2 ## httpd.conf -- Apache HTTP server configuration file
6 # Based upon the NCSA server configuration files originally by Rob McCool.
8 # This is the main Apache server configuration file. It contains the
9 # configuration directives that give the server its instructions.
10 # See <URL:http://www.apache.org/docs/> for detailed information about
13 # Do NOT simply read the instructions in here without understanding
14 # what they do. They're here only as hints or reminders. If you are unsure
15 # consult the online docs. You have been warned.
17 # After this file is processed, the server will look for and process
18 # /etc/httpd/srm.conf and then /etc/httpd/access.conf
19 # unless you have overridden these with ResourceConfig and/or
20 # AccessConfig directives here.
22 # The configuration directives are grouped into three basic sections:
23 # 1. Directives that control the operation of the Apache server process as a
24 # whole (the 'global environment').
25 # 2. Directives that define the parameters of the 'main' or 'default' server,
26 # which responds to requests that aren't handled by a virtual host.
27 # These directives also provide default values for the settings
28 # of all virtual hosts.
29 # 3. Settings for virtual hosts, which allow Web requests to be sent to
30 # different IP addresses or hostnames and have them handled by the
31 # same Apache server process.
33 # Configuration and logfile names: If the filenames you specify for many
34 # of the server's control files begin with "/" (or "drive:/" for Win32), the
35 # server will use that explicit path. If the filenames do *not* begin
36 # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
37 # with ServerRoot set to "/usr/local/apache" will be interpreted by the
38 # server as "/usr/local/apache/logs/foo.log".
41 ### Section 1: Global Environment
43 # The directives in this section affect the overall operation of Apache,
44 # such as the number of concurrent requests it can handle or where it
45 # can find its configuration files.
49 # ServerType is either inetd, or standalone. Inetd mode is only supported on
55 # ServerRoot: The top of the directory tree under which the server's
56 # configuration, error, and log files are kept.
58 # NOTE! If you intend to place this on an NFS (or otherwise network)
59 # mounted filesystem then please read the LockFile documentation
60 # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
61 # you will save yourself a lot of trouble.
63 # Do NOT add a slash at the end of the directory path.
68 # The LockFile directive sets the path to the lockfile used when Apache
69 # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
70 # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
71 # its default value. The main reason for changing it is if the logs
72 # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
73 # DISK. The PID of the main server process is automatically appended to
76 LockFile /var/run/httpd.lock
79 # PidFile: The file in which the server should record its process
80 # identification number when it starts.
82 PidFile /var/run/httpd.pid
85 # ScoreBoardFile: File used to store internal server process information.
86 # Not all architectures require this. But if yours does (you'll know because
87 # this file will be created when you run Apache) then you *must* ensure that
88 # no two invocations of Apache share the same scoreboard file.
90 ScoreBoardFile /var/run/httpd.scoreboard
93 # In the standard configuration, the server will process this file,
94 # srm.conf, and access.conf in that order. The latter two files are
95 # now distributed empty, as it is recommended that all directives
96 # be kept in a single file for simplicity. The commented-out values
97 # below are the built-in defaults. You can have the server ignore
98 # these files altogether by using "/dev/null" (for Unix) or
99 # "nul" (for Win32) for the arguments to the directives.
101 #ResourceConfig /etc/httpd/srm.conf
102 AccessConfig /etc/httpd/access.conf
105 # Timeout: The number of seconds before receives and sends time out.
110 # KeepAlive: Whether or not to allow persistent connections (more than
111 # one request per connection). Set to "Off" to deactivate.
116 # MaxKeepAliveRequests: The maximum number of requests to allow
117 # during a persistent connection. Set to 0 to allow an unlimited amount.
118 # We recommend you leave this number high, for maximum performance.
120 MaxKeepAliveRequests 100
123 # KeepAliveTimeout: Number of seconds to wait for the next request from the
124 # same client on the same connection.
