3 # /etc/rc.d/rc.sysinit - run once at boot time
6 # Taken in part from Miquel van Smoorenburg's bcheckrc.
9 # reasonable start values for bootsplash progress.
15 if [ -r /etc/sysconfig/i18n ]; then
17 [ -n "$LANG" ] && export LANG || unset LANG
18 [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
19 [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE
20 [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES
21 [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC
22 [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY
23 [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME
24 [ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL
25 [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE
26 [ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
29 # Read network config data
30 if [ -r /etc/sysconfig/network ]; then
31 . /etc/sysconfig/network
40 . /etc/rc.d/init.d/functions
43 local _d selinuxfs _t _r
45 while read _d selinuxfs _t _r; do
46 [ "$_t" = "selinuxfs" ] && break
48 echo "*** Warning -- SELinux is active"
49 echo "*** Disabling security enforcement for system recovery."
50 echo "*** Run 'setenforce 1' to reenable."
51 echo "0" > $selinuxfs/enforce
55 local _d selinuxfs _t _r
57 while read _d selinuxfs _t _r; do
58 [ "$_t" = "selinuxfs" ] && break
61 *** Warning -- SELinux relabel is required. ***
62 *** Disabling security enforcement. ***
63 *** Relabeling could take a very long time, ***
64 *** depending on file system size. ***
66 echo "0" > $selinuxfs/enforce
67 /sbin/fixfiles -F relabel > /dev/null 2>&1
69 echo "*** Enabling security enforcement. ***"
70 echo $SELINUX > $selinuxfs/enforce
73 # Remove duplicate entries from mtab (for vserver guest use only)
74 clean_vserver_mtab() {
76 while read device mountpoint line; do
77 grep -qs "$mountpoint" /etc/mtab.clean || \
78 echo "$device $mountpoint $line" >> /etc/mtab.clean
80 cat /etc/mtab.clean > /etc/mtab
84 # Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
85 load_kernel_modules() {
98 # Loop over every line in modules file
100 grep -hvE '^(#|[[:blank:]]*$)' /etc/modules /etc/modules.$kernel /etc/modules.$kerneleq 2>/dev/null
101 echo '' # make sure there is a LF at the end
102 ) | while read module args; do
103 [ -z "$module" ] && continue
104 modprobe -s $module -- $args
108 # boot logging to /var/log/boot.msg. install showconsole package to get it.
109 if [ -x /sbin/blogd ] && ! is_no "$RC_BOOTLOG"; then
115 if ! is_yes "$VSERVER" ; then
116 # we need /proc mounted before everything
117 is_fsmounted proc /proc || mount -n -o gid=17 -t proc /proc /proc
119 # Only read this once.
120 cmdline=$(cat /proc/cmdline)
122 # sysfs is also needed before any other things (under kernel > 2.5)
123 if grep -q sysfs /proc/filesystems 2>/dev/null ; then
124 is_fsmounted sysfs /sys || mount -n -o gid=17 -t sysfs sysfs /sys
125 if [ "$(kernelver)" -ge "002006014" ] && \
126 grep -q securityfs /proc/filesystems 2>/dev/null ; then
127 mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
132 if grep -q selinuxfs /proc/filesystems 2>/dev/null && ! is_fsmounted selinuxfs /selinux; then
133 mount -n -o gid=17 -t selinuxfs selinuxfs /selinux
136 # PLD Linux LiveCD support
137 if [ -x /etc/rc.d/rc.live ]; then
141 # Choose Hardware profile
142 if [ -f /etc/sysconfig/hwprof ]; then
143 . /etc/sysconfig/hwprof
144 if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
145 mount -n / -o rw,remount
147 mount -n / -o ro,remount
151 # Disable splash when requested
