-diff -urN cdrtools-1.11.orig/README.ATAPI cdrtools-1.11/README.ATAPI
---- cdrtools-1.11.orig/README.ATAPI Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/README.ATAPI Wed Nov 27 13:12:13 2002
-@@ -464,14 +464,14 @@
+diff -ruN cdrtools-2.0-/README.ATAPI cdrtools-2.0/README.ATAPI
+--- cdrtools-2.0-/README.ATAPI Tue Dec 24 17:37:35 2002
++++ cdrtools-2.0/README.ATAPI Thu Dec 26 18:25:53 2002
+@@ -462,14 +462,14 @@
ln -s scd1 cdrw # NOTE: see above, maybe cdrom
Check the new SCSI settings:
cdrecord -scanbus
9. It's done! Insert a CD and try "cdrecord -v -toc"
/*--------------------------------------------------------------------------*/
He had constant buffer underrun problems:
-diff -urN cdrtools-1.11.orig/README.linux cdrtools-1.11/README.linux
---- cdrtools-1.11.orig/README.linux Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/README.linux Wed Nov 27 13:12:35 2002
+diff -ruN cdrtools-2.0-/README.linux cdrtools-2.0/README.linux
+--- cdrtools-2.0-/README.linux Sun Apr 1 12:08:41 2001
++++ cdrtools-2.0/README.linux Thu Dec 26 18:25:53 2002
@@ -169,7 +169,7 @@
If dev=0,0,0 does not work but -dev=0,0,0 works you found this
incompatibility. This problem is caused by an incompatibility
You cannot copy binaries between different Linux versions,
always compile the sources by yourself.
-diff -urN cdrtools-1.11.orig/README.openserver cdrtools-1.11/README.openserver
---- cdrtools-1.11.orig/README.openserver Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/README.openserver Wed Nov 27 13:13:13 2002
+diff -ruN cdrtools-2.0-/README.openserver cdrtools-2.0/README.openserver
+--- cdrtools-2.0-/README.openserver Tue Jan 25 17:37:48 2000
++++ cdrtools-2.0/README.openserver Thu Dec 26 18:25:53 2002
@@ -55,7 +55,7 @@
===================================================================
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
===================================================================
Running cdrecord with the old address method will result in an error!
-diff -urN cdrtools-1.11.orig/README.unixware cdrtools-1.11/README.unixware
---- cdrtools-1.11.orig/README.unixware Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/README.unixware Wed Nov 27 13:13:25 2002
+diff -ruN cdrtools-2.0-/README.unixware cdrtools-2.0/README.unixware
+--- cdrtools-2.0-/README.unixware Sun Mar 4 00:41:43 2001
++++ cdrtools-2.0/README.unixware Thu Dec 26 18:25:53 2002
@@ -64,7 +64,7 @@
===================================================================
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
===================================================================
Running cdrecord with the old address method will result in an error!
-diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.1 cdrtools-1.11/cdrecord/cdrecord.1
---- cdrtools-1.11.orig/cdrecord/cdrecord.1 Wed Nov 27 12:59:44 2002
-+++ cdrtools-1.11/cdrecord/cdrecord.1 Wed Nov 27 13:15:14 2002
+diff -ruN cdrtools-2.0-/cdrecord/cdrecord.1 cdrtools-2.0/cdrecord/cdrecord.1
+--- cdrtools-2.0-/cdrecord/cdrecord.1 Tue Dec 24 16:28:40 2002
++++ cdrtools-2.0/cdrecord/cdrecord.1 Thu Dec 26 18:25:53 2002
@@ -146,7 +146,7 @@
described below.
.TP
.BI gracetime= #
Set the grace time before starting to write to
-@@ -1357,7 +1357,7 @@
+@@ -1361,7 +1361,7 @@
.TP
.B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
.TP
.B CDR_SPEED
Sets the default speed value for writing (see also
-@@ -1413,8 +1413,8 @@
+@@ -1417,8 +1417,8 @@
.SH FILES
.TP
For example:
.SM CDR_FIFOSIZE=8m
or
-@@ -1423,7 +1423,7 @@
+@@ -1427,7 +1427,7 @@
.TP
CDR_DEVICE
This may either hold a device identifier that is suitable to the open
that allows to identify a specific drive on the system.
