diff -urN cdrtools-1.11.orig/README.ATAPI cdrtools-1.11/README.ATAPI
---- cdrtools-1.11.orig/README.ATAPI Sun Nov 25 12:37:30 2001
-+++ cdrtools-1.11/README.ATAPI Wed Apr 24 19:56:35 2002
-@@ -406,14 +406,14 @@
+--- cdrtools-1.11.orig/README.ATAPI Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/README.ATAPI Wed Nov 27 13:12:13 2002
+@@ -464,14 +464,14 @@
ln -s scd1 cdrw # NOTE: see above, maybe cdrom
Check the new SCSI settings:
cdrecord -scanbus
/*--------------------------------------------------------------------------*/
He had constant buffer underrun problems:
diff -urN cdrtools-1.11.orig/README.linux cdrtools-1.11/README.linux
---- cdrtools-1.11.orig/README.linux Sun Apr 1 12:08:41 2001
-+++ cdrtools-1.11/README.linux Wed Apr 24 19:56:06 2002
+--- cdrtools-1.11.orig/README.linux Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/README.linux Wed Nov 27 13:12:35 2002
@@ -169,7 +169,7 @@
If dev=0,0,0 does not work but -dev=0,0,0 works you found this
incompatibility. This problem is caused by an incompatibility
You cannot copy binaries between different Linux versions,
always compile the sources by yourself.
diff -urN cdrtools-1.11.orig/README.openserver cdrtools-1.11/README.openserver
---- cdrtools-1.11.orig/README.openserver Tue Jan 25 17:37:48 2000
-+++ cdrtools-1.11/README.openserver Wed Apr 24 19:56:49 2002
+--- cdrtools-1.11.orig/README.openserver Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/README.openserver Wed Nov 27 13:13:13 2002
@@ -55,7 +55,7 @@
===================================================================
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
Running cdrecord with the old address method will result in an error!
diff -urN cdrtools-1.11.orig/README.unixware cdrtools-1.11/README.unixware
---- cdrtools-1.11.orig/README.unixware Sun Mar 4 00:41:43 2001
-+++ cdrtools-1.11/README.unixware Wed Apr 24 19:57:01 2002
+--- cdrtools-1.11.orig/README.unixware Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/README.unixware Wed Nov 27 13:13:25 2002
@@ -64,7 +64,7 @@
===================================================================
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
Running cdrecord with the old address method will result in an error!
diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.1 cdrtools-1.11/cdrecord/cdrecord.1
---- cdrtools-1.11.orig/cdrecord/cdrecord.1 Sat Feb 23 21:21:12 2002
-+++ cdrtools-1.11/cdrecord/cdrecord.1 Wed Apr 24 19:59:30 2002
-@@ -134,7 +134,7 @@
+--- cdrtools-1.11.orig/cdrecord/cdrecord.1 Wed Nov 27 12:59:44 2002
++++ cdrtools-1.11/cdrecord/cdrecord.1 Wed Nov 27 13:15:14 2002
+@@ -146,7 +146,7 @@
described below.
.PP
.B dev=
option may also be a drive name label in said file (see FILES section).
-@@ -522,7 +522,7 @@
+@@ -621,7 +621,7 @@
.B dev=
option does not contain the characters ',', '/', '@' or ':',
it is interpreted as an label name that may be found in the file
-/etc/default/cdrecord (see FILES section).
+/etc/cdrecord.conf (see FILES section).
.TP
- .BI timeout= #
- Set the default SCSI command timeout value to
-@@ -1145,7 +1145,7 @@
+ .BI gracetime= #
+ Set the grace time before starting to write to
+@@ -1357,7 +1357,7 @@
.TP
- CDR_DEVICE
+ .B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
-call of the SCSI transport library or a label in the file /etc/default/cdrecord.
