1 diff -urN cdrtools-1.11.orig/README.ATAPI cdrtools-1.11/README.ATAPI
2 --- cdrtools-1.11.orig/README.ATAPI Sun Nov 25 12:37:30 2001
3 +++ cdrtools-1.11/README.ATAPI Wed Apr 24 19:56:35 2002
5 ln -s scd1 cdrw # NOTE: see above, maybe cdrom
6 Check the new SCSI settings:
8 - Setup cdrecord's environment - edit /etc/default/cdrecord:
9 + Setup cdrecord's environment - edit /etc/cdrecord.conf:
13 Input the right values, the fields are described in the manpage
14 of cdrecord. Alternatively, you may use this values as
15 cdrecord-parameter or take a frontend with an own configuration
16 - scheme, then you don't need to modify /etc/default/cdrecord.
17 + scheme, then you don't need to modify /etc/cdrecord.conf
18 9. It's done! Insert a CD and try "cdrecord -v -toc"
19 /*--------------------------------------------------------------------------*/
20 He had constant buffer underrun problems:
21 diff -urN cdrtools-1.11.orig/README.linux cdrtools-1.11/README.linux
22 --- cdrtools-1.11.orig/README.linux Sun Apr 1 12:08:41 2001
23 +++ cdrtools-1.11/README.linux Wed Apr 24 19:56:06 2002
25 If dev=0,0,0 does not work but -dev=0,0,0 works you found this
26 incompatibility. This problem is caused by an incompatibility
27 in ctype.h and it seems that there are other compatibility problems
28 - e.g. with reading /etc/default/cdrecord.
29 + e.g. with reading /etc/cdrecord.conf
31 You cannot copy binaries between different Linux versions,
32 always compile the sources by yourself.
33 diff -urN cdrtools-1.11.orig/README.openserver cdrtools-1.11/README.openserver
34 --- cdrtools-1.11.orig/README.openserver Tue Jan 25 17:37:48 2000
35 +++ cdrtools-1.11/README.openserver Wed Apr 24 19:56:49 2002
37 ===================================================================
38 THE OLD ADDRESSING IS NO LONGER AVAILABLE!
40 - PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
41 + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
42 ===================================================================
44 Running cdrecord with the old address method will result in an error!
45 diff -urN cdrtools-1.11.orig/README.unixware cdrtools-1.11/README.unixware
46 --- cdrtools-1.11.orig/README.unixware Sun Mar 4 00:41:43 2001
47 +++ cdrtools-1.11/README.unixware Wed Apr 24 19:57:01 2002
49 ===================================================================
50 THE OLD ADDRESSING IS NO LONGER AVAILABLE!
52 - PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
53 + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
54 ===================================================================
56 Running cdrecord with the old address method will result in an error!
57 diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.1 cdrtools-1.11/cdrecord/cdrecord.1
58 --- cdrtools-1.11.orig/cdrecord/cdrecord.1 Sat Feb 23 21:21:12 2002
59 +++ cdrtools-1.11/cdrecord/cdrecord.1 Wed Apr 24 19:59:30 2002
64 -If a file /etc/default/cdrecord exists, the parameter to the
65 +If a file /etc/cdrecord.conf exists, the parameter to the
67 option may also be a drive name label in said file (see FILES section).
71 option does not contain the characters ',', '/', '@' or ':',
72 it is interpreted as an label name that may be found in the file
73 -/etc/default/cdrecord (see FILES section).
74 +/etc/cdrecord.conf (see FILES section).
77 Set the default SCSI command timeout value to
81 This may either hold a device identifier that is suitable to the open
82 -call of the SCSI transport library or a label in the file /etc/default/cdrecord.
83 +call of the SCSI transport library or a label in the file /etc/cdrecord.conf
86 Sets the default speed value for writing (see also
91 -/etc/default/cdrecord
92 -Default values can be set for the following options in /etc/default/cdrecord.
94 +Default values can be set for the following options in /etc/cdrecord.conf
101 This may either hold a device identifier that is suitable to the open
102 -call of the SCSI transport library or a label in the file /etc/default/cdrecord
103 +call of the SCSI transport library or a label in the file /etc/cdrecord.conf
104 that allows to identify a specific drive on the system.
107 diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.dfl cdrtools-1.11/cdrecord/cdrecord.dfl
108 --- cdrtools-1.11.orig/cdrecord/cdrecord.dfl Fri Jun 1 06:55:12 2001
109 +++ cdrtools-1.11/cdrecord/cdrecord.dfl Wed Apr 24 20:00:44 2002
111 #ident @(#)cdrecord.dfl 1.3 01/06/01 Copyr 1998 J. Schilling
113 -# This file is /etc/default/cdrecord
114 +# This file is /etc/cdrecord.conf
115 # It contains defaults that are used if no command line option
116 # or environment is present.
