-#
# Base configuration file for MPD on PLD-linux
#
# Based on the example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
-
-######################## REQUIRED PATHS ########################
-# XXX Is there a better solution to music_directory? IMHO this is computer-specific. (uzsolt)
-music_directory "/music"
-playlist_directory "/var/lib/mpd/playlists"
-db_file "/var/lib/mpd/mpd.db"
-log_file "/var/log/mpd/mpd.log"
-error_file "/var/log/mpd/mpd.error"
-################################################################
-
-
-######################## OPTIONAL PATHS ########################
#
-# If you wish to use mpd --kill to stop MPD, then you must
-# specify a file here in which to store MPD's process ID.
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
#
-pid_file "/var/run/mpd/mpd.pid"
+music_directory "/music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory "/var/lib/mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file "/var/lib/mpd/mpd.db"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
#
-# If specified, MPD will save its current state (playlist,
-# current song, playing/paused, etc.) at exit. This will be
-# used to restore the session the next time it is run.
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
#
-state_file "/var/run/mpd/mpdstate"
+log_file "/var/log/mpd/mpd.log"
#
-################################################################
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+pid_file "/var/run/mpd/mpd.pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file "/var/lib/mpd/mpdstate"
+#
+# The location of the sticker database. This is a database which
+# manages dynamic information attached to songs.
+#
+sticker_file "/var/lib/mpd/sticker.sql"
+#
+###############################################################################
-######################## DAEMON OPTIONS ########################
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+user "mpd"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
#
-# If started as root, MPD will drop root privileges and run as
-# this user instead. Otherwise, MPD will run as the user it was
-# started by. If left unspecified, MPD will not drop root
-# privileges at all (not recommended).
+#group "nogroup"
#
-user "mpd"
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon.
#
-# The address and port to listen on.
+# For network
+#bind_to_address "any"
#
-#bind_to_address "any"
-#port "6600"
+# And for Unix Socket
+#bind_to_address "~/.mpd/socket"
#
-# Controls the amount of information that is logged. Can be
-# "default", "secure", or "verbose".
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
#
-#log_level "default"
+#port "6600"
#
-################################################################
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback "yes"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. Optionally, 'comment' can be added to this
+# list.
+#
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update "yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself. There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
-########################### ZEROCONF ###########################
+# Symbolic link behavior ######################################################
#
-# If yes, service information will be published with Zeroconf.
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
#
-#zeroconf_enabled "yes"
+#follow_outside_symlinks "yes"
#
-# The service name to publish. This name should be unique on
-# your local network.
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
#
-#zeroconf_name "Music Player"
+#follow_inside_symlinks "yes"
#
-################################################################
+###############################################################################
-########################## PERMISSIONS #########################
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled "yes"
#
-# MPD can require that users specify a password before using it.
-# You may specify one ore more here, along with what users who
-# log in with that password are allowed to do.
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# can setting can be specified multiple times for different password profiles.
#
#password "password@read,add,control,admin"
#
-# Specifies what permissions a user who has not logged in with a
-# password has. By default, all users have full access to MPD
-# if no password is specified above, or no access if one or
-# more passwords are specified.
+# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions "read,add,control,admin"
#
-################################################################
+###############################################################################
-########################## AUDIO OUTPUT ########################
+# Input #######################################################################
#
-# MPD supports many audio output types, as well as playing
-# through multiple audio outputs at the same time. You can
-# specify one or more here. If you don't specify any, MPD will
-# automatically scan for a usable audio output.
+
+input {
+ plugin "curl"
+# proxy "proxy.isp.com:8080"
+# proxy_user "user"
+# proxy_password "password"
+}
+
#
-# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs>
-# for examples of other audio outputs.
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
+# other audio outputs.