152 [ -e /proc/splash ] && is_no "$BOOT_SPLASH" && echo "0" > /proc/splash
154 # Check SELinux status
155 selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null)
157 if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
158 if [ -r $selinuxfs/enforce ] ; then
159 SELINUX=$(cat $selinuxfs/enforce)
161 # assume enforcing if you can't read it
166 if [ -x /sbin/restorecon ] && is_fsmounted tmpfs /dev; then
167 /sbin/restorecon -R /dev 2>/dev/null
170 [ -z "${CONSOLETYPE}" ] && CONSOLETYPE="$(/sbin/consoletype)"
172 if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
178 # Print welcome message
179 nls "\t\t\t%sPowered by %sPLD Linux Distribution%s" "$(termput setaf $CPOWEREDBY)" "$(termput setaf $CPLD)" "$(termput op)"
180 if ! is_no "$RC_PROMPT"; then
181 nls -n "\t\t Press %sI%s to enter interactive startup" "$(termput setaf $CI)" "$(termput op)"
186 if [ -z "${HOSTNAME}" ]; then
187 show "$(nls 'Host:') $(hostname)" ; ok
189 run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
192 # Set the NIS domain name
193 if [ -n "$NISDOMAIN" ]; then
194 run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN
199 if ! is_yes "$VSERVER"; then
200 # Set console loglevel
201 if [ -n "$CONSOLE_LOGLEVEL" ]; then
202 /bin/dmesg -n $CONSOLE_LOGLEVEL
205 if ! is_no "$START_UDEV"; then
206 if [ -x /sbin/start_udev ]; then
208 elif [ -x /lib/firmware/firmware-loader.sh ]; then
209 /sbin/sysctl -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh
213 # Unmount the initrd, if necessary
214 if grep -q /initrd /proc/mounts 2>/dev/null && ! grep -q /initrd/loopfs /proc/mounts 2>/dev/null; then
215 umount /initrd/dev 2>/dev/null
217 /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
220 # Start logging console output since we have all /dev stuff setup
221 if [ "$RC_BOOTLOG" ]; then
225 # cpuset support (mounted unconditionally, shouldn't be a problem)
226 if grep -q cgroup /proc/filesystems 2>/dev/null ; then
227 mount -n -t cgroup none /dev/cpuset -o cpuset,noprefix
228 [ $? -eq 0 ] && echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
229 elif grep -q cpuset /proc/filesystems 2>/dev/null ; then
230 mount -n -t cpuset none /dev/cpuset
233 # Configure Linux kernel (initial configuration, some required modules still
235 /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
237 # Set the system clock.
242 if [ -f /etc/sysconfig/clock ]; then
243 . /etc/sysconfig/clock
245 # convert old style clock config to new values
246 if [ "${CLOCKMODE}" = "GMT" ]; then
248 elif [ "${CLOCKMODE}" = "ARC" ]; then
253 if grep "system serial" /proc/cpuinfo 2>/dev/null | grep -q MILO 2>/dev/null ; then
258 CLOCKFLAGS="--hctosys"
260 if is_yes "$UTC" ; then
261 CLOCKFLAGS="$CLOCKFLAGS --utc"
262 CLOCKDEF="$CLOCKDEF (utc)"
264 CLOCKFLAGS="$CLOCKFLAGS --localtime"
265 CLOCKDEF="$CLOCKDEF (local)"
268 if is_yes "$ARC" ; then
269 CLOCKFLAGS="$CLOCKFLAGS -A"
270 CLOCKDEF="$CLOCKDEF (arc)"
273 if is_yes "$SRM" ; then
274 CLOCKFLAGS="$CLOCKFLAGS -S"
275 CLOCKDEF="$CLOCKDEF (srm)"
278 # Check if timezone definition is available
279 if [ -e /etc/localtime ] ; then
280 if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
281 show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
284 TIME_SETUP_DELAYED=yes
287 if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
288 # XXX might need modules dep
289 # Device mapper & related initialization
290 if ! grep -qF device-mapper /proc/devices; then
294 # but should do this before swapon?
