2 # - BUG: you can't set in /etc/mdadm.conf:
3 # DEVICE partitions containers
4 # (which is default BTW if none set). Generation of initrd will fail
6 Summary: Creates an initial ramdisk image for preloading modules
7 Summary(pl.UTF-8): Narzędzie do tworzenia inicjalnego ramdysku używanego przy starcie systemu
12 Group: Applications/System
13 Source0: %{name}-%{version}.tar.gz
14 # Source0-md5: 7bab5ccd79af683dd3162f660e552332
15 Patch0: %{name}-romfs.patch
16 Patch1: %{name}-gzip-compressor.patch
17 #Patch2: %{name}-svn.patch
18 URL: http://svn.pld-linux.org/trac/svn/wiki/packages/geninitrd
19 BuildRequires: xmlto >= 0:0.0.18-1
20 Requires: /usr/bin/ldd
22 Requires: busybox-initrd >= 1.1.0
29 Requires: mktemp >= 1.5-8
31 Requires: pci-database >= 0.4
32 Requires: rc-scripts >= 0.2.7
34 Requires: virtual(module-tools)
35 %if "%{pld_release}" == "ti"
37 Requires: mdadm-initrd >= 1.12.0-1
39 # otherwise LVM subsystem is not enabled in geninitrd
41 # without this softraid installations of PLD fail
42 Suggests: mdadm-initrd >= 1.12.0-1
46 %if "%{pld_release}" != "ac"
47 Suggests: util-linux-initrd
50 %if "%{pld_release}" == "ac"
51 Conflicts: grubby < 5.0.4-3.1
53 Conflicts: grubby < 6.0.24-3
55 Conflicts: module-init-tools < 3.2.2-6
56 Conflicts: udev-initrd < 1:168
57 Conflicts: xz < 4.999.9
59 BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
62 Geninitrd creates filesystem images for use as initial ramdisk
63 (initrd) images. These ramdisk images are often used to preload the
64 block device modules (SCSI or RAID) needed to access the root
67 In other words, generic kernels can be built without drivers for any
68 SCSI adapters which load the SCSI driver as a module. Since the kernel
69 needs to read those modules, but in this case it isn't able to address
70 the SCSI adapter, an initial ramdisk is used. The initial ramdisk is
71 loaded by the operating system loader (normally LILO) and is available
72 to the kernel as soon as the ramdisk is loaded. The ramdisk image
73 loads the proper SCSI adapter and allows the kernel to mount the root
74 filesystem. The geninitrd program creates such a ramdisk using
75 information found in the /etc/modules.conf file.
77 %description -l pl.UTF-8
78 Geninitrd służy do tworzenia obrazu systemu plikowego używanego jako
79 inicjalny ramdysk (initrd), z którego przy starcie systemu są ładowane
80 moduły kernela z obsługą urządzeń których obsługa nie jest
81 wkompilowana w kernel. Zazwyczaj modułami ładowanymi z inicjalnego
82 systemu plikowego są sterowniki SCSI, IDE czy też RAID po to żeby w
83 dalszej części inicjacji systemu był możliwy dostęp do głównego
84 systemu plikowego (root fs).
86 Dzięki initrd jest możliwe używanie dystrybucyjnego kernela w którym
87 wkompilowana jest minimalna ilość obsługi różnych urządzeń, a reszta
88 kodu obsługi sterowników SCSI, IDE czy RAID jest doczytywana w trakcie
89 startu z initrd. Skrypt geninitrd generuje obraz ramdysku na podstawie
90 bieżących informacji zawartych w /etc/modules.conf.
94 %if "%{pld_release}" == "ti"
104 rm -rf $RPM_BUILD_ROOT
106 DESTDIR=$RPM_BUILD_ROOT
109 rm -rf $RPM_BUILD_ROOT
112 %defattr(644,root,root,755)
114 %config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/geninitrd
115 %attr(755,root,root) /sbin/geninitrd
116 %{_mandir}/man8/geninitrd.8*
119 /lib/geninitrd/functions
120 /lib/geninitrd/mod-*.sh
121 %attr(755,root,root) /lib/geninitrd/extract-ikconfig
123 %dir /lib/geninitrd/udev-rules
124 /lib/geninitrd/udev-rules/*.rules