--- /dev/null
+--- ncurses-5.0/misc/terminfo.src.xtermchanges Fri Jun 2 17:51:22 2000
++++ ncurses-5.0/misc/terminfo.src Fri Jun 2 19:03:23 2000
+@@ -391,8 +391,8 @@
+
+ # This is better than klone+color, it doesn't assume white-on-black as the
+ # default color pair, but many `ANSI' terminals don't grok the <op> cap.
++# This is part of the definition, but not accepted: AX,
+ ecma+color|color control for ECMA-48-compatible terminals,
+- AX,
+ colors#8, ncv#3, pairs#64,
+ op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+@@ -2394,170 +2394,321 @@
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m,
+-# Compatible with the R5 xterm
+-# (from the XFree86 3.2 distribution, <blink=@> removed)
+-# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
+-# corrected typos in rs2 string - TD
+-# added u6-u9 -TD
+-xterm-r5|xterm R5 version,
+- OTbs, am, km, msgr, xenl,
+- cols#80, it#8, lines#24,
+- bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+- el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
+- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
+- kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
+- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
+- kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+- kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+- kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
+- rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
+- rmul=\E[m,
+- rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
+- sc=\E7,
+- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+- sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
+- smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+- u8=\E[?1;2c, u9=\E[c,
+-# Compatible with the R6 xterm
+-# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
+-# added khome/kend, hts based on the R6 xterm code - TD
+-# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
+-# for compatibility with other emulators).
+-xterm-r6|xterm-old|xterm X11R6 version,
+- OTbs, am, km, mir, msgr, xenl,
+- cols#80, it#8, lines#24,
+- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+- bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+- el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
+- il1=\E[L, ind=^J,
+- is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H,
+- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+- kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+- kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+- kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+- kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
+- rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+- rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+- rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
+- sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
+- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+- u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+-# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
+-# The name has been changed and some aliases have been removed.
+-xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
+- OTbs, am, bce, km, mir, msgr, xenl,
+- cols#80, it#8, lines#24, ncv@,
+- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+- bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+- ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+- flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+- ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+- il1=\E[L, ind=^J,
+- is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
+- ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq,
+- kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+- kdch1=\177, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
+- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+- kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
+- kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+- kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
+- kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
+- memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
+- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
+- rmso=\E[27m, rmul=\E[24m, rs1=^O,
+- rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
+- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
+- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+- tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+- vpa=\E[%i%p1%dd, use=ecma+color,
+-
+-# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
+-# codes for F1-F4 except while in VT220 mode.
+-xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
+- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
+-
+-# This version was released in XFree86 3.3.3 (November 1998).
+-# Besides providing printer support, it exploits a new feature that allows
+-# xterm to use terminfo-based descriptions with the titeInhibit resource.
+-# -- the distribution contained incorrect khome/kend values -TD
+-xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
+- mc5i,
+- blink=\E[5m, ich1@, invis=\E[8m,
+- is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
+- mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
+- rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
+- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+- smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
+-
+-# This beta version will probably be released in XFree86 4.0.
+-xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
+- npc,
+- kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
+- kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
+- ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
+- kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
+- kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
+- kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+- kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
+- kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
+- kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
+- kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
+- kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
+- kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
+- kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
+- kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
+- sgr=\E[0%?%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+- smcup=\E[?1049h, use=xterm-xf86-v333,
+-
+-xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.0 Window System),
+- use=xterm-xf86-v40,
+-
+-# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
+-xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
+- rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
+-
+-# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+-xterm-16color|xterm with 16 colors like aixterm,
+- colors#16, pairs#256,
+- setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+- setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+- setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+- setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+- use=xterm-xf86-v40,
+-
+-# These variants of XFree86 3.9.16 xterm are built as a configure option.
+-xterm-256color|xterm with 256 colors,
+- ccc,
+- colors#256, pairs#256,
+- initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+- setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm,
+- setb=\E[48;5;%p1%dm, setf=\E[38;5;%p1%dm,
+- use=xterm-xfree86,
+-xterm-88color|xterm with 88 colors,
+- colors#88, pairs#88, use=xterm-256color,
+-
+-# This is another variant, for XFree86 4.0 xterm (T.Dickey)
++# XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color)
++# - Thomas E. Dickey <dickey@clark.net>
++#
++# Special Capabilities:
++# --------------------
++# ich has a corresponding capability that inserts a single blank. We could
++# have used ich1=\E[@, which works with ncurses, but that is not standard
++# behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both
++# smir/rmir and ich1.