.TP
CDR_SPEED
-diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.dfl cdrtools-1.11/cdrecord/cdrecord.dfl
---- cdrtools-1.11.orig/cdrecord/cdrecord.dfl Wed Nov 27 12:59:44 2002
-+++ cdrtools-1.11/cdrecord/cdrecord.dfl Wed Nov 27 13:16:20 2002
+diff -ruN cdrtools-2.0-/cdrecord/cdrecord.dfl cdrtools-2.0/cdrecord/cdrecord.dfl
+--- cdrtools-2.0-/cdrecord/cdrecord.dfl Sun Jul 7 23:56:21 2002
++++ cdrtools-2.0/cdrecord/cdrecord.dfl Thu Dec 26 18:25:53 2002
@@ -1,6 +1,6 @@
#ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
#
#
#CDR_SPEED=40
-diff -urN cdrtools-1.11.orig/cdrecord/defaults.c cdrtools-1.11/cdrecord/defaults.c
---- cdrtools-1.11.orig/cdrecord/defaults.c Wed Nov 27 12:59:44 2002
-+++ cdrtools-1.11/cdrecord/defaults.c Wed Nov 27 13:16:57 2002
+diff -ruN cdrtools-2.0-/cdrecord/defaults.c cdrtools-2.0/cdrecord/defaults.c
+--- cdrtools-2.0-/cdrecord/defaults.c Wed Aug 14 19:52:00 2002
++++ cdrtools-2.0/cdrecord/defaults.c Thu Dec 26 18:25:53 2002
@@ -53,7 +53,7 @@
* don't contribute work and don't give support, they are causing extra
* work for me and this way slow down the cdrecord development.
}
EXPORT void
-diff -urN cdrtools-1.11.orig/doc/cdrecord.man cdrtools-1.11/doc/cdrecord.man
---- cdrtools-1.11.orig/doc/cdrecord.man Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/doc/cdrecord.man Wed Nov 27 13:18:06 2002
+diff -ruN cdrtools-2.0-/doc/cdrecord.man cdrtools-2.0/doc/cdrecord.man
+--- cdrtools-2.0-/doc/cdrecord.man Tue Dec 24 16:54:52 2002
++++ cdrtools-2.0/doc/cdrecord.man Thu Dec 26 18:28:09 2002
@@ -67,7 +67,7 @@
try the -\b-s\bsc\bca\ban\bnb\bbu\bus\bs option of c\bcd\bdr\bre\bec\bco\bor\brd\bd described below.
g\bgr\bra\bac\bce\bet\bti\bim\bme\be=\b=_\b#
Set the grace time before starting to write to _\b#
-@@ -1053,7 +1053,7 @@
- This may either hold a device identifier that is
- suitable to the open call of the SCSI transport
- library or a label in the file
+@@ -1057,7 +1057,7 @@
+ This may either hold a device identifier that is
+ suitable to the open call of the SCSI transport
+ library or a label in the file
- /etc/default/cdrecord.
+ /etc/cdrecord.conf
C\bCD\bDR\bR_\b_S\bSP\bPE\bEE\bED\bD
- Sets the default speed value for writing (see also
-@@ -1092,16 +1092,16 @@
+ Sets the default speed value for writing (see also
+@@ -1096,16 +1096,16 @@
F\bFI\bIL\bLE\bES\bS
- /etc/default/cdrecord
+ /etc/cdrecord.conf
Default values can be set for the following options
-- in /etc/default/cdrecord. For example: CDR_FIFOS-
-+ in /etc/cdrecord.conf For example: CDR_FIFOS-
+- in /etc/default/cdrecord. For example: CDR_FIFOS-
++ in /etc/cdrecord.conf For example: CDR_FIFOS-
IZE=8m or CDR_SPEED=2
CDR_DEVICE
- This may either hold a device identifier
- that is suitable to the open call of the
- SCSI transport library or a label in the
-- file /etc/default/cdrecord that allows to
-+ file /etc/cdrecord.conf that allows to
+ This may either hold a device identifier
+ that is suitable to the open call of the
+ SCSI transport library or a label in the
+- file /etc/default/cdrecord that allows to
++ file /etc/cdrecord.conf that allows to
identify a specific drive on the system.
CDR_SPEED
-diff -urN cdrtools-1.11.orig/doc/cdrecord.ps cdrtools-1.11/doc/cdrecord.ps
---- cdrtools-1.11.orig/doc/cdrecord.ps Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/doc/cdrecord.ps Wed Nov 27 13:31:20 2002
+diff -ruN cdrtools-2.0-/doc/cdrecord.ps cdrtools-2.0/doc/cdrecord.ps
+--- cdrtools-2.0-/doc/cdrecord.ps Tue Dec 24 16:55:27 2002
++++ cdrtools-2.0/doc/cdrecord.ps Thu Dec 26 18:26:59 2002
@@ -290,7 +290,7 @@
(,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
(\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
-.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
-@@ -1425,7 +1425,7 @@
- /F3 10/Times-Bold@0 SF(CDR_DEVICE)108 297.6 Q F0 1.627
- (This may either hold a de)144 309.6 R 1.628(vice identi\214er that is \
- suitable to the open call of the SCSI transport)-.25 F
--(library or a label in the \214le /etc/def)144 321.6 Q(ault/cdrecord.)
