1 diff -ruN cdrtools-2.0-/cdrecord/README.ATAPI cdrtools-2.0/cdrecord/README.ATAPI
2 --- cdrtools-2.0-/cdrecord/README.ATAPI Tue Dec 24 17:37:35 2002
3 +++ cdrtools-2.0/cdrecord/README.ATAPI Thu Dec 26 18:25:53 2002
5 ln -s scd1 cdrw # NOTE: see above, maybe cdrom
6 Check the new SCSI settings:
8 - Setup cdrecord's environment - edit /etc/default/cdrecord:
9 + Setup cdrecord's environment - edit /etc/cdrecord.conf:
13 Input the right values, the fields are described in the manpage
14 of cdrecord. Alternatively, you may use this values as
15 cdrecord-parameter or take a frontend with an own configuration
16 - scheme, then you don't need to modify /etc/default/cdrecord.
17 + scheme, then you don't need to modify /etc/cdrecord.conf
18 9. It's done! Insert a CD and try "cdrecord -v -toc"
19 /*--------------------------------------------------------------------------*/
20 He had constant buffer underrun problems:
21 diff -ruN cdrtools-2.0-/README.openserver cdrtools-2.0/README.openserver
22 --- cdrtools-2.0-/README.openserver Tue Jan 25 17:37:48 2000
23 +++ cdrtools-2.0/README.openserver Thu Dec 26 18:25:53 2002
25 ===================================================================
26 THE OLD ADDRESSING IS NO LONGER AVAILABLE!
28 - PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
29 + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
30 ===================================================================
32 Running cdrecord with the old address method will result in an error!
33 diff -ruN cdrtools-2.0-/README.unixware cdrtools-2.0/README.unixware
34 --- cdrtools-2.0-/README.unixware Sun Mar 4 00:41:43 2001
35 +++ cdrtools-2.0/README.unixware Thu Dec 26 18:25:53 2002
37 ===================================================================
38 THE OLD ADDRESSING IS NO LONGER AVAILABLE!
40 - PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
41 + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
42 ===================================================================
44 Running cdrecord with the old address method will result in an error!
45 diff -ruN cdrtools-2.0/cdrecord/cdrecord.1.orig cdrtools-2.0/cdrecord/cdrecord.1
46 --- cdrtools-2.0/cdrecord/cdrecord.1.orig 2010-01-03 22:32:07.000000000 +0100
47 +++ cdrtools-2.0/cdrecord/cdrecord.1 2010-01-05 08:57:54.000000000 +0100
49 explained below refers to
50 .IR scsibus / target / lun
51 of the CD/DVD/BluRay-Recorder.
52 -If a file /etc/default/cdrecord exists, the parameter to the
53 +If a file /etc/cdrecord.conf exists, the parameter to the
55 option may also be a drive name label in said file (see FILES section).
57 @@ -1199,13 +1199,13 @@
60 will try to get a drive specific speed value from the file
61 -.B /etc/default/cdrecord
62 +.B /etc/cdrecord.conf
63 and if it cannot find one, it will try to get the speed value from the
65 environment and later from the
68 -.BR /etc/default/cdrecord .
69 +.BR /etc/cdrecord.conf .
70 If no speed value could be found, cdrecord uses a drive specific default speed.
71 The default for all new (MMC compliant) drives is to use the maximum supported by the drive.
77 -If a file /etc/default/cdrecord exists, and
78 +If a file /etc/cdrecord.conf exists, and
79 if the argument to the
84 does not contain the characters ',', '/', '@' or ':',
85 it is interpreted as a device label name that was defined in the file
86 -/etc/default/cdrecord (see FILES section).
87 +/etc/cdrecord.conf (see FILES section).
89 .B \h'-2m'Autotarget Mode
94 This may either hold a device identifier that is suitable to the open
95 -call of the SCSI transport library or a label in the file /etc/default/cdrecord.
