---- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
-+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
-@@ -15,7 +15,8 @@
- #include <stdio.h>
- #include <ctype.h>
- #include "modpost.h"
--#include "../../include/generated/autoconf.h"
-+// PLD architectures don't use CONFIG_SYMBOL_PREFIX
-+//#include "../../include/generated/autoconf.h"
- #include "../../include/linux/license.h"
+; https://lkml.org/lkml/2019/7/10/244
+diff -ur linux-5.3/drivers/scsi/aacraid.org/aacraid.h linux-5.3/drivers/scsi/aacraid/aacraid.h
+--- linux-5.3/drivers/scsi/aacraid.org/aacraid.h 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/aacraid.h 2019-11-04 09:29:51.321486211 +0100
+@@ -2740,17 +2740,6 @@
+ int aac_rx_deliver_producer(struct fib * fib);
+ void aac_reinit_aif(struct aac_dev *aac, unsigned int index);
- /* Some toolchains use a `_' prefix for all user symbols. */
-
---- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
-+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
-@@ -9,6 +9,12 @@
- $cc -print-file-name=lib${lib}.${ext} | grep -q /
- if [ $? -eq 0 ]; then
- echo "-l${lib}"
-+ for libt in tinfow tinfo ; do
-+ $cc -print-file-name=lib${libt}.${ext} | grep -q /
-+ if [ $? -eq 0 ]; then
-+ echo "-l${libt}"
-+ fi
-+ done
- exit
- fi
- done
-
-From 30927520dbae297182990bb21d08762bcc35ce1d Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Wed, 9 Sep 2015 21:55:07 -0700
-Subject: [PATCH] tcp_cubic: better follow cubic curve after idle period
-
-Jana Iyengar found an interesting issue on CUBIC :
-
-The epoch is only updated/reset initially and when experiencing losses.
-The delta "t" of now - epoch_start can be arbitrary large after app idle
-as well as the bic_target. Consequentially the slope (inverse of
-ca->cnt) would be really large, and eventually ca->cnt would be
-lower-bounded in the end to 2 to have delayed-ACK slow-start behavior.
-
-This particularly shows up when slow_start_after_idle is disabled
-as a dangerous cwnd inflation (1.5 x RTT) after few seconds of idle
-time.
-
-Jana initial fix was to reset epoch_start if app limited,
-but Neal pointed out it would ask the CUBIC algorithm to recalculate the
-curve so that we again start growing steeply upward from where cwnd is
-now (as CUBIC does just after a loss). Ideally we'd want the cwnd growth
-curve to be the same shape, just shifted later in time by the amount of
-the idle period.
-
-Reported-by: Jana Iyengar <jri@google.com>
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: Yuchung Cheng <ycheng@google.com>
-Signed-off-by: Neal Cardwell <ncardwell@google.com>
-Cc: Stephen Hemminger <stephen@networkplumber.org>
-Cc: Sangtae Ha <sangtae.ha@gmail.com>
-Cc: Lawrence Brakmo <lawrence@brakmo.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_cubic.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
-diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
-index 28011fb1..c6ded6b 100644
---- a/net/ipv4/tcp_cubic.c
-+++ b/net/ipv4/tcp_cubic.c
-@@ -151,6 +151,21 @@ static void bictcp_init(struct sock *sk)
- tcp_sk(sk)->snd_ssthresh = initial_ssthresh;
- }
+-static inline int aac_is_src(struct aac_dev *dev)
+-{
+- u16 device = dev->pdev->device;
+-
+- if (device == PMC_DEVICE_S6 ||
+- device == PMC_DEVICE_S7 ||
+- device == PMC_DEVICE_S8)
+- return 1;
+- return 0;
+-}
+-
+ static inline int aac_supports_2T(struct aac_dev *dev)
+ {
+ return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
+diff -ur linux-5.3/drivers/scsi/aacraid.org/comminit.c linux-5.3/drivers/scsi/aacraid/comminit.c
+--- linux-5.3/drivers/scsi/aacraid.org/comminit.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/comminit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -41,8 +41,11 @@
+ {
+ u32 status = 0;
-+static void bictcp_cwnd_event(struct sock *sk, enum tcp_ca_event event)
-+{
-+ if (event == CA_EVENT_TX_START) {
-+ s32 delta = tcp_time_stamp - tcp_sk(sk)->lsndtime;
-+ struct bictcp *ca = inet_csk_ca(sk);
-+
-+ /* We were application limited (idle) for a while.