295 . /etc/rc.d/init.d/cryptsetup
296 show "Starting disk encryption"
297 init_crypto 0 && ok || fail
301 run_cmd "Activating swap partitions" swapon -a -e
303 # Initialize USB controllers
305 if ! strstr "$cmdline" "nousb" && ! is_fsmounted usbfs /proc/bus/usb ; then
306 aliases=$(/sbin/modprobe -c | awk '/^alias[\t ]+usb-controller/ { print $3 }')
307 if [ -n "$aliases" -a "$aliases" != "off" ] ; then
308 /sbin/modprobe -s -k usbcore
309 for alias in $aliases ; do
310 [ "$alias" = "off" ] && continue
311 run_cmd "$(nls 'Initializing USB controller') ($alias)" /sbin/modprobe -s $alias
313 [ $? -eq 0 -a -n "$aliases" ] && usb=1
315 if grep -iq "usb" /proc/devices 2>/dev/null ; then
320 if [ "$usb" = "1" ] && ! is_fsmounted usbfs /proc/bus/usb ; then
321 run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
325 if [ "$usb" = "1" ]; then
326 needusbstorage=$(LC_ALL=C cat /proc/bus/usb/devices 2>/dev/null|grep -e "^I.*Cls=08" 2>/dev/null)
327 if [ "$(kernelverser)" -lt "002006" ]; then
328 LC_ALL=C grep -q 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe hid 2> /dev/null
329 mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null)
330 kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null)
331 if [ -n "$kbdoutput" ]; then
332 run_cmd "Initializing USB keyboard" modprobe keybdev
334 if [ -n "$mouseoutput" ]; then
335 run_cmd "Initializing USB mouse" modprobe mousedev
340 # Setup hdparm thing (if exists and is needed)
341 if ! strstr "$cmdline" nohdparm; then
342 [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
345 if [ -f /fastboot ] || strstr "$cmdline" "fastboot"; then
351 if [ -f /fsckoptions ]; then
352 fsckoptions=$(cat /fsckoptions)
357 if [ -f /forcefsck ]; then
358 fsckoptions="-f $fsckoptions"
360 # Obey the fs_passno setting for / (see fstab(5))
362 # - make sure we have at least 6 fields
363 _ROOTFS_PASSNO=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $6}' /etc/fstab)
367 _ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
368 _ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
370 if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ]; then
371 show "Checking root filesystem"; started
372 initlog -c "fsck -C -T -a $fsckoptions /"
376 # A return of 4 or higher means there were serious problems.
377 if [ $rc -gt 3 ]; then
378 [ -e /proc/splash ] && echo "verbose" > /proc/splash
379 # don't use '\n' in nls macro !
382 nls "*** An error occurred during the file system check."
383 nls "*** Dropping you to a shell; the system will reboot"
384 nls "*** when you leave the shell."
387 PS1="`nls '(Repair filesystem)# '`"; export PS1
388 [ "$SELINUX" = "1" ] && disable_selinux
389 if ! is_no "$RUN_SULOGIN_ON_ERR"; then
395 run_cmd "Unmounting file systems" umount -a
396 mount -n -o remount,ro /
397 run_cmd "Automatic reboot in progress" reboot
398 # A return of 2 or 3 means that filesystem was repaired but we need
400 elif [ "$rc" = "2" -o "$rc" = "3" ]; then
401 [ -e /proc/splash ] && echo "verbose" > /proc/splash
403 nls "*** Filesystem was repaired but system needs to be"
404 nls "*** rebooted before mounting it."