96 +call of the SCSI transport library or a label in the file /etc/cdrecord.conf
99 Sets the default speed value for writing (see also
100 @@ -2220,8 +2220,11 @@
104 -.B /etc/default/cdrecord
105 -Default values can be set for the following options in /etc/default/cdrecord.
106 +.B /etc/cdrecord.conf
107 +Default values can be set for the following options in /etc/cdrecord.conf .
108 +Note that this path has been changed from standard location in cdrtools
109 +distribution (/etc/default/cdrecord) to be consistent with other packages
110 +which don't use /etc/default directory in general.
114 @@ -2230,7 +2233,7 @@
117 This may either hold a device identifier that is suitable to the open
118 -call of the SCSI transport library or a label in the file /etc/default/cdrecord
119 +call of the SCSI transport library or a label in the file /etc/cdrecord.conf
120 that allows to identify a specific drive on the system.
123 diff -ruN cdrtools-2.0-/cdrecord/cdrecord.dfl cdrtools-2.0/cdrecord/cdrecord.dfl
124 --- cdrtools-2.0-/cdrecord/cdrecord.dfl Sun Jul 7 23:56:21 2002
125 +++ cdrtools-2.0/cdrecord/cdrecord.dfl Thu Dec 26 18:25:53 2002
127 #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
129 -# This file is /etc/default/cdrecord
130 +# This file is /etc/cdrecord.conf
131 # It contains defaults that are used if no command line option
132 # or environment is present.
135 # Note that newer cdrecord versions do not default
136 # to speed=1. For MMC compliant drives, the default
137 # is to write at maximum speed, so it in general does
138 -# not make sense to set up a default speed in /etc/default/cdrecord
139 +# not make sense to set up a default speed in /etc/cdrecord.conf
143 diff -ruN cdrtools-2.0-/libcdrdeflt/cdrdeflt.c cdrtools-2.0/libcdrdeflt/cdrdeflt.c
144 --- cdrtools-2.0-/libcdrdeflt/cdrdeflt.c Wed Aug 14 19:52:00 2002
145 +++ cdrtools-2.0/libcdrdeflt/cdrdeflt.c Thu Dec 26 18:25:53 2002
147 * don't contribute work and don't give support, they are causing extra
148 * work for me and this way slow down the cdrecord development.
150 - return (defltopen("/etc/default/cdrecord"));
151 + return (defltopen("/etc/cdrecord.conf"));
155 diff -ruN cdrtools-2.0-/doc/cdrecord.man cdrtools-2.0/doc/cdrecord.man
156 --- cdrtools-2.0-/doc/cdrecord.man Tue Dec 24 16:54:52 2002
157 +++ cdrtools-2.0/doc/cdrecord.man Thu Dec 26 18:28:09 2002
159 try the -
\b-s
\bsc
\bca
\ban
\bnb
\bbu
\bus
\bs option of c
\bcd
\bdr
\bre
\bec
\bco
\bor
\brd
\bd described below.
162 - If a file /etc/default/cdrecord exists, the parameter to
163 + If a file /etc/cdrecord.conf exists, the parameter to
164 the d
\bde
\bev
\bv=
\b= option may also be a drive name label in said
165 file (see FILES section).
168 If the argument to the d
\bde
\bev
\bv=
\b= option does not contain
169 the characters ',', '/', '@' or ':', it is inter-
170 preted as an label name that may be found in the
171 - file /etc/default/cdrecord (see FILES section).
172 + file /etc/cdrecord.conf (see FILES section).
174 g
\bgr
\bra
\bac
\bce
\bet
\bti
\bim
\bme
\be=
\b=_
\b#
175 Set the grace time before starting to write to _
\b#
176 @@ -1057,7 +1057,7 @@
177 This may either hold a device identifier that is
178 suitable to the open call of the SCSI transport
179 library or a label in the file
180 - /etc/default/cdrecord.
