[packages/apache.git] / apache-httpd.conf

# This is the main Apache HTTP server configuration file.
# It contains the configuration directives that give the server its instructions.
#
# This config aims to be clean and readable.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.

ServerRoot "/etc/httpd"

LoadModule unixd_module modules/mod_unixd.so


# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 192.168.1.1:80
Listen 80

# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@example.com
#
ServerAdmin root@example.com

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log

# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn

Timeout 60
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 5
UseCanonicalName Off
AccessFileName .htaccess
ServerTokens Prod
ServerSignature On
HostnameLookups Off
#AddDefaultCharset UTF-8

TraceEnable Off

#
# EnableMMAP and EnableSendfile: On systems that support it, memory-mapping or
# the sendfile syscall may be used to deliver files.
# This usually improves server performance, but must be turned off when serving
# from networked-mounted filesystems or if support for these functions is
# otherwise broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on

# Include other modules and packages config.
IncludeOptional conf.d/*.conf

# Include webapps config
IncludeOptional webapps.d/*.conf

#
# Set a timeout for how long the client may take to send the request header
# and body.
# The default for the headers is header=20-40,MinRate=500, which means wait
# for the first byte of headers for 20 seconds. If some data arrives,
# increase the timeout corresponding to a data rate of 500 bytes/s, but not
# above 40 seconds.
# The default for the request body is body=20,MinRate=500, which is the same
# but has no upper limit for the timeout.
# To disable, set to header=0 body=0
#
<IfModule reqtimeout_module>
	RequestReadTimeout header=20-40,MinRate=500 body=20,MinRate=500
</IfModule>

<IfModule alias_module>
	# ScriptAlias: This controls which directories contain server scripts.
	# ScriptAliases are essentially the same as Aliases, except that
	# documents in the target directory are treated as applications and
	# run by the server when requested rather than as documents sent to the
	# client. The same rules about trailing "/" apply to ScriptAlias
	# directives as to Alias.
	#
	ScriptAlias /cgi-bin/ "/home/services/httpd/cgi-bin/"

	<Directory "/home/services/httpd/cgi-bin">
		AllowOverride None
		Options None
		<IfModule mod_authz_host.c>
			Require all granted
		</IfModule>
		<IfModule mod_access_compat.c>
			Order allow,deny
			Allow from all
		</IfModule>
	</Directory>
</IfModule>

# VirtualHost: Allows the daemon to respond to requests for more than one
# server address, if your server machine is configured to accept IP packets
# for multiple addresses. This can be accomplished with the ifconfig
# alias flag, or through kernel patches like VIF.

# Any apache.conf conf directive may go into a VirtualHost command.
# See also the BindAddress entry.

# Setup default vhost (first one defined in config) and include vhosts configuration
<VirtualHost *:80>
	ServerName localhost
#	ServerAdmin webmaster@host.example.com
#	DocumentRoot /www/docs/host.example.com
#	ErrorLog logs/host.example.com-error_log
#	TransferLog logs/host.example.com-access_log
</VirtualHost>

