-##
-## apache.conf -- Apache HTTP server configuration file
-##
-
-##### Global Environment
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it can
-# find its configuration files.
-
-### ServerType
-# is either inetd, or standalone. Inetd mode is only supported on Unix
-# platforms.
+### $Id$
+###
+### Main Configuration Section
+### You really shouldn't change these settings unless you're a guru
+###
+### This config aims to be clean and readable, you should see
+### /usr/share/doc/apache1-*/httpd.conf* for comments on the directives.
+###
ServerType standalone
+ServerRoot "/etc/apache"
-### PidFile
-# The file in which the server should record its process identification
-# number when it starts.
-
-PidFile /var/run/apache.pid
-
-### Timeout
-# The number of seconds before receives and sends time out.
-### KeepAliveTimeout
-# Number of seconds to wait for the next request from the same client on the
-# same connection.
-
-Timeout 300
-KeepAliveTimeout 15
-
-### KeepAlive
-# Whether or not to allow persistent connections (more than one request per
-# connection). Set to "Off" to deactivate.
-### MaxKeepAliveRequests
-# The maximum number of requests to allow during a persistent connection.
-# Set to 0 to allow an unlimited amount. We recommend you leave this number
-# high, for maximum performance.
-
-KeepAlive On
-MaxKeepAliveRequests 100
-
-### ServerRoot
-# The top of the directory tree under which the server's configuration,
-# error, and log files are kept.
-#
-# NOTE! If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
-ServerRoot "/usr"
-
-### LockFile
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename.
-#
-LockFile /var/run/apache.lock
-
-### ScoreBoardFile
-# File used to store internal server process information. Not all
-# architectures require this. But if yours does (you'll know because this
-# file will be created when you run Apache) then you *must* ensure that no
-# two invocations of Apache share the same scoreboard file.
-
-ScoreBoardFile /var/run/apache.scoreboard
-
-#
-# In the standard configuration, the server will process this file,
-# srm.conf, and access.conf in that order. The latter two files are
-# now distributed empty, as it is recommended that all directives
-# be kept in a single file for simplicity. The commented-out values
-# below are the built-in defaults. You can have the server ignore
-# these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
ResourceConfig /dev/null
AccessConfig /dev/null
-#
-# Server-pool size regulation. Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request. If there are fewer than MinSpareServers, it creates
-# a new spare. If there are more than MaxSpareServers, some of the
-# spares die off. The default values are probably OK for most sites.
-#
-MinSpareServers 5
-MaxSpareServers 10
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 5
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies. The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources. On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-# request per connection. For example, if a child process handles
-# an initial request and 10 subsequent "keptalive" requests, it
-# would only count as 1 request towards this limit.
-
-MaxRequestsPerChild 30
-
-### Listen
-# Allows you to bind Apache to specific IP addresses and/or ports, in
-# addition to the default. See also the <VirtualHost> directive.
-
-#Listen 12.34.56.78:80
-Listen 80
-
-# Listen can take two arguments.
-# (this is an extension for supporting IPv6 addresses)
-#Listen :: 80
-#Listen 0.0.0.0 80
-
-### BindAddress
-# You can support virtual hosts with this option. This directive is used to
-# tell the server which IP address to listen to. It can either contain "*",
-# an IP address, or a fully qualified Internet domain name. See also the
-# <VirtualHost> and Listen directives.
-
-#BindAddress *
-
-
-### Section 2: Dynamic Shared Object (DSO) Support
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-
-# Reconstruction of the complete module list from all available modules
-# (static and shared ones) to achieve correct module execution order.
-# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-AddModule mod_so.c
-
-### ExtendedStatus
-# controls whether Apache will generate "full" status information
-# (ExtendedStatus On) or just basic information (ExtendedStatus Off) when
-# the "server-status" handler is called. The default is Off.
-
-#ExtendedStatus On
-
-### Section 3: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-User http
-Group http
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin admin@your_domain.org
-
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
-# machine always knows itself by this address. If you use Apache strictly for
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-#ServerName new.host.name
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/home/services/apache/html"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# permissions.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/home/services/apache/html">
-
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
- Options Indexes FollowSymLinks MultiViews
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo",
-# "AuthConfig", and "Limit"
-#
- AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-UserDir public_html
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/users/*/public_html>
-# AllowOverride FileInfo AuthConfig Limit
-# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-# <Limit GET POST OPTIONS PROPFIND>
-# Order allow,deny
-# Allow from all
-# </Limit>
-# <LimitExcept GET POST OPTIONS PROPFIND>
-# Order deny,allow
-# Deny from all
-# </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index. Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
- DirectoryIndex index.html index.htm index.shtml index.cgi index.php
-</IfModule>
+LockFile /var/run/apache.lock
+PidFile /var/run/apache.pid
+ScoreBoardFile /var/run/apache.scoreboard
+ErrorLog /var/log/apache/error_log
+LogLevel warn
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients. Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons. Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files. If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
- Order allow,deny
- Deny from all
- Satisfy All
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name. With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible. This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found. /etc/mime.types is provided by mailcap package.
