+++ /dev/null
-######################################################################
-# Runtime configuration file for Exim #
-######################################################################
-
-
-# This is a default configuration file which will operate correctly in
-# uncomplicated installations. Please see the manual for a complete list
-# of all the runtime configuration options that can be included in a
-# configuration file. There are many more than are mentioned here. The
-# manual is in the file doc/spec.txt in the Exim distribution as a plain
-# ASCII file. Other formats (PostScript, Texinfo, HTML) are available from
-# the Exim ftp sites. The manual is also online via the Exim web sites.
-
-
-# This file is divided into several parts, all but the last of which are
-# terminated by a line containing the word "end". The parts must appear
-# in the correct order, and all must be present (even if some of them are
-# in fact empty). Blank lines, and lines starting with # are ignored.
-
-
-
-######################################################################
-# MAIN CONFIGURATION SETTINGS #
-######################################################################
-
-# Specify your host's canonical name here. This should normally be the fully
-# qualified "official" name of your host. If this option is not set, the
-# uname() function is called to obtain the name.
-
-# primary_hostname =
-
-
-# Specify the domain you want to be added to all unqualified addresses
-# here. An unqualified address is one that does not contain an "@" character
-# followed by a domain. For example, "caesar@rome.ex" is a fully qualified
-# address, but the string "caesar" (i.e. just a login name) is an unqualified
-# email address. Unqualified addresses are accepted only from local callers by
-# default. See the receiver_unqualified_{hosts,nets} options if you want
-# to permit unqualified addresses from remote sources. If this option is
-# not set, the primary_hostname value is used for qualification.
-
-# qualify_domain =
-
-
-# If you want unqualified recipient addresses to be qualified with a different
-# domain to unqualified sender addresses, specify the recipient domain here.
-# If this option is not set, the qualify_domain value is used.
-
-# qualify_recipient =
-
-
-# Specify your local domains as a colon-separated list here. If this option
-# is not set (i.e. not mentioned in the configuration file), the
-# qualify_recipient value is used as the only local domain. If you do not want
-# to do any local deliveries, uncomment the following line, but do not supply
-# any data for it. This sets local_domains to an empty string, which is not
-# the same as not mentioning it at all. An empty string specifies that there
-# are no local domains; not setting it at all causes the default value (the
-# setting of qualify_recipient) to be used.
-
-# local_domains =
-
-
-# If you want to accept mail addressed to your host's literal IP address, for
-# example, mail addressed to "user@[111.111.111.111]", then uncomment the
-# following line, or supply the literal domain(s) as part of "local_domains"
-# above.
-
-# local_domains_include_host_literals
-
-
-# No local deliveries will ever be run under the uids of these users (a colon-
-# separated list). An attempt to do so gets changed so that it runs under the
-# uid of "nobody" instead. This is a paranoic safety catch. Note the default
-# setting means you cannot deliver mail addressed to root as if it were a
-# normal user. This isn't usually a problem, as most sites have an alias for
-# root that redirects such mail to a human administrator.
-
-never_users = root
-
-
-# The use of your host as a mail relay by any host, including the local host
-# calling its own SMTP port, is locked out by default. If you want to permit
-# relaying from the local host, you should set
-#
-host_accept_relay = localhost
-#
-# If you want to permit relaying through your host from certain hosts or IP
-# networks, you need to set the option appropriately, for example
-#
-# host_accept_relay = my.friends.host : 131.111.0.0/16
-#
-# If you are an MX backup or gateway of some kind for some domains, you must
-# set relay_domains to match those domains. This will allow any host to
-# relay through your host to those domains.
-#
-# See the section of the manual entitled "Control of relaying" for more
-# information.
-
-# The information bellow is used for configuring exim to use SMTP AUTH
-# NOTICE: You will need to set "exim_user" to "root" for this to work
-#
-# If you want to permit relay for some hosts, but they need to authenticate:
-# host_auth_accept_relay = *
-#
-# If you want the some hosts to require authentication for anything:
-# auth_hosts = *
-#
-# This is the configuration for SSL/TLS support
-#
-# Which hosts you want exim to advertise the support for TLS to
-#
-# tls_advertise_hosts = *
-#
-# The full path to the certificate and private keys (you will need to
-# create these using openssl)
-#
-# tls_certificate = /var/lib/openssl/certs/exim.pem
-# tls_privatekey = /var/lib/openssl/certs/exim.pem
-#
-# Hosts that NEED to use tls to connect
-#
-# tls_hosts = foo.bar
-#
-
-# The setting below causes Exim to do a reverse DNS lookup on all incoming
-# IP calls, in order to get the true host name. If you feel this is too
-# expensive, you can specify the networks for which a lookup is done, or
-# remove the setting entirely.