++# meml locks memory above the cursor; memu unlocks (ala HP terminals). This
++# is not recognized by some older (e.g., SVr3) tic programs, but none
++# do more than warn about it. Ignore the warning.
++# rmcup clears memory before switching to the alternate screen. The older
++# (deprecated) \E[?47h did not do this, requiring applications to
++# embed a \E[2J in the rmcup string. However, that behavior cannot
++# be disabled via titeInhibit, making that resource not function as
++# intended on systems with terminfo.
++# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We
++# use the shorter sequence for compatibility with the termcap, which
++# is trimmed to keep it shorter than 1023 characters. It (escape \E[!p)
++# replaces these in the conventional vt100 reset-string:
++# \E7 - save cursor (fixes origin-mode side-effect)
++# \E[r - reset scrolling margins
++# \E[m - reset SGR (including color)
++# \E[?7h - reset wraparound mode (DECAWM)
++# \E[?1l - reset application cursor keys (DECCKM)
++# \E[?6l - reset origin mode (DECOM)
++# \E8 - restore cursor
++# DECSTR is recognized by XFree86 xterm even in vt52 mode.
++#
++# Editing Keypad:
++# --------------
++# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or
++# higher. Otherwise it emulates a vt100 or vt52 depending on the value of the+ # resource. When emulating a vt220, we support the editing keypad. Sun and PC
++# keyboards have an editing keypad which is similar to the vt220:
++#
++# VT220 editing keypad
++# ----------------------------
++# Find Insert Remove
++# Select Prev Next
++# ----------------------------
++#
++# Sun/PC editing keypad
++# ----------------------------
++# Insert Home PageUp
++# Delete End PageDn
++# ----------------------------
++#
++# If the sunKeyboard resource is true, we map it this way (adjusting the values
++# of Home, End and Delete):
++# VT220 Sun/PC
++# ----------------------------
++# Find Home
++# Select End
++# Insert Insert
++# Remove Delete
++# Prev PageUp
++# Next PageDn
++# ----------------------------
++#
++# Note that all of the keys on the editing keypad transmit escape sequences.
++A
++# vt220 does this only when in vt220 mode; when emulating a vt100 the editing
++# keypad is inactive.
++#
++# Alternative keycodes:
++# --------------------
++# Several of the function keys have alternative names, depending on the type of
++# host which your xterm is connected to. DEC (i.e., the VMS system) uses F15
++# as the HELP key, F16 as the DO key. Unix applications generally do not do
++# this. Curses applications in particular, assign a unique keycode to each
++# capability string. These terminal descriptions do not have conflicting
++# definitions, to ensure that Unix curses applications use a consistent set of
++# keycodes. To get a VMS-bias, make these substitutions:
++# 1. change khome to kfnd
++# 2. change kend to kslt
++# Some legacy applications using the termcap emulation may expect kll where
++# we have specified kend.