+call of the SCSI transport library or a label in the file /etc/cdrecord.conf
.TP
- CDR_SPEED
+ .B CDR_SPEED
Sets the default speed value for writing (see also
-@@ -1159,8 +1159,8 @@
+@@ -1413,8 +1413,8 @@
.SH FILES
.TP
For example:
.SM CDR_FIFOSIZE=8m
or
-@@ -1169,7 +1169,7 @@
+@@ -1423,7 +1423,7 @@
.TP
CDR_DEVICE
This may either hold a device identifier that is suitable to the open
-call of the SCSI transport library or a label in the file /etc/default/cdrecord
-+call of the SCSI transport library or a label in the file /etc/cdrecord.conf
++call of the SCSI transport library or a label in the file /etc/cdrecord.conf
that allows to identify a specific drive on the system.
.TP
CDR_SPEED
diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.dfl cdrtools-1.11/cdrecord/cdrecord.dfl
---- cdrtools-1.11.orig/cdrecord/cdrecord.dfl Fri Jun 1 06:55:12 2001
-+++ cdrtools-1.11/cdrecord/cdrecord.dfl Wed Apr 24 20:00:44 2002
+--- cdrtools-1.11.orig/cdrecord/cdrecord.dfl Wed Nov 27 12:59:44 2002
++++ cdrtools-1.11/cdrecord/cdrecord.dfl Wed Nov 27 13:16:20 2002
@@ -1,6 +1,6 @@
- #ident @(#)cdrecord.dfl 1.3 01/06/01 Copyr 1998 J. Schilling
+ #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
#
-# This file is /etc/default/cdrecord
+# This file is /etc/cdrecord.conf
# It contains defaults that are used if no command line option
# or environment is present.
#
+@@ -14,7 +14,7 @@
+ # Note that newer cdrecord versions do not default
+ # to speed=1. For MMC compliant drives, the default
+ # is to write at maximum speed, so it in general does
+-# not make sense to set up a default speed in /etc/default/cdrecord
++# not make sense to set up a default speed in /etc/cdrecord.conf
+ #
+ #CDR_SPEED=40
+
diff -urN cdrtools-1.11.orig/cdrecord/defaults.c cdrtools-1.11/cdrecord/defaults.c
---- cdrtools-1.11.orig/cdrecord/defaults.c Tue Mar 5 23:34:47 2002
-+++ cdrtools-1.11/cdrecord/defaults.c Wed Apr 24 19:57:27 2002
+--- cdrtools-1.11.orig/cdrecord/defaults.c Wed Nov 27 12:59:44 2002
++++ cdrtools-1.11/cdrecord/defaults.c Wed Nov 27 13:16:57 2002
@@ -53,7 +53,7 @@
* don't contribute work and don't give support, they are causing extra
* work for me and this way slow down the cdrecord development.
EXPORT void
diff -urN cdrtools-1.11.orig/doc/cdrecord.man cdrtools-1.11/doc/cdrecord.man
---- cdrtools-1.11.orig/doc/cdrecord.man Tue Apr 17 00:02:12 2001
-+++ cdrtools-1.11/doc/cdrecord.man Wed Apr 24 20:03:32 2002
-@@ -71,7 +71,7 @@
-
-
-
-- If a file /etc/default/cdrecord exists, the parameter to the
-+ If a file /etc/cdrecord.conf exists, the parameter to the
- d\bd\bd\bde\be\be\bev\bv\bv\bv=\b=\b=\b= option may also be a drive name label in said file (see
- FILES section).
-
-@@ -386,7 +386,7 @@
- If the argument to the d\bd\bd\bde\be\be\bev\bv\bv\bv=\b=\b=\b= option does not contain the
- characters ',', '/', '@' or ':', it is interpreted as
- an label name that may be found in the file
-- /etc/default/cdrecord (see FILES section).
-+ /etc/cdrecord.conf (see FILES section).
-
+--- cdrtools-1.11.orig/doc/cdrecord.man Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/doc/cdrecord.man Wed Nov 27 13:18:06 2002
+@@ -67,7 +67,7 @@
+ try the -\b-s\bsc\bca\ban\bnb\bbu\bus\bs option of c\bcd\bdr\bre\bec\bco\bor\brd\bd described below.