-#
-TypesConfig /etc/mime.types
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
DefaultType text/plain
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
- MIMEMagicFile /etc/apache/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
HostnameLookups Off
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog /var/log/apache/error_log
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here. Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/apache/access_log common
-CustomLog /var/log/apache/referer_log referer
-CustomLog /var/log/apache/agent_log agent
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of: On | Off | EMail
-#
ServerSignature Email
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-# Note that if you include a trailing / on fakename then the server will
-# require it to be present in the URL. So "/icons" isn't aliased in this
-# example, only "/icons/"..
-#
-Alias /icons/ "/home/services/apache/icons/"
-
-<Directory "/home/services/apache/icons">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
-</Directory>
-
-Alias /manual/ "/usr/share/apache1-manual/"
-
-<Directory "/usr/share/apache1-manual">
- Options Indexes MultiViews
- AllowOverride None
- order deny,allow
- deny from all
- allow from 127.0.0.1
-</Directory>
-
-#
-# ScriptAlias: This controls which directories contain server scripts.
-# ScriptAliases are essentially the same as Aliases, except that
-# documents in the realname directory are treated as applications and
-# run by the server when requested rather than as documents sent to the client.
-# The same rules about trailing "/" apply to ScriptAlias directives as to
-# Alias.
-#
-ScriptAlias /cgi-bin/ "/home/services/apache/cgi-bin/"
-
-#
-# "/home/services/apache/cgi-bin" should be changed to whatever your
-# ScriptAliased CGI directory exists, if you have that configured.
-#
-<Directory "/home/services/apache/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
-# information on the fly. Note: Not all browsers support this.
-# Despite the name similarity, the following Add* directives have nothing
-# to do with the FancyIndexing customization directives above.
-#
-AddEncoding x-compress Z
-AddEncoding x-gzip gz
-
-#
-# AddLanguage allows you to specify the language of a document. You can
-# then use content negotiation to give a browser a file in a language
-# it can understand.
-#
-# Note 1: The suffix does not have to be the same as the language
-# keyword --- those with documents in Polish (whose net-standard
-# language code is pl) may wish to use "AddLanguage pl .po" to
-# avoid the ambiguity with the common suffix for perl scripts.
-#
-# Note 2: The example entries below illustrate that in quite
-# some cases the two character 'Language' abbriviation is not
-# identical to the two character 'Country' code for its country,
-# E.g. 'Danmark/dk' versus 'Danish/da'.
-#
-# Note 3: In the case of 'ltz' we violate the RFC by using a three char
-# specifier. But there is 'work in progress' to fix this and get
-# the reference data for rfc1766 cleaned up.
-#
-# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
-# French (fr) - German (de) - Greek-Modern (el)
-# Italian (it) - Korean (kr) - Norwegian (no)
-# Portugese (pt) - Luxembourgeois* (ltz)
-# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
-# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
-# Russian (ru)
-#
-AddLanguage ca .ca
-AddLanguage cz .cz
-AddLanguage da .dk
-AddLanguage de .de
-AddLanguage en .en
-AddLanguage el .el
-AddLanguage es .es
-AddLanguage et .ee
-AddLanguage fr .fr
-AddLanguage he .he
-AddLanguage it .it
-AddLanguage ja .ja
-AddLanguage kr .kr
-AddLanguage ltz .lu
-AddLanguage nl .nl
-AddLanguage nn .nn
-AddLanguage no .no
-AddLanguage pl .po
-AddLanguage pt .pt
-AddLanguage pt-br .pt-br
-AddLanguage ru .ru
-AddLanguage sv .sv
-AddLanguage tw .tw
-AddLanguage zh-tw .tw
-
-AddCharset Big5 .Big5 .big5
-AddCharset CP866 .cp866
-AddCharset ISO-8859-2 .iso-pl
-AddCharset ISO-8859-5 .iso-ru
-AddCharset ISO-8859-8 .iso8859-8
-AddCharset ISO-2022-JP .his
-AddCharset ISO-2022-KR .iso-kr
-AddCharset KOI8-R .koi8-r
-AddCharset UCS-2 .ucs2
-AddCharset UCS-4 .ucs4
-AddCharset UTF-8 .utf8
-AddCharset WINDOWS-1251 .cp-1251
-
-#
-# LanguagePriority allows you to give precedence to some languages
-# in case of a tie during content negotiation.
-# Just list the languages in decreasing order of preference.
-#
-LanguagePriority en pl fr de
-
-#
-# AddType allows you to tweak mime.types without actually editing it, or to
-# make certain files to be certain types.