405 nls "*** REBOOTING ***"
408 run_cmd "Unmounting file systems" umount -a
409 mount -n -o remount,ro /
410 run_cmd "Automatic reboot in progress" reboot
411 elif [ "$rc" = "1" ]; then
416 # Check for arguments
417 if strstr "$cmdline" nopnp; then
423 # set up pnp and kernel pnp
424 if [ -n "$PNP" ]; then
425 if ! is_no "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
426 run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
428 if ! is_no "$RUN_KERNELPNP"; then
429 /sbin/modprobe -k isa-pnp 2> /dev/null
430 if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
431 show "Setting up ISA PNP devices (kernelspace pnp)"; busy
432 grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail)
437 _ROOTFS_RO=$(awk '($1 !~ /^#/ && $2 == "/" && ($4 == "ro" || $4 ~ /,ro$/ || $4 ~ /^ro,/ || $4 ~ /,ro,/ ) && NF >= 6) { print "ro" }' /etc/fstab)
438 # Remount the root filesystem read-write
439 if [ -z "$_ROOTFS_RO" ]; then
440 run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
443 # Update quotas if fsck was run on /
444 if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
445 run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vnug /
448 # Clean up SELinux labels
449 if [ -n "$SELINUX" ]; then
450 for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache ; do
451 [ -r $file ] && restorecon $file >/dev/null 2>&1
455 if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
456 # XXX, this must be probably done after random is initialized from /var/run/random-seed
457 show "Starting disk encryption using the RNG"
458 init_crypto 1 && ok || fail
461 # Start logging console output since we have all /dev stuff setup
462 if [ "$RC_BOOTLOG" ]; then
467 # Remove stale backups
468 rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~ >/dev/null 2>&1
470 # Remove /etc/nologin when starting system
471 [ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
473 if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
474 show "Enabling Delay Login"; busy
476 nls "System bootup in progress - please wait" >> /etc/nologin
478 chmod 644 /etc/nologin
479 cp -fp /etc/nologin /etc/nologin.boot
483 # The root filesystem is now read-write, so we can now log via
484 # syslog() directly...
485 if [ -n "$IN_INITLOG" ]; then
489 if ! is_yes "$VSERVER"; then
492 [ -f /etc/cryptomtab ] && :>/etc/cryptomtab
494 # Enter root, /proc, /sys and other into mtab.
497 if is_fsmounted usbfs /proc/bus/usb; then
498 mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
501 if is_fsmounted sysfs /sys; then
502 mount -f -t sysfs sysfs /sys
503 if is_fsmounted securityfs /sys/kernel/security ; then
504 mount -f -t securityfs securityfs /sys/kernel/security
508 if is_fsmounted selinuxfs /selinux; then
509 mount -f -t selinuxfs selinuxfs /selinux
512 if is_fsmounted cgroup /dev/cpuset; then
513 mount -f -t cgroup -o cpuset,noprefix none /dev/cpuset
514 elif is_fsmounted cpuset /dev/cpuset; then
515 mount -f -t cpuset none /dev/cpuset
518 if [ ! -f /proc/modules ]; then
520 elif ! strstr "$cmdline" nomodules; then
527 # Adjust symlinks as necessary in /boot to keep system services from
528 # spewing messages about mismatched System maps and so on.
529 if ! is_no "$SET_SLINKS"; then
530 if [ -L /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
531 ln -s -f System.map-$uname_r /boot/System.map
533 if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
534 ln -s -f System.map-$uname_r /boot/System.map
538 # Run depmod if RUN_DEPMOD != "no" and:
539 # a) user requested or RUN_DEPMOD="";
540 # b) modules.dep is missing
541 if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
542 if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ]; then
543 run_cmd "Finding module dependencies" depmod -a
544 elif [ "$RUN_DEPMOD" = "ifmissing" ] && [ ! -f /lib/modules/$uname_r/modules.dep ]; then
545 run_cmd "Finding module dependencies" depmod -A
550 if [ -f /proc/sys/kernel/modprobe ]; then
551 if [ -n "$USEMODULES" ]; then
552 sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
554 # We used to set this to NULL, but that causes
555 # 'failed to exec' messages"
556 sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
560 # Load usb storage here, to match most other things
561 if [ -n "$needusbstorage" ]; then
