+issue
+rpm-base
+vserver-packages
---- util-vserver-0.30.214.org/distrib/pld-ac/poldek/aliases.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ac/poldek/aliases.conf 2007-11-15 23:20:48.181172125 +0100
-@@ -0,0 +1,30 @@
-+# System wide aliases
-+# ls
-+ll = ls -l
-+llu = ls -lu
-+llU = ls -lU
-+lli = ls -lI
-+
-+# install
-+freshen = install -FN
-+upgrade = install -F
-+
-+# for backward compatybility, greedy is on by default now
-+greedy-upgrade = install -FG
-+
-+just-install = install -IN
-+
-+# search
-+what-requires = search -r
-+what-provides = search -p
-+rsearch = search --perlre
-+
-+exit = quit
-+
-+# for fun
-+#ls = uninstall kernel
-+
-+less = !less
-+grep = !grep
-+awk = !awk
-+
---- util-vserver-0.30.214.org/distrib/pld-ac/poldek/fetch.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ac/poldek/fetch.conf 2007-11-15 23:20:48.181172125 +0100
-@@ -0,0 +1,62 @@
-+# Configuration of poldek external file getters. Each [fetcher] section
-+# declares one external downloader. The syntax is:
-+# [fetcher]
-+# name = NAME
-+# proto = PROTOCOL[ ,PROTOCOL... ]
-+# cmd = CMD [OPTION...] DESTINATION-MACRO URL-MACRO
-+# Possible parameters are:
-+#
-+#[fetcher]
-+# Unique name of the fetcher. This is an optional parameter, if not set then
-+# name is taken from the "cmd" parameter value as "$(basename $cmd)".
-+#name = foo
-+
-+# Protocol or protocols supported by fetcher. Name of the protocol can be
-+# completely arbitrary, i.e. if you can handle protocol "foo" by writing
-+# a script which takes URLs in form 'foo://'.
-+#proto = foo,bar
-+
-+# Parameter specifies an external command and its invoking syntax.
-+# The syntax of "cmd" is:
-+# cmd = COMMAND [ OPTION... ] {%d,%D} {%p,%P}[n]
-+# Where COMMAND is the name or full path of command, OPTION is command specific
-+# options. Macro '%d' is replaced with cache directory, '%D' is replaced with
-+# 'cache directory/file basename', and '%p' with file basename, %P with file full
-+# path (URL). Optional suffix 'n' with %p and %P means that command can be
-+# invoked with multiple files at once.
-+#cmd = foogetter.sh -N %D %Pn
-+
-+##Configured fetchers
-+[fetcher]
-+proto = cdrom
-+cmd = vfjuggle %d %Pn
-+
-+[fetcher]
-+proto = http,ftp,https
-+cmd = wget -N --dot-style=binary -P %d %Pn
-+
-+[fetcher]
-+proto = http,ftp
-+cmd = snarf %P %D
-+
-+[fetcher]
-+proto = https
-+cmd = curl %P -o %D
-+
-+[fetcher]
-+proto = rsync
-+cmd = rsync -v %P %d
-+
-+[fetcher]
-+proto = smb
-+cmd = vfsmb -v %P %d
-+
-+#[fetcher]
-+#proto = ssh
-+#cmd = vfssh.sh %d %Pn
-+
-+#[fetcher]
-+#proto = foo
-+#cmd = foo.sh %d %Pn
-+
-+
--- util-vserver-0.30.214.org/distrib/pld-ac/poldek/pld-source.conf 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-ac/poldek/pld-source.conf 2007-11-15 23:20:48.181172125 +0100
@@ -0,0 +1,44 @@
+
+# Taking into account package Conflicts.
+#conflicts = yes
---- util-vserver-0.30.214.org/distrib/pld-ac/poldek/source.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ac/poldek/source.conf 2007-11-15 23:20:48.181172125 +0100
-@@ -0,0 +1,85 @@
-+# Sample poldek sources configuration
-+# Every source is configured in his own [source] section.