-@@ -930,7 +930,7 @@
+- If a file /etc/default/cdrecord exists, the parameter to
++ If a file /etc/cdrecord.conf exists, the parameter to
+ the d\bde\bev\bv=\b= option may also be a drive name label in said
+ file (see FILES section).
+@@ -438,7 +438,7 @@
+ If the argument to the d\bde\bev\bv=\b= option does not contain
+ the characters ',', '/', '@' or ':', it is inter-
+ preted as an label name that may be found in the
+- file /etc/default/cdrecord (see FILES section).
++ file /etc/cdrecord.man (see FILES section).
- suitable to the open call of the SCSI transport library
-- or a label in the file /etc/default/cdrecord.
-+ or a label in the file /etc/cdrecord.conf
+ g\bgr\bra\bac\bce\bet\bti\bim\bme\be=\b=_\b#
+ Set the grace time before starting to write to _\b#
+@@ -1053,7 +1053,7 @@
+ This may either hold a device identifier that is
+ suitable to the open call of the SCSI transport
+ library or a label in the file
+- /etc/default/cdrecord.
++ /etc/cdrecord.conf
- CDR_SPEED
- Sets the default speed value for writing (see also -\b-\b-\b-
-@@ -942,16 +942,16 @@
+ C\bCD\bDR\bR_\b_S\bSP\bPE\bEE\bED\bD
+ Sets the default speed value for writing (see also
+@@ -1092,16 +1092,16 @@
- F\bF\bF\bFI\bI\bI\bIL\bL\bL\bLE\bE\bE\bES\bS\bS\bS
-- /etc/default/cdrecord
-+ /etc/cdrecord.conf
- Default values can be set for the following options in
-- /etc/default/cdrecord. For example: CDR_FIFOSIZE=8m
-+ /etc/cdrecord.conf For example: CDR_FIFOSIZE=8m
- or CDR_SPEED=2
+ F\bFI\bIL\bLE\bES\bS
+- /etc/default/cdrecord
++ /etc/cdrecord.conf
+ Default values can be set for the following options
+- in /etc/default/cdrecord. For example: CDR_FIFOS-
++ in /etc/cdrecord.conf For example: CDR_FIFOS-
+ IZE=8m or CDR_SPEED=2
- CDR_DEVICE
- This may either hold a device identifier that is
- suitable to the open call of the SCSI transport
- library or a label in the file
-- /etc/default/cdrecord that allows to identify a
-+ /etc/cdrecord.conf that allows to identify a
- specific drive on the system.
+ CDR_DEVICE
+ This may either hold a device identifier
+ that is suitable to the open call of the
+ SCSI transport library or a label in the
+- file /etc/default/cdrecord that allows to
++ file /etc/cdrecord.conf that allows to
+ identify a specific drive on the system.
- CDR_SPEED
+ CDR_SPEED
diff -urN cdrtools-1.11.orig/doc/cdrecord.ps cdrtools-1.11/doc/cdrecord.ps
---- cdrtools-1.11.orig/doc/cdrecord.ps Tue Apr 17 00:01:51 2001
-+++ cdrtools-1.11/doc/cdrecord.ps Wed Apr 24 20:04:39 2002
-@@ -509,7 +509,7 @@
- (cdrecord)1485 4848 w
- 10 R f
- (described below.)1 684 1 1900 4848 t
--(If a \256le /etc/default/cdrecord exists, the parameter to the)8 2324 1 1080 5136 t
-+(If a \256le /etc/cdrecord.conf exists, the parameter to the)8 2324 1 1080 5136 t
- 10 B f
- (dev=)3440 5136 w
- 10 R f
-@@ -1135,7 +1135,7 @@
- (@)4556 4728 w
- 10 R f
- ( it is inter-)3 447(' or ':',)2 305 2 4648 4728 t
--(preted as an label name that may be found in the \256le /etc/default/cdrecord \(see FILES section\).)15 3901 1 1440 4848 t
-+(preted as an label name that may be found in the \256le /etc/cdrecord.conf \(see FILES section\).)15 3901 1 1440 4848 t
- 10 B f
- (timeout=)1080 5016 w
- 10 S1 f
-@@ -2205,7 +2205,7 @@
- 10 R f
- (DEVICE)1336 3840 w