#
# An example of an ALSA output:
#
audio_output {
- type "alsa"
- name "My ALSA Device"
-# device "hw:0,0" # optional
-# format "44100:16:2" # optional
+ type "alsa"
+ name "My ALSA Device"
+## device "hw:0,0" # optional
+## format "44100:16:2" # optional
+## mixer_type "hardware" # optional
+## mixer_device "default" # optional
+## mixer_control "PCM" # optional
+## mixer_index "0" # optional
}
#
# An example of an OSS output:
#
#audio_output {
-# type "oss"
-# name "My OSS Device"
-# device "/dev/dsp" # optional
-# format "44100:16:2" # optional
+# type "oss"
+# name "My OSS Device"
+## device "/dev/dsp" # optional
+## format "44100:16:2" # optional
+## mixer_type "hardware" # optional
+## mixer_device "/dev/mixer" # optional
+## mixer_control "PCM" # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
-# type "shout"
-# name "My Shout Stream"
-# host "localhost"
-# port "8000"
-# mount "/mpd.ogg"
-# password "hackme"
-# quality "5.0"
-# bitrate "128"
-# format "44100:16:1"
-# user "source" # optional
-# description "My Stream Description" # optional
-# genre "jazz" # optional
-# public "no" # optional
+# type "shout"
+# encoding "ogg" # optional
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+## protocol "icecast2" # optional
+## user "source" # optional
+## description "My Stream Description" # optional
+## genre "jazz" # optional
+## public "no" # optional
+## timeout "2" # optional
+## mixer_type "software" # optional
#}
#
-# Force all decoded audio to be converted to this format before
-# being passed to the audio outputs.
-#
-#audio_output_format "44100:16:2"
-#
-# If MPD has been compiled with libsamplerate support, this
-# specifies the sample rate converter to use. Possible
-# values can be found in the mpd.conf man page or the
-# libsamplerate documentation.
+# An example of a recorder output:
#
-#samplerate_converter "Fastest Sinc Interpolator"
-#
-################################################################
-
-
-############################# MIXER ############################
-#
-# MPD needs to know what mixer settings to change when you
-# adjust the volume. If you don't specify one here, MPD will
-# pick one based on which ones it was compiled with support for.
-#
-# An example for controlling an ALSA mixer:
+#audio_output {
+# type "recorder"
+# name "My recorder"
+# encoder "vorbis" # optional, vorbis or lame
+# path "/var/lib/mpd/recorder/mpd.ogg"
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+#}
#
-# XXX I hope that this is good - maybe system-specific? (uzsolt)
-mixer_type "alsa"
-mixer_device "default"
-mixer_control "PCM"
+# An example of a httpd output (built-in HTTP streaming server):
#
-# An example for controlling an OSS mixer:
+#audio_output {
+# type "httpd"
+# name "My HTTP Stream"
+# encoder "vorbis" # optional, vorbis or lame
+# port "8000"
+# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+# max_clients "0" # optional 0=no limit
+#}
#
-#mixer_type "oss"
-#mixer_device "/dev/mixer"
-#mixer_control "PCM"
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
-# If you want MPD to adjust the volume of audio sent to the
-# audio outputs, you can tell it to use the software mixer:
+#audio_output {
+# type "pulse"
+# name "My Pulse Output"
+## server "remote_server" # optional
+## sink "remote_server_sink" # optional
+#}
#
-#mixer_type "software"
+## Example "pipe" output:
#
-################################################################
-
-
-######################### NORMALIZATION ########################
+#audio_output {
+# type "pipe"
+# name "my pipe"
+# command "aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+# command "AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+# command "nc example.org 8765"
+# format "44100:16:2"
+#}
#
-# Specifies the type of ReplayGain to use. Can be "album" or
-# "track". ReplayGain will not be used if not specified. See
-# <http://www.replaygain.org> for more details.
+## An example of a null output (for no audio output):
#
-#replaygain "album"
+#audio_output {
+# type "null"
+# name "My Null Output"
+# mixer_type "none" # optional
+#}
#
-# Sets the pre-amp used for files that have ReplayGain tags.
+# This setting will change all decoded audio to be converted to the specified
+# format before being passed to the audio outputs. By default, this setting is
+# disabled.
#
-#replaygain_preamp "0"
+#audio_output_format "44100:16:2"
#
-# Enable on the fly volume normalization. This will cause the
-# volume of all songs played to be adjusted so that they sound
-# as though they are of equal loudness.
+# If MPD has been compiled with libsamplerate support, this setting specifies
+# the sample rate converter to use. Possible values can be found in the
+# mpd.conf man page or the libsamplerate documentation. By default, this is
+# setting is disabled.