-+# Possible parameters are:
-+#
-+#[source]
-+# Unique name of the repository.
-+#name = foo
-+
-+# Type of repository index. Permitted values are 'pndir', 'pdir', 'apt', 'yum'
-+# and 'dir' as listed by --stl switch.
-+#type = pndir
-+
-+# This parameter sets index original type i.e type of repository
-+# from what this repository is created. Default is 'dir' - means
-+# that directory of packages is scanned.
-+#original type = dir
-+
-+# Unique name of the repository. May be either path or URL.
-+#path = /some/url/or/dir
-+
-+# If package index and packages are stored in different locations then
-+# prefix stands for packages path.
-+#prefix = /some/url/or/dir
-+
-+# Controls visibility of multiple package instances with different EVR.
-+# If on, only one, highest version will be visible.
-+#douniq = no
-+
-+# Repository priority. If the same packages (equal names and EVR)
-+# are available in more than one source then package from highest
-+# prioritized source are taken. Priority is numeric value. Lower number
-+# means higher priority, and negative priorities are allowed.
-+# Priority is numeric value.
-+#pri = 0
-+
-+# Controling if repository index will be implicit loaded. Set it off if
-+# the index should be loaded on demand only, i.e. if specified directly
-+# by --sn option.
-+#auto = yes
-+
-+# Controls if repository index will be implicit updated. Set it off if
-+# the index should be updated on demand only, i.e. if specified directly
-+# by --sn option.
-+#autoup = yes
-+
-+# Packages PGP/GPG signatures (if any) will be verified before their
-+# installation.
-+#signed = no
-+
-+# Have the same meaning as [global] parameter. Example:
-+# hold = kernel* dev
-+#hold =
-+
-+# Have the same meaning as [global] parameter. Example:
-+# ignore = kernel*smp* dev
-+#ignore =
-+
-+# Parameter have the same meaning as [global] parameter.
-+# exclude path = usr/share/doc:usr/share/man:usr/src
-+#exclude path =
-+
-+# Preferred language of package descriptions. If not set, taken from locale
-+# settings. Example:
-+# lang = pl_PL:lt_LT
-+#lang =
-+
-+[source]
-+name = home
-+type = dir
-+path = $HOME/rpm/RPMS
-+auto = no
-+autoup = no
-+
-+#[source]
-+#type = pndir
-+#name = foo
-+#path = ftp://ftp.foo.bar.org/RPMS/
-+#pri = -10
-+#auto = no
-+#autoup = no
-+#signed = yes
-+#hold = kernel*
-+#ignore = kernel*-smp-*
-+#dscr = pl_PL
-+
--- util-vserver-0.30.214.org/distrib/pld-ac/rpm/macros 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-ac/rpm/macros 2007-11-15 23:20:48.181172125 +0100
@@ -0,0 +1,4 @@
+# you have to use at least one language beside 'C'
+%_install_langs C:en:pl
+%_netsharedpath /dev
---- util-vserver-0.30.214.org/distrib/pld-ac/rpmlist.d/00.lst 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ac/rpmlist.d/00.lst 2007-11-15 23:20:48.181172125 +0100
-@@ -0,0 +1,10 @@
-+basesystem-*.rpm
-+dev-*.rpm
-+FHS-*.rpm
-+glibc-misc-*.rpm
-+glibc-[0-9]*.rpm
-+libgcc-[0-9]*.rpm
-+setup-*.rpm
-+issue-[0-9]*.rpm
-+rpm-base-*.rpm
-+vserver-packages-*.rpm
--- util-vserver-0.30.214.org/distrib/pld-th/pkgs/01 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-th/pkgs/01 2007-11-15 23:20:48.181172125 +0100