++#
++xterm-xfree86|xterm-new|xterm terminal emulator (XFree86),
++ am,
++ bce,
++ km,
++ mc5i,
++ mir,
++ msgr,
++ xenl,
++ colors#8,
++ cols#80,
++ it#8,
++ lines#24,
++ pairs#64,
++ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
++ bel=^G,
++ blink=\E[5m,
++ bold=\E[1m,
++ cbt=\E[Z,
++ civis=\E[?25l,
++ clear=\E[H\E[2J,
++ cnorm=\E[?25h,
++ cr=^M,
++ csr=\E[%i%p1%d;%p2%dr,
++ cub=\E[%p1%dD,
++ cub1=^H,
++ cud=\E[%p1%dB,
++ cud1=^J,
++ cuf=\E[%p1%dC,
++ cuf1=\E[C,
++ cup=\E[%i%p1%d;%p2%dH,
++ cuu=\E[%p1%dA,
++ cuu1=\E[A,
++ cvvis=\E[?25h,
++ dch=\E[%p1%dP,
++ dch1=\E[P,
++ dl=\E[%p1%dM,
++ dl1=\E[M,
++ ech=\E[%p1%dX,
++ ed=\E[J,
++ el=\E[K,
++ el1=\E[1K,
++ enacs=\E(B\E)0,
++ flash=\E[?5h\E[?5l,
++ home=\E[H,
++ hpa=\E[%i%p1%dG,
++ ht=^I,
++ hts=\EH,
++ ich=\E[%p1%d@,
++ il=\E[%p1%dL,
++ il1=\E[L,
++ ind=^J,
++ invis=\E[8m,
++ is2=\E[!p\E[?3;4l\E[4l\E>,
++ ka1=\EOw,
++ ka3=\EOu,
++ kb2=\EOy,
++ kbeg=\EOE,
++ kbs=^H,
++ kc1=\EOq,
++ kc3=\EOs,
++ kcub1=\EOD,
++ kcud1=\EOB,
++ kcuf1=\EOC,
++ kcuu1=\EOA,
++ kdch1=\E[3~,
++ kend=\E[4~,
++ kent=\EOM,
++ kf1=\EOP,
++ kf10=\E[21~,
++ kf11=\E[23~,
++ kf12=\E[24~,
++ kf13=\E[25~,
++ kf14=\E[26~,
++ kf15=\E[28~,
++ kf16=\E[29~,
++ kf17=\E[31~,
++ kf18=\E[32~,
++ kf19=\E[33~,
++ kf2=\EOQ,
++ kf20=\E[34~,
++ kf3=\EOR,
++ kf4=\EOS,
++ kf5=\E[15~,
++ kf6=\E[17~,
++ kf7=\E[18~,
++ kf8=\E[19~,
++ kf9=\E[20~,
++ khome=\E[1~,
++ kich1=\E[2~,
++ kmous=\E[M,
++ knp=\E[6~,
++ kpp=\E[5~,
++ mc0=\E[i,
++ mc4=\E[4i,
++ mc5=\E[5i,
++ meml=\El,
++ memu=\Em,
++ op=\E[39;49m,
++ rc=\E8,
++ rev=\E[7m,
++ ri=\EM,
++ rmacs=^O,
++ rmam=\E[?7l,
++ rmcup=\E[?1047l\E[?1048l,
++ rmir=\E[4l,
++ rmkx=\E[?1l\E>,
++ rmso=\E[27m,
++ rmul=\E[24m,
++ rs1=\Ec,
++ rs2=\E[!p\E[?3;4l\E[4l\E>,
++ sc=\E7,
++ setab=\E[4%p1%dm,
++ setaf=\E[3%p1%dm,
++ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
++ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
++ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
++ sgr0=\E[m\017,
++ smacs=^N,
++ smam=\E[?7h,
++ smcup=\E[?1048h\E[?1047h,
++ smir=\E[4h,
++ smkx=\E[?1h\E=,
++ smso=\E[7m,
++ smul=\E[4m,
++ tbc=\E[3g,
++ u6=\E[%i%d;%dR,
++ u7=\E[6n,
++ u8=\E[?1;2c,
++ u9=\E[c,
++ vpa=\E[%i%p1%dd,
++# xterm-redhat is identical to xterm-xfree86 with the addition of a small
++# VT220-ism regarding the backspace and delete keys; this is mandated by
++# the keyboard configuration section of the Debian Policy Manual.
++xterm-redhat|Red Hat xterm (backspace and delete changed),
++ kbs=^H,
++ kdch1=\E[3~,
++ use=xterm-xfree86,
++
++#
++# The xterm-xfree86 description has all of the features, but is not completely+ # compatible with vt220. If you are using a Sun or PC keyboard, set the
++# sunKeyboard resource to true:
++# maps the editing keypad
++# interprets control-function-key as a second array of keys, so a
++# 12-fkey keyboard can support vt220's 20-fkeys.
++# maps numeric keypad "+" to ",".