118 diff -urN cdrtools-1.11.orig/cdrecord/defaults.c cdrtools-1.11/cdrecord/defaults.c
119 --- cdrtools-1.11.orig/cdrecord/defaults.c Tue Mar 5 23:34:47 2002
120 +++ cdrtools-1.11/cdrecord/defaults.c Wed Apr 24 19:57:27 2002
122 * don't contribute work and don't give support, they are causing extra
123 * work for me and this way slow down the cdrecord development.
125 - return (defltopen("/etc/default/cdrecord"));
126 + return (defltopen("/etc/cdrecord.conf"));
130 diff -urN cdrtools-1.11.orig/doc/cdrecord.man cdrtools-1.11/doc/cdrecord.man
131 --- cdrtools-1.11.orig/doc/cdrecord.man Tue Apr 17 00:02:12 2001
132 +++ cdrtools-1.11/doc/cdrecord.man Wed Apr 24 20:03:32 2002
137 - If a file /etc/default/cdrecord exists, the parameter to the
138 + If a file /etc/cdrecord.conf exists, the parameter to the
139 d
\bd
\bd
\bde
\be
\be
\bev
\bv
\bv
\bv=
\b=
\b=
\b= option may also be a drive name label in said file (see
143 If the argument to the d
\bd
\bd
\bde
\be
\be
\bev
\bv
\bv
\bv=
\b=
\b=
\b= option does not contain the
144 characters ',', '/', '@' or ':', it is interpreted as
145 an label name that may be found in the file
146 - /etc/default/cdrecord (see FILES section).
147 + /etc/cdrecord.conf (see FILES section).
154 suitable to the open call of the SCSI transport library
155 - or a label in the file /etc/default/cdrecord.
156 + or a label in the file /etc/cdrecord.conf
159 Sets the default speed value for writing (see also -
\b-
\b-
\b-
160 @@ -942,16 +942,16 @@
163 F
\bF
\bF
\bFI
\bI
\bI
\bIL
\bL
\bL
\bLE
\bE
\bE
\bES
\bS
\bS
\bS
164 - /etc/default/cdrecord
166 Default values can be set for the following options in
167 - /etc/default/cdrecord. For example: CDR_FIFOSIZE=8m
168 + /etc/cdrecord.conf For example: CDR_FIFOSIZE=8m
172 This may either hold a device identifier that is
173 suitable to the open call of the SCSI transport
174 library or a label in the file
175 - /etc/default/cdrecord that allows to identify a
176 + /etc/cdrecord.conf that allows to identify a
177 specific drive on the system.
180 diff -urN cdrtools-1.11.orig/doc/cdrecord.ps cdrtools-1.11/doc/cdrecord.ps
181 --- cdrtools-1.11.orig/doc/cdrecord.ps Tue Apr 17 00:01:51 2001
182 +++ cdrtools-1.11/doc/cdrecord.ps Wed Apr 24 20:04:39 2002
184 (cdrecord)1485 4848 w
186 (described below.)1 684 1 1900 4848 t
187 -(If a \256le /etc/default/cdrecord exists, the parameter to the)8 2324 1 1080 5136 t
188 +(If a \256le /etc/cdrecord.conf exists, the parameter to the)8 2324 1 1080 5136 t
192 @@ -1135,7 +1135,7 @@
195 ( it is inter-)3 447(' or ':',)2 305 2 4648 4728 t
196 -(preted as an label name that may be found in the \256le /etc/default/cdrecord \(see FILES section\).)15 3901 1 1440 4848 t
197 +(preted as an label name that may be found in the \256le /etc/cdrecord.conf \(see FILES section\).)15 3901 1 1440 4848 t
199 (timeout=)1080 5016 w
201 @@ -2205,7 +2205,7 @@
204 ( call of the SCSI transport)5 1126(This may either hold a device identi\256er that is suitable to the open)12 2834 2 1440 3960 t
205 -(library or a label in the \256le /etc/default/cdrecord.)7 1996 1 1440 4080 t
206 +(library or a label in the \256le /etc/cdrecord.conf)7 1996 1 1440 4080 t
210 @@ -2233,8 +2233,8 @@
214 -(/etc/default/cdrecord)1080 5064 w
215 -( example:)1 423( For)1 229( /etc/default/cdrecord.)1 907(Default values can be set for the following options in)9 2401 4 1440 5184 t
216 +(/etc/cdrecord.conf)1080 5064 w
217 +( example:)1 423( For)1 229( /etc/cdrecord.conf)1 907(Default values can be set for the following options in)9 2401 4 1440 5184 t
221 @@ -2256,7 +2256,7 @@
224 ( is suitable to the open call of the SCSI)9 1729(This may either hold a device identi\256er that)7 1871 2 1800 5592 t
225 -( identify a)2 455(transport library or a label in the \256le /etc/default/cdrecord that allows to)11 3145 2 1800 5712 t
226 +( identify a)2 455(transport library or a label in the \256le /etc/cdrecord.conf that allows to)11 3145 2 1800 5712 t
227 (speci\256c drive on the system.)4 1167 1 1800 5832 t
230 diff -urN cdrtools-1.11.orig/doc/readcd.man cdrtools-1.11/doc/readcd.man
231 --- cdrtools-1.11.orig/doc/readcd.man Tue Apr 17 00:02:45 2001
232 +++ cdrtools-1.11/doc/readcd.man Wed Apr 24 20:04:47 2002
234 If the argument to the d
\bd
\bd
\bde
\be
\be
\bev
\bv
\bv
\bv=
\b=
\b=
\b= option does not contain the
235 characters ',', '/', '@' or ':', it is interpreted as
236 an label name that may be found in the file
237 - /etc/default/cdrecord (see FILES section).