562 modprobe -k usb-storage >/dev/null 2>&1
565 # Load firewire devices
566 if ! strstr "$cmdline" nofirewire; then
567 aliases=$(/sbin/modprobe -c | awk '/^alias ieee1394-controller/ { print $3 }')
568 if [ -n "$aliases" -a "$aliases" != "off" ] ; then
569 for alias in $aliases ; do
570 [ "$alias" = "off" ] && continue
571 run_cmd "$(nls 'Initializing firewire controller') ($alias)" /sbin/modprobe $alias
573 LC_ALL=C grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && /sbin/modprobe -s sbp2 > /dev/null 2>&1
577 # Load sound modules if they need persistent DMA buffers
578 if [ $(kernelverser) = "002006" ]; then
579 MODULES_CONF=/etc/modprobe.conf
580 elif [ -r /etc/modules.conf ]; then
581 MODULES_CONF=/etc/modules.conf
583 MODULES_CONF=/etc/conf.modules
586 if grep -q "^options sound dmabuf=1" "$MODULES_CONF" 2>/dev/null ; then
588 alias=$(/sbin/modprobe -c | grep -sE "^alias[[:space:]]+sound[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
589 if [ -n "$alias" -a "$alias" != "off" ] ; then
590 run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
593 alias=$(/sbin/modprobe -c | grep -sE "^alias[[:space:]]+sound-slot-0[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
594 if [ -n "$alias" -a "$alias" != "off" ] ; then
595 run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
603 if [ -x /sbin/multipath ]; then
604 # first make nodes that were discarded due (possible) new /dev mount
606 /sbin/dmsetup mknodes
607 modprobe -s dm-multipath
608 run_cmd "Activating dm-multipath" /sbin/multipath -v 0
609 /sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p'
612 if [ -x /sbin/dmraid ]; then
613 run_cmd "Activating ATARAID devices" /sbin/dmraid -ay
616 # Find and activate volume groups:
618 if [ -x /sbin/evms_activate ]; then
619 if [ "$(kernelverser)" -lt "002006" ]; then
620 # Linux 2.4 core modules
621 modprobe -s -k evms > /dev/null 2>&1
622 modprobe -s -k evms_passthru > /dev/null 2>&1
623 modprobe -s -k ldev_mgr > /dev/null 2>&1
624 modprobe -s -k dos_part > /dev/null 2>&1
626 # Linux 2.6 core module
627 modprobe -s -k evmscore > /dev/null 2>&1
630 is_yes "$EVMS_GUID_PTABLE" && modprobe -s -k gpt_part >/dev/null 2>&1
631 is_yes "$EVMS_LVM" && modprobe -s -k lvm_vge >/dev/null 2>&1
632 is_yes "$EVMS_AIX" && modprobe -s -k AIXlvm_vge >/dev/null 2>&1
633 is_yes "$EVMS_OS2" && modprobe -s -k os2lvm_vge >/dev/null 2>&1
634 run_cmd "Discovering EVMS volumes" /sbin/evms_activate
635 if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then
636 # Link nodes for compatibility with LVM
637 if [ "$(echo /dev/evms/lvm/*)" != '/dev/evms/lvm/*' ] ; then
638 ln -s /dev/evms/lvm/* /dev
643 # LVM (keep in sync with LVM starting after RAID run!)
644 if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
645 lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
646 if [ "$lvmversion" = "1" ] ; then
647 modprobe -s -k lvm-mod >/dev/null 2>&1
649 elif [ "$lvmversion" = "2" ] ; then
650 modprobe -s -k dm-mod >/dev/null 2>&1
651 lvmignorelock="--ignorelockingfailure"
653 modprobe -s -k lvm-mod >/dev/null 2>&1
654 # device mapper (2.5+ and patched 2.4)
655 modprobe -s -k dm-mod >/dev/null 2>&1
659 run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelock
660 run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmignorelock
661 if [ "$lvmversion" = "2" ]; then
663 # display VG statistics
669 if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ] || [ -f /etc/raidtab ]; then
670 modprobe -s md >/dev/null 2>&1
671 if [ -f /proc/mdstat ]; then
675 if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ]; then
676 if (grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null); then
677 run_cmd "Starting up RAID devices" /sbin/mdadm --assemble --scan --auto=yes
679 [ "$rc" -eq 0 ] && goraidtab=0 && golvm=1
683 if [ -f /etc/raidtab -a "$goraidtab" -eq 1 ]; then
684 for i in $(awk '!/^#/ && /raiddev/{print $2}' /etc/raidtab 2>/dev/null); do
686 RAIDDEV=$(basename $i)
687 RAIDSTAT=$(grep "^$RAIDDEV : active" /proc/mdstat 2>/dev/null)
688 show "Starting up RAID device %s" $RAIDDEV
690 if [ -z "$RAIDSTAT" ]; then
691 # Try raidstart first...if that fails then
692 # fall back to raid0run and if that fails too
693 # fall back to raidadd, raidrun.