++#
++xterm-vt220|XFree86 xterm emulating vt220,
++ kdch1=\E[3~,
++ kend=\E[4~,
++ khome=\E[1~,
++ use=xterm-xfree86,
++
++# Other variants:
++xterm-24|xterms|vs100|xterm terminal emulator (X Window System),
++ lines#24,
++ use=xterm,
++xterm-65|xterm with tall window 65x80 (X Window System),
++ lines#65,
++ use=xterm,
++xterm-bold|xterm with bold instead of underline (X Window System),
++ smso=\E[7m,
++ smul=\E[1m,
++ use=xterm,
++xterm-mono|monochrome xterm (X Window System),
++ colors@,
++ ncv@,
++ pairs@,
++ op@,
++ setab@,
++ setaf@,
++ setb@,
++ setf@,
++ sgr@,
++ use=xterm,
++#
++# This should work for the commonly used "color xterm" variations (XFree86
++# xterm, color_xterm, nxterm, rxvt):
++xterm-color|generic "ANSI" color xterm (X Window System),
++ colors#8,
++ ncv@,
++ pairs#64,
++ op=\E[m,
++ setab=\E[4%p1%dm,
++ setaf=\E[3%p1%dm,
++ use=xterm-r6,
++#
++xterm-boldso|xterm with bold for standout (X Window System),
++ rmso=\E[m,
++ smso=\E[1m,
++ use=xterm,
++#
++# vi may work better with this entry, because vi
++# doesn't use insert mode much
++xterm-ic|xterm-vi|xterm with insert character instead of insert mode,
++ mir@,
++ ich=\E[%p1%d@,
++ ich1=\E[@,
++ rmir@,
++ smir@,
++ use=xterm,
++#
++# This one also is primarily for testing ncurses; while the ISO 6429 defines
++# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support
++# it.
++xterm-rep|xterm with repeat-character control,
++ rep=%p1%c\E[%p2%{1}%-%db,
++ use=xterm,
++#
++# This is mainly for testing xterm; the real VT220 will not let you switch
++# character sets without first altering the keyboard language in the setup
++# screen. Some emulators allow this anyway. (Note that these strings are
++# normally used only for printers). The parameter to csnm and scs is the same+ # in both cases: the keyboard language parameter returned by CSI ? 2 6 n.
++xterm-nrc|xterm with VT220 national replacement character sets,
++ csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;,
++ scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;,
++ use=xterm,
++#
++# Foreground 0-15 maps (with toggles) into 30-37 & 90-97
++# Background 0-15 maps (with toggles) into 40-47 & 100-107
++#
++# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but+ # Stephen Marley persuaded me to allow the "ANSI" color controls to extend to
++# 16 colors. (Note that ncurses 4.2 uses setf/setb from this description;
++# however 5.0 selects either according to their availability). - T.Dickey
++#
++# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is
++# either for terminfo-level applications or via ncurses.
++xterm-16color|xterm with 16 colors,
++ colors#16,
++ ncv#32,
++ pairs#256,
++ setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
++ setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
++ setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
++ setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
++ use=xterm-xfree86,
++#
+ # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+ # To use it, your decTerminalID resource must be set to 200 or above.
+ #
+@@ -2566,102 +2717,339 @@
+ # SS3 \E O \217
+ # CSI \E [ \233
+ #
+-xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
+- OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl,
+- colors#8, cols#80, it#8, lines#24, pairs#64,
+- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+- bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
+- civis=\233?25l, clear=\233H\2332J, cnorm=\233?25h, cr=^M,
+- csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
+- cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
+- cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
+- dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+- ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
+- enacs=\E(B\E)0, flash=\233?5h$<100/>\233?5l,
+- home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210,
+- ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J,
+- invis=\2338m,
+- is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
+- ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
+- kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B,
+- kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
+- kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
+- kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
+- kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
+- kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
+- kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
+- kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
+- knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
+- meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
+- ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1049l,
+- rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
+- rs1=\Ec,
+- rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
+- sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
+- setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+- setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+- sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+- sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1049h,
+- smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m,
+- tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c,
+- u9=\E[c, vpa=\233%i%p1%dd,
+-
+-xterm-hp|XFree86 xterm with hpterm function keys,
+- kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+- kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
+- kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
+- knp=\ES, kpp=\ET, use=xterm-xfree86,
+-
+-xterm-vt220|XFree86 xterm emulating vt220,
+- ka1=\EOw, ka3=\EOy, kbeg=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
+- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+- kdch1=\E[3~, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
+- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+- kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
+- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+- khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+- use=xterm-xfree86,
+-
+-xterm-vt52|XFree86 xterm emulating dec vt52,
+- cols#80, it#8, lines#24,
+- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+- bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
+- cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
+- home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+- kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+-
+-xterm-noapp|xterm with cursor keys in normal mode,
+- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@,
+- rmkx=\E>, smcup@, smkx=\E=, use=xterm,
+-
+-xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
+- lines#24, use=xterm-r6,
+-
+-# This is xterm for ncurses.
