2 # - BUG: you can't set in /etc/mdadm.conf:
3 # DEVICE partitions containers
4 # (which is default BTW if none set). Generation of initrd will fail
6 Summary: Creates an initial ramdisk image for preloading modules
7 Summary(pl.UTF-8): Narzędzie do tworzenia inicjalnego ramdysku używanego przy starcie systemu
13 Group: Applications/System
14 Source0: %{name}-%{version}.tar.gz
15 # Source0-md5: 9d75e347ff49312209e97ead93378f4a
16 Patch0: %{name}-romfs.patch
17 Patch1: %{name}-gzip-compressor.patch
18 Patch2: %{name}-svn.patch
19 BuildRequires: xmlto >= 0:0.0.18-1
20 Requires: /usr/bin/ldd
22 Requires: busybox-initrd > 1.00-4
28 Requires: mktemp >= 1.5-8
29 Requires: module-init-tools >= 3.2.2-6
31 Requires: pci-database >= 0.4
32 Requires: rc-scripts >= 0.2.7
34 %if "%{pld_release}" == "ti"
36 Requires: mdadm-initrd >= 1.12.0-1
38 # otherwise LVM subsystem is not enabled in geninitrd
40 # without this softraid installations of PLD fail
41 Suggests: mdadm-initrd >= 1.12.0-1
44 %if "%{pld_release}" != "ac"
45 Suggests: util-linux-initrd
48 %if "%{pld_release}" == "ac"
49 Conflicts: grubby < 5.0.4-3.1
51 Conflicts: grubby < 6.0.24-3
53 Conflicts: udev-initrd < 1:104
54 Conflicts: xz < 4.999.9
56 BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
59 Geninitrd creates filesystem images for use as initial ramdisk
60 (initrd) images. These ramdisk images are often used to preload the
61 block device modules (SCSI or RAID) needed to access the root
64 In other words, generic kernels can be built without drivers for any
65 SCSI adapters which load the SCSI driver as a module. Since the kernel
66 needs to read those modules, but in this case it isn't able to address
67 the SCSI adapter, an initial ramdisk is used. The initial ramdisk is
68 loaded by the operating system loader (normally LILO) and is available
69 to the kernel as soon as the ramdisk is loaded. The ramdisk image
70 loads the proper SCSI adapter and allows the kernel to mount the root
71 filesystem. The geninitrd program creates such a ramdisk using
72 information found in the /etc/modules.conf file.
74 %description -l pl.UTF-8
75 Geninitrd służy do tworzenia obrazu systemu plikowego używanego jako
76 inicjalny ramdysk (initrd), z którego przy starcie systemu są ładowane
77 moduły kernela z obsługą urządzeń których obsługa nie jest
78 wkompilowana w kernel. Zazwyczaj modułami ładowanymi z inicjalnego
79 systemu plikowego są sterowniki SCSI, IDE czy też RAID po to żeby w
80 dalszej części inicjacji systemu był możliwy dostęp do głównego
81 systemu plikowego (root fs).
83 Dzięki initrd jest możliwe używanie dystrybucyjnego kernela w którym
84 wkompilowana jest minimalna ilość obsługi różnych urządzeń, a reszta
85 kodu obsługi sterowników SCSI, IDE czy RAID jest doczytywana w trakcie
86 startu z initrd. Skrypt geninitrd generuje obraz ramdysku na podstawie
87 bieżących informacji zawartych w /etc/modules.conf.
91 %if "%{pld_release}" == "ti"
101 rm -rf $RPM_BUILD_ROOT
104 DESTDIR=$RPM_BUILD_ROOT
107 rm -rf $RPM_BUILD_ROOT
110 %defattr(644,root,root,755)
112 %config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/geninitrd
113 %attr(755,root,root) /sbin/geninitrd
114 %{_mandir}/man8/geninitrd.8*
117 /lib/geninitrd/functions
118 /lib/geninitrd/mod-*.sh
119 %attr(755,root,root) /lib/geninitrd/extract-ikconfig