-#
-# For example, the PHP 3.x module (not part of the Apache distribution - see
-# http://www.php.net) will typically use:
-#
-#AddType application/x-httpd-php3 .php3
-#AddType application/x-httpd-php3-source .phps
-#
-# And for PHP 4.x, use:
-#
-#AddType application/x-httpd-php .php
-#AddType application/x-httpd-php-source .phps
-#
-#AddType application/x-tar .tgz
-
-#
-# AddHandler allows you to map certain file extensions to "handlers",
-# actions unrelated to filetype. These can be either built into the server
-# or added with the Action command (see below)
-#
-# If you want to use server side includes, or CGI outside
-# ScriptAliased directories, uncomment the following lines.
-#
-# To use CGI scripts:
-#
-AddHandler cgi-script .cgi
+User http
+Group http
-#
-# To use server-parsed HTML files
-#
-AddType text/html .shtml
-AddHandler server-parsed .shtml
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents.
+ServerAdmin root@localhost
-#
-# Uncomment the following line to enable Apache's send-asis HTTP file
-# feature
-#
-AddHandler send-as-is asis
+#ServerName localhost
-#
-# If you wish to use server-parsed imagemap files, use
-#
-AddHandler imap-file map
+# Include other modules and packages config.
+Include conf.d/*.conf
-#
-# To enable type maps, you might want to use
-#
-AddHandler type-map var
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
+###
+### IP Address/Port
+###
+#BindAddress *
+Listen 80
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-MetaDir .web
+###
+### Performance settings Section
+###
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-MetaSuffix .meta
+### Timeout
+# The number of seconds before receives and sends time out.
+Timeout 300
-#
-# Customizable error response (Apache style)
-# these come in three flavors
-#
-# 1) plain text
-#ErrorDocument 500 "The server made a boo boo.
-# n.b. the single leading (") marks it as text, it does not get output
-#
-# 2) local redirects
-#ErrorDocument 404 /missing.html
-# to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-# N.B.: You can redirect to a script or a document using server-side-includes.
-#
-# 3) external redirects
-#ErrorDocument 402 http://some.other-server.com/subscription_info.html
-# N.B.: Many of the environment variables associated with the original
-# request will *not* be available to such a script.
+### KeepAlive
+# Whether or not to allow persistent connections (more than one request per
+# connection). Set to "Off" to deactivate.
+KeepAlive On
-Alias /errordocs/ "/home/services/apache/errordocs/"
+### MaxKeepAliveRequests
+# The maximum number of requests to allow during a persistent connection.
+# Set to 0 to allow an unlimited amount. We recommend you leave this number
+# high, for maximum performance.
-<Directory /home/services/apache/errordocs/>
- AllowOverride none
- Options IncludesNoExec FollowSymLinks
-</Directory>
+MaxKeepAliveRequests 100
-ErrorDocument 400 /errordocs/400.shtml
-ErrorDocument 401 /errordocs/401.shtml
-ErrorDocument 403 /errordocs/403.shtml
-ErrorDocument 404 /errordocs/404.shtml
-ErrorDocument 405 /errordocs/405.shtml
-ErrorDocument 406 /errordocs/406.shtml
-ErrorDocument 408 /errordocs/408.shtml
-ErrorDocument 410 /errordocs/410.shtml
-ErrorDocument 411 /errordocs/411.shtml
-ErrorDocument 414 /errordocs/414.shtml
-ErrorDocument 500 /errordocs/500.shtml
-ErrorDocument 503 /errordocs/503.shtml
+### KeepAliveTimeout
+# Number of seconds to wait for the next request from the same client on the
+# same connection.
-# The following directives modify normal HTTP response behavior.
-# The first directive disables keepalive for Netscape 2.x and browsers that
-# spoof it. There are known problems with these browser implementations.
-# The second directive is for Microsoft Internet Explorer 4.0b2
-# which has a broken HTTP/1.1 implementation and does not properly
-# support keepalive when it is used on 301 or 302 (redirect) responses.
-#
-BrowserMatch "Mozilla/2" nokeepalive
-BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+KeepAliveTimeout 15
-#
-# The following directive disables HTTP/1.1 responses to browsers which
-# are in violation of the HTTP/1.0 spec by not being able to grok a
-# basic 1.1 response.
-#
-BrowserMatch "RealPlayer 4\.0" force-response-1.0
-BrowserMatch "Java/1\.0" force-response-1.0
-BrowserMatch "JDK/1\.0" force-response-1.0
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+StartServers 5
+MinSpareServers 5
+MaxSpareServers 10
+MaxClients 150
+MaxRequestsPerChild 30
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".your-domain.com" to match your domain to enable.
-#
-#<Location /server-info>
-# SetHandler server-info
-# Order deny,allow
-# Deny from all
-# Allow from .your-domain.com
-#</Location>
+# These lines here are for packages which still use apxs to activate module.
+# LoadModule access_module modules/mod_access.so
+# AddModule mod_foo.c
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days. This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging
-# script on phf.apache.org. Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-# Deny from all
-# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
+# vim: filetype=apache ts=4 sw=4 et
projects / packages / apache1.git / commitdiff