From c9d0fed00cfa1583adcda97d8092e670a7ba4e26 Mon Sep 17 00:00:00 2001
From: Jakub Bogusz <qboosh@pld-linux.org>
Date: Tue, 3 Feb 2015 21:57:18 +0100
Subject: [PATCH] - updated to 0.020 - pl

---
 perl-Test-Warnings.spec | 78 ++++++++++++++++++++---------------------
 1 file changed, 38 insertions(+), 40 deletions(-)

diff --git a/perl-Test-Warnings.spec b/perl-Test-Warnings.spec
index f2efa26..1d7cc2c 100644
--- a/perl-Test-Warnings.spec
+++ b/perl-Test-Warnings.spec
@@ -6,71 +6,69 @@
 %define		pnam	Warnings
 %include	/usr/lib/rpm/macros.perl
 Summary:	Test::Warnings - Test for warnings and the lack of them
-#Summary(pl.UTF-8):	
+Summary(pl.UTF-8):	Test::Warnings - testowanie pod kątem ostrzeżeń i ich braku
 Name:		perl-Test-Warnings
-Version:	0.013
+Version:	0.020
 Release:	1
-# same as perl
+# same as perl 5
 License:	GPL v1+ or Artistic
 Group:		Development/Languages/Perl
 Source0:	http://www.cpan.org/modules/by-module/Test/%{pdir}-%{pnam}-%{version}.tar.gz
-# Source0-md5:	417033144b2fc373830a3547e9f96fab
+# Source0-md5:	c5d923fd727fea3f4b3aa91bad5ccf47
 URL:		http://search.cpan.org/dist/Test-Warnings/
-BuildRequires:	perl-Module-Build-Tiny
 BuildRequires:	perl-devel >= 1:5.8.0
 BuildRequires:	rpm-perlprov >= 4.1-13
 %if %{with tests}
-BuildRequires:	perl-Test-Tester >= 0.108
 BuildRequires:	perl-Test-Deep
+BuildRequires:	perl-Test-Simple >= 0.94
+BuildRequires:	perl-Test-Tester >= 0.108
 %endif
 BuildArch:	noarch
 BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)
 
 %description
-If you've ever tried to use Test::NoWarnings to confirm there are no warnings
-generated by your tests, combined with the convenience of done_testing to
-not have to declare a
-test count,
-you'll have discovered that these two features do not play well together,
-as the test count will be calculated before the warnings test is run,
-resulting in a TAP error. (See examples/test_nowarnings.pl in this
-distribution for a demonstration.)
+If you've ever tried to use Test::NoWarnings to confirm there are no
+warnings generated by your tests, combined with the convenience of
+done_testing to not have to declare a test count, you'll have
+discovered that these two features do not play well together, as the
+test count will be calculated before the warnings test is run,
+resulting in a TAP error.
 
 This module is intended to be used as a drop-in replacement for
-Test::NoWarnings: it also adds an extra test, but runs this test before
-done_testing calculates the test count, rather than after.  It does this by
-hooking into done_testing as well as via an END block.  You can declare
-a plan, or not, and things will still Just Work.
-
-It is actually equivalent to:
-
-    use Test::NoWarnings 1.04 ':early';
-
-as warnings are still printed normally as they occur.  You are safe, and
-enthusiastically encouraged, to perform a global search-replace of the above
-with use Test::Warnings; whether or not your tests have a plan.
-
-
-
-# %description -l pl.UTF-8
-# TODO
+Test::NoWarnings: it also adds an extra test, but runs this test
+before done_testing calculates the test count, rather than after. It
+does this by hooking into done_testing as well as via an END block.
+You can declare a plan, or not, and things will still Just Work.
+
+%description -l pl.UTF-8
+Przy próbie użycia Test::NoWarnings w celu upewnienia się, że testy
+nie generują ostrzeżeń w połączeniu z wygodą done_testing, aby nie
+trzeba było deklarować liczby testów, okazuje się, że udogodnienia te
+nie współpracują dobrze ze sobą - liczba testów jest obliczana przed
+uruchomieniem testu ostrzeżeń, czego wynikiem jest błąd TAP.
+
+Ten moduł jest pomyślany jako zamiennik Test::Nowarnings - także
+dodaje dodatkowy test, ale uruchamia go zanim done_testing obliczy
+liczbę testów, a nie po tym. Robi to przez wstawienie w done_testing,
+a także poprzez blok END. Można zadeklarować plan lub nie, a wszystko
+będzie po prostu działać.
 
 %prep
 %setup -q -n %{pdir}-%{pnam}-%{version}
 
 %build
-%{__perl} Build.PL \
-	--installdirs=vendor
-./Build
+%{__perl} Makefile.PL \
+	INSTALLDIRS=vendor
+
+%{__make}
 
-%{?with_tests:./Build test}
+%{?with_tests:%{__make} test}
 
 %install
 rm -rf $RPM_BUILD_ROOT
 
-./Build install \
-	--destdir=$RPM_BUILD_ROOT \
-	--create_packlist=0
+%{__make} pure_install \
+	DESTDIR=$RPM_BUILD_ROOT
 
 install -d $RPM_BUILD_ROOT%{_examplesdir}/%{name}-%{version}
 cp -a examples $RPM_BUILD_ROOT%{_examplesdir}/%{name}-%{version}
@@ -80,7 +78,7 @@ rm -rf $RPM_BUILD_ROOT
 
 %files
 %defattr(644,root,root,755)
-%doc Changes INSTALL README
+%doc CONTRIBUTING Changes README
 %{perl_vendorlib}/Test/Warnings.pm
-%{_mandir}/man3/*
+%{_mandir}/man3/Test::Warnings.3pm*
 %{_examplesdir}/%{name}-%{version}
-- 
2.44.0