@@ -0,0 +1,5 @@
+issue
+rpm-base
+vserver-packages
---- util-vserver-0.30.214.org/distrib/pld-th/poldek/aliases.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-th/poldek/aliases.conf 2007-11-15 23:20:48.181172125 +0100
-@@ -0,0 +1,30 @@
-+# System wide aliases
-+# ls
-+ll = ls -l
-+llu = ls -lu
-+llU = ls -lU
-+lli = ls -lI
-+
-+# install
-+freshen = install -FN
-+upgrade = install -F
-+
-+# for backward compatybility, greedy is on by default now
-+greedy-upgrade = install -FG
-+
-+just-install = install -IN
-+
-+# search
-+what-requires = search -r
-+what-provides = search -p
-+rsearch = search --perlre
-+
-+exit = quit
-+
-+# for fun
-+#ls = uninstall kernel
-+
-+less = !less
-+grep = !grep
-+awk = !awk
-+
---- util-vserver-0.30.214.org/distrib/pld-th/poldek/fetch.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-th/poldek/fetch.conf 2007-11-15 23:20:48.181172125 +0100
-@@ -0,0 +1,62 @@
-+# Configuration of poldek external file getters. Each [fetcher] section
-+# declares one external downloader. The syntax is:
-+# [fetcher]
-+# name = NAME
-+# proto = PROTOCOL[ ,PROTOCOL... ]
-+# cmd = CMD [OPTION...] DESTINATION-MACRO URL-MACRO
-+# Possible parameters are:
-+#
-+#[fetcher]
-+# Unique name of the fetcher. This is an optional parameter, if not set then
-+# name is taken from the "cmd" parameter value as "$(basename $cmd)".
-+#name = foo
-+
-+# Protocol or protocols supported by fetcher. Name of the protocol can be
-+# completely arbitrary, i.e. if you can handle protocol "foo" by writing
-+# a script which takes URLs in form 'foo://'.
-+#proto = foo,bar
-+
-+# Parameter specifies an external command and its invoking syntax.
-+# The syntax of "cmd" is:
-+# cmd = COMMAND [ OPTION... ] {%d,%D} {%p,%P}[n]
-+# Where COMMAND is the name or full path of command, OPTION is command specific
-+# options. Macro '%d' is replaced with cache directory, '%D' is replaced with
-+# 'cache directory/file basename', and '%p' with file basename, %P with file full
-+# path (URL). Optional suffix 'n' with %p and %P means that command can be
-+# invoked with multiple files at once.
-+#cmd = foogetter.sh -N %D %Pn
-+
-+##Configured fetchers
-+[fetcher]
-+proto = cdrom
-+cmd = vfjuggle %d %Pn
-+
-+[fetcher]
-+proto = http,ftp,https
-+cmd = wget -N --dot-style=binary -P %d %Pn
-+
-+[fetcher]
-+proto = http,ftp
-+cmd = snarf %P %D
-+
-+[fetcher]
-+proto = https
-+cmd = curl %P -o %D
-+
-+[fetcher]
-+proto = rsync
-+cmd = rsync -v %P %d
-+
-+[fetcher]
-+proto = smb
-+cmd = vfsmb -v %P %d
-+
-+#[fetcher]
-+#proto = ssh
-+#cmd = vfssh.sh %d %Pn
-+
-+#[fetcher]
-+#proto = foo
-+#cmd = foo.sh %d %Pn
-+
-+
--- util-vserver-0.30.214.org/distrib/pld-th/poldek/pld-source.conf 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-th/poldek/pld-source.conf 2007-11-15 23:20:48.181172125 +0100
@@ -0,0 +1,51 @@
+
+# Taking into account package Conflicts.
+#conflicts = yes
---- util-vserver-0.30.214.org/distrib/pld-th/poldek/source.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-th/poldek/source.conf 2007-11-15 23:20:48.184505622 +0100
-@@ -0,0 +1,85 @@
-+# Sample poldek sources configuration
-+# Every source is configured in his own [source] section.