IncludeOptional vhosts.d/*.conf
Commit	Line	Data
	1	# This is the main Apache HTTP server configuration file.
	2	# It contains the configuration directives that give the server its instructions.
	3	#
	4	# This config aims to be clean and readable.
	5	# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
	6	# In particular, see
	7	# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
	8	# for a discussion of each configuration directive.
	9
	10	ServerRoot "/etc/httpd"
	11
	12	LoadModule unixd_module modules/mod_unixd.so
	13
	14
	15	# User/Group: The name (or #number) of the user/group to run httpd as.
	16	# It is usually good practice to create a dedicated user and group for
	17	# running httpd, as with most system services.
	18	User http
	19	Group http
	20
	21	# Listen: Allows you to bind Apache to specific IP addresses and/or
	22	# ports, instead of the default. See also the <VirtualHost>
	23	# directive.
	24	#
	25	# Change this to Listen on specific IP addresses as shown below to
	26	# prevent Apache from glomming onto all bound IP addresses.
	27	#Listen 192.168.1.1:80
	28	Listen 80
	29
	30	# ServerAdmin: Your address, where problems with the server should be
	31	# e-mailed. This address appears on some server-generated pages, such
	32	# as error documents. e.g. admin@example.com
	33	#
	34	ServerAdmin root@example.com
	35
	36	# ServerName gives the name and port that the server uses to identify itself.
	37	# This can often be determined automatically, but we recommend you specify
	38	# it explicitly to prevent problems during startup.
	39	#
	40	# If your host doesn't have a registered DNS name, enter its IP address here.
	41	#
	42	ServerName localhost
	43
	44	# ErrorLog: The location of the error log file.
	45	# If you do not specify an ErrorLog directive within a <VirtualHost>
	46	# container, error messages relating to that virtual host will be
	47	# logged here. If you do define an error logfile for a <VirtualHost>
	48	# container, that host's errors will be logged there and not here.
	49	ErrorLog logs/error_log
	50
	51	# LogLevel: Control the number of messages logged to the error_log.
	52	# Possible values include: debug, info, notice, warn, error, crit,
	53	# alert, emerg.
	54	LogLevel warn
	55
	56	Timeout 60
	57	KeepAlive On
	58	MaxKeepAliveRequests 100
	59	KeepAliveTimeout 5
	60	UseCanonicalName Off
	61	AccessFileName .htaccess
	62	ServerTokens Prod
	63	ServerSignature On
	64	HostnameLookups Off
	65	#AddDefaultCharset UTF-8
	66
	67	TraceEnable Off
	68
	69	#
	70	# EnableMMAP and EnableSendfile: On systems that support it, memory-mapping or
	71	# the sendfile syscall may be used to deliver files.
	72	# This usually improves server performance, but must be turned off when serving
	73	# from networked-mounted filesystems or if support for these functions is
	74	# otherwise broken on your system.
	75	# Defaults if commented: EnableMMAP On, EnableSendfile Off
	76	#
	77	#EnableMMAP off
	78	EnableSendfile on
	79
	80	# Include other modules and packages config.
	81	IncludeOptional conf.d/*.conf
	82
	83	# Include webapps config
	84	IncludeOptional webapps.d/*.conf
	85
	86	#
	87	# Set a timeout for how long the client may take to send the request header
	88	# and body.
	89	# The default for the headers is header=20-40,MinRate=500, which means wait
	90	# for the first byte of headers for 20 seconds. If some data arrives,
	91	# increase the timeout corresponding to a data rate of 500 bytes/s, but not
	92	# above 40 seconds.
	93	# The default for the request body is body=20,MinRate=500, which is the same
	94	# but has no upper limit for the timeout.
	95	# To disable, set to header=0 body=0
	96	#
	97	<IfModule reqtimeout_module>
	98	RequestReadTimeout header=20-40,MinRate=500 body=20,MinRate=500
	99	</IfModule>
	100
	101	<IfModule alias_module>
	102	# ScriptAlias: This controls which directories contain server scripts.
	103	# ScriptAliases are essentially the same as Aliases, except that
	104	# documents in the target directory are treated as applications and
	105	# run by the server when requested rather than as documents sent to the
	106	# client. The same rules about trailing "/" apply to ScriptAlias
	107	# directives as to Alias.
	108	#
	109	ScriptAlias /cgi-bin/ "/home/services/httpd/cgi-bin/"
	110
	111	<Directory "/home/services/httpd/cgi-bin">
	112	AllowOverride None
	113	Options None
	114	<IfModule mod_authz_host.c>
	115	Require all granted
	116	</IfModule>
	117	<IfModule mod_access_compat.c>
	118	Order allow,deny
	119	Allow from all
	120	</IfModule>
	121	</Directory>
	122	</IfModule>
	123
	124	# VirtualHost: Allows the daemon to respond to requests for more than one
	125	# server address, if your server machine is configured to accept IP packets
	126	# for multiple addresses. This can be accomplished with the ifconfig
	127	# alias flag, or through kernel patches like VIF.
	128
	129	# Any apache.conf conf directive may go into a VirtualHost command.
	130	# See also the BindAddress entry.
	131
	132	# Setup default vhost (first one defined in config) and include vhosts configuration
	133	<VirtualHost *:80>
	134	ServerName localhost
	135	# ServerAdmin webmaster@host.example.com
	136	# DocumentRoot /www/docs/host.example.com
	137	# ErrorLog logs/host.example.com-error_log
	138	# TransferLog logs/host.example.com-access_log
	139	</VirtualHost>
	140
	141	IncludeOptional vhosts.d/*.conf