/* Some toolchains use a `_' prefix for all user symbols. */
-From: Stephen Hemminger <shemminger@vyatta.com>
-
-Some BIOS's don't setup power management correctly (what else is
-new) and don't allow use of PCI Express power control. Add a special
-exception module parameter to allow working around this issue.
-Based on slightly different patch by Knut Petersen.
-
-Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
-Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
----
-Patch against -net (ie. 3.3.0)
-
---- a/drivers/net/ethernet/marvell/sky2.c 2012-01-10 10:56:56.855156017 -0800
-+++ b/drivers/net/ethernet/marvell/sky2.c 2012-03-21 08:25:52.400929532 -0700
-@@ -95,6 +95,10 @@ static int disable_msi = 0;
- module_param(disable_msi, int, 0);
- MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
-+static int legacy_pme = 0;
-+module_param(legacy_pme, int, 0);
-+MODULE_PARM_DESC(legacy_pme, "Legacy power management");
-+
- static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
-@@ -867,6 +871,13 @@ static void sky2_wol_init(struct sky2_po
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
-
-+ /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */
-+ if (legacy_pme) {
-+ u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+ }
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- sky2_read32(hw, B0_CTST);
-
-
-The RCU problem is likely to be a separate issue. It might even be a
-result of the use-after-free problem with the elevator.
-
-At any rate, it's clear that the crash in the refcounting log you
-posted occurred because scsi_setup_blk_pc_cmnd() called
-scsi_prep_state_check(), which tried to dereference the NULL pointer.
-
-Would you like to try this patch to see if it fixes the problem? As I
-said before, I'm not certain it's the best thing to do, but it worked
-on my system.
-
-Alan Stern
-
-
-Index: usb-3.0/drivers/scsi/scsi_lib.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_lib.c
-+++ usb-3.0/drivers/scsi/scsi_lib.c
-@@ -1247,6 +1247,8 @@ int scsi_prep_fn(struct request_queue *q
- struct scsi_device *sdev = q->queuedata;
- int ret = BLKPREP_KILL;
-
-+ if (!sdev)
-+ return ret;
- if (req->cmd_type == REQ_TYPE_BLOCK_PC)
- ret = scsi_setup_blk_pc_cmnd(sdev, req);
- return scsi_prep_return(q, req, ret);
-Index: usb-3.0/drivers/scsi/scsi_sysfs.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_sysfs.c
-+++ usb-3.0/drivers/scsi/scsi_sysfs.c
-@@ -322,6 +322,8 @@ static void scsi_device_dev_release_user
- kfree(evt);
- }
-
-+ /* Freeing the queue signals to block that we're done */
-+ scsi_free_queue(sdev->request_queue);
- blk_put_queue(sdev->request_queue);
- /* NULL queue means the device can't be used */
- sdev->request_queue = NULL;
-@@ -936,8 +938,6 @@ void __scsi_remove_device(struct scsi_de
- /* cause the request function to reject all I/O requests */
- sdev->request_queue->queuedata = NULL;
-
-- /* Freeing the queue signals to block that we're done */
-- scsi_free_queue(sdev->request_queue);
- put_device(dev);
- }
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at http://www.tux.org/lkml/
--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
@@ -9,6 +9,12 @@
exit
fi
done
-
-
-
-
-From: Vasiliy Kulikov <segoon@openwall.com>
-Date: Fri, 23 Mar 2012 20:56:42 +0400
-Subject: [PATCH] proc: fix mount -t proc -o AAA
-
-proc_parse_options() inside of proc_mount() runs only once at the boot
-time without any given options. So, following umount(2)+mount(2) ignore
-mount options: proc_parse_options() is not called as ->s_root is already
-initialized. To fix that parse mount options unconditionally.
-
-Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
-Reported-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com>
----
- fs/proc/root.c | 9 +++++----
- 1 files changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/fs/proc/root.c b/fs/proc/root.c
-index 46a15d8..eed44bf 100644
---- a/fs/proc/root.c
-+++ b/fs/proc/root.c
-@@ -115,12 +115,13 @@ static struct dentry *proc_mount(struct file_system_type *fs_type,
- if (IS_ERR(sb))
- return ERR_CAST(sb);
-
-+ if (!proc_parse_options(options, ns)) {
-+ deactivate_locked_super(sb);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
- if (!sb->s_root) {
- sb->s_flags = flags;
-- if (!proc_parse_options(options, ns)) {
-- deactivate_locked_super(sb);
-- return ERR_PTR(-EINVAL);
-- }
- err = proc_fill_super(sb);
- if (err) {
- deactivate_locked_super(sb);
---
-1.7.0.4
-
-diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
-index 7a0c800..ec5ebbb 100644
---- a/drivers/net/ethernet/realtek/r8169.c
-+++ b/drivers/net/ethernet/realtek/r8169.c
-@@ -4103,6 +4103,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
- /* Get MAC address */
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = RTL_R8(MAC0 + i);
-+
-+ if (!is_valid_ether_addr(dev->dev_addr)) {
-+ /* Report it and use a random ethernet address instead */
-+ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
-+ random_ether_addr(dev->dev_addr);
-+ netdev_info(dev, "Using random MAC address: %pM\n",
-+ dev->dev_addr);
-+ }
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
- SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
---
-1.7.7.3
-
-
\ No newline at end of file
+--- linux-4.14/security/selinux/include/classmap.h 2017-11-12 19:46:13.000000000 +0100
++++ linux-4.20/security/selinux/include/classmap.h 2018-12-24 00:55:59.000000000 +0100
+@@ -238,9 +238,11 @@
+ { "access", NULL } },
+ { "infiniband_endport",
+ { "manage_subnet", NULL } },
++ { "xdp_socket",
++ { COMMON_SOCK_PERMS, NULL } },
+ { NULL }
+ };
+
+-#if PF_MAX > 44
++#if PF_MAX > 45
+ #error New address family defined, please update secclass_map.
+ #endif
projects / packages / kernel.git / blobdiff