129 # Server-pool size regulation. Rather than making you guess how many
130 # server processes you need, Apache dynamically adapts to the load it
131 # sees --- that is, it tries to maintain enough server processes to
132 # handle the current load, plus a few spare servers to handle transient
133 # load spikes (e.g., multiple simultaneous requests from a single
136 # It does this by periodically checking how many servers are waiting
137 # for a request. If there are fewer than MinSpareServers, it creates
138 # a new spare. If there are more than MaxSpareServers, some of the
139 # spares die off. The default values are probably OK for most sites.
145 # Number of servers to start initially --- should be a reasonable ballpark
151 # Limit on total number of servers running, i.e., limit on the number
152 # of clients who can simultaneously connect --- if this limit is ever
153 # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
154 # It is intended mainly as a brake to keep a runaway server from taking
155 # the system with it as it spirals down...
160 # MaxRequestsPerChild: the number of requests each child process is
161 # allowed to process before the child dies. The child will exit so
162 # as to avoid problems after prolonged use when Apache (and maybe the
163 # libraries it uses) leak memory or other resources. On most systems, this
164 # isn't really needed, but a few (such as Solaris) do have notable leaks
167 MaxRequestsPerChild 30
170 # Listen: Allows you to bind Apache to specific IP addresses and/or
171 # ports, in addition to the default. See also the <VirtualHost>
175 #Listen 12.34.56.78:80
178 # BindAddress: You can support virtual hosts with this option. This directive
179 # is used to tell the server which IP address to listen to. It can either
180 # contain "*", an IP address, or a fully qualified Internet domain name.
181 # See also the <VirtualHost> and Listen directives.
186 # Dynamic Shared Object (DSO) Support
188 # To be able to use the functionality of a module which was built as a DSO you
189 # have to place corresponding `LoadModule' lines at this location so the
190 # directives contained in it are actually available _before_ they are used.
191 # Please read the file README.DSO in the Apache 1.3 distribution for more
192 # details about the DSO mechanism and run `httpd -l' for the list of already
193 # built-in (statically linked and thus always available) modules in your httpd
196 # Note: The order is which modules are loaded is important. Don't change
197 # the order below without expert advice.
200 # LoadModule foo_module libexec/mod_foo.so
202 # Reconstruction of the complete module list from all available modules
203 # (static and shared ones) to achieve correct module execution order.
204 # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
209 # ExtendedStatus controls whether Apache will generate "full" status
210 # information (ExtendedStatus On) or just basic information (ExtendedStatus
211 # Off) when the "server-status" handler is called. The default is Off.
215 ### Section 2: 'Main' server configuration
217 # The directives in this section set up the values used by the 'main'
218 # server, which responds to any requests that aren't handled by a
219 # <VirtualHost> definition. These values also provide defaults for
220 # any <VirtualHost> containers you may define later in the file.
222 # All of these directives may appear inside <VirtualHost> containers,
223 # in which case these default settings will be overridden for the
224 # virtual host being defined.
228 # If your ServerType directive (set earlier in the 'Global Environment'
229 # section) is set to "inetd", the next few directives don't have any
230 # effect since their settings are defined by the inetd configuration.
231 # Skip ahead to the ServerAdmin directive.
235 # Port: The port to which the standalone server listens. For
236 # ports < 1023, you will need httpd to be run as root initially.
241 # If you wish httpd to run as a different user or group, you must run
242 # httpd as root initially and it will switch.
244 # User/Group: The name (or #number) of the user/group to run httpd as.
245 # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
246 # . On HPUX you may not be able to use shared memory as nobody, and the
247 # suggested workaround is to create a user www and use that user.
248 # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
249 # when the value of (unsigned)Group is above 60000;
250 # don't use Group on these systems!
256 # ServerAdmin: Your address, where problems with the server should be
257 # e-mailed. This address appears on some server-generated pages, such
258 # as error documents.
260 ServerAdmin admin@your_domain.org
263 # ServerName allows you to set a host name which is sent back to clients for
264 # your server if it's different than the one the program would get (i.e., use
265 # "www" instead of the host's real name).
