- rel 5; update from git

[packages/exim.git] / exim4-EDITME.patch

diff -urN exim-4.64.org/src/EDITME exim-4.64/src/EDITME
--- exim-4.64.org/src/EDITME	2006-12-20 10:46:04.000000000 +0100
+++ exim-4.64/src/EDITME	2006-12-21 16:57:08.676246750 +0100
@@ -100,7 +100,7 @@
 # /usr/local/sbin. The installation script will try to create this directory,
 # and any superior directories, if they do not exist.
 
-BIN_DIRECTORY=/usr/exim/bin
+BIN_DIRECTORY=/usr/bin
 
 
 #------------------------------------------------------------------------------
@@ -116,7 +116,7 @@
 # don't exist. It will also install a default runtime configuration if this
 # file does not exist.
 
-CONFIGURE_FILE=/usr/exim/configure
+CONFIGURE_FILE=/etc/mail/exim.conf
 
 # It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
 # In this case, Exim will use the first of them that exists when it is run.
@@ -134,7 +134,8 @@
 # owner of a local mailbox.) Specifying these values as root is very strongly
 # discouraged.
 
-EXIM_USER=
+EXIM_UID=79
+EXIM_GID=79
 
 # If you specify EXIM_USER as a name, this is looked up at build time, and the
 # uid number is built into the binary. However, you can specify that this
@@ -214,7 +215,7 @@
 
 # This one is very special-purpose, so is not included by default.
 
-# ROUTER_IPLOOKUP=yes
+ROUTER_IPLOOKUP=yes
 
 
 #------------------------------------------------------------------------------
@@ -235,7 +236,7 @@
 # This one is special-purpose, and commonly not required, so it is not
 # included by default.
 
-# TRANSPORT_LMTP=yes
+TRANSPORT_LMTP=yes
 
 
 #------------------------------------------------------------------------------
@@ -244,9 +245,9 @@
 # MBX, is included only when requested. If you do not know what this is about,
 # leave these settings commented out.
 
-# SUPPORT_MAILDIR=yes
-# SUPPORT_MAILSTORE=yes
-# SUPPORT_MBX=yes
+SUPPORT_MAILDIR=yes
+SUPPORT_MAILSTORE=yes
+SUPPORT_MBX=yes
 
 
 #------------------------------------------------------------------------------
@@ -263,15 +264,15 @@
 LOOKUP_LSEARCH=yes
 LOOKUP_DNSDB=yes
 
-# LOOKUP_CDB=yes
-# LOOKUP_DSEARCH=yes
+LOOKUP_CDB=yes
+LOOKUP_DSEARCH=yes
 # LOOKUP_IBASE=yes
 # LOOKUP_LDAP=yes
 # LOOKUP_MYSQL=yes
 # LOOKUP_MYSQL_PC=mariadb
 # LOOKUP_NIS=yes
 # LOOKUP_NISPLUS=yes
 # LOOKUP_ORACLE=yes
-# LOOKUP_PASSWD=yes
+LOOKUP_PASSWD=yes
 # LOOKUP_PGSQL=yes
 # LOOKUP_SQLITE=yes
@@ -391,7 +391,7 @@ EXIM_MONITOR=eximon.bin
 # and the MIME ACL. Please read the documentation to learn more about these
 # features.
 
-# WITH_CONTENT_SCAN=yes
+WITH_CONTENT_SCAN=yes
 
 #------------------------------------------------------------------------------
 # If you're using ClamAV and are backporting fixes to an old version, instead
@@ -629,15 +630,15 @@ FIXED_NEVER_USERS=root
 # included in the Exim binary. You will then need to set up the run time
 # configuration to make use of the mechanism(s) selected.
 
-# AUTH_CRAM_MD5=yes
+AUTH_CRAM_MD5=yes
 # AUTH_CYRUS_SASL=yes
-# AUTH_DOVECOT=yes
+AUTH_DOVECOT=yes
 # AUTH_GSASL=yes
 # AUTH_GSASL_PC=libgsasl
 # AUTH_HEIMDAL_GSSAPI=yes
 # AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
 # AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi heimdal-krb5
-# AUTH_PLAINTEXT=yes
-# AUTH_SPA=yes
-# AUTH_TLS=yes
+AUTH_PLAINTEXT=yes
+AUTH_SPA=yes
+AUTH_TLS=yes
 
@@ -610,7 +611,7 @@
 # one that is set in the headers_charset option. The default setting is
 # defined by this setting:
 
-HEADERS_CHARSET="ISO-8859-1"
+HEADERS_CHARSET="UTF-8"
 
 # If you are going to make use of $header_xxx expansions in your configuration
 # file, or if your users are going to use them in filter files, and the normal
@@ -690,11 +691,11 @@
 # leave these settings commented out.
 