183 C
\bCD
\bDR
\bR_
\b_S
\bSP
\bPE
\bEE
\bED
\bD
184 Sets the default speed value for writing (see also
185 @@ -1096,16 +1096,16 @@
189 - /etc/default/cdrecord
191 Default values can be set for the following options
192 - in /etc/default/cdrecord. For example: CDR_FIFOS-
193 + in /etc/cdrecord.conf For example: CDR_FIFOS-
194 IZE=8m or CDR_SPEED=2
197 This may either hold a device identifier
198 that is suitable to the open call of the
199 SCSI transport library or a label in the
200 - file /etc/default/cdrecord that allows to
201 + file /etc/cdrecord.conf that allows to
202 identify a specific drive on the system.
205 diff -ruN cdrtools-2.0-/doc/cdrecord.ps cdrtools-2.0/doc/cdrecord.ps
206 --- cdrtools-2.0-/doc/cdrecord.ps Tue Dec 24 16:55:27 2002
207 +++ cdrtools-2.0/doc/cdrecord.ps Thu Dec 26 18:26:59 2002
209 (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
210 (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
211 Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114
212 -(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115
213 +(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115
214 (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115
215 (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115
216 (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On)
218 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
219 (option does not contain the characters ',)3.547 F 1.047
220 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
221 -(preted as an label name that may be found in the \214le /etc/def)144
222 -568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108
223 +(preted as an label name that may be found in the \214le /etc/cdr)144
224 +568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108
225 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
226 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
227 -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
228 @@ -1430,8 +1430,8 @@
229 G(nstead.)-2.5 E/F3 10.95/Times-Bold@0 SF(ENVIR)72 309.6 Q(ONMENT)-.329
230 E F2(CDR_DEVICE)108 321.6 Q F0 1.628(This may either hold a de)144 333.6
231 R 1.628(vice identi\214er that is suitable to the open call of the SCSI\
232 - transport)-.25 F(library or a label in the \214le /etc/def)144 345.6 Q
233 -(ault/cdrecord.)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
234 + transport)-.25 F(library or a label in the \214le /etc/cdr)144 345.6 Q
235 +(ecord.conf)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
236 Q(ault speed v)-.1 E(alue for writing \(see also)-.25 E F2(\255speed)2.5
237 E F0(option\).)2.5 E F2(CDR_FIFOSIZE)108 391.2 Q F0(Sets the def)144
238 403.2 Q(ault size of the FIFO \(see also)-.1 E F2(fs=)2.5 E F0 2.5(#o)C
239 @@ -1465,16 +1465,16 @@
240 (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
241 l be ignored if you log in using an account that has been created with \
242 a remote)144 585.6 R(SCSI serv)144 597.6 Q(er program as login shell.)
243 --.15 E F3(FILES)72 626.4 Q F0(/etc/def)108 638.4 Q(ault/cdrecord)-.1 E
244 +-.15 E F3(FILES)72 626.4 Q F0(/etc/rec)108 638.4 Q(ecord.conf)-.1 E
245 (Def)144 650.4 Q 3.228(ault v)-.1 F 3.228
246 -(alues can be set for the follo)-.25 F 3.227(wing options in /etc/def)
247 --.25 F 5.727(ault/cdrecord. F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
248 +(alues can be set for the follo)-.25 F 3.227(wing options in /etc/rec)
249 +-.25 F 5.727(ecord.conf F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
250 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 662.4 Q F0(or)2.25 E F4
251 (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 679.2 Q .261
252 (This may either hold a de)180 691.2 R .262
253 (vice identi\214er that is suitable to the open call of the SCSI trans-)
254 --.25 F 1.418(port library or a label in the \214le /etc/def)180 703.2 R
255 -1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
256 +-.25 F 1.418(port library or a label in the \214le /etc/rec)180 703.2 R
257 +1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
258 -.25 F(dri)180 715.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
259 E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
260 (chilling V)-2.5 F(ersion 2.0)-1.11 E(12)201.225 E EP
261 diff -ruN cdrtools-2.0-/doc/readcd.man cdrtools-2.0/doc/readcd.man
262 --- cdrtools-2.0-/doc/readcd.man Tue Dec 24 16:56:07 2002
263 +++ cdrtools-2.0/doc/readcd.man Thu Dec 26 18:25:53 2002
265 If the argument to the d
\bde
\bev
\bv=
\b= option does not contain
266 the characters ',', '/', '@' or ':', it is inter-
267 preted as an label name that may be found in the
268 - file /etc/default/cdrecord (see FILES section).