267 # Note: You cannot just invent host names and hope they work. The name you
268 # define here must be a valid DNS name for your host. If you don't understand
269 # this, ask your network administrator.
270 # If your host doesn't have a registered DNS name, enter its IP address here.
271 # You will have to access it by its address (e.g., http://123.45.67.89/)
272 # anyway, and this will make redirections work in a sensible way.
274 #ServerName new.host.name
277 # DocumentRoot: The directory out of which you will serve your
278 # documents. By default, all requests are taken from this directory, but
279 # symbolic links and aliases may be used to point to other locations.
281 DocumentRoot "/home/httpd/html"
284 # Each directory to which Apache has access, can be configured with respect
285 # to which services and features are allowed and/or disabled in that
286 # directory (and its subdirectories).
288 # First, we configure the "default" to be a very restrictive set of
292 Options FollowSymLinks
297 # Note that from this point forward you must specifically allow
298 # particular features to be enabled - so if something's not working as
299 # you might expect, make sure that you have specifically enabled it
304 # This should be changed to whatever you set DocumentRoot to.
306 <Directory "/home/httpd/html">
309 # This may also be "None", "All", or any combination of "Indexes",
310 # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
312 # Note that "MultiViews" must be named *explicitly* --- "Options All"
313 # doesn't give it to you.
315 Options Indexes FollowSymLinks
318 # This controls which options the .htaccess files in directories can
319 # override. Can also be "All", or any combination of "Options", "FileInfo",
320 # "AuthConfig", and "Limit"
325 # Controls who can get stuff from this server.
332 # UserDir: The name of the directory which is appended onto a user's home
333 # directory if a ~user request is received.
338 # Control access to UserDir directories. The following is an example
339 # for a site where these directories are restricted to read-only.
341 #<Directory /*/public_html>
342 # AllowOverride FileInfo AuthConfig Limit
343 # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
344 # <Limit GET POST OPTIONS PROPFIND>
348 # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
355 # DirectoryIndex: Name of the file or files to use as a pre-written HTML
356 # directory index. Separate multiple entries with spaces.
358 DirectoryIndex index.html index.htm index.shtml index.cgi
361 # AccessFileName: The name of the file to look for in each directory
362 # for access control information.
364 AccessFileName .htaccess
367 # The following lines prevent .htaccess files from being viewed by
368 # Web clients. Since .htaccess files often contain authorization
369 # information, access is disallowed for security reasons. Comment
370 # these lines out if you want Web visitors to see the contents of
371 # .htaccess files. If you change the AccessFileName directive above,
372 # be sure to make the corresponding changes here.
380 # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
381 # document that was negotiated on the basis of content. This asks proxy
382 # servers not to cache the document. Uncommenting the following line disables
383 # this behavior, and proxies will be allowed to cache the documents.
388 # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
389 # Apache needs to construct a self-referencing URL (a URL that refers back
390 # to the server the response is coming from) it will use ServerName and
391 # Port to form a "canonical" name. With this setting off, Apache will
392 # use the hostname:port that the client supplied, when possible. This
393 # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
398 # TypesConfig describes where the mime.types file (or equivalent) is
399 # to be found. /etc/mime.types is provided by mailcap package.
401 TypesConfig /etc/mime.types
404 # DefaultType is the default MIME type the server will use for a document
405 # if it cannot otherwise determine one, such as from filename extensions.
406 # If your server contains mostly text or HTML documents, "text/plain" is
407 # a good value. If most of your content is binary, such as applications
408 # or images, you may want to use "application/octet-stream" instead to
409 # keep browsers from trying to display binary files as though they are
412 DefaultType text/plain
415 # The mod_mime_magic module allows the server to use various hints from the
416 # contents of the file itself to determine its type. The MIMEMagicFile
417 # directive tells the module where the hint definitions are located.
418 # mod_mime_magic is not part of the default server (you have to add
419 # it yourself with a LoadModule [see the DSO paragraph in the 'Global
420 # Environment' section], or recompile the server and include mod_mime_magic
421 # as part of the configuration), so it's enclosed in an <IfModule> container.
