1 2003-08-23 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
3 * geninitrd: - find proper max_kernel
5 2003-08-16 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
7 * geninitrd: - enable new raid_start available in latest busybox
9 2003-08-16 Micha³ Moskal <malekith@pld-linux.org>
12 - create /dev/null (busybox seems to need it) and /dev/zero (just in case)
14 * geninitrd: - set -x seems to cause SEGV
16 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
18 * geninitrd: - one more sbin->bin
21 - on 2.4 also load only module which is needed for mounting rootfs
23 2003-08-15 Micha³ Moskal <malekith@pld-linux.org>
25 * geninitrd: - use mdadm not initrd-mdadm for scanning
27 * geninitrd: - fix syntax
29 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
31 * geninitrd: - use mdadm.conf, too - then raidtab
33 * geninitrd: - initrd-busybox is in bin not sbin
35 2003-08-15 Micha³ Moskal <malekith@pld-linux.org>
37 * geninitrd: - first try
39 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
41 * geninitrd: - beginning of mdadm.conf support
43 2003-08-15 Micha³ Moskal <malekith@pld-linux.org>
45 * geninitrd: - marged busybox version
47 2003-08-15 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
50 - on 2.5/2.6 with sysfs we are able to fount exactly which module is required to get rootfs controller working
52 2003-08-13 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
54 * geninitrd: - fix ataraid support
56 2003-08-11 Arkadiusz Patyk <areq@pld-linux.org>
58 * geninitrd: - check if exist /proc/bus/pci/devices
60 2003-08-11 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
62 * geninitrd: - debug messages removed
64 2003-08-10 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
67 - same names caused variable covering and wrong results (fixed)
68 - don't try to load module unknown
69 - don't fail if modules not found (staticly compiled?)
72 - if no IDE module on disk then it's probably compiled into kernel so don't fail
73 - if PCI database not found then print warning
75 2003-08-10 Jan Rêkorajski <baggins@pld-linux.org>
77 * TODO: - we need ide=reverse support
80 - when comparing pci IDs make sure they will be compared as strings
82 * geninitrd: - DO NOT sort driver modules, are you nuts?
84 2003-08-09 Arkadiusz Patyk <areq@pld-linux.org>
86 * Attic/pci.ide: - move to pci-database
88 * geninitrd: - use PCI ids from pci-database
90 2003-08-09 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
92 * geninitrd: - find all PREIDEMODS
94 2003-08-08 Arkadiusz Patyk <areq@pld-linux.org>
97 - better check VERSION - don't need install rc-script, bsp in builder
99 2003-08-08 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
101 * geninitrd: - debug message removed
103 * Attic/pci.ide, geninitrd:
104 - support for automatic IDE module finding (needs testing)
106 2003-08-07 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
108 * geninitrd: - fix typo
110 * geninitrd: - added support for static mdadm
112 2003-07-17 Arkadiusz Mi¶kiewicz <arekm@pld-linux.org>
115 - there is insmod.static.modutils not insmod.static.modprobe
117 2003-06-30 Artur Frysiak <wiget@pld-linux.org>
119 * geninitrd: - use correct version of insmod.static
121 2003-04-09 Artur Frysiak <wiget@pld-linux.org>
123 * geninitrd, geninitrd.8.xml:
124 - added --with-insmod-static to allow using /sbin/insmod.static if bsp internal insmod/insmod_ng is bugi
125 - use DocBook XML 4.2 for man page
126 - describe --with-insmod-static and Linux 2.5.x support
127 - small "despamification"
129 2003-02-19 Artur Frysiak <wiget@pld-linux.org>
131 * geninitrd: - Linux 2.5.x support
133 * TODO: - and more things to do
135 * geninitrd.8.xml: - typo fixes
137 2002-11-27 Artur Frysiak <wiget@pld-linux.org>
139 * geninitrd: - typo in LVM code
141 2002-11-26 Artur Frysiak <wiget@pld-linux.org>
143 * geninitrd: - first version with LVM support but not yet fully tested
145 * lvm.todo: LVM implementation plan
147 2002-10-13 Witek Krêcicki <adasi@pld-linux.org>
149 * geninitrd: - fixed preload
151 2002-09-27 Artur Frysiak <wiget@pld-linux.org>
153 * geninitrd.8.xml: - one more contributor
156 - support for gzipped modules (patch by Witold Filipczyk <witekfl@poczta.onet.pl>)
157 - use findfs from e2fsprogs (>= 1.28) to find root device if specified by UUID or LABEL
159 2002-09-06 Artur Frysiak <wiget@pld-linux.org>
161 * geninitrd.8.xml: - not show almost empty hardware RAID desc
164 - added some notes about SCSI, ATA RAID and hardware RAID support
166 * geninitrd: New features:
169 - by default use raidstart (if needed)
170 - show raidstart related options in help message
171 - drop undocumented --use-raidstart switch
173 2002-03-25 Micha³ Moskal <malekith@pld-linux.org>
176 - fixed raidstart (should work with real-soon-now-to-be-released version of
178 - use bsp-raidless if not using raid
180 2002-03-13 Artur Frysiak <wiget@pld-linux.org>
182 * Makefile: better make dist
185 add geninitrd.8.xml to dist tarball and make geninitrd.8 from xml source
187 * Attic/geninitrd.8: this file are generated from xml source
189 * geninitrd.8.xml, Attic/geninitrd.8: typo
191 * geninitrd.8.xml: formating fixes
193 * geninitrd: UUID and LABEL support for ext3
194 fix displaying missing modules names
196 2002-03-07 Jakub Bogusz <qboosh@pld-linux.org>
198 * geninitrd: - fixed raidstart (if raidstart bsp builtin works)
200 2002-03-07 Artur Frysiak <wiget@pld-linux.org>
202 * geninitrd.8.xml: now is completed
204 2002-02-20 Artur Frysiak <wiget@pld-linux.org>
206 * geninitrd.sysconfig: FS->INITRDFS
208 2002-02-20 Jakub Bogusz <qboosh@pld-linux.org>
210 * geninitrd.sysconfig: - typo
212 2002-02-20 Artur Frysiak <wiget@pld-linux.org>
214 * geninitrd: don't generate modules.dep
216 2002-02-20 Micha³ Moskal <malekith@pld-linux.org>
218 * geninitrd: - run depmod, if modules.dep hasn't been found
220 2002-02-20 Artur Frysiak <wiget@pld-linux.org>
222 * geninitrd: - --fs is back, but if used warning is writen
224 2002-02-19 Artur Frysiak <wiget@pld-linux.org>
226 * Makefile: portability fix
228 * geninitrd.8.xml: - start rewrite documentation to XML Docbook.