695 if [ -x /sbin/raidstart ]; then
699 if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then
703 if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then
708 if [ $RESULT -gt 0 ]; then
720 # A non-zero return means there were problems
721 if [ $rc -gt 0 ]; then
722 [ -e /proc/splash ] && echo "verbose" > /proc/splash
723 show "Starting up RAID devices"; fail
726 nls "*** An error occurred during the RAID startup."
727 nls "*** Dropping you to a shell; the system will reboot"
728 nls "*** when you leave the shell."
731 PS1="$(nls '(RAID Repair)# ')"; export PS1
732 [ "$SELINUX" = "1" ] && disable_selinux
733 if ! is_no "$RUN_SULOGIN_ON_ERR"; then
739 run_cmd "Unmounting file systems" umount -a
740 run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
741 run_cmd "Automatic reboot in progress" reboot
743 # LVM on RAID (keep in sync with LVM setting few lines above)
744 if [ "$golvm" -eq "1" ]; then
745 if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
746 run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelock
747 run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmignorelock
748 [ "$lvmversion" = "2" ] && /sbin/vgmknodes
751 show "Starting up RAID devices"; ok
757 if [ -z "$fastboot" ] && ! strstr "$cmdline" nofsck; then
758 rc_splash "fsck start"
759 show "Checking filesystems"; started
760 initlog -c "fsck -C -T -R -A -a -P $fsckoptions"
764 # A return of 2 or higher means there were serious problems
765 if [ $rc -gt 1 ]; then
766 [ -e /proc/splash ] && echo "verbose" > /proc/splash
769 nls "*** An error occurred during the file system check."
770 nls "*** Dropping you to a shell; the system will reboot"
771 nls "*** when you leave the shell."
774 PS1="$(nls '(Repair filesystem)# ')"; export PS1
775 [ "$SELINUX" = "1" ] && disable_selinux
776 if ! is_no "$RUN_SULOGIN_ON_ERR"; then
782 run_cmd "Unmounting file systems" umount -a
783 run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
784 run_cmd "Automatic reboot in progress" reboot
785 elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
788 rc_splash "fsck stop"
791 # Mount all other filesystems (except for NFS and /proc, which is already
792 # mounted). Contrary to standard usage,
793 # filesystems are NOT unmounted in single user mode.
795 run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev
797 # now we have /usr mounted, recheck if we have gettext and tput available.
798 if is_no "$TPUT"; then
804 # Now do some workaround - encrypted filesystems couldn't have been fsck-ed
805 # before mount - that's where the password is entered.
806 # mount is buggy - when remounting loopback filesystem, loop=XXX
807 # option is removed from /etc/mtab
808 if [ -z "$fastboot" ] && grep "^[^#].*encryption=" /etc/fstab 2>/dev/null | grep -v -q "noauto" 2>/dev/null; then
809 show "Checking encrypted filesystems"; started
810 LOOPLIST="$(LC_ALL=C awk '
811 FILENAME=="/proc/mounts" {
814 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && /[^a-zA-Z_]ro[^a-zA-Z_]/ {
815 if ($2 in TAB){print TAB[$2];}
817 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
818 if ($2 in TAB){print TAB[$2];}
819 sub("loop(=[^,]*)?","loop=" TAB[$2] ",ro",$4);
820 cmd="mount " $2 " -o remount," $4;
823 ' /proc/mounts /etc/fstab)"
824 initlog -c "fsck -T -C -a $fsckoptions $LOOPLIST"
827 # A return of 2 or higher means there were serious problems.
828 if [ $rc -gt 1 ]; then
829 [ -e /proc/splash ] && echo "verbose" > /proc/splash
832 nls "*** An error occurred during the file system check."
833 nls "*** Dropping you to a shell; the system will reboot"
834 nls "*** when you leave the shell."