422 # This means that the MIMEMagicFile directive will only be processed if the
423 # module is part of the server.
425 <IfModule mod_mime_magic.c>
426 MIMEMagicFile /etc/httpd/magic
430 # HostnameLookups: Log the names of clients or just their IP addresses
431 # e.g., www.apache.org (on) or 204.62.129.132 (off).
432 # The default is off because it'd be overall better for the net if people
433 # had to knowingly turn this feature on, since enabling it means that
434 # each client request will result in AT LEAST one lookup request to the
440 # ErrorLog: The location of the error log file.
441 # If you do not specify an ErrorLog directive within a <VirtualHost>
442 # container, error messages relating to that virtual host will be
443 # logged here. If you *do* define an error logfile for a <VirtualHost>
444 # container, that host's errors will be logged there and not here.
446 ErrorLog /var/log/httpd/error_log
449 # LogLevel: Control the number of messages logged to the error_log.
450 # Possible values include: debug, info, notice, warn, error, crit,
456 # The following directives define some format nicknames for use with
457 # a CustomLog directive (see below).
459 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
460 LogFormat "%h %l %u %t \"%r\" %>s %b" common
461 LogFormat "%{Referer}i -> %U" referer
462 LogFormat "%{User-agent}i" agent
465 # The location and format of the access logfile (Common Logfile Format).
466 # If you do not define any access logfiles within a <VirtualHost>
467 # container, they will be logged here. Contrariwise, if you *do*
468 # define per-<VirtualHost> access logfiles, transactions will be
469 # logged therein and *not* in this file.
471 CustomLog /var/log/httpd/access_log common
474 # If you would like to have agent and referer logfiles, uncomment the
475 # following directives.
477 CustomLog /var/log/httpd/referer_log referer
478 CustomLog /var/log/httpd/agent_log agent
481 # If you prefer a single logfile with access, agent, and referer information
482 # (Combined Logfile Format) you can use the following directive.
484 #CustomLog /var/log/httpd/access_log combined
487 # Optionally add a line containing the server version and virtual host
488 # name to server-generated pages (error documents, FTP directory listings,
489 # mod_status and mod_info output etc., but not CGI generated documents).
490 # Set to "EMail" to also include a mailto: link to the ServerAdmin.
491 # Set to one of: On | Off | EMail
493 ServerSignature Email
496 # Aliases: Add here as many aliases as you need (with no limit). The format is
497 # Alias fakename realname
499 # Note that if you include a trailing / on fakename then the server will
500 # require it to be present in the URL. So "/icons" isn't aliased in this
501 # example, only "/icons/"..
503 Alias /icons/ "/home/httpd/icons/"
505 <Directory "/home/httpd/icons">
506 Options Indexes MultiViews
513 # ScriptAlias: This controls which directories contain server scripts.
514 # ScriptAliases are essentially the same as Aliases, except that
515 # documents in the realname directory are treated as applications and
516 # run by the server when requested rather than as documents sent to the client.
517 # The same rules about trailing "/" apply to ScriptAlias directives as to
520 ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"
523 # "/home/httpd/cgi-bin" should be changed to whatever your ScriptAliased
524 # CGI directory exists, if you have that configured.
526 <Directory "/home/httpd/cgi-bin">
534 # Redirect allows you to tell clients about documents which used to exist in
535 # your server's namespace, but do not anymore. This allows you to tell the
536 # clients where to look for the relocated document.
537 # Format: Redirect old-URI new-URL
541 # Directives controlling the display of server-generated directory listings.
545 # FancyIndexing is whether you want fancy directory indexing or standard
547 IndexOptions FancyIndexing
550 # AddIcon* directives tell the server which icon to show for different
551 # files or filename extensions. These are only displayed for
552 # FancyIndexed directories.