-+# Possible parameters are:
-+#
-+#[source]
-+# Unique name of the repository.
-+#name = foo
-+
-+# Type of repository index. Permitted values are 'pndir', 'pdir', 'apt', 'yum'
-+# and 'dir' as listed by --stl switch.
-+#type = pndir
-+
-+# This parameter sets index original type i.e type of repository
-+# from what this repository is created. Default is 'dir' - means
-+# that directory of packages is scanned.
-+#original type = dir
-+
-+# Unique name of the repository. May be either path or URL.
-+#path = /some/url/or/dir
-+
-+# If package index and packages are stored in different locations then
-+# prefix stands for packages path.
-+#prefix = /some/url/or/dir
-+
-+# Controls visibility of multiple package instances with different EVR.
-+# If on, only one, highest version will be visible.
-+#douniq = no
-+
-+# Repository priority. If the same packages (equal names and EVR)
-+# are available in more than one source then package from highest
-+# prioritized source are taken. Priority is numeric value. Lower number
-+# means higher priority, and negative priorities are allowed.
-+# Priority is numeric value.
-+#pri = 0
-+
-+# Controling if repository index will be implicit loaded. Set it off if
-+# the index should be loaded on demand only, i.e. if specified directly
-+# by --sn option.
-+#auto = yes
-+
-+# Controls if repository index will be implicit updated. Set it off if
-+# the index should be updated on demand only, i.e. if specified directly
-+# by --sn option.
-+#autoup = yes
-+
-+# Packages PGP/GPG signatures (if any) will be verified before their
-+# installation.
-+#signed = no
-+
-+# Have the same meaning as [global] parameter. Example:
-+# hold = kernel* dev
-+#hold =
-+
-+# Have the same meaning as [global] parameter. Example:
-+# ignore = kernel*smp* dev
-+#ignore =
-+
-+# Parameter have the same meaning as [global] parameter.
-+# exclude path = usr/share/doc:usr/share/man:usr/src
-+#exclude path =
-+
-+# Preferred language of package descriptions. If not set, taken from locale
-+# settings. Example:
-+# lang = pl_PL:lt_LT
-+#lang =
-+
-+[source]
-+name = home
-+type = dir
-+path = $HOME/rpm/RPMS
-+auto = no
-+autoup = no
-+
-+#[source]
-+#type = pndir
-+#name = foo
-+#path = ftp://ftp.foo.bar.org/RPMS/
-+#pri = -10
-+#auto = no
-+#autoup = no
-+#signed = yes
-+#hold = kernel*
-+#ignore = kernel*-smp-*
-+#dscr = pl_PL
-+
--- util-vserver-0.30.214.org/distrib/pld-th/rpm/macros 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-th/rpm/macros 2007-11-15 23:20:48.184505622 +0100
@@ -0,0 +1,4 @@
+# you have to use at least one language beside 'C'
+%_install_langs C:en:pl
+%_netsharedpath /dev
---- util-vserver-0.30.214.org/distrib/pld-th/rpmlist.d/00.lst 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-th/rpmlist.d/00.lst 2007-11-15 23:20:48.184505622 +0100
-@@ -0,0 +1,10 @@
-+basesystem-*.rpm
-+dev-*.rpm
-+FHS-*.rpm
-+glibc-misc-*.rpm
-+glibc-[0-9]*.rpm
-+libgcc-[0-9]*.rpm
-+setup-*.rpm
-+issue-[0-9]*.rpm
-+rpm-base-*.rpm
-+vserver-packages-*.rpm
--- util-vserver-0.30.214.org/distrib/pld-ti/pkgs/01 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-ti/pkgs/01 2007-11-15 23:20:48.217840583 +0100
@@ -0,0 +1,5 @@
+issue
+rpm-base
+vserver-packages