-+(library or a label in the \214le /etc/cdr)144 321.6 Q(ecord.conf)
- -.1 E F3(CDR_SPEED)108 338.4 Q F0(Sets the def)144 350.4 Q(ault speed v)
- -.1 E(alue for writing \(see also)-.25 E F3(\255speed)2.5 E F0
- (option\).)2.5 E F3(CDR_FIFOSIZE)108 367.2 Q F0(Sets the def)144 379.2 Q
-@@ -1460,16 +1460,16 @@
+@@ -1430,8 +1430,8 @@
+ G(nstead.)-2.5 E/F3 10.95/Times-Bold@0 SF(ENVIR)72 309.6 Q(ONMENT)-.329
+ E F2(CDR_DEVICE)108 321.6 Q F0 1.628(This may either hold a de)144 333.6
+ R 1.628(vice identi\214er that is suitable to the open call of the SCSI\
+- transport)-.25 F(library or a label in the \214le /etc/def)144 345.6 Q
+-(ault/cdrecord.)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
++ transport)-.25 F(library or a label in the \214le /etc/cdr)144 345.6 Q
++(ecord.conf)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
+ Q(ault speed v)-.1 E(alue for writing \(see also)-.25 E F2(\255speed)2.5
+ E F0(option\).)2.5 E F2(CDR_FIFOSIZE)108 391.2 Q F0(Sets the def)144
+ 403.2 Q(ault size of the FIFO \(see also)-.1 E F2(fs=)2.5 E F0 2.5(#o)C
+@@ -1465,16 +1465,16 @@
(ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
l be ignored if you log in using an account that has been created with \
- a remote)144 561.6 R(SCSI serv)144 573.6 Q(er program as login shell.)
---.15 E F2(FILES)72 602.4 Q F0(/etc/def)108 614.4 Q(ault/cdrecord)-.1 E
-+-.15 E F2(FILES)72 602.4 Q F0(/etc/cdr)108 614.4 Q(ecord.conf)-.1 E
- (Def)144 626.4 Q 3.227(ault v)-.1 F 3.227
--(alues can be set for the follo)-.25 F 3.228(wing options in /etc/def)
---.25 F 5.728(ault/cdrecord. F)-.1 F 3.228(or e)-.15 F(xample:)-.15 E/F4
-+(alues can be set for the follo)-.25 F 3.228(wing options in /etc/cdr)
-+-.25 F 5.728(ecord.conf F)-.1 F 3.228(or e)-.15 F(xample:)-.15 E/F4
- 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 638.4 Q F0(or)2.25 E F4
- (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 655.2 Q .262
- (This may either hold a de)180 667.2 R .262
+ a remote)144 585.6 R(SCSI serv)144 597.6 Q(er program as login shell.)
+--.15 E F3(FILES)72 626.4 Q F0(/etc/def)108 638.4 Q(ault/cdrecord)-.1 E
++-.15 E F3(FILES)72 626.4 Q F0(/etc/rec)108 638.4 Q(ecord.conf)-.1 E
+ (Def)144 650.4 Q 3.228(ault v)-.1 F 3.228
+-(alues can be set for the follo)-.25 F 3.227(wing options in /etc/def)
+--.25 F 5.727(ault/cdrecord. F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
++(alues can be set for the follo)-.25 F 3.227(wing options in /etc/rec)
++-.25 F 5.727(ecord.conf F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
+ 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 662.4 Q F0(or)2.25 E F4
+ (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 679.2 Q .261
+ (This may either hold a de)180 691.2 R .262
(vice identi\214er that is suitable to the open call of the SCSI trans-)
---.25 F 1.418(port library or a label in the \214le /etc/def)180 679.2 R
+--.25 F 1.418(port library or a label in the \214le /etc/def)180 703.2 R
-1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
-+-.25 F 1.418(port library or a label in the \214le /etc/cdr)180 679.2 R
++-.25 F 1.418(port library or a label in the \214le /etc/rec)180 703.2 R
+1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
- -.25 F(dri)180 691.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
- E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 143.345
- (chilling V)-2.5 F(ersion 1.11a35)-1.11 E(12)191.505 E EP
-diff -urN cdrtools-1.11.orig/doc/readcd.man cdrtools-1.11/doc/readcd.man
---- cdrtools-1.11.orig/doc/readcd.man Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/doc/readcd.man Wed Nov 27 13:21:04 2002