+-xterm|xterm terminal emulator (X Window System),
+- use=xterm-r6,
+-# use=xterm-xfree86,
+-
+-# These entries allow access to the X titlebar and icon name as a status line.
+-# Note that twm (and possibly window managers descended from it such as tvtwm,
+-# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
+-# with it.
+-xterm+sl|access X title line and icon name,
+- hs,
+- wsl#40,
+- dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
+-xterm+sl-twm|access X title line (pacify twm-descended window managers),
+- hs,
+- wsl#40,
+- dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
+-
+-#
+-# The following xterm variants don't depend on your base version
+-#
+-# xterm with bold instead of underline
+-xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
+- smso=\E[7m, smul=\E[1m, use=xterm,
++xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System),
++ am,
++ bce,
++ km,
++ mc5i,
++ mir,
++ msgr,
++ xenl,
++ colors#8,
++ cols#80,
++ it#8,
++ lines#24,
++ pairs#64,
++ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
++ bel=^G,
++ blink=\2335m,
++ bold=\2331m,
++ cbt=\233Z,
++ civis=\233?25l,
++ clear=\233H\2332J,
++ cnorm=\233?25h,
++ cr=^M,
++ csr=\233%i%p1%d;%p2%dr,
++ cub=\233%p1%dD,
++ cub1=^H,
++ cud=\233%p1%dB,
++ cud1=^J,
++ cuf=\233%p1%dC,
++ cuf1=\233C,
++ cup=\233%i%p1%d;%p2%dH,
++ cuu=\233%p1%dA,
++ cuu1=\233A,
++ cvvis=\233?25h,
++ dch=\233%p1%dP,
++ dch1=\233P,
++ dl=\233%p1%dM,
++ dl1=\233M,
++ ech=\233%p1%dX,
++ ed=\233J,
++ el=\233K,
++ el1=\2331K,
++ enacs=\E(B\E)0,
++ flash=\233?5h\233?5l,
++ home=\233H,
++ hpa=\233%i%p1%dG,
++ ht=^I,
++ hts=\210,
++ hpa=\E[%i%p1%dG,
++ ich=\233%p1%d@,
++ il=\233%p1%dL,
++ il1=\233L,
++ ind=^J,
++ invis=\2338m,
++ is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
++ ka1=\217w,
++ ka3=\217u,
++ kb2=\217y,
++ kbeg=\217E,
++ kbs=^H,
++ kc1=\217q,
++ kc3=\217s,
++ kcub1=\217D,
++ kcud1=\217B,
++ kcuf1=\217C,
++ kcuu1=\217A,
++ kdch1=\2333~,
++ kend=\2334~,
++ kent=\217M,
++ kf1=\23311~,
++ kf10=\23321~,
++ kf11=\23323~,
++ kf12=\23324~,
++ kf13=\23325~,
++ kf14=\23326~,
++ kf15=\23328~,
++ kf16=\23329~,
++ kf17=\23331~,
++ kf18=\23332~,
++ kf19=\23333~,
++ kf2=\23312~,
++ kf20=\23334~,
++ kf3=\23313~,
++ kf4=\23314~,
++ kf5=\23315~,
++ kf6=\23317~,
++ kf7=\23318~,
++ kf8=\23319~,
++ kf9=\23320~,
++ khome=\2331~,
++ kich1=\2332~,
++ kmous=\233M,
++ knp=\2336~,
++ kpp=\2335~,
++ mc0=\233i,
++ mc4=\2334i,
++ mc5=\2335i,
++ meml=\El,
++ memu=\Em,
++ op=\23339;49m,
++ rc=\E8,
++ rev=\2337m,
++ ri=\215,
++ rmacs=^O,
++ rmam=\233?7l,
++ rmcup=\233?1047l\233?1048l,
++ rmir=\2334l,
++ rmkx=\233?1l\E>,
++ rmso=\23327m,
++ rmul=\23324m,
++ rs1=\Ec,
++ rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
++ sc=\E7,
++ setab=\2334%p1%dm,
++ setaf=\2333%p1%dm,
++ setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
++ setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
++ sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
++ sgr0=\233m^O,
++ smacs=^N,
++ smam=\233?7h,
++ smcup=\233?1048h\233?1047h,
++ smir=\2334h,
++ smkx=\233?1h\E=,
++ smso=\2337m,
++ smul=\2334m,
++ tbc=\2333g,
++ u6=\233[%i%d;%dR,
++ u7=\E[6n,
++ u8=\233[?1;2c,
++ u9=\E[c,
++ vpa=\233%i%p1%dd,
++#
++# Compatible with the R6 xterm, with the following changes:
++# added acsc (perhaps some versions of tic assume the standard vt100
++# alternate character set)
++# added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
++# added kmous string for ncurses.
