1 diff -urN nrpe-4.0.3.org/sample-config/nrpe.cfg.in nrpe-4.0.3/sample-config/nrpe.cfg.in
2 --- nrpe-4.0.3.org/sample-config/nrpe.cfg.in 2020-04-28 23:10:40.000000000 +0200
3 +++ nrpe-4.0.3/sample-config/nrpe.cfg.in 2021-06-11 11:03:15.467505455 +0200
5 # If this option is not set, the error messages will be logged.
9 -# Command definitions that this daemon will run. Definitions
10 -# are in the following format:
12 -# command[<command_name>]=<command_line>
14 -# When the daemon receives a request to return the results of <command_name>
15 -# it will execute the command specified by the <command_line> argument.
17 -# Unlike Nagios, the command line cannot contain macros - it must be
18 -# typed exactly as it should be executed.
20 -# Note: Any plugins that are used in the command lines must reside
21 -# on the machine that this daemon is running on! The examples below
22 -# assume that you have plugins installed in a /usr/local/nagios/libexec
23 -# directory. Also note that you will have to modify the definitions below
24 -# to match the argument format the plugins expect. Remember, these are
28 -# The following examples use hardcoded command arguments...
29 -# This is by far the most secure method of using NRPE
31 -command[check_users]=@pluginsdir@/check_users -w 5 -c 10
32 -command[check_load]=@pluginsdir@/check_load -r -w .15,.10,.05 -c .30,.25,.20
33 -command[check_hda1]=@pluginsdir@/check_disk -w 20% -c 10% -p /dev/hda1
34 -command[check_zombie_procs]=@pluginsdir@/check_procs -w 5 -c 10 -s Z
35 -command[check_total_procs]=@pluginsdir@/check_procs -w 150 -c 200
38 -# The following examples allow user-supplied arguments and can
39 -# only be used if the NRPE daemon was compiled with support for
40 -# command arguments *AND* the dont_blame_nrpe directive in this
41 -# config file is set to '1'. This poses a potential security risk, so
42 -# make sure you read the SECURITY file before doing this.
44 -### MISC SYSTEM METRICS ###
45 -#command[check_users]=@pluginsdir@/check_users $ARG1$
46 -#command[check_load]=@pluginsdir@/check_load $ARG1$
47 -#command[check_disk]=@pluginsdir@/check_disk $ARG1$
48 -#command[check_swap]=@pluginsdir@/check_swap $ARG1$
49 -#command[check_cpu_stats]=@pluginsdir@/check_cpu_stats.sh $ARG1$
50 -#command[check_mem]=@pluginsdir@/custom_check_mem -n $ARG1$
52 -### GENERIC SERVICES ###
53 -#command[check_init_service]=sudo @pluginsdir@/check_init_service $ARG1$
54 -#command[check_services]=@pluginsdir@/check_services -p $ARG1$
56 -### SYSTEM UPDATES ###
57 -#command[check_yum]=@pluginsdir@/check_yum
58 -#command[check_apt]=@pluginsdir@/check_apt
61 -#command[check_all_procs]=@pluginsdir@/custom_check_procs
62 -#command[check_procs]=@pluginsdir@/check_procs $ARG1$
65 -#command[check_open_files]=@pluginsdir@/check_open_files.pl $ARG1$
67 -### NETWORK CONNECTIONS ###
68 -#command[check_netstat]=@pluginsdir@/check_netstat.pl -p $ARG1$ $ARG2$
71 -#command[check_asterisk]=@pluginsdir@/check_asterisk.pl $ARG1$
72 -#command[check_sip]=@pluginsdir@/check_sip $ARG1$
73 -#command[check_asterisk_sip_peers]=sudo @pluginsdir@/check_asterisk_sip_peers.sh $ARG1$
74 -#command[check_asterisk_version]=@pluginsdir@/nagisk.pl -c version
75 -#command[check_asterisk_peers]=@pluginsdir@/nagisk.pl -c peers
76 -#command[check_asterisk_channels]=@pluginsdir@/nagisk.pl -c channels
77 -#command[check_asterisk_zaptel]=@pluginsdir@/nagisk.pl -c zaptel
78 -#command[check_asterisk_span]=@pluginsdir@/nagisk.pl -c span -s 1
82 -# INCLUDE CONFIG FILE
83 -# This directive allows you to include definitions from an external config file.
85 -#include=<somefile.cfg>
89 # INCLUDE CONFIG DIRECTORY
90 # This directive allows you to include definitions from config files (with a
91 # .cfg extension) in one or more directories (with recursion).
93 # when starting the NRPE daemon.
95 #keep_env_vars=NRPE_MULTILINESUPPORT,NRPE_PROGRAMVERSION
97 +#include_dir=<somedirectory>
98 +#include_dir=<someotherdirectory>
99 +include_dir=/etc/nagios/nrpe.d