 # This setting is required for any TLS support (either OpenSSL or GnuTLS)
-# SUPPORT_TLS=yes
+SUPPORT_TLS=yes
 
 # Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
-# USE_OPENSSL_PC=openssl
-# TLS_LIBS=-lssl -lcrypto
+USE_OPENSSL_PC=openssl
+TLS_LIBS=-lssl -lcrypto
 
 # Uncomment the first and either the second or the third of these if you
 # are using GnuTLS.  If you have pkg-config, then the second, else the third.
@@ -630,7 +631,7 @@
 # Once you have done this, "make install" will build the info files and
 # install them in the directory you have defined.
 
-# INFO_DIRECTORY=/usr/share/info
+INFO_DIRECTORY=/usr/share/info
 
 
 #------------------------------------------------------------------------------
@@ -643,7 +644,7 @@
 # %s. This will be replaced by one of the strings "main", "panic", or "reject"
 # to form the final file names. Some installations may want something like this:
 
-# LOG_FILE_PATH=/var/log/exim_%slog
+LOG_FILE_PATH=/var/log/exim/%s.log
 
 # which results in files with names /var/log/exim_mainlog, etc. The directory
 # in which the log files are placed must exist; Exim does not try to create
@@ -692,7 +693,7 @@
 # files. Both the name of the command and the suffix that it adds to files
 # need to be defined here. See also the EXICYCLOG_MAX configuration.
 
-COMPRESS_COMMAND=/usr/bin/gzip
+COMPRESS_COMMAND=/bin/gzip
 COMPRESS_SUFFIX=gz
 
 
@@ -700,7 +701,7 @@
 # ZCAT_COMMAND=zcat
 #
 # Or specify the full pathname:
-ZCAT_COMMAND=/usr/bin/zcat
+ZCAT_COMMAND=/bin/zcat
 
 #------------------------------------------------------------------------------
 # Compiling in support for embedded Perl: If you want to be able to
@@ -709,7 +710,7 @@
 # (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
 # Perl costs quite a lot of resources. Only do this if you really need it.
 
-# EXIM_PERL=perl.o
+EXIM_PERL=perl.o
 
 
 #------------------------------------------------------------------------------
@@ -719,7 +720,7 @@
 # that the local_scan API is made available by the linker. You may also need
 # to add -ldl to EXTRALIBS so that dlopen() is available to Exim.
 
-# EXPAND_DLFUNC=yes
+EXPAND_DLFUNC=yes
 
 
 #------------------------------------------------------------------------------
@@ -729,11 +730,12 @@
 # support, which is intended for use in conjunction with the SMTP AUTH
 # facilities, is included only when requested by the following setting:
 
-# SUPPORT_PAM=yes
+SUPPORT_PAM=yes
 
 # You probably need to add -lpam to EXTRALIBS, and in some releases of
 # GNU/Linux -ldl is also needed.
 
+EXTRALIBS=-lpam -ldl
 
 #------------------------------------------------------------------------------
 # Support for authentication via Radius is also available. The Exim support,
@@ -780,7 +782,7 @@
 # /var/pwcheck) and chown it to exim's user and group. Once you have installed
 # pwcheck, you should arrange for it to be started by root at boot time.
 
-# CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck
+CYRUS_PWCHECK_SOCKET=/var/lib/sasl/mux
 
 
 #------------------------------------------------------------------------------
@@ -797,7 +799,7 @@
 # group. Once you have installed saslauthd, you should arrange for it to be
 # started by root at boot time.
 
-# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
+CYRUS_SASLAUTHD_SOCKET=/var/lib/sasl2/mux
 
 
 #------------------------------------------------------------------------------
@@ -857,7 +859,7 @@
 # is "yes", as well as supporting line editing, a history of input lines in the
 # current run is maintained.
 
-# USE_READLINE=yes
+USE_READLINE=yes
 
 # You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes.
 # Note that this option adds to the size of the Exim binary, because the
@@ -932,7 +934,7 @@
 # period (for example, /usr/exim/configure.host.in.some.domain). If this file
 # does not exist, then the bare configuration file name is tried.
 
-# CONFIGURE_FILE_USE_NODE=yes
+CONFIGURE_FILE_USE_NODE=yes
 
 
 #------------------------------------------------------------------------------
@@ -1105,7 +1107,7 @@
 # be changed here. The default is 0640 so that information from the spool is
 # available to anyone who is a member of the Exim group.
 
-# SPOOL_MODE=0640
+SPOOL_MODE=0640
 
 
 #------------------------------------------------------------------------------
@@ -1164,6 +1166,6 @@
 # feature should only be used in very exceptional circumstances. YOU HAVE BEEN
 # WARNED.
 
-# ENABLE_DISABLE_FSYNC=yes
+ENABLE_DISABLE_FSYNC=yes
 
 # End of EDITME for Exim 4.