+++ /dev/null
-# Universal Unix Makefile for Python extensions
-# =============================================
-
-# Short Instructions
-# ------------------
-
-# 1. Build and install Python (1.5 or newer).
-# 2. "make -f Makefile.pre.in boot"
-# 3. "make"
-# You should now have a shared library.
-
-# Long Instructions
-# -----------------
-
-# Build *and install* the basic Python 1.5 distribution. See the
-# Python README for instructions. (This version of Makefile.pre.in
-# only withs with Python 1.5, alpha 3 or newer.)
-
-# Create a file Setup.in for your extension. This file follows the
-# format of the Modules/Setup.in file; see the instructions there.
-# For a simple module called "spam" on file "spammodule.c", it can
-# contain a single line:
-# spam spammodule.c
-# You can build as many modules as you want in the same directory --
-# just have a separate line for each of them in the Setup.in file.
-
-# If you want to build your extension as a shared library, insert a
-# line containing just the string
-# *shared*
-# at the top of your Setup.in file.
-
-# Note that the build process copies Setup.in to Setup, and then works
-# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
-# while you're in the process of debugging your Setup.in file, you may
-# want to edit Setup instead, and copy it back to Setup.in later.
-# (All this is done so you can distribute your extension easily and
-# someone else can select the modules they actually want to build by
-# commenting out lines in the Setup file, without editing the
-# original. Editing Setup is also used to specify nonstandard
-# locations for include or library files.)
-
-# Copy this file (Misc/Makefile.pre.in) to the directory containing
-# your extension.
-
-# Run "make -f Makefile.pre.in boot". This creates Makefile
-# (producing Makefile.pre and sedscript as intermediate files) and
-# config.c, incorporating the values for sys.prefix, sys.exec_prefix
-# and sys.version from the installed Python binary. For this to work,
-# the python binary must be on your path. If this fails, try
-# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
-# where <prefix> is the prefix used to install Python for installdir
-# (and possibly similar for exec_installdir=<exec_prefix>).
-
-# Note: "make boot" implies "make clobber" -- it assumes that when you
-# bootstrap you may have changed platforms so it removes all previous
-# output files.
-
-# If you are building your extension as a shared library (your
-# Setup.in file starts with *shared*), run "make" or "make sharedmods"
-# to build the shared library files. If you are building a statically
-# linked Python binary (the only solution of your platform doesn't
-# support shared libraries, and sometimes