-+ * Shift epoch_start to keep cwnd growth to cubic curve.
-+ */
-+ if (ca->epoch_start && delta > 0)
-+ ca->epoch_start += delta;
-+ return;
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ status = src_readl(dev, MUnit.OMR);
+ }
-+}
-+
- /* calculate the cubic root of x using a table lookup followed by one
- * Newton-Raphson iteration.
- * Avg err ~= 0.195%
-@@ -450,6 +465,7 @@ static struct tcp_congestion_ops cubictcp __read_mostly = {
- .cong_avoid = bictcp_cong_avoid,
- .set_state = bictcp_state,
- .undo_cwnd = bictcp_undo_cwnd,
-+ .cwnd_event = bictcp_cwnd_event,
- .pkts_acked = bictcp_acked,
- .owner = THIS_MODULE,
- .name = "cubic",
+ return (status & AAC_INT_MODE_MSIX);
+ }
+
+@@ -349,7 +352,8 @@
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
+- if (aac_is_src(dev) &&
++ if ((dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) &&
+ dev->msi_enabled)
+ aac_set_intx_mode(dev);
+ return status;
+@@ -610,7 +614,8 @@
+ dev->max_fib_size = status[1] & 0xFFE0;
+ host->sg_tablesize = status[2] >> 16;
+ dev->sg_tablesize = status[2] & 0xFFFF;
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (host->can_queue > (status[3] >> 16) -
+ AAC_NUM_MGT_FIB)
+ host->can_queue = (status[3] >> 16) -
+@@ -629,7 +634,9 @@
+ pr_warn("numacb=%d ignored\n", numacb);
+ }
+
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+ /*
+ * Ok now init the communication subsystem
+diff -ur linux-5.3/drivers/scsi/aacraid.org/commsup.c linux-5.3/drivers/scsi/aacraid/commsup.c
+--- linux-5.3/drivers/scsi/aacraid.org/commsup.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/commsup.c 2019-11-04 09:29:51.321486211 +0100
+@@ -2593,7 +2593,9 @@
+ {
+ int i;
+
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++)
+ free_irq(pci_irq_vector(dev->pdev, i),
+diff -ur linux-5.3/drivers/scsi/aacraid.org/linit.c linux-5.3/drivers/scsi/aacraid/linit.c
+--- linux-5.3/drivers/scsi/aacraid.org/linit.c 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/linit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -1567,8 +1567,9 @@
+ aac_send_shutdown(aac);
+
+ aac_adapter_disable_int(aac);
+-
+- if (aac_is_src(aac)) {
++ if (aac->pdev->device == PMC_DEVICE_S6 ||
++ aac->pdev->device == PMC_DEVICE_S7 ||
++ aac->pdev->device == PMC_DEVICE_S8) {
+ if (aac->max_msix > 1) {
+ for (i = 0; i < aac->max_msix; i++) {
+ free_irq(pci_irq_vector(aac->pdev, i),
+@@ -1858,7 +1859,8 @@
+ aac_adapter_enable_int(dev);
+
+
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+
+ if (dev->msi_enabled)
+
+--- linux-5.7/scripts/ld-version.sh~ 2020-06-01 01:49:15.000000000 +0200
++++ linux-5.7/scripts/ld-version.sh 2020-06-02 08:28:48.303207264 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/awk -f
++#!/bin/awk -f
+ # SPDX-License-Identifier: GPL-2.0
+ # extract linker version number from stdin and turn into single number
+ {