- initial release based on Stephan Linz <linz@li-pro.net> spec

Changed files:
    cisp.spec -> 1.1

diff --git a/cisp.spec b/cisp.spec
new file mode 100644 (file)
index 0000000..2730ada
--- /dev/null
+++ b/cisp.spec
@@ -0,0 +1,58 @@
+
+Summary:       Compact In-System Programmer
+Name:          cisp
+Version:       1.0.4
+Release:       0.1
+License:       GPL
+URL:           http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/
+Group:         Development/Tools
+Source0:       http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/firmware/%{name}-%{version}.tar.gz
+# Source0-md5: 60ec135286b551a4ea27c5d5e7d6b90f
+BuildRoot:     %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+
+%description
+CISP is a special compact In-System Programmer for the C2N232 project
+by Marko Mäkelä. CISP transfers data to and from the non-volatile
+program or data memory of an Atmel AVR RISC processor over the Serial
+Peripheral Interface (SPI).
+
+Nevertheless you could use this programmer software together with
+following hardware components:
+
+    - c2n232 serial (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
+    - dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
+    - ponyprog serial (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
+    - dapa parallel (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
+    - dt006 parallel (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
+    - stk200 Atmel STK200 Evaluation Board (parallel)
+
+%prep
+%setup -q
+
+%build
+%{__make} -f Makefile.unixpc           \
+       CFLAGS="%{rpmcflags}"           \
+       CXXFLAGS="%{rpmcflags}"         \
+       CC="%{__cc}"                    \
+       CXX="%{__cxx}"                  \
+       PREFIX=%{_prefix}               \
+       BINDIR=%{_bindir}               \
+       MANDIR=%{_mandir}/man1  \
+       all cisp.dvi
+
+%install
+rm -rf $RPM_BUILD_ROOT
+%{__make}      -f Makefile.unixpc                              \
+       PREFIX=$RPM_BUILD_ROOT%{_prefix}                        \
+       BINDIR=$RPM_BUILD_ROOT%{_bindir}                \
+       MANDIR=$RPM_BUILD_ROOT%{_mandir}/man1   \
+       install installman
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(644,root,root,755)
+%doc ChangeLog
+%attr(755,root,root) %{_bindir}/*
+%{_mandir}/man1/*