554 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
556 AddIconByType (TXT,/icons/text.gif) text/*
557 AddIconByType (IMG,/icons/image2.gif) image/*
558 AddIconByType (SND,/icons/sound2.gif) audio/*
559 AddIconByType (VID,/icons/movie.gif) video/*
561 AddIcon /icons/binary.gif .bin .exe
562 AddIcon /icons/binhex.gif .hqx
563 AddIcon /icons/tar.gif .tar
564 AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
565 AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
566 AddIcon /icons/a.gif .ps .ai .eps
567 AddIcon /icons/layout.gif .html .shtml .htm .pdf
568 AddIcon /icons/text.gif .txt
569 AddIcon /icons/c.gif .c
570 AddIcon /icons/p.gif .pl .py
571 AddIcon /icons/f.gif .for
572 AddIcon /icons/dvi.gif .dvi
573 AddIcon /icons/uuencoded.gif .uu
574 AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
575 AddIcon /icons/tex.gif .tex
576 AddIcon /icons/bomb.gif core
578 AddIcon /icons/back.gif ..
579 AddIcon /icons/hand.right.gif README
580 AddIcon /icons/folder.gif ^^DIRECTORY^^
581 AddIcon /icons/blank.gif ^^BLANKICON^^
584 # DefaultIcon is which icon to show for files which do not have an icon
587 DefaultIcon /icons/unknown.gif
590 # AddDescription allows you to place a short description after a file in
591 # server-generated indexes. These are only displayed for FancyIndexed
593 # Format: AddDescription "description" filename
595 AddDescription "GZIP compressed document" .gz
596 AddDescription "tar archive" .tar
597 AddDescription "GZIP compressed tar archive" .tgz
600 # ReadmeName is the name of the README file the server will look for by
601 # default, and append to directory listings.
603 # HeaderName is the name of a file which should be prepended to
606 # The server will first look for name.html and include it if found.
607 # If name.html doesn't exist, the server will then look for name.txt
608 # and include it as plaintext if found.
614 # IndexIgnore is a set of filenames which directory indexing should ignore
615 # and not include in the listing. Shell-style wildcarding is permitted.
617 IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
620 # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
621 # information on the fly. Note: Not all browsers support this.
622 # Despite the name similarity, the following Add* directives have nothing
623 # to do with the FancyIndexing customization directives above.
625 AddEncoding x-compress Z
626 AddEncoding x-gzip gz
629 # AddLanguage allows you to specify the language of a document. You can
630 # then use content negotiation to give a browser a file in a language
631 # it can understand. Note that the suffix does not have to be the same
632 # as the language keyword --- those with documents in Polish (whose
633 # net-standard language code is pl) may wish to use "AddLanguage pl .po"
634 # to avoid the ambiguity with the common suffix for perl scripts.
644 # LanguagePriority allows you to give precedence to some languages
645 # in case of a tie during content negotiation.
646 # Just list the languages in decreasing order of preference.
648 LanguagePriority en pl fr de
651 # AddType allows you to tweak mime.types without actually editing it, or to
652 # make certain files to be certain types.
654 # For example, the PHP3 module (not part of the Apache distribution - see
655 # http://www.php.net) will typically use:
657 #AddType application/x-httpd-php3 .php3
658 #AddType application/x-httpd-php3-source .phps
660 #AddType application/x-httpd-php .php
661 #AddType application/x-httpd-php-source .phps
664 # AddHandler allows you to map certain file extensions to "handlers",
665 # actions unrelated to filetype. These can be either built into the server
666 # or added with the Action command (see below)
668 # If you want to use server side includes, or CGI outside
669 # ScriptAliased directories, uncomment the following lines.
671 # To use CGI scripts:
673 AddHandler cgi-script .cgi
676 # To use server-parsed HTML files
678 AddType text/html .shtml
679 AddHandler server-parsed .shtml
682 # Uncomment the following line to enable Apache's send-asis HTTP file
685 AddHandler send-as-is asis
688 # If you wish to use server-parsed imagemap files, use
690 AddHandler imap-file map
693 # To enable type maps, you might want to use
695 AddHandler type-map var
698 # Action lets you define media types that will execute a script whenever
699 # a matching file is called. This eliminates the need for repeated URL
700 # pathnames for oft-used CGI file processors.