- ( call of the SCSI transport)5 1126(This may either hold a device identi\256er that is suitable to the open)12 2834 2 1440 3960 t
--(library or a label in the \256le /etc/default/cdrecord.)7 1996 1 1440 4080 t
-+(library or a label in the \256le /etc/cdrecord.conf)7 1996 1 1440 4080 t
- (CDR)1080 4248 w
- 10 S f
- (_)1286 4248 w
-@@ -2233,8 +2233,8 @@
- 9 B f
- (FILES)720 4944 w
- 10 R f
--(/etc/default/cdrecord)1080 5064 w
--( example:)1 423( For)1 229( /etc/default/cdrecord.)1 907(Default values can be set for the following options in)9 2401 4 1440 5184 t
-+(/etc/cdrecord.conf)1080 5064 w
-+( example:)1 423( For)1 229( /etc/cdrecord.conf)1 907(Default values can be set for the following options in)9 2401 4 1440 5184 t
- 9 R f
- (CDR)1440 5304 w
- 9 S f
-@@ -2256,7 +2256,7 @@
- 10 R f
- (DEVICE)1696 5472 w
- ( is suitable to the open call of the SCSI)9 1729(This may either hold a device identi\256er that)7 1871 2 1800 5592 t
--( identify a)2 455(transport library or a label in the \256le /etc/default/cdrecord that allows to)11 3145 2 1800 5712 t
-+( identify a)2 455(transport library or a label in the \256le /etc/cdrecord.conf that allows to)11 3145 2 1800 5712 t
- (speci\256c drive on the system.)4 1167 1 1800 5832 t
- (CDR)1440 6000 w
- 10 S f
+--- cdrtools-1.11.orig/doc/cdrecord.ps Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/doc/cdrecord.ps Wed Nov 27 13:31:20 2002
+@@ -290,7 +290,7 @@
+ (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
+ (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
+ Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114
+-(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115
++(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115
+ (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115
+ (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115
+ (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On)
+@@ -749,8 +749,8 @@
+ 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
+ (option does not contain the characters ',)3.547 F 1.047
+ (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
+-(preted as an label name that may be found in the \214le /etc/def)144
+-568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108
++(preted as an label name that may be found in the \214le /etc/cdr)144
++568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108
+ 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
+ 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
+ -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
+@@ -1425,7 +1425,7 @@
+ /F3 10/Times-Bold@0 SF(CDR_DEVICE)108 297.6 Q F0 1.627
+ (This may either hold a de)144 309.6 R 1.628(vice identi\214er that is \
+ suitable to the open call of the SCSI transport)-.25 F
+-(library or a label in the \214le /etc/def)144 321.6 Q(ault/cdrecord.)
++(library or a label in the \214le /etc/cdr)144 321.6 Q(ecord.conf)
+ -.1 E F3(CDR_SPEED)108 338.4 Q F0(Sets the def)144 350.4 Q(ault speed v)
+ -.1 E(alue for writing \(see also)-.25 E F3(\255speed)2.5 E F0
+ (option\).)2.5 E F3(CDR_FIFOSIZE)108 367.2 Q F0(Sets the def)144 379.2 Q
+@@ -1460,16 +1460,16 @@
+ (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
+ l be ignored if you log in using an account that has been created with \
+ a remote)144 561.6 R(SCSI serv)144 573.6 Q(er program as login shell.)
