projects / packages / VMware-server.git / blame
| Commit | Line | Data |
|---|---|---|
| c73b4e92 MM |
1 | # Linux NAT configuration file |
| 2 | [host] | |
| 3 | # NAT gateway address | |
| 4 | ip = 192.168.76.2 | |
| 5 | netmask = 255.255.255.0 | |
| 6 | # or ip = 192.168.76.2/24 | |
| 7 | ||
| 8 | # enable configuration; disabled by default for security reasons | |
| 9 | #configport = 33445 | |
| 10 | ||
| 11 | # VMnet device if not specified on command line | |
| 12 | device = /dev/vmnet8 | |
| 13 | ||
| 14 | # Allow PORT/EPRT FTP commands (they need incoming TCP stream...) | |
| 15 | activeFTP = 1 | |
| 16 | ||
| 17 | # Allows the source to have any OUI. Turn this one if you change the OUI | |
| 18 | # in the MAC address of your virtual machines. | |
| 19 | #allowAnyOUI = 1 | |
| 20 | ||
| 21 | [udp] | |
| 22 | # Timeout in seconds, 0 = no timeout, default = 60; real value might | |
| 23 | # be up to 100% longer | |
| 24 | timeout = 60 | |
| 25 | ||
| 26 | [incomingtcp] | |
| 27 | # Use these with care - anyone can enter into your VM through these... | |
| 28 | ||
| 29 | # FTP (both active and passive FTP is always enabled) | |
| 30 | # ftp localhost 8887 | |
| 31 | #8887 = 192.168.76.128:21 | |
| 32 | ||
| 33 | # WEB (make sure that if you are using named webhosting, names point to | |
| 34 | # your host, not to guest... And if you are forwarding port other | |
| 35 | # than 80 make sure that your server copes with mismatched port | |
| 36 | # number in Host: header) | |
| 37 | # lynx http://localhost:8888 | |
| 38 | #8888 = 192.168.76.128:80 | |
| 39 | ||
| 40 | # SSH | |
| 41 | # ssh -p 8889 root@localhost | |
| 42 | #8889 = 192.168.76.128:22 | |
| 43 | ||
| 44 | [incomingudp] | |
| 45 | # UDP port forwarding example | |
| 46 | #6000 = 192.168.76.128:6001 |