-
-host_lookup = 0.0.0.0/0
-
-
-# By default, Exim expects all envelope addresses to be fully qualified, that
-# is, they must contain both a local part and a domain. If you want to accept
-# unqualified addresses (just a local part) from certain hosts, you can specify
-# these hosts by setting one or both of
-#
-# receiver_unqualified_hosts =
-# sender_unqualified_hosts =
-#
-# to control sender and receiver addresses, respectively. When this is done,
-# unqualified addresses are qualified using the settings of qualify_domain
-# and/or qualify_recipient (see above).
-
-
-# Exim contains support for the Realtime Blocking List (RBL) that is being
-# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background.
-# Uncommenting the first line below will make Exim reject mail from any
-# host whose IP address is blacklisted in the RBL at maps.vix.com. Some
-# others have followed the RBL lead and have produced other lists: DUL is
-# a list of dial-up addresses, and ORBS is a list of open relay systems. The
-# second line below checks all three lists.
-
-# rbl_domains = rbl.maps.vix.com
-# rbl_domains = rbl.maps.vix.com:dul.maps.vix.com:relays.orbs.org
-
-
-# If you want Exim to support the "percent hack" for all your local domains,
-# uncomment the following line. This is the feature by which mail addressed
-# to x%y@z (where z is one of your local domains) is locally rerouted to
-# x@y and sent on. Otherwise x%y is treated as an ordinary local part.
-
-# percent_hack_domains = *
-
-
-# This emulates sendmails "newaliases". Keep in mind that the alias
-# transport does use lsearch by default. remember to change this,
-# if you want to use DBM-Lookups.
-
-bi_command=/usr/bin/newaliases
-
-end
-
-
-
-######################################################################
-# TRANSPORTS CONFIGURATION #
-######################################################################
-# ORDER DOES NOT MATTER #
-# Only one appropriate transport is called for each delivery. #
-######################################################################
-
-# A transport is used only when referenced from a director or a router that
-# successfully handles an address.
-
-
-# This transport is used for delivering messages over SMTP connections.
-
-remote_smtp:
- driver = smtp
-
-
-# This transport is used for local delivery to user mailboxes. By default
-# it will be run under the uid and gid of the local user, and requires
-# the sticky bit to be set on the /var/mail directory. Some systems use
-# the alternative approach of running mail deliveries under a particular
-# group instead of using the sticky bit. The commented options below show
-# how this can be done.
-
-# Modification by Florian Wallner <wallner@speed-link.de> make use of
-# procmail as director if a user has a .procmailrc to avoid breaking
-# something that worked before.
-
-procmail:
- driver = pipe
- command = "/usr/bin/procmail -d ${local_part}"
-# return_path_add
-# delivery_date_add
-# envelope_to_add
-# check_string = "From "
-# escape_string = ">From "
- user = $local_part
-# group = mail
-# group = $local_part
-
-local_delivery:
- driver = appendfile
-# file = /var/mail/${local_part}
- file = ${home}/Mail/Mailbox
- delivery_date_add
- envelope_to_add
- return_path_add
- group = mail
-# mode = 0660
-
-
-# This transport is used for handling pipe deliveries generated by alias
-# or .forward files. If the pipe generates any standard output, it is returned
-# to the sender of the message as a delivery error. Set return_fail_output
-# instead of return_output if you want this to happen only when the pipe fails
-# to complete normally. You can set different transports for aliases and
-# forwards if you want to - see the references to address_pipe below.
-
-address_pipe:
- driver = pipe
- return_output
-
-
-# This transport is used for handling deliveries directly to files that are
-# generated by aliassing or forwarding.
-
-address_file:
- driver = appendfile
- delivery_date_add
- envelope_to_add
- return_path_add
-
-
-# This transport is used for handling autoreplies generated by the filtering
-# option of the forwardfile director.
-
-address_reply:
- driver = autoreply
-
-
-end
-
-
-
-######################################################################
-# DIRECTORS CONFIGURATION #
-# Specifies how local addresses are handled #
-######################################################################
-# ORDER DOES MATTER #
-# A local address is passed to each in turn until it is accepted. #
-######################################################################
-
-# Local addresses are those with a domain that matches some item in the
-# "local_domains" setting above, or those which are passed back from the
-# routers because of a "self=local" setting (not used in this configuration).