+--.15 E F2(FILES)72 602.4 Q F0(/etc/def)108 614.4 Q(ault/cdrecord)-.1 E
++-.15 E F2(FILES)72 602.4 Q F0(/etc/cdr)108 614.4 Q(ecord.conf)-.1 E
+ (Def)144 626.4 Q 3.227(ault v)-.1 F 3.227
+-(alues can be set for the follo)-.25 F 3.228(wing options in /etc/def)
+--.25 F 5.728(ault/cdrecord. F)-.1 F 3.228(or e)-.15 F(xample:)-.15 E/F4
++(alues can be set for the follo)-.25 F 3.228(wing options in /etc/cdr)
++-.25 F 5.728(ecord.conf F)-.1 F 3.228(or e)-.15 F(xample:)-.15 E/F4
+ 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 638.4 Q F0(or)2.25 E F4
+ (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 655.2 Q .262
+ (This may either hold a de)180 667.2 R .262
+ (vice identi\214er that is suitable to the open call of the SCSI trans-)
+--.25 F 1.418(port library or a label in the \214le /etc/def)180 679.2 R
+-1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
++-.25 F 1.418(port library or a label in the \214le /etc/cdr)180 679.2 R
++1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
+ -.25 F(dri)180 691.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
+ E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 143.345
+ (chilling V)-2.5 F(ersion 1.11a35)-1.11 E(12)191.505 E EP
diff -urN cdrtools-1.11.orig/doc/readcd.man cdrtools-1.11/doc/readcd.man
---- cdrtools-1.11.orig/doc/readcd.man Tue Apr 17 00:02:45 2001
-+++ cdrtools-1.11/doc/readcd.man Wed Apr 24 20:04:47 2002
-@@ -102,7 +102,7 @@
- If the argument to the d\bd\bd\bde\be\be\bev\bv\bv\bv=\b=\b=\b= option does not contain the
- characters ',', '/', '@' or ':', it is interpreted as
- an label name that may be found in the file
-- /etc/default/cdrecord (see FILES section).
-+ /etc/cdrecord.conf (see FILES section).
+--- cdrtools-1.11.orig/doc/readcd.man Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/doc/readcd.man Wed Nov 27 13:21:04 2002
+@@ -96,7 +96,7 @@
+ If the argument to the d\bde\bev\bv=\b= option does not contain
+ the characters ',', '/', '@' or ':', it is inter-
+ preted as an label name that may be found in the
+- file /etc/default/cdrecord (see FILES section).
++ file /etc/cdrecord.conf (see FILES section).
- t\bt\bt\bti\bi\bi\bim\bm\bm\bme\be\be\beo\bo\bo\bou\bu\bu\but\bt\bt\bt=\b=\b=\b=#
- Set the default SCSI command timeout value to #
+ t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
+ Set the default SCSI command timeout value to _\b#
diff -urN cdrtools-1.11.orig/doc/readcd.ps cdrtools-1.11/doc/readcd.ps
---- cdrtools-1.11.orig/doc/readcd.ps Tue Apr 17 00:03:09 2001
-+++ cdrtools-1.11/doc/readcd.ps Wed Apr 24 20:04:58 2002
-@@ -596,7 +596,7 @@
- (@)4556 960 w
- 10 R f
- ( it is inter-)3 447(' or ':',)2 305 2 4648 960 t
--(preted as an label name that may be found in the \256le /etc/default/cdrecord \(see FILES section\).)15 3901 1 1440 1080 t
-+(preted as an label name that may be found in the \256le /etc/cdrecord.conf \(see FILES section\).)15 3901 1 1440 1080 t
- 10 B f
- (timeout=)1080 1248 w
- 10 S1 f
+--- cdrtools-1.11.orig/doc/readcd.ps Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/doc/readcd.ps Wed Nov 27 13:29:04 2002
+@@ -330,8 +330,8 @@
+ 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
+ (option does not contain the characters ',)3.547 F 1.047
+ (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
+-(preted as an label name that may be found in the \214le /etc/def)144
+-132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
++(preted as an label name that may be found in the \214le /etc/cdr)144
++132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
+ F1(#).48 E F0 .13(Set the def)144 160.8 R .13
+ (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
+ 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
diff -urN cdrtools-1.11.orig/doc/scgcheck.man cdrtools-1.11/doc/scgcheck.man
---- cdrtools-1.11.orig/doc/scgcheck.man Fri Apr 13 20:16:03 2001
-+++ cdrtools-1.11/doc/scgcheck.man Wed Apr 24 20:05:06 2002
-@@ -102,7 +102,7 @@
- If the argument to the d\bd\bd\bde\be\be\bev\bv\bv\bv=\b=\b=\b= option does not contain the
- characters ',', '/', '@' or ':', it is interpreted as
- an label name that may be found in the file
-- /etc/default/cdrecord (see FILES section).