269 + file /etc/cdrecord.conf (see FILES section).
271 t
\bti
\bim
\bme
\beo
\bou
\but
\bt=
\b=_
\b#
272 Set the default SCSI command timeout value to _
\b#
273 diff -ruN cdrtools-2.0-/doc/readcd.ps cdrtools-2.0/doc/readcd.ps
274 --- cdrtools-2.0-/doc/readcd.ps Tue Dec 24 16:56:28 2002
275 +++ cdrtools-2.0/doc/readcd.ps Thu Dec 26 18:25:53 2002
277 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
278 (option does not contain the characters ',)3.547 F 1.047
279 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
280 -(preted as an label name that may be found in the \214le /etc/def)144
281 -132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
282 +(preted as an label name that may be found in the \214le /etc/cdr)144
283 +132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
284 F1(#).48 E F0 .13(Set the def)144 160.8 R .13
285 (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
286 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
287 diff -ruN cdrtools-2.0-/doc/scgcheck.man cdrtools-2.0/doc/scgcheck.man
288 --- cdrtools-2.0-/doc/scgcheck.man Tue Dec 24 16:56:55 2002
289 +++ cdrtools-2.0/doc/scgcheck.man Thu Dec 26 18:25:53 2002
291 If the argument to the d
\bde
\bev
\bv=
\b= option does not contain
292 the characters ',', '/', '@' or ':', it is inter-
293 preted as an label name that may be found in the
294 - file /etc/default/cdrecord (see FILES section).
295 + file /etc/cdrecord.conf (see FILES section).
297 t
\bti
\bim
\bme
\beo
\bou
\but
\bt=
\b=_
\b#
298 Set the default SCSI command timeout value to _
\b#
299 diff -ruN cdrtools-2.0-/doc/scgcheck.ps cdrtools-2.0/doc/scgcheck.ps
300 --- cdrtools-2.0-/doc/scgcheck.ps Tue Dec 24 16:57:15 2002
301 +++ cdrtools-2.0/doc/scgcheck.ps Thu Dec 26 18:25:53 2002
303 1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
304 1.047(option does not contain the characters ',)3.547 F 1.047
305 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
306 -(preted as an label name that may be found in the \214le /etc/def)144 96
307 -Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
308 +(preted as an label name that may be found in the \214le /etc/cdr)144 96
309 +Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
310 10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
311 (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
312 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
313 diff -ruN cdrtools-2.0/readcd/readcd.1.orig cdrtools-2.0/readcd/readcd.1
314 --- cdrtools-2.0/readcd/readcd.1.orig 2009-12-06 23:02:40.000000000 +0100
315 +++ cdrtools-2.0/readcd/readcd.1 2010-01-05 09:05:53.000000000 +0100
317 explained below refers to
318 .IR scsibus / target / lun
319 of the CD/DVD/BluRay-Recorder.
320 -If a file /etc/default/cdrecord exists, the parameter to the
321 +If a file /etc/cdrecord.conf exists, the parameter to the
323 option may also be a drive name label in said file (see FILES section).
329 -If a file /etc/default/cdrecord exists, and
330 +If a file /etc/cdrecord.conf exists, and
331 if the argument to the
336 does not contain the characters ',', '/', '@' or ':',
337 it is interpreted as a device label name that was defined in the file
338 -/etc/default/cdrecord (see FILES section).
339 +/etc/cdrecord.conf (see FILES section).
341 .B \h'-2m'Autotarget Mode