---- util-vserver-0.30.214.org/distrib/pld-ti/poldek/aliases.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ti/poldek/aliases.conf 2007-11-15 23:20:48.217840583 +0100
-@@ -0,0 +1,30 @@
-+# System wide aliases
-+# ls
-+ll = ls -l
-+llu = ls -lu
-+llU = ls -lU
-+lli = ls -lI
-+
-+# install
-+freshen = install -FN
-+upgrade = install -F
-+
-+# for backward compatybility, greedy is on by default now
-+greedy-upgrade = install -FG
-+
-+just-install = install -IN
-+
-+# search
-+what-requires = search -r
-+what-provides = search -p
-+rsearch = search --perlre
-+
-+exit = quit
-+
-+# for fun
-+#ls = uninstall kernel
-+
-+less = !less
-+grep = !grep
-+awk = !awk
-+
---- util-vserver-0.30.214.org/distrib/pld-ti/poldek/fetch.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ti/poldek/fetch.conf 2007-11-15 23:20:48.217840583 +0100
-@@ -0,0 +1,62 @@
-+# Configuration of poldek external file getters. Each [fetcher] section
-+# declares one external downloader. The syntax is:
-+# [fetcher]
-+# name = NAME
-+# proto = PROTOCOL[ ,PROTOCOL... ]
-+# cmd = CMD [OPTION...] DESTINATION-MACRO URL-MACRO
-+# Possible parameters are:
-+#
-+#[fetcher]
-+# Unique name of the fetcher. This is an optional parameter, if not set then
-+# name is taken from the "cmd" parameter value as "$(basename $cmd)".
-+#name = foo
-+
-+# Protocol or protocols supported by fetcher. Name of the protocol can be
-+# completely arbitrary, i.e. if you can handle protocol "foo" by writing
-+# a script which takes URLs in form 'foo://'.
-+#proto = foo,bar
-+
-+# Parameter specifies an external command and its invoking syntax.
-+# The syntax of "cmd" is:
-+# cmd = COMMAND [ OPTION... ] {%d,%D} {%p,%P}[n]
-+# Where COMMAND is the name or full path of command, OPTION is command specific
-+# options. Macro '%d' is replaced with cache directory, '%D' is replaced with
-+# 'cache directory/file basename', and '%p' with file basename, %P with file full
-+# path (URL). Optional suffix 'n' with %p and %P means that command can be
-+# invoked with multiple files at once.
-+#cmd = foogetter.sh -N %D %Pn
-+
-+##Configured fetchers
-+[fetcher]
-+proto = cdrom
-+cmd = vfjuggle %d %Pn
-+
-+[fetcher]
-+proto = http,ftp,https
-+cmd = wget -N --dot-style=binary -P %d %Pn
-+
-+[fetcher]
-+proto = http,ftp
-+cmd = snarf %P %D
-+
-+[fetcher]
-+proto = https
-+cmd = curl %P -o %D
-+
-+[fetcher]
-+proto = rsync
-+cmd = rsync -v %P %d
-+
-+[fetcher]
-+proto = smb
-+cmd = vfsmb -v %P %d
-+
-+#[fetcher]
-+#proto = ssh
-+#cmd = vfssh.sh %d %Pn
-+
-+#[fetcher]
-+#proto = foo
-+#cmd = foo.sh %d %Pn
-+
-+
--- util-vserver-0.30.214.org/distrib/pld-ti/poldek/pld-source.conf 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-ti/poldek/pld-source.conf 2007-11-15 23:20:48.217840583 +0100
@@ -0,0 +1,46 @@
+
+# Taking into account package Conflicts.
+#conflicts = yes
---- util-vserver-0.30.214.org/distrib/pld-ti/poldek/source.conf 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ti/poldek/source.conf 2007-11-15 23:20:48.217840583 +0100
-@@ -0,0 +1,85 @@
-+# Sample poldek sources configuration
-+# Every source is configured in his own [source] section.
-+# Possible parameters are:
-+#
-+#[source]
-+# Unique name of the repository.