701 # Format: Action media/type /cgi-script/location
702 # Format: Action handler-name /cgi-script/location
706 # MetaDir: specifies the name of the directory in which Apache can find
707 # meta information files. These files contain additional HTTP headers
708 # to include when sending the document
713 # MetaSuffix: specifies the file name suffix for the file containing the
719 # Customizable error response (Apache style)
720 # these come in three flavors
723 #ErrorDocument 500 "The server made a boo boo.
724 # n.b. the (") marks it as text, it does not get output
727 #ErrorDocument 404 /missing.html
728 # to redirect to local URL /missing.html
729 #ErrorDocument 404 /cgi-bin/missing_handler.pl
730 # N.B.: You can redirect to a script or a document using server-side-includes.
732 # 3) external redirects
733 #ErrorDocument 402 http://some.other_server.com/subscription_info.html
734 # N.B.: Many of the environment variables associated with the original
735 # request will *not* be available to such a script.
738 # The following directives modify normal HTTP response behavior.
739 # The first directive disables keepalive for Netscape 2.x and browsers that
740 # spoof it. There are known problems with these browser implementations.
741 # The second directive is for Microsoft Internet Explorer 4.0b2
742 # which has a broken HTTP/1.1 implementation and does not properly
743 # support keepalive when it is used on 301 or 302 (redirect) responses.
745 BrowserMatch "Mozilla/2" nokeepalive
746 BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
749 # The following directive disables HTTP/1.1 responses to browsers which
750 # are in violation of the HTTP/1.0 spec by not being able to grok a
751 # basic 1.1 response.
753 BrowserMatch "RealPlayer 4\.0" force-response-1.0
754 BrowserMatch "Java/1\.0" force-response-1.0
755 BrowserMatch "JDK/1\.0" force-response-1.0
757 Alias /errordocs/ "/home/httpd/errordocs/"
759 ErrorDocument 400 /errordocs/400.shtml
760 ErrorDocument 401 /errordocs/401.shtml
761 ErrorDocument 403 /errordocs/403.shtml
762 ErrorDocument 404 /errordocs/404.shtml
763 ErrorDocument 405 /errordocs/405.shtml
764 ErrorDocument 406 /errordocs/406.shtml
765 ErrorDocument 408 /errordocs/408.shtml
766 ErrorDocument 410 /errordocs/410.shtml
767 ErrorDocument 411 /errordocs/411.shtml
768 ErrorDocument 414 /errordocs/414.shtml
769 ErrorDocument 500 /errordocs/500.shtml
770 ErrorDocument 503 /errordocs/503.shtml
773 # Allow server status reports, with the URL of http://servername/server-status
774 # Change the ".your_domain.com" to match your domain to enable.
776 #<Location /server-status>
777 # SetHandler server-status
780 # Allow from .your_domain.com
784 # Allow remote server configuration reports, with the URL of
785 # http://servername/server-info (requires that mod_info.c be loaded).
786 # Change the ".your_domain.com" to match your domain to enable.
788 #<Location /server-info>
789 # SetHandler server-info
792 # Allow from .your_domain.com
796 # There have been reports of people trying to abuse an old bug from pre-1.1
797 # days. This bug involved a CGI script distributed as a part of Apache.
798 # By uncommenting these lines you can redirect these attacks to a logging
799 # script on phf.apache.org. Or, you can record them yourself, using the script
800 # support/phf_abuse_log.cgi.
802 #<Location /cgi-bin/phf*>
804 # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
807 ### Section 3: Virtual Hosts
809 # VirtualHost: If you want to maintain multiple domains/hostnames on your
810 # machine you can setup VirtualHost containers for them.
811 # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
812 # for further details before you try to setup virtual hosts.
813 # You may use the command line option '-S' to verify your virtual host
817 # If you want to use name-based virtual hosts you need to define at
818 # least one IP address (and port number) for them.
820 #NameVirtualHost 12.34.56.78:80
821 #NameVirtualHost 12.34.56.78
823 Include /etc/httpd/virtual-host.conf