#
-#volume_normalization "no"
+#samplerate_converter "Fastest Sinc Interpolator"
#
-################################################################
+###############################################################################
-########################### BUFFERING ##########################
+# Normalization automatic volume adjustments ##################################
#
-# The size of the buffer containing decoded audio. You probably
-# shouldn't change this.
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album" or "track". See <http://www.replaygain.org>
+# for more details. This setting is off by default.
#
-#audio_buffer_size "2048"
+#replaygain "album"
#
-# How much of the buffer to fill before beginning to play.
-# Increase this if you hear skipping when changing songs.
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
#
-#buffer_before_play "10%"
+#replaygain_preamp "0"
#
-# Similar options for the HTTP stream buffer. If you hear
-# skipping while playing HTTP streams, you may wish to increase
-# these.
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
#
-#http_buffer_size "128"
-#http_prebuffer_size "25%"
+#volume_normalization "no"
#
-################################################################
+###############################################################################
-########################### HTTP PROXY #########################
-#
-# Specifies the HTTP proxy to use for playing HTTP streams.
+# MPD Internal Buffering ######################################################
#
-#http_proxy_host "proxy.isp.com"
-#http_proxy_port "8080"
-#http_proxy_user "user"
-#http_proxy_password "password"
+# This setting adjusts the size of internal decoded audio buffering. Changing
+# this may have undesired effects. Don't change this if you don't know what you
+# are doing.
#
-################################################################
-
-
-############################# LIMITS ###########################
+#audio_buffer_size "2048"
#
-# These are various limits to prevent MPD from using too many
-# resources. You should only change them if they start
-# restricting your usage of MPD.
+# This setting controls the percentage of the buffer which is filled before
+# beginning to play. Increasing this reduces the chance of audio file skipping,
+# at the cost of increased time prior to audio playback.
#
-#connection_timeout "60"
-#max_connections "5"
-#max_playlist_length "16384"
-#max_command_list_size "2048"
-#max_output_buffer_size "8192"
+#buffer_before_play "10%"
#
-################################################################
+###############################################################################
-###################### CHARACTER ENCODINGS #####################
-#
-# If file or directory names do not display correctly, then you
-# may need to change this. In most cases it should be either
-# "ISO-8859-1" or "UTF-8". You must recreate your database
-# after changing this (use mpd --create-db).
+# Resource Limitations ########################################################
#
-# XXX is this evident in 2008 and PLD? (uzsolt)
-filesystem_charset "UTF-8"
+# These settings are various limitations to prevent MPD from using too many
+# resources. Generally, these settings should be minimized to prevent security
+# risks, depending on the operating resources.
#
-# The encoding that ID3v1 tags should be converted from.
+#connection_timeout "60"
+#max_connections "10"
+#max_playlist_length "16384"
+#max_command_list_size "2048"
+#max_output_buffer_size "8192"
#
-#id3v1_encoding "ISO-8859-1"
-#
-################################################################
+###############################################################################
-######################### OTHER OPTIONS ########################
-#
-# Try disabling this if you have MP3s which appear to end
-# abruptly. If this solves the problem, it is highly
-# recommended that you fix your MP3s with vbrfix (available from
-# <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point you can re-enable support for gapless MP3 playback.
+# Character Encoding ##########################################################
#
-#gapless_mp3_playback "yes"
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
#
-# Enable this if you wish to use your MPD created playlists in
-# other music players.
+filesystem_charset "UTF-8"
#
-#save_absolute_paths_in_playlists "no"
+# This setting controls the encoding that ID3v1 tags should be converted from.
#
-# A list of tag types that MPD will scan for and make available
-# to clients.
+#id3v1_encoding "ISO-8859-1"
#
-#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+###############################################################################
+
+
+# SIDPlay decoder #############################################################
+#
+# songlength_database:
+# Location of your songlengths file, as distributed with the HVSC.
+# The sidplay plugin checks this for matching MD5 fingerprints.
+# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
+#
+# default_songlength:
+# This is the default playing time in seconds for songs not in the
+# songlength database, or in case you're not using a database.
+# A value of 0 means play indefinitely.
+#
+# filter:
+# Turns the SID filter emulation on or off.
+#
+#decoder {
+# plugin "sidplay"
+# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
+# default_songlength "120"
+# filter "true"
+#}
#
-################################################################
+###############################################################################
+
projects / packages / mpd.git / commitdiff