- fix paths to mtools.conf in man pages for mtools.

Changed files:
    mtools-paths.patch -> 1.1

diff --git a/mtools-paths.patch b/mtools-paths.patch
new file mode 100644 (file)
index 0000000..f5986bb
--- /dev/null
+++ b/mtools-paths.patch
@@ -0,0 +1,129 @@
+--- mtools-3.9.6/mtools.5.paths        Wed Feb  9 11:35:43 2000
++++ mtools-3.9.6/mtools.5      Wed Feb  9 11:36:39 2000
+@@ -20,7 +20,7 @@
+ .SS Description
+ .PP
+ This manpage describes the configuration files for mtools. They 
+-are called \fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR and \fR\&\f(CW\(if~/.mtoolsrc\(is\fR. If
++are called \fR\&\f(CW\(if/etc/mtools.conf\(is\fR and \fR\&\f(CW\(if~/.mtoolsrc\(is\fR. If
+ the environmental variable \fR\&\f(CWMTOOLSRC\fR is set, its contents is used
+ as the filename for a third configuration file. These configuration
+ files describe the following items:
+@@ -37,7 +37,7 @@
+ .iX "c Name of configuration files"
+ .iX "c Location of configuration files"
+ .PP
+-\&\fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR is the system-wide configuration file,
++\&\fR\&\f(CW\(if/etc/mtools.conf\(is\fR is the system-wide configuration file,
+ and \fR\&\f(CW\(if~/.mtoolsrc\(is\fR is the user's private configuration file.
+ .PP
+ On some systems, the system-wide configuration file is called
+@@ -444,7 +444,7 @@
+ Mtools uses its root privileges to open the device, and to issue the
+ actual SCSI I/O calls.  Moreover, root privileges are only used for
+ drives described in a system-wide configuration file such as
+-\&\fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR, and not for those described in
++\&\fR\&\f(CW\(if/etc/mtools.conf\(is\fR, and not for those described in
+ \&\fR\&\f(CW\(if~/.mtoolsrc\(is\fR or \fR\&\f(CW\(if$MTOOLSRC\(is\fR.  
+ .TP
+ \&\fR\&\f(CWprivileged\fR\ 
+@@ -453,7 +453,7 @@
+ When set to 1, this instructs mtools to use its set-uid and set-gid
+ privileges for opening the given drive.  This option is only valid for
+ drives described in the system-wide configuration files (such as
+-\&\fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR, not \fR\&\f(CW\(if~/.mtoolsrc\(is\fR or
++\&\fR\&\f(CW\(if/etc/mtools.conf\(is\fR, not \fR\&\f(CW\(if~/.mtoolsrc\(is\fR or
+ \&\fR\&\f(CW\(if$MTOOLSRC\(is\fR).  Obviously, this option is also a no op if mtools is
+ not installed setuid or setgid.  This option is implied by 'scsi=1', but
+ again only for drives defined in system-wide configuration files.
+@@ -743,7 +743,7 @@
+ compiled-in defaults
+ .TP
+ 2.\ 
+-\&\fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR
++\&\fR\&\f(CW\(if/etc/mtools.conf\(is\fR
+ .TP
+ 3.\ 
+ \&\fR\&\f(CW\(if/etc/mtools\(is\fR
+@@ -761,10 +761,10 @@
+ Options described in the later files override those described in the
+ earlier files. Drives defined in earlier files persist if they are not
+ overridden in the later files. For instance, drives A and B may be
+-defined in \fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR and drives C and D may be
++defined in \fR\&\f(CW\(if/etc/mtools.conf\(is\fR and drives C and D may be
+ defined in \fR\&\f(CW\(if~/.mtoolsrc\(is\fR However, if \fR\&\f(CW\(if~/.mtoolsrc\(is\fR also
+ defines drive A, this new description would override the description of
+-drive A in \fR\&\f(CW\(if/usr/local/etc/mtools.conf\(is\fR instead of adding to it. If
++drive A in \fR\&\f(CW\(if/etc/mtools.conf\(is\fR instead of adding to it. If
+ you want to add a new description to a drive already described in an
+ earlier file, you need to use either the \fR\&\f(CW+drive\fR or \fR\&\f(CWdrive+\fR
+ keyword.