238 + /etc/cdrecord.conf (see FILES section).
240 t
\bt
\bt
\bti
\bi
\bi
\bim
\bm
\bm
\bme
\be
\be
\beo
\bo
\bo
\bou
\bu
\bu
\but
\bt
\bt
\bt=
\b=
\b=
\b=#
241 Set the default SCSI command timeout value to #
242 diff -urN cdrtools-1.11.orig/doc/readcd.ps cdrtools-1.11/doc/readcd.ps
243 --- cdrtools-1.11.orig/doc/readcd.ps Tue Apr 17 00:03:09 2001
244 +++ cdrtools-1.11/doc/readcd.ps Wed Apr 24 20:04:58 2002
248 ( it is inter-)3 447(' or ':',)2 305 2 4648 960 t
249 -(preted as an label name that may be found in the \256le /etc/default/cdrecord \(see FILES section\).)15 3901 1 1440 1080 t
250 +(preted as an label name that may be found in the \256le /etc/cdrecord.conf \(see FILES section\).)15 3901 1 1440 1080 t
252 (timeout=)1080 1248 w
254 diff -urN cdrtools-1.11.orig/doc/scgcheck.man cdrtools-1.11/doc/scgcheck.man
255 --- cdrtools-1.11.orig/doc/scgcheck.man Fri Apr 13 20:16:03 2001
256 +++ cdrtools-1.11/doc/scgcheck.man Wed Apr 24 20:05:06 2002
258 If the argument to the d
\bd
\bd
\bde
\be
\be
\bev
\bv
\bv
\bv=
\b=
\b=
\b= option does not contain the
259 characters ',', '/', '@' or ':', it is interpreted as
260 an label name that may be found in the file
261 - /etc/default/cdrecord (see FILES section).
262 + /etc/cdrecord.conf (see FILES section).
264 t
\bt
\bt
\bti
\bi
\bi
\bim
\bm
\bm
\bme
\be
\be
\beo
\bo
\bo
\bou
\bu
\bu
\but
\bt
\bt
\bt=
\b=
\b=
\b=#
265 Set the default SCSI command timeout value to #
266 diff -urN cdrtools-1.11.orig/doc/scgcheck.ps cdrtools-1.11/doc/scgcheck.ps
267 --- cdrtools-1.11.orig/doc/scgcheck.ps Fri Apr 13 20:17:07 2001
268 +++ cdrtools-1.11/doc/scgcheck.ps Wed Apr 24 20:05:17 2002
272 ( it is inter-)3 447(' or ':',)2 305 2 4648 1320 t
273 -(preted as an label name that may be found in the \256le /etc/default/cdrecord \(see FILES section\).)15 3901 1 1440 1440 t
274 +(preted as an label name that may be found in the \256le /etc/cdrecord.conf \(see FILES section\).)15 3901 1 1440 1440 t
276 (timeout=)1080 1608 w
278 diff -urN cdrtools-1.11.orig/readcd/readcd.1 cdrtools-1.11/readcd/readcd.1
279 --- cdrtools-1.11.orig/readcd/readcd.1 Fri Jan 18 12:38:58 2002
280 +++ cdrtools-1.11/readcd/readcd.1 Wed Apr 24 19:57:16 2002
283 option does not contain the characters ',', '/', '@' or ':',
284 it is interpreted as an label name that may be found in the file
285 -/etc/default/cdrecord (see FILES section).
286 +/etc/cdrecord.conf (see FILES section).
289 Set the default SCSI command timeout value to
290 diff -urN cdrtools-1.11.orig/scgcheck/scgcheck.1 cdrtools-1.11/scgcheck/scgcheck.1
291 --- cdrtools-1.11.orig/scgcheck/scgcheck.1 Mon Apr 16 23:58:25 2001
292 +++ cdrtools-1.11/scgcheck/scgcheck.1 Wed Apr 24 19:58:28 2002
295 option does not contain the characters ',', '/', '@' or ':',
296 it is interpreted as an label name that may be found in the file
297 -/etc/default/cdrecord (see FILES section).
298 +/etc/cdrecord.conf (see FILES section).
301 Set the default SCSI command timeout value to