230 * geninitrd: - drop trash support (trash is dead)
231 - rename --fs to --initrdfs (less confusion but incompatible change :( )
232 - new configuration option EXIT_IF_MISSING (is set to "no" then warn about missing modules but continue)
233 - disable root on loop device (need rewrite for bsp)
235 * TODO: total rewite plan
237 2002-01-29 Micha³ Moskal <malekith@pld-linux.org>
239 * geninitrd: - depmod support added
242 2002-01-17 Tomasz Pala <gotar@pld-linux.org>
244 * Attic/geninitrd.8, geninitrd: - cosmetics.
246 2001-12-15 Pawe³ Go³aszewski <blues@pld-linux.org>
252 2001-10-15 Artur Frysiak <wiget@pld-linux.org>
254 * geninitrd: fixed typo reported by GoTaR <gotar@priv0.onet.pl>
256 2001-09-10 Artur Frysiak <wiget@pld-linux.org>
258 * geninitrd: VERSION is *not* hardcoded
260 2001-09-07 kloczek <kloczek@pld-linux.org>
262 * Makefile: - rename release target to dist.
264 * geninitrd: - hardcode VERSION (as 2.6)
265 - move initialize variables on top and few indentation.
267 * geninitrd.sysconfig: - uncomment using bsp by default.
269 2001-09-07 Artur Frysiak <wiget@pld-linux.org>
274 * Makefile, geninitrd: Use RCS Id as version number
276 * geninitrd: release 2.5 ready
278 2001-09-07 Pawe³ Go³aszewski <blues@pld-linux.org>
280 * TODO, geninitrd.sysconfig:
281 - commented PREMODS added to sysconfig-file
284 2001-07-06 Artur Frysiak <wiget@pld-linux.org>
286 * TODO: one task done; one added
288 2001-07-04 kloczek <kloczek@pld-linux.org>
290 * TODO: Answer for quesion.
292 2001-07-04 Artur Frysiak <wiget@pld-linux.org>
294 * Makefile: version 2.4
296 * Attic/geninitrd.8: some options described
300 2001-07-03 Artur Frysiak <wiget@pld-linux.org>
302 * TODO: more tasks done
304 * Attic/geninitrd.8: - --omit-* options are removed
306 * TODO: some tasks done; new tasks added
308 2001-07-02 Micha³ Moskal <malekith@pld-linux.org>
312 2001-06-27 Artur Frysiak <wiget@pld-linux.org>
316 * TODO: UUID/LABEL support- done
318 2001-06-27 Bartosz Waszak <waszi@pld-linux.org>
320 * TODO: - add support to LVM
322 2001-06-27 Artur Frysiak <wiget@pld-linux.org>
324 * Attic/geninitrd.8: updated to geninitrd
326 2001-06-22 kloczek <kloczek@pld-linux.org>
329 - fix bug: generate proper modules list if in fstab is use UUID or LABEL in
332 * Makefile: - version 2.2.
334 2001-03-19 Micha³ Zawalich <michuz@pld-linux.org>
336 * Makefile: - version 2.1
337 - this version works fine with 2.4.x
339 2001-01-30 kloczek <kloczek@pld-linux.org>
341 * geninitrd.sysconfig:
342 - uncomment COMPRESS=yes, FS=rom, PROBESCSI=yes, PROBEIDE=yes, PROBERAID=yes
344 2001-01-17 Dariusz Karolczak <inglod@pld-linux.org>
348 2000-12-15 Micha³ Moskal <malekith@pld-linux.org>
350 * geninitrd.sysconfig: Updated to use bsp.
352 2000-12-06 kloczek <kloczek@pld-linux.org>
354 * Makefile: - version 1.2.
356 2000-11-30 Jan Rêkorajski <baggins@pld-linux.org>
358 * Makefile: - version 1.1
360 2000-11-22 Jacek Konieczny <jajcus@pld-linux.org>
364 2000-11-16 Dariusz Karolczak <inglod@pld-linux.org>
366 * TODO: *** empty log message ***
368 2000-11-14 Artur Frysiak <wiget@pld-linux.org>
370 * Attic/geninitrd.8: - added cramfs support (untested)
372 2000-11-09 Jacek Konieczny <jajcus@pld-linux.org>
374 * Attic/geninitrd.8, TODO, Makefile, geninitrd.sysconfig: New file.