-+#name = foo
-+
-+# Type of repository index. Permitted values are 'pndir', 'pdir', 'apt', 'yum'
-+# and 'dir' as listed by --stl switch.
-+#type = pndir
-+
-+# This parameter sets index original type i.e type of repository
-+# from what this repository is created. Default is 'dir' - means
-+# that directory of packages is scanned.
-+#original type = dir
-+
-+# Unique name of the repository. May be either path or URL.
-+#path = /some/url/or/dir
-+
-+# If package index and packages are stored in different locations then
-+# prefix stands for packages path.
-+#prefix = /some/url/or/dir
-+
-+# Controls visibility of multiple package instances with different EVR.
-+# If on, only one, highest version will be visible.
-+#douniq = no
-+
-+# Repository priority. If the same packages (equal names and EVR)
-+# are available in more than one source then package from highest
-+# prioritized source are taken. Priority is numeric value. Lower number
-+# means higher priority, and negative priorities are allowed.
-+# Priority is numeric value.
-+#pri = 0
-+
-+# Controling if repository index will be implicit loaded. Set it off if
-+# the index should be loaded on demand only, i.e. if specified directly
-+# by --sn option.
-+#auto = yes
-+
-+# Controls if repository index will be implicit updated. Set it off if
-+# the index should be updated on demand only, i.e. if specified directly
-+# by --sn option.
-+#autoup = yes
-+
-+# Packages PGP/GPG signatures (if any) will be verified before their
-+# installation.
-+#signed = no
-+
-+# Have the same meaning as [global] parameter. Example:
-+# hold = kernel* dev
-+#hold =
-+
-+# Have the same meaning as [global] parameter. Example:
-+# ignore = kernel*smp* dev
-+#ignore =
-+
-+# Parameter have the same meaning as [global] parameter.
-+# exclude path = usr/share/doc:usr/share/man:usr/src
-+#exclude path =
-+
-+# Preferred language of package descriptions. If not set, taken from locale
-+# settings. Example:
-+# lang = pl_PL:lt_LT
-+#lang =
-+
-+[source]
-+name = home
-+type = dir
-+path = $HOME/rpm/RPMS
-+auto = no
-+autoup = no
-+
-+#[source]
-+#type = pndir
-+#name = foo
-+#path = ftp://ftp.foo.bar.org/RPMS/
-+#pri = -10
-+#auto = no
-+#autoup = no
-+#signed = yes
-+#hold = kernel*
-+#ignore = kernel*-smp-*
-+#dscr = pl_PL
-+
--- util-vserver-0.30.214.org/distrib/pld-ti/rpm/macros 1970-01-01 01:00:00.000000000 +0100
+++ util-vserver-0.30.214/distrib/pld-ti/rpm/macros 2007-11-15 23:20:48.221174080 +0100
@@ -0,0 +1,4 @@
+# you have to use at least one language beside 'C'
+%_install_langs C:en:pl
+%_netsharedpath /dev
---- util-vserver-0.30.214.org/distrib/pld-ti/rpmlist.d/00.lst 1970-01-01 01:00:00.000000000 +0100
-+++ util-vserver-0.30.214/distrib/pld-ti/rpmlist.d/00.lst 2007-11-15 23:20:48.221174080 +0100
-@@ -0,0 +1,10 @@
-+basesystem-*.rpm
-+dev-*.rpm
-+FHS-*.rpm
-+glibc-misc-*.rpm
-+glibc-[0-9]*.rpm
-+libgcc-[0-9]*.rpm
-+setup-*.rpm
-+issue-[0-9]*.rpm
-+rpm-base-*.rpm
-+vserver-packages-*.rpm
--- util-vserver-0.30.214.org/scripts/functions 2007-09-02 22:06:41.000000000 +0200
+++ util-vserver-0.30.214/scripts/functions 2007-11-15 23:20:48.221174080 +0100
@@ -403,6 +403,20 @@
projects / packages / util-vserver.git / commitdiff