Summary:	x86 CPU Microcode Utility
Summary(pl.UTF-8):	Aktualizator mikrokodu procesorów architektury x86
Name:		microcode_ctl
Version:	1.17
Release:	9
Epoch:		1
License:	GPL
Group:		Base
Source0:	http://www.urbanmyth.org/microcode/%{name}-%{version}.tar.gz
# Source0-md5:	98a7f06acef8459c8ef2a1b0fb86a99e
Source1:	%{name}.init
URL:		http://www.urbanmyth.org/microcode/
Requires(post,preun):	/sbin/chkconfig
Requires:	rc-scripts >= 0.4.3.0
Requires:	uname(release) >= 2.6.20
ExclusiveArch:	i686 pentium2 pentium3 pentium4 %{x8664}
BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)

%description
The microcode_ctl utility is a companion to the x86 microcode driver.
The utility has two uses: a) it decodes and sends new microcode to the
kernel driver to be uploaded to Intel IA32 or AMD64 family processors.
(Pentium Pro, PII, Celeron, PIII, Xeon Pentium 4 etc.) b) it signals
the kernel driver to release any buffers it may hold.

The microcode update is volatile and needs to be uploaded on each
system boot i.e. it doesn't reflash your cpu permanently, reboot and
it reverts back to the old microcode.

%description -l pl.UTF-8
Narzędzie będące dodatkiem do sterownika mikrokodu x86. Program
dekoduje i wysyła nowy mikrokod do jądra systemu w celu załadowania go
do jednego z procesorów rodziny IA32 (Pentium Pro, PII, Celeron, PIII,
Xeon, Pentium 4 itd.) oraz AMD64. Ponadto wysyłany jest sygnał do
jądra by to zwolniło wszystkie bufory.

Aktualizacja mikrokodu musi być dokonywana po każdym restarcie systemu
tzn. nie jest to trwała aktualizacja. Po restarcie procesor zawiera
stary mikrokod.

%prep
%setup -q

%build
%{__cc} %{rpmldflags} %{rpmcflags} %{rpmcppflags} -Wall \
	microcode_ctl.c -o microcode_ctl

%install
rm -rf $RPM_BUILD_ROOT
install -d $RPM_BUILD_ROOT{/etc/rc.d/init.d,%{_sysconfdir},%{_sbindir},%{_mandir}/man8}
install	-p %{name} $RPM_BUILD_ROOT%{_sbindir}
cp -p %{name}.8 $RPM_BUILD_ROOT%{_mandir}/man8
install -p %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/%{name}

%clean
rm -rf $RPM_BUILD_ROOT

%post
/sbin/chkconfig --add %{name}

%preun
if [ "$1" = "0" ]; then
	/sbin/chkconfig --del %{name}
fi

%files
%defattr(644,root,root,755)
%doc Changelog README
%attr(754,root,root) /etc/rc.d/init.d/%{name}
%attr(755,root,root) %{_sbindir}/microcode_ctl
%{_mandir}/man8/microcode_ctl.8*