837 PS1="$(nls '(Repair filesystem)# ')"; export PS1
838 [ "$SELINUX" = "1" ] && disable_selinux
839 if ! is_no "$RUN_SULOGIN_ON_ERR"; then
845 run_cmd "Unmounting file systems" umount -a
846 run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
847 run_cmd "Automatic reboot in progress" reboot
848 elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
852 show "Remounting encrypted filesystems back in rw mode"; busy
854 FILENAME=="/proc/mounts" {
857 FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ {
858 sub("loop(=[^,]*)?","loop=" TAB[$2] ",rw",$4);
859 cmd="mount " $2 " -o remount," $4;
862 ' /proc/mounts /etc/fstab
866 # /var/log should be writable now, so start saving the boot output
867 if [ "$RC_BOOTLOG" ]; then
868 echo > /var/log/boot.msg
872 if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
873 run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa
877 if [ -x /sbin/quotaon ]; then
878 run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
881 # Turn on process accounting
882 if [ -x /etc/rc.d/rc.acct ]; then
883 /etc/rc.d/rc.acct start
886 # Set the clock if timezone definition wasn't available (eg. /usr not mounted)
887 if is_yes "$TIME_SETUP_DELAYED"; then
888 if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
889 show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
893 # Initialize the serial ports
894 if [ -f /etc/rc.d/rc.serial ]; then
895 . /etc/rc.d/rc.serial
898 if [ -f /proc/sys/kernel/panic -a -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" ]; then
899 show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
900 if (sysctl -w kernel.panic=$PANIC_REBOOT_TIME >/dev/null 2>&1); then ok; else fail; fi
903 # ... and here finish configuring parameters
904 /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
906 # /var/log should be writable now, so start saving the boot output
907 if [ "$RC_BOOTLOG" ]; then
908 echo > /var/log/boot.msg
916 [ -n "$SELINUX" ] && [ -f /.autorelabel ] && relabel_selinux
919 rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff >/dev/null 2>&1
922 # /usr could be still not mounted if it is on NFS.
923 for afile in /var/lock/* /var/run/*; do
925 if [ -d "$afile" ]; then
930 echo $afile/* | xargs rm -rf
934 [ "$bafile" != "hwprofile" ] && rm -f $afile 2> /dev/null
939 rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \
940 /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
941 rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
942 /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
943 /tmp/scrollkeeper-* /tmp/ssh-*
947 if ! is_no "$NEED_XFILES"; then
950 chown root:utmp /var/run/utmpx /var/log/wtmpx
951 chmod 0664 /var/run/utmpx /var/log/wtmpx
955 chown root:utmp /var/run/utmp /var/log/wtmp
956 chmod 0664 /var/run/utmp /var/log/wtmp
960 if is_yes "$CLEAN_TMP"; then
961 # XXX LC_ALL needed here
962 rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
965 # System protected dirs
966 mkdir -m 1777 -p /tmp/.ICE-unix > /dev/null 2>&1
967 chown root:root /tmp/.ICE-unix
968 [ -n "$SELINUX" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
970 if ! is_yes "$VSERVER"; then
971 run_cmd "Enabling swap space" /bin/true
972 # Right, now turn on swap in case we swap to files
973 swapon -a >/dev/null 2>&1
975 # If a SCSI tape has been detected, load the st module unconditionally
976 # since many SCSI tapes don't deal well with st being loaded and unloaded
977 if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
978 if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
979 if [ -n "$USEMODULES" ] ; then
980 # Try to load the module. If it fails, ignore it...
981 insmod -p st >/dev/null 2>&1 && modprobe -s st >/dev/null 2>&1
986 # Now that we have all of our basic modules loaded and the kernel going,
987 # let's dump the syslog ring somewhere so we can find it later
988 dmesg > /var/log/dmesg
990 while [ $i -ge 0 ]; do
991 if [ -f /var/log/dmesg.$i ]; then
992 chmod 0600 /var/log/dmesg.$i
993 mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1))
997 cp -f /var/log/dmesg /var/log/dmesg.0
998 chmod 0600 /var/log/dmesg /var/log/dmesg.0
1001 kill -TERM $(/sbin/pidof getkey) >/dev/null 2>&1
1004 # extra check if the background process we just spawned is still running,
1005 # as in case of vserver bootup it finishes quite instantly.
1006 if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
1007 /sbin/getkey -c 5 i && touch /var/run/confirm