELAY 550 /* Wait 550us for MSI EC */
-+#define ACPI_EC_CLEAR_MAX 100 /* Maximum number of events to query
-+ * when trying to clear the EC */
-
- enum {
- EC_FLAGS_QUERY_PENDING, /* Query is pending */
-@@ -116,6 +118,7 @@ EXPORT_SYMBOL(first_ec);
- static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
- static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
- static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
-+static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */
-
- /* --------------------------------------------------------------------------
- Transaction Management
-@@ -440,6 +443,29 @@ acpi_handle ec_get_handle(void)
-
- EXPORT_SYMBOL(ec_get_handle);
-
-+static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 *data);
-+
-+/*
-+ * Clears stale _Q events that might have accumulated in the EC.
-+ * Run with locked ec mutex.
-+ */
-+static void acpi_ec_clear(struct acpi_ec *ec)
-+{
-+ int i, status;
-+ u8 value = 0;
-+
-+ for (i = 0; i < ACPI_EC_CLEAR_MAX; i++) {
-+ status = acpi_ec_query_unlocked(ec, &value);
-+ if (status || !value)
-+ break;
-+ }
-+
-+ if (unlikely(i == ACPI_EC_CLEAR_MAX))
-+ pr_warn("Warning: Maximum of %d stale EC events cleared\n", i);
-+ else
-+ pr_info("%d stale EC events cleared\n", i);
-+}
-+
- void acpi_ec_block_transactions(void)
+ return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
+diff -ur linux-5.3/drivers/scsi/aacraid.org/comminit.c linux-5.3/drivers/scsi/aacraid/comminit.c
+--- linux-5.3/drivers/scsi/aacraid.org/comminit.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/comminit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -41,8 +41,11 @@
{
- struct acpi_ec *ec = first_ec;
-@@ -463,6 +489,10 @@ void acpi_ec_unblock_transactions(void)
- mutex_lock(&ec->mutex);
- /* Allow transactions to be carried out again */
- clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
-+
-+ if (EC_FLAGS_CLEAR_ON_RESUME)
-+ acpi_ec_clear(ec);
-+
- mutex_unlock(&ec->mutex);
- }
-
-@@ -821,6 +851,13 @@ static int acpi_ec_add(struct acpi_device *device)
+ u32 status = 0;
- /* EC is fully operational, allow queries */
- clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
-+
-+ /* Clear stale _Q events if hardware might require that */
-+ if (EC_FLAGS_CLEAR_ON_RESUME) {
-+ mutex_lock(&ec->mutex);
-+ acpi_ec_clear(ec);
-+ mutex_unlock(&ec->mutex);
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ status = src_readl(dev, MUnit.OMR);
+ }
- return ret;
+ return (status & AAC_INT_MODE_MSIX);
}
-@@ -922,6 +959,30 @@ static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
- return 0;
- }
+@@ -349,7 +352,8 @@
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
+- if (aac_is_src(dev) &&
++ if ((dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) &&
+ dev->msi_enabled)
+ aac_set_intx_mode(dev);
+ return status;
+@@ -610,7 +614,8 @@
+ dev->max_fib_size = status[1] & 0xFFE0;
+ host->sg_tablesize = status[2] >> 16;
+ dev->sg_tablesize = status[2] & 0xFFFF;
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (host->can_queue > (status[3] >> 16) -
+ AAC_NUM_MGT_FIB)
+ host->can_queue = (status[3] >> 16) -
+@@ -629,7 +634,9 @@
+ pr_warn("numacb=%d ignored\n", numacb);
+ }
-+/*
-+ * On some hardware it is necessary to clear events accumulated by the EC during
-+ * sleep. These ECs stop reporting GPEs until they are manually polled, if too
-+ * many events are accumulated. (e.g. Samsung Series 5/9 notebooks)
-+ *
-+ * https://bugzilla.kernel.org/show_bug.cgi?id=44161
-+ *
-+ * Ideally, the EC should also be instructed NOT to accumulate events during
-+ * sleep (which Windows seems to do somehow), but the interface to control this
-+ * behaviour is not known at this time.
-+ *
-+ * Models known to be affected are Samsung 530Uxx/535Uxx/540Uxx/550Pxx/900Xxx,
-+ * however it is very likely that other Samsung models are affected.
-+ *
-+ * On systems which don't accumulate _Q events during sleep, this extra check
-+ * should be harmless.
-+ */
-+static int ec_clear_on_resume(const struct dmi_system_id *id)
-+{
-+ pr_debug("Detected system needing EC poll on resume.\n");
-+ EC_FLAGS_CLEAR_ON_RESUME = 1;
-+ return 0;
-+}
-+
- static struct dmi_system_id ec_dmi_table[] __initdata = {
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+ /*
+ * Ok now init the communication subsystem
+diff -ur linux-5.3/drivers/scsi/aacraid.org/commsup.c linux-5.3/drivers/scsi/aacraid/commsup.c
+--- linux-5.3/drivers/scsi/aacraid.org/commsup.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/commsup.c 2019-11-04 09:29:51.321486211 +0100
+@@ -2593,7 +2593,9 @@
+ {
+ int i;
+
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++)
+ free_irq(pci_irq_vector(dev->pdev, i),
+diff -ur linux-5.3/drivers/scsi/aacraid.org/linit.c linux-5.3/drivers/scsi/aacraid/linit.c
+--- linux-5.3/drivers/scsi/aacraid.org/linit.c 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/linit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -1567,8 +1567,9 @@
+ aac_send_shutdown(aac);
+
+ aac_adapter_disable_int(aac);
+-
+- if (aac_is_src(aac)) {
++ if (aac->pdev->device == PMC_DEVICE_S6 ||
++ aac->pdev->device == PMC_DEVICE_S7 ||
++ aac->pdev->device == PMC_DEVICE_S8) {
+ if (aac->max_msix > 1) {
+ for (i = 0; i < aac->max_msix; i++) {
+ free_irq(pci_irq_vector(aac->pdev, i),
+@@ -1858,7 +1859,8 @@
+ aac_adapter_enable_int(dev);
+
+
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+
+ if (dev->msi_enabled)
+
+--- linux-5.7/scripts/ld-version.sh~ 2020-06-01 01:49:15.000000000 +0200
++++ linux-5.7/scripts/ld-version.sh 2020-06-02 08:28:48.303207264 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/awk -f
++#!/bin/awk -f
+ # SPDX-License-Identifier: GPL-2.0
+ # extract linker version number from stdin and turn into single number
{
- ec_skip_dsdt_scan, "Compal JFL92", {
-@@ -965,6 +1026,9 @@ static struct dmi_system_id ec_dmi_table[] __initdata = {
- ec_validate_ecdt, "ASUS hardware", {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),}, NULL},
-+ {
-+ ec_clear_on_resume, "Samsung hardware", {
-+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL},
- {},
- };
-
---
-cgit v0.9.2