+ -.25 F(dri)180 715.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
+ E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
+ (chilling V)-2.5 F(ersion 2.0)-1.11 E(12)201.225 E EP
+diff -ruN cdrtools-2.0-/doc/readcd.man cdrtools-2.0/doc/readcd.man
+--- cdrtools-2.0-/doc/readcd.man Tue Dec 24 16:56:07 2002
++++ cdrtools-2.0/doc/readcd.man Thu Dec 26 18:25:53 2002
@@ -96,7 +96,7 @@
If the argument to the d\bde\bev\bv=\b= option does not contain
the characters ',', '/', '@' or ':', it is inter-
t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
Set the default SCSI command timeout value to _\b#
-diff -urN cdrtools-1.11.orig/doc/readcd.ps cdrtools-1.11/doc/readcd.ps
---- cdrtools-1.11.orig/doc/readcd.ps Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/doc/readcd.ps Wed Nov 27 13:29:04 2002
+diff -ruN cdrtools-2.0-/doc/readcd.ps cdrtools-2.0/doc/readcd.ps
+--- cdrtools-2.0-/doc/readcd.ps Tue Dec 24 16:56:28 2002
++++ cdrtools-2.0/doc/readcd.ps Thu Dec 26 18:25:53 2002
@@ -330,8 +330,8 @@
120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
(option does not contain the characters ',)3.547 F 1.047
F1(#).48 E F0 .13(Set the def)144 160.8 R .13
(ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
-diff -urN cdrtools-1.11.orig/doc/scgcheck.man cdrtools-1.11/doc/scgcheck.man
---- cdrtools-1.11.orig/doc/scgcheck.man Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/doc/scgcheck.man Wed Nov 27 13:21:18 2002
+diff -ruN cdrtools-2.0-/doc/scgcheck.man cdrtools-2.0/doc/scgcheck.man
+--- cdrtools-2.0-/doc/scgcheck.man Tue Dec 24 16:56:55 2002
++++ cdrtools-2.0/doc/scgcheck.man Thu Dec 26 18:25:53 2002
@@ -90,7 +90,7 @@
If the argument to the d\bde\bev\bv=\b= option does not contain
the characters ',', '/', '@' or ':', it is inter-
t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
Set the default SCSI command timeout value to _\b#
-diff -urN cdrtools-1.11.orig/doc/scgcheck.ps cdrtools-1.11/doc/scgcheck.ps
---- cdrtools-1.11.orig/doc/scgcheck.ps Wed Nov 27 12:59:43 2002
-+++ cdrtools-1.11/doc/scgcheck.ps Wed Nov 27 13:31:49 2002
+diff -ruN cdrtools-2.0-/doc/scgcheck.ps cdrtools-2.0/doc/scgcheck.ps
+--- cdrtools-2.0-/doc/scgcheck.ps Tue Dec 24 16:57:15 2002
++++ cdrtools-2.0/doc/scgcheck.ps Thu Dec 26 18:25:53 2002
@@ -317,8 +317,8 @@
1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
1.047(option does not contain the characters ',)3.547 F 1.047
10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
(ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
-diff -urN cdrtools-1.11.orig/readcd/readcd.1 cdrtools-1.11/readcd/readcd.1
---- cdrtools-1.11.orig/readcd/readcd.1 Wed Nov 27 12:59:44 2002
-+++ cdrtools-1.11/readcd/readcd.1 Wed Nov 27 13:22:11 2002
+diff -ruN cdrtools-2.0-/readcd/readcd.1 cdrtools-2.0/readcd/readcd.1
+--- cdrtools-2.0-/readcd/readcd.1 Tue Dec 24 16:28:41 2002
++++ cdrtools-2.0/readcd/readcd.1 Thu Dec 26 18:25:53 2002
@@ -186,7 +186,7 @@
.B dev=
option does not contain the characters ',', '/', '@' or ':',
.TP
.BI timeout= #
Set the default SCSI command timeout value to
-diff -urN cdrtools-1.11.orig/scgcheck/scgcheck.1 cdrtools-1.11/scgcheck/scgcheck.1
---- cdrtools-1.11.orig/scgcheck/scgcheck.1 Wed Nov 27 12:59:44 2002
-+++ cdrtools-1.11/scgcheck/scgcheck.1 Wed Nov 27 13:22:46 2002
+diff -ruN cdrtools-2.0-/scgcheck/scgcheck.1 cdrtools-2.0/scgcheck/scgcheck.1
+--- cdrtools-2.0-/scgcheck/scgcheck.1 Tue Dec 24 16:32:01 2002
++++ cdrtools-2.0/scgcheck/scgcheck.1 Thu Dec 26 18:25:53 2002
@@ -170,7 +170,7 @@
.B dev=
option does not contain the characters ',', '/', '@' or ':',