+--- mtools-3.9.6/mtools.texi.paths     Wed Feb  9 11:38:24 2000
++++ mtools-3.9.6/mtools.texi   Wed Feb  9 11:39:03 2000
+@@ -616,7 +616,7 @@
+  This sections explains the syntax of the configurations files for
+ mtools. The configuration files
+ @c MANend-skip 5
+-are called @file{/usr/local/etc/mtools.conf} and @file{~/.mtoolsrc}. If
++are called @file{/etc/mtools.conf} and @file{~/.mtoolsrc}. If
+ the environmental variable @code{MTOOLSRC} is set, its contents is used
+ as the filename for a third configuration file. These configuration
+ files describe the following items:
+@@ -646,7 +646,7 @@
+ @cindex Name of configuration files
+ @cindex Location of configuration files
+ 
+-@file{/usr/local/etc/mtools.conf} is the system-wide configuration file,
++@file{/etc/mtools.conf} is the system-wide configuration file,
+ and @file{~/.mtoolsrc} is the user's private configuration file.
+ 
+ On some systems, the system-wide configuration file is called
+@@ -1043,7 +1043,7 @@
+ Mtools uses its root privileges to open the device, and to issue the
+ actual SCSI I/O calls.  Moreover, root privileges are only used for
+ drives described in a system-wide configuration file such as
+-@file{/usr/local/etc/mtools.conf}, and not for those described in
++@file{/etc/mtools.conf}, and not for those described in
+ @file{~/.mtoolsrc} or @file{$MTOOLSRC}.  
+ 
+ @item privileged
+@@ -1052,7 +1052,7 @@
+ When set to 1, this instructs mtools to use its set-uid and set-gid
+ privileges for opening the given drive.  This option is only valid for
+ drives described in the system-wide configuration files (such as
+-@file{/usr/local/etc/mtools.conf}, not @file{~/.mtoolsrc} or
++@file{/etc/mtools.conf}, not @file{~/.mtoolsrc} or
+ @file{$MTOOLSRC}).  Obviously, this option is also a no op if mtools is
+ not installed setuid or setgid.  This option is implied by 'scsi=1', but
+ again only for drives defined in system-wide configuration files.
+@@ -1332,7 +1332,7 @@
+ @item
+ compiled-in defaults
+ @item
+-@file{/usr/local/etc/mtools.conf}
++@file{/etc/mtools.conf}
+ @item
+ @file{/etc/mtools}
+ This is for backwards compatibility only, and is only parsed if
+@@ -1348,10 +1348,10 @@
+ Options described in the later files override those described in the
+ earlier files. Drives defined in earlier files persist if they are not
+ overridden in the later files. For instance, drives A and B may be
+-defined in @file{/usr/local/etc/mtools.conf} and drives C and D may be
++defined in @file{/etc/mtools.conf} and drives C and D may be
+ defined in @file{~/.mtoolsrc} However, if @file{~/.mtoolsrc} also
+ defines drive A, this new description would override the description of
+-drive A in @file{/usr/local/etc/mtools.conf} instead of adding to it. If
++drive A in @file{/etc/mtools.conf} instead of adding to it. If
+ you want to add a new description to a drive already described in an
+ earlier file, you need to use either the @code{+drive} or @code{drive+}
+ keyword.
+@@ -2614,7 +2614,7 @@
+ same devices are found on a large number of hosts of this type. In that
+ case, could you also let me know about your new definitions, so that I
+ can include them into the next release.  For purely local file, I
+-recommend that you use the @code{/usr/local/etc/mtools.conf} and
++recommend that you use the @code{/etc/mtools.conf} and
+ @code{~/.mtoolsrc} configuration files.
+ 
+  However, the devices files also allows to supply geometry setting