# $Id$
-LoadModule ssl_module modules/mod_ssl.so
+LoadModule ssl_module modules/mod_ssl.so
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
-# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
+# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443
## the main server and all SSL-enabled virtual hosts.
##
-#
-# Some MIME-types for downloading Certificates and CRLs
-#
-AddType application/x-x509-ca-cert .crt
-AddType application/x-pkcs7-crl .crl
-
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
-#SSLSessionCache dbm:/var/run/ssl_scache
-SSLSessionCache shmcb:/var/run/ssl_scache(512000)
+#SSLSessionCache dbm:/var/cache/httpd/ssl_scache
+#SSLSessionCache shmcb:/var/run/ssl_scache(512000)
+SSLSessionCache shmcb:/var/cache/httpd/ssl_scache(512000)
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
-SSLMutex file:/var/run/ssl_mutex
+SSLMutex file:/var/run/httpd/ssl_mutex
##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>
-
-# General setup for the virtual host
-DocumentRoot "/home/services/httpd/html"
-ServerName www.example.com:443
-ServerAdmin you@example.com
-ErrorLog logs/error_log
-TransferLog logs/access_log
-
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
-# to point to the certificate files. Use the provided
-# Makefile to update the hash symlinks after changes.
+# to point to the certificate files. Use the provided
+# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/ssl
#SSLCACertificateFile /etc/httpd/ssl/ca-bundle.crt
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
-# to point to the certificate files. Use the provided
-# Makefile to update the hash symlinks after changes.
+# to point to the certificate files. Use the provided
+# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/ssl
#SSLCARevocationFile /etc/httpd/ssl/ca-bundle.crl
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
-#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
-# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
-# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
-# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
-# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
-# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
+# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
-# Translate the client X.509 into a Basic Authorisation. This means that
-# the standard Auth/DBMAuth methods can be used for access control. The
-# user name is the `one line' version of the client's X.509 certificate.
-# Note that no password is obtained from the user. Every entry in the user
-# file needs this password: `xxj31ZMTZzkVA'.
+# Translate the client X.509 into a Basic Authorisation. This means that
+# the standard Auth/DBMAuth methods can be used for access control. The
+# user name is the `one line' version of the client's X.509 certificate.
+# Note that no password is obtained from the user. Every entry in the user
+# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
-# This exports two additional environment variables: SSL_CLIENT_CERT and
-# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
-# server (always existing) and the client (only existing when client
-# authentication is used). This can be used to import the certificates
-# into CGI scripts.
+# This exports two additional environment variables: SSL_CLIENT_CERT and
+# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+# server (always existing) and the client (only existing when client
+# authentication is used). This can be used to import the certificates
+# into CGI scripts.
# o StdEnvVars:
-# This exports the standard SSL/TLS related `SSL_*' environment variables.
-# Per default this exportation is switched off for performance reasons,
-# because the extraction step is an expensive operation and is usually
-# useless for serving static content. So one usually enables the
-# exportation for CGI and SSI requests only.
+# This exports the standard SSL/TLS related `SSL_*' environment variables.
+# Per default this exportation is switched off for performance reasons,
+# because the extraction step is an expensive operation and is usually
+# useless for serving static content. So one usually enables the
+# exportation for CGI and SSI requests only.
# o StrictRequire:
-# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
-# under a "Satisfy any" situation, i.e. when it applies access is denied
-# and no other module can change it.
+# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+# under a "Satisfy any" situation, i.e. when it applies access is denied
+# and no other module can change it.
# o OptRenegotiate:
-# This enables optimized SSL connection renegotiation handling when SSL
-# directives are used in per-directory context.
+# This enables optimized SSL connection renegotiation handling when SSL
+# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
+ SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/home/services/httpd/cgi-bin">
- SSLOptions +StdEnvVars
+ SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
-# This forces an unclean shutdown when the connection is closed, i.e. no
-# SSL close notify alert is send or allowed to received. This violates
-# the SSL/TLS standard but is needed for some brain-dead browsers. Use
-# this when you receive I/O errors because of the standard approach where
-# mod_ssl sends the close notify alert.
+# This forces an unclean shutdown when the connection is closed, i.e. no
+# SSL close notify alert is send or allowed to received. This violates
+# the SSL/TLS standard but is needed for some brain-dead browsers. Use
+# this when you receive I/O errors because of the standard approach where
+# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
-# This forces an accurate shutdown when the connection is closed, i.e. a
-# SSL close notify alert is send and mod_ssl waits for the close notify
-# alert of the client. This is 100% SSL/TLS standard compliant, but in
-# practice often causes hanging connections with brain-dead browsers. Use
-# this only for browsers where you know that their SSL implementation
-# works correctly.
+# This forces an accurate shutdown when the connection is closed, i.e. a
+# SSL close notify alert is send and mod_ssl waits for the close notify
+# alert of the client. This is 100% SSL/TLS standard compliant, but in
+# practice often causes hanging connections with brain-dead browsers. Use
+# this only for browsers where you know that their SSL implementation
+# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
-BrowserMatch ".*MSIE.*" \
- nokeepalive ssl-unclean-shutdown \
- downgrade-1.0 force-response-1.0
+<IfModule mod_setenvif.c>
+ BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
+</IfModule>
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
-CustomLog logs/ssl_request_log \
- "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+<IfModule mod_log_config.c>
+ CustomLog logs/ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+</IfModule>
</VirtualHost>
</IfModule>
-# vim: filetype=apache ts=4 sw=4 et