2 # - BUG: you can't set in /etc/mdadm.conf:
3 # DEVICE partitions containers
4 # (which is default BTW if none set). Generation of initrd will fail
6 Summary: Creates an initial ramdisk image for preloading modules
7 Summary(pl.UTF-8): Narzędzie do tworzenia inicjalnego ramdysku używanego przy starcie systemu
12 Group: Applications/System
13 Source0: %{name}-%{version}.tar.gz
14 # Source0-md5: 46e94f3ac027661f49a3e23973f91af5
15 Patch0: %{name}-romfs.patch
16 Patch1: %{name}-gzip-compressor.patch
17 Patch2: %{name}-svn.patch
18 URL: http://svn.pld-linux.org/trac/svn/wiki/packages/geninitrd
19 BuildRequires: xmlto >= 0:0.0.18-1
20 Requires: /usr/bin/ldd
22 Requires: busybox-initrd >= 1.1.0
28 Requires: mktemp >= 1.5-8
30 Requires: pci-database >= 0.4
31 Requires: rc-scripts >= 0.2.7
33 Requires: virtual(module-tools)
34 %if "%{pld_release}" == "ti"
36 Requires: mdadm-initrd >= 1.12.0-1
38 # otherwise LVM subsystem is not enabled in geninitrd
40 # without this softraid installations of PLD fail
41 Suggests: mdadm-initrd >= 1.12.0-1
46 %if "%{pld_release}" != "ac"
47 Suggests: util-linux-initrd
50 %if "%{pld_release}" == "ac"
51 Conflicts: grubby < 5.0.4-3.1
53 Conflicts: grubby < 6.0.24-3
56 Conflicts: module-init-tools < 3.2.2-6
57 Conflicts: udev-initrd < 1:168
58 Conflicts: xz < 4.999.9
60 BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
63 Geninitrd creates filesystem images for use as initial ramdisk
64 (initrd) images. These ramdisk images are often used to preload the
65 block device modules (SCSI or RAID) needed to access the root
68 In other words, generic kernels can be built without drivers for any
69 SCSI adapters which load the SCSI driver as a module. Since the kernel
70 needs to read those modules, but in this case it isn't able to address
71 the SCSI adapter, an initial ramdisk is used. The initial ramdisk is
72 loaded by the operating system loader (normally LILO) and is available
73 to the kernel as soon as the ramdisk is loaded. The ramdisk image
74 loads the proper SCSI adapter and allows the kernel to mount the root
75 filesystem. The geninitrd program creates such a ramdisk using
76 information found in the /etc/modules.conf file.
78 %description -l pl.UTF-8
79 Geninitrd służy do tworzenia obrazu systemu plikowego używanego jako
80 inicjalny ramdysk (initrd), z którego przy starcie systemu są ładowane
81 moduły kernela z obsługą urządzeń których obsługa nie jest
82 wkompilowana w kernel. Zazwyczaj modułami ładowanymi z inicjalnego
83 systemu plikowego są sterowniki SCSI, IDE czy też RAID po to żeby w
84 dalszej części inicjacji systemu był możliwy dostęp do głównego
85 systemu plikowego (root fs).
87 Dzięki initrd jest możliwe używanie dystrybucyjnego kernela w którym
88 wkompilowana jest minimalna ilość obsługi różnych urządzeń, a reszta
89 kodu obsługi sterowników SCSI, IDE czy RAID jest doczytywana w trakcie
90 startu z initrd. Skrypt geninitrd generuje obraz ramdysku na podstawie
91 bieżących informacji zawartych w /etc/modules.conf.
95 %if "%{pld_release}" == "ti"
105 rm -rf $RPM_BUILD_ROOT
107 DESTDIR=$RPM_BUILD_ROOT
110 rm -rf $RPM_BUILD_ROOT
113 %defattr(644,root,root,755)
115 %config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/geninitrd
116 %attr(755,root,root) /sbin/geninitrd
117 %{_mandir}/man8/geninitrd.8*
120 /lib/geninitrd/functions
121 /lib/geninitrd/mod-*.sh
122 %attr(755,root,root) /lib/geninitrd/extract-ikconfig
124 %dir /lib/geninitrd/udev-rules
125 /lib/geninitrd/udev-rules/*.rules