++# added khome/kend strings.
++xterm-r6|xterm-old|xterm X11R6 version,
++ am,
++ km,
++ mir,
++ msgr,
++ xenl,
++ cols#80,
++ it#8,
++ lines#24,
++ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
++ bel=^G,
++ blink@,
++ bold=\E[1m,
++ clear=\E[H\E[2J,
++ cr=^M,
++ csr=\E[%i%p1%d;%p2%dr,
++ cub=\E[%p1%dD,
++ cub1=^H,
++ cud=\E[%p1%dB,
++ cud1=^J,
++ cuf=\E[%p1%dC,
++ cuf1=\E[C,
++ cup=\E[%i%p1%d;%p2%dH,
++ cuu=\E[%p1%dA,
++ cuu1=\E[A,
++ dch=\E[%p1%dP,
++ dch1=\E[P,
++ dl=\E[%p1%dM,
++ dl1=\E[M,
++ ed=\E[J,
++ el=\E[K,
++ enacs=\E)0,
++ home=\E[H,
++ hpa=\E[%i%p1%dG,
++ ht=^I,
++ il=\E[%p1%dL,
++ il1=\E[L,
++ ind=^J,
++ is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
++ kbs=^H,
++ kcub1=\EOD,
++ kcud1=\EOB,
++ kcuf1=\EOC,
++ kcuu1=\EOA,
++ kdch1=\E[3~,
++ kend=\E[4~,
++ kf1=\EOP,
++ kf10=\E[21~,
++ kf11=\E[23~,
++ kf12=\E[24~,
++ kf13=\E[25~,
++ kf14=\E[26~,
++ kf15=\E[28~,
++ kf16=\E[29~,
++ kf17=\E[31~,
++ kf18=\E[32~,
++ kf19=\E[33~,
++ kf2=\EOQ,
++ kf20=\E[34~,
++ kf3=\EOR,
++ kf4=\EOS,
++ kf5=\E[15~,
++ kf6=\E[17~,
++ kf7=\E[18~,
++ kf8=\E[19~,
++ kf9=\E[20~,
++ khome=\E[1~,
++ kich1=\E[2~,
++ kmous=\E[M,
++ knp=\E[6~,
++ kpp=\E[5~,
++ meml=\El,
++ memu=\Em,
++ rc=\E8,
++ rev=\E[7m,
++ ri=\EM,
++ rmacs=^O,
++ rmcup=\E[2J\E[?47l\E8,
++ rmir=\E[4l,
++ rmkx=\E[?1l\E>,
++ rmso=\E[m,
++ rmul=\E[m,
++ rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
++ sc=\E7,
++ sgr0=\E[m,
++ smacs=^N,
++ smcup=\E7\E[?47h,
++ smir=\E[4h,
++ smkx=\E[?1h\E=,
++ smso=\E[7m,
++ smul=\E[4m,
++ tbc=\E[3g,
++ u6=\E[%i%d;%dR,
++ u7=\E[6n,
++ u8=\E[?1;2c,
++ u9=\E[c,
++#
++# Compatible with the R5 xterm, with the following changes:
++# changed 'blink=@', to 'blink@' (the former meant that "@" would start
++# a blink, the latter that it is not supported).
++# changed kf1 through kf4 to correspond with actual usage. Though X
++# supports keypad symbols for PF1 to PF4, and xterm interprets these
++# correctly, the F1 to F4 codes are commonly (but incorrectly) used.
++# moved reset string from rs1 to rs2, to correlate better with termcap.
++# make khome consistent with other entries.
++# use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because
++# not everyone wants the alternate screen.
