eagle-light.spec

   1
   2 # TODO:
   3 # - freeware.key should be in this same directory as eagle binary
   4 # - add libraries from homepage
   5 # - enhance description
   6
   7 %define         _ver    4.13r1
   8 Summary:        Eagle Layout Editor
   9 Summary(pl):    Edytor p³ytek drukowanych Eagle
  10 Name:           eagle-light
  11 Version:        4.13r1
  12 Release:        0.1
  13 License:        Freeware
  14 Group:          X11/Applications/Science
  15 Source0:        ftp://ftp.cadsoft.de/pub/program/%{_ver}/eagle-lin-eng-%{_ver}.tgz
  16 # Source0-md5:  c9607298d0c7ca1545397f996d14c1e8
  17 Source1:        %{name}.desktop
  18 URL:            http://www.cadsoft.de/freeware.htm/
  19 ExclusiveArch:  %{ix86}
  20 BuildRoot:      %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
  21
  22 %description
  23 Eagle Layout Editor. Limitations:
  24 - The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
  25 - Only two signal layers can be used (Top and Bottom).
  26 - The schematic editor can only create one sheet.
  27
  28 %description -l pl
  29 Edytor p³ytek drukowanych Eagle Limity:
  30 - Obszar p³ytki jest ograniczony do 100 x 80 mm (4 x 3.2 cale)
  31 - Tylko dwa sygna³owe warstwy mog± byæ u¿ywane (wierzchnia i spodnia)
  32 - Edytor schematów mo¿e stworzyæ jeden arkusz
  33 %prep
  34 %setup -q -n eagle-lin-eng-%{version}
  35
  36 %install
  37 rm -rf $RPM_BUILD_ROOT
  38 install -d $RPM_BUILD_ROOT%{_datadir}/%{name}/{bin,cam,lbr,projects/examples/{hexapod,singlesided,tutorial},scr,ulp} \
  39         $RPM_BUILD_ROOT%{_mandir}/man1 \
  40         $RPM_BUILD_ROOT%{_bindir} \
  41         $RPM_BUILD_ROOT%{_pixmapsdir} \
  42         $RPM_BUILD_ROOT%{_desktopdir}
  43 mv man/eagle.1 $RPM_BUILD_ROOT%{_mandir}/man1
  44 mv bin/eagle $RPM_BUILD_ROOT%{_bindir}/eagle
  45 mv bin/eagle.xpm $RPM_BUILD_ROOT%{_pixmapsdir}
  46 install %{SOURCE1} $RPM_BUILD_ROOT%{_desktopdir}
  47 install bin/* $RPM_BUILD_ROOT%{_datadir}/%{name}/bin
  48 install cam/* $RPM_BUILD_ROOT%{_datadir}/%{name}/cam
  49 install lbr/* $RPM_BUILD_ROOT%{_datadir}/%{name}/lbr
  50 install projects/DESCRIPTION $RPM_BUILD_ROOT%{_datadir}/%{name}/projects
  51 install projects/examples/hexapod/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/hexapod
  52 install projects/examples/singlesided/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/singlesided
  53 install projects/examples/tutorial/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/tutorial
  54 install scr/* $RPM_BUILD_ROOT%{_datadir}/%{name}/scr
  55 install ulp/* $RPM_BUILD_ROOT%{_datadir}/%{name}/ulp
  56
  57 %clean
  58 rm -rf $RPM_BUILD_ROOT
  59
  60 %post
  61 umask 022
  62 if ! grep -qs '^%{_libdir}/%{name}$' /etc/ld.so.conf ; then
  63         echo "%{_libdir}/%{name}" >> /etc/ld.so.conf
  64 fi
  65 /sbin/ldconfig
  66
  67 %postun
  68 umask 022
  69 if [ "$1" = '0' ]; then
  70         grep -v '^%{_libdir}/%{name}$' /etc/ld.so.conf > /etc/ld.so.conf.new 2>/dev/null
  71         mv -f /etc/ld.so.conf.new /etc/ld.so.conf
  72 fi
  73 /sbin/ldconfig
  74
  75 %files
  76 %defattr(644,root,root,755)
  77 %doc doc/UPDATE doc/library.txt README
  78 %attr(755,root,root) %{_bindir}/*
  79 %{_datadir}/