Changed files:
exim4-EDITME.patch -> 1.8
exim4-texinfo.patch -> 1.5
-diff -urN exim-4.24.org/src/EDITME exim-4.24/src/EDITME
---- exim-4.24.org/src/EDITME 2003-09-22 20:54:22.000000000 +0200
-+++ exim-4.24/src/EDITME 2003-09-22 20:56:04.000000000 +0200
+--- exim-4.30/src/EDITME.orig 2003-12-01 10:15:41.000000000 +0000
++++ exim-4.30/src/EDITME 2003-12-02 12:14:36.000000000 +0000
@@ -98,7 +98,7 @@
# /usr/local/sbin. The installation script will try to create this directory,
# and any superior directories, if they do not exist.
@@ -98,7 +98,7 @@
# /usr/local/sbin. The installation script will try to create this directory,
# and any superior directories, if they do not exist.
# In this case, Exim will use the first of them that exists when it is run.
@@ -132,7 +132,8 @@
# owner of a local mailbox.) Specifying these values as root is very strongly
# In this case, Exim will use the first of them that exists when it is run.
@@ -132,7 +132,8 @@
# owner of a local mailbox.) Specifying these values as root is very strongly
- # discouraged. These values are compiled into the binary.
-EXIM_USER=
+EXIM_UID=79
+EXIM_GID=79
-EXIM_USER=
+EXIM_UID=79
+EXIM_GID=79
- # If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must
- # also be a setting of EXIM_GROUP. If, on the other hand, you use a name
-@@ -213,7 +214,7 @@
+ # If you specify EXIM_USER as a name, this is looked up at build time, and the
+ # uid number is built into the binary. However, you can specify that this
+@@ -227,7 +228,7 @@
# This one is special-purpose, and commonly not required, so it is not
# included by default.
# This one is special-purpose, and commonly not required, so it is not
# included by default.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# MBX, is included only when requested. If you do not know what this is about,
# leave these settings commented out.
# MBX, is included only when requested. If you do not know what this is about,
# leave these settings commented out.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
LOOKUP_DBM=yes
LOOKUP_LSEARCH=yes
LOOKUP_DBM=yes
LOOKUP_LSEARCH=yes
+LOOKUP_PASSWD=yes
# LOOKUP_PGSQL=yes
# LOOKUP_WHOSON=yes
+LOOKUP_PASSWD=yes
# LOOKUP_PGSQL=yes
# LOOKUP_WHOSON=yes
--# LOOKUP_WILDLSEARCH=yes
--# LOOKUP_NWILDLSEARCH=yes
-+LOOKUP_WILDLSEARCH=yes
-+LOOKUP_NWILDLSEARCH=yes
-
- #------------------------------------------------------------------------------
-@@ -365,9 +366,9 @@
# included in the Exim binary. You will then need to set up the run time
# configuration to make use of the mechanism(s) selected.
# included in the Exim binary. You will then need to set up the run time
# configuration to make use of the mechanism(s) selected.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# leave these settings commented out.
# This setting is required for any TLS support (either OpenSSL or GnuTLS)
# leave these settings commented out.
# This setting is required for any TLS support (either OpenSSL or GnuTLS)
# Uncomment these settings if you are using GnuTLS
# USE_GNUTLS=yes
# Uncomment these settings if you are using GnuTLS
# USE_GNUTLS=yes
# Once you have done this, "make install" will build the info files and
# install them in the directory you have defined.
# Once you have done this, "make install" will build the info files and
# install them in the directory you have defined.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# %s. This will be replaced by one of the strings "main", "panic", or "reject"