++xterm-r5|xterm R5 version,
++ am,
++ km,
++ msgr,
++ xenl,
++ cols#80,
++ it#8,
++ lines#24,
++ bel=^G,
++ blink@,
++ bold=\E[1m,
++ clear=\E[H\E[2J,
++ cr=^M,
++ csr=\E[%i%p1%d;%p2%dr,
++ cub=\E[%p1%dD,
++ cub1=^H,
++ cud=\E[%p1%dB,
++ cud1=^J,
++ cuf=\E[%p1%dC,
++ cuf1=\E[C,
++ cup=\E[%i%p1%d;%p2%dH,
++ cuu=\E[%p1%dA,
++ cuu1=\E[A,
++ dch=\E[%p1%dP,
++ dch1=\E[P,
++ dl=\E[%p1%dM,
++ dl1=\E[M,
++ ed=\E[J,
++ el=\E[K,
++ home=\E[H,
++ ht=^I,
++ hts=\EH,
++ ich=\E[%p1%d@,
++ ich1=\E[@,
++ il=\E[%p1%dL,
++ il1=\E[L,
++ ind=^J,
++ kbs=^H,
++ kcub1=\EOD,
++ kcud1=\EOB,
++ kcuf1=\EOC,
++ kcuu1=\EOA,
++ kdch1=\177,
++ kdl1=\E[31~,
++ kel=\E[8~,
++ kend=\E[4~,
++ kf0=\EOq,
++ kf1=\E[11~,
++ kf10=\E[21~,
++ kf11=\E[23~,
++ kf12=\E[24~,
++ kf2=\E[12~,
++ kf3=\E[13~,
++ kf4=\E[14~,
++ kf5=\E[15~,
++ kf6=\E[17~,
++ kf7=\E[18~,
++ kf8=\E[19~,
++ kf9=\E[20~,
++ khome=\E[1~,
++ kich1=\E[2~,
++ kil1=\E[30~,
++ knp=\E[6~,
++ kpp=\E[5~,
++ rc=\E8,
++ rev=\E[7m,
++ ri=\EM,
++ rmir=\E[4l,
++ rmkx=\E[?1l\E>,
++ rmso=\E[m,
++ rmul=\E[m,
++ rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
++ sc=\E7,
++ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
++ sgr0=\E[m,
++ smir=\E[4h,
++ smkx=\E[?1h\E=,
++ smso=\E[7m,
++ smul=\E[4m,
++ tbc=\E[3g,
++#
++# This is the only entry which you should have to customize, since "xterm"
++# is widely used for a variety of incompatible terminal emulations including
++# color_xterm and rxvt.
++xterm|X11 terminal emulator,
++ use=xterm-r6,
++# use=xterm-xfree86,
++# use=xterm-redhat,
+ # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
+ # (kterm should not invoke DEC Graphics as the alternate character set
+ # -- Kenji Rikitake)
+@@ -2710,18 +3096,6 @@
+ smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, use=ecma+color,
+
+-# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
+-# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
+-# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
+-# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
+-# that each of those implements the home, end, delete keys differently.
+-#
+-# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
+-# colors; note that this is not compatible with the 5.2 version.
+-nxterm|xterm-color|generic color xterm,
+- ncv@,
+- op=\E[m, use=xterm-r6, use=klone+color,
+-
+ # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
+ gnome|Gnome terminal,
+ bce,
+@@ -2823,15 +3197,6 @@
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ use=xtermm,
+
+-# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
+-# Here's a termcap entry I've been using for xterm_color, which comes
+-# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
+-# color stuff, I also have a status line defined as the window manager
+-# title bar. [I have translated it to terminfo -- ESR]
+-xterm-pcolor|xterm with color used for highlights and status line,
+- bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
+- smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
+-
+ # HP ships this, except for the pb#9600 which was merged in from BSD termcap.
+ # (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
+ hpterm|X-hpterm|hp X11 terminal emulator,
+@@ -2986,8 +3351,9 @@
+ # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
+ # AX (bool) Does understand ANSI set default fg/bg color
+ # (\E[39m / \E[49m).
++# G0 is part of the screen definition, but unknown.
+ screen|VT 100/ANSI X3.64 virtual terminal,
+- OTbs, OTpt, am, km, mir, msgr, xenl, G0,
++ OTbs, OTpt, am, km, mir, msgr, xenl,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
projects / packages / compat-ncurses5.git / commitdiff