-
-
-# This director handles aliasing using a traditional /etc/aliases file.
-# If any of your aliases expand to pipes or files, you will need to set
-# up a user and a group for these deliveries to run under. You can do
-# this by uncommenting the "user" option below (changing the user name
-# as appropriate) and adding a "group" option if necessary. Alternatively, you
-# can specify "user" on the transports that are used. Note that those
-# listed below are the same as are used for .forward files; you might want
-# to set up different ones for pipe and file deliveries from aliases.
-
-# Modification by Florian Wallner <wallner@speed-link.de> use dbm
-# lookups for aliases to speed up and simulate Sendmail behaviour
-
-
-system_aliases:
- driver = aliasfile
- file = /var/spool/exim/db/aliases
- search_type = dbm
- user = mail
- file_transport = address_file
- pipe_transport = address_pipe
-
-#system_aliases:
-# driver = aliasfile
-# file = /etc/aliases
-# search_type = lsearch
-# user = exim
-# file_transport = address_file
-# pipe_transport = address_pipe
-
-
-# This director handles forwarding using traditional .forward files.
-# If you want it also to allow mail filtering when a forward file
-# starts with the string "# Exim filter", uncomment the "filter" option.
-# The check_ancestor option means that if the forward file generates an
-# address that is an ancestor of the current one, the current one gets
-# passed on instead. This covers the case where A is aliased to B and B
-# has a .forward file pointing to A. The three transports specified at the
-# end are those that are used when forwarding generates a direct delivery
-# to a file, or to a pipe, or sets up an auto-reply, respectively.
-
-userforward:
- driver = forwardfile
- file = .forward
- no_verify
- no_expn
- check_ancestor
-# filter
- file_transport = address_file
- pipe_transport = address_pipe
- reply_transport = address_reply
-
-
-# This director matches local user mailboxes.
-
-# Modification by Florian Wallner <wallner@speed-link.de> make use of
-# procmail as director if a user has a .procmailrc to avoid breaking
-# something that worked before.
-
-procmail:
- driver = localuser
- require_files = ${local_part}:${home}/.procmailrc
- transport = procmail
-
-localuser:
- driver = localuser
- transport = local_delivery
-
-
-end
-
-
-
-######################################################################
-# ROUTERS CONFIGURATION #
-# Specifies how remote addresses are handled #
-######################################################################
-# ORDER DOES MATTER #
-# A remote address is passed to each in turn until it is accepted. #
-######################################################################
-
-# Remote addresses are those with a domain that does not match any item
-# in the "local_domains" setting above.
-
-
-# This router routes to remote hosts over SMTP using a DNS lookup with
-# default options.
-
-lookuphost:
- driver = lookuphost
- transport = remote_smtp
-
-
-# This router routes to remote hosts over SMTP by explicit IP address,
-# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
-# require this facility, which is why it is enabled by default in Exim.
-# If you want to lock it out, set forbid_domain_literals in the main
-# configuration section above.
-
-literal:
- driver = ipliteral
- transport = remote_smtp
-
-
-end
-
-
-
-######################################################################
-# RETRY CONFIGURATION #
-######################################################################
-
-# This single retry rule applies to all domains and all errors. It specifies
-# retries every 15 minutes for 2 hours, then increasing retry intervals,
-# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
-# hours, then retries every 8 hours until 4 days have passed since the first
-# failed delivery.
-
-# Domain Error Retries
-# ------ ----- -------
-
-* * F,2h,15m; G,16h,1h,1.5; F,4d,8h
-
-end
-
-
-
-######################################################################
-# REWRITE CONFIGURATION #
-######################################################################
-
-# There are no rewriting specifications in this default configuration file.
-end
-
-######################################################################
-# AUTHENTICATION CONFIGURATION #
-######################################################################
-
-# There are no authenticator specifications in this default configuration file.
-# This authentication rules uses PAM. See the documentation for other methods
-
-#plain:
-# driver = plaintext
-# public_name = PLAIN
-# server_condition = "${if pam{$2:$3}{1}{0}}"
-# server_set_id = $2
-
-#login:
-# driver = plaintext
-# public_name = LOGIN
-# server_prompts = "Username:: : Password::"
-# server_condition = "${if pam{$2:$3}{1}{0}}"
-# server_set_id = $1
-
-
-# End of Exim configuration file
-
projects / packages / exim.git / commitdiff