# to form the final file names. Some installations may want something like this:
# %s. This will be replaced by one of the strings "main", "panic", or "reject"
# to form the final file names. Some installations may want something like this:
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
# files. Both the name of the command and the suffix that it adds to files
# need to be defined here. See also the EXICYCLOG_MAX configuration.
# files. Both the name of the command and the suffix that it adds to files
# need to be defined here. See also the EXICYCLOG_MAX configuration.
# If the exigrep utility is fed compressed log files, it tries to uncompress
# them using this command.
# If the exigrep utility is fed compressed log files, it tries to uncompress
# them using this command.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
# Perl costs quite a lot of resources. Only do this if you really need it.
# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
# Perl costs quite a lot of resources. Only do this if you really need it.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# support, which is intended for use in conjunction with the SMTP AUTH
# facilities, is included only when requested by the following setting:
# support, which is intended for use in conjunction with the SMTP AUTH
# facilities, is included only when requested by the following setting:
#------------------------------------------------------------------------------
# Support for authentication via Radius is also available. The Exim support,
#------------------------------------------------------------------------------
# Support for authentication via Radius is also available. The Exim support,
# /var/pwcheck) and chown it to exim's user and group. Once you have installed
# pwcheck, you should arrange for it to be started by root at boot time.
# /var/pwcheck) and chown it to exim's user and group. Once you have installed
# pwcheck, you should arrange for it to be started by root at boot time.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# group. Once you have installed saslauthd, you should arrange for it to be
# started by root at boot time.
# group. Once you have installed saslauthd, you should arrange for it to be
# started by root at boot time.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# period (for example, /usr/exim/configure.host.in.some.domain). If this file
# does not exist, then the bare configuration file name is tried.
# period (for example, /usr/exim/configure.host.in.some.domain). If this file
# does not exist, then the bare configuration file name is tried.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# (process id) to a file so that it can easily be identified. The path of the
# file can be specified here. Some installations may want something like this:
# (process id) to a file so that it can easily be identified. The path of the
# file can be specified here. Some installations may want something like this:
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
# using the name "exim-daemon.pid".
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
# using the name "exim-daemon.pid".
# be changed here. The default is 0640 so that information from the spool is
# available to anyone who is a member of the Exim group.
# be changed here. The default is 0640 so that information from the spool is
# available to anyone who is a member of the Exim group.
diff -urN exim-texinfo-4.00.org/doc/filter.texinfo exim-texinfo-4.00/doc/filter.texinfo
diff -urN exim-texinfo-4.00.org/doc/filter.texinfo exim-texinfo-4.00/doc/filter.texinfo
---- exim-texinfo-4.20.org/doc/filter.texinfo Sat Jun 30 01:12:24 2001
-+++ exim-texinfo-4.20/doc/filter.texinfo Sat Jun 30 01:12:53 2001
+--- exim-texinfo-4.30.org/doc/filter.texinfo Sat Jun 30 01:12:24 2001
++++ exim-texinfo-4.30/doc/filter.texinfo Sat Jun 30 01:12:53 2001
@@ -4,10 +4,19 @@
@set{wmAuthor_email} <ph10@@cus.cam.ac.uk>
@set{COPYRIGHT1} Copyright @copyright{} @value{wmYear} University of Cambridge
@@ -4,10 +4,19 @@
@set{wmAuthor_email} <ph10@@cus.cam.ac.uk>
@set{COPYRIGHT1} Copyright @copyright{} @value{wmYear} University of Cambridge
@titlepage
@title The Exim Mail Transfer Agent
diff -urN exim-texinfo-4.00.org/doc/spec.texinfo exim-texinfo-4.00/doc/spec.texinfo
@titlepage
@title The Exim Mail Transfer Agent
diff -urN exim-texinfo-4.00.org/doc/spec.texinfo exim-texinfo-4.00/doc/spec.texinfo
---- exim-texinfo-4.20.org/doc/spec.texinfo Sat Jun 30 01:12:24 2001
-+++ exim-texinfo-4.20/doc/spec.texinfo Sat Jun 30 01:12:54 2001
+--- exim-texinfo-4.30.org/doc/spec.texinfo Sat Jun 30 01:12:24 2001
++++ exim-texinfo-4.30/doc/spec.texinfo Sat Jun 30 01:12:54 2001
@@ -4,10 +4,19 @@
@set{wmAuthor_email} <ph10@@cus.cam.ac.uk>
@set{COPYRIGHT1} Copyright @copyright{} @value{wmYear} University of Cambridge
@@ -4,10 +4,19 @@
@set{wmAuthor_email} <ph10@@cus.cam.ac.uk>
@set{COPYRIGHT1} Copyright @copyright{} @value{wmYear} University of Cambridge
projects / packages / exim-lite.git / commitdiff