-+ /etc/cdrecord.conf (see FILES section).
+--- cdrtools-1.11.orig/doc/scgcheck.man Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/doc/scgcheck.man Wed Nov 27 13:21:18 2002
+@@ -90,7 +90,7 @@
+ If the argument to the d\bde\bev\bv=\b= option does not contain
+ the characters ',', '/', '@' or ':', it is inter-
+ preted as an label name that may be found in the
+- file /etc/default/cdrecord (see FILES section).
++ file /etc/cdrecord.conf (see FILES section).
- t\bt\bt\bti\bi\bi\bim\bm\bm\bme\be\be\beo\bo\bo\bou\bu\bu\but\bt\bt\bt=\b=\b=\b=#
- Set the default SCSI command timeout value to #
+ t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
+ Set the default SCSI command timeout value to _\b#
diff -urN cdrtools-1.11.orig/doc/scgcheck.ps cdrtools-1.11/doc/scgcheck.ps
---- cdrtools-1.11.orig/doc/scgcheck.ps Fri Apr 13 20:17:07 2001
-+++ cdrtools-1.11/doc/scgcheck.ps Wed Apr 24 20:05:17 2002
-@@ -585,7 +585,7 @@
- (@)4556 1320 w
- 10 R f
- ( it is inter-)3 447(' or ':',)2 305 2 4648 1320 t
--(preted as an label name that may be found in the \256le /etc/default/cdrecord \(see FILES section\).)15 3901 1 1440 1440 t
-+(preted as an label name that may be found in the \256le /etc/cdrecord.conf \(see FILES section\).)15 3901 1 1440 1440 t
- 10 B f
- (timeout=)1080 1608 w
- 10 S1 f
+--- cdrtools-1.11.orig/doc/scgcheck.ps Wed Nov 27 12:59:43 2002
++++ cdrtools-1.11/doc/scgcheck.ps Wed Nov 27 13:31:49 2002
+@@ -317,8 +317,8 @@
+ 1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
+ 1.047(option does not contain the characters ',)3.547 F 1.047
+ (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
+-(preted as an label name that may be found in the \214le /etc/def)144 96
+-Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
++(preted as an label name that may be found in the \214le /etc/cdr)144 96
++Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
+ 10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
+ (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
+ 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
diff -urN cdrtools-1.11.orig/readcd/readcd.1 cdrtools-1.11/readcd/readcd.1
---- cdrtools-1.11.orig/readcd/readcd.1 Fri Jan 18 12:38:58 2002
-+++ cdrtools-1.11/readcd/readcd.1 Wed Apr 24 19:57:16 2002
-@@ -175,7 +175,7 @@
+--- cdrtools-1.11.orig/readcd/readcd.1 Wed Nov 27 12:59:44 2002
++++ cdrtools-1.11/readcd/readcd.1 Wed Nov 27 13:22:11 2002
+@@ -186,7 +186,7 @@
.B dev=
option does not contain the characters ',', '/', '@' or ':',
it is interpreted as an label name that may be found in the file
.BI timeout= #
Set the default SCSI command timeout value to
diff -urN cdrtools-1.11.orig/scgcheck/scgcheck.1 cdrtools-1.11/scgcheck/scgcheck.1
---- cdrtools-1.11.orig/scgcheck/scgcheck.1 Mon Apr 16 23:58:25 2001
-+++ cdrtools-1.11/scgcheck/scgcheck.1 Wed Apr 24 19:58:28 2002
+--- cdrtools-1.11.orig/scgcheck/scgcheck.1 Wed Nov 27 12:59:44 2002
++++ cdrtools-1.11/scgcheck/scgcheck.1 Wed Nov 27 13:22:46 2002
@@ -170,7 +170,7 @@
.B dev=
option does not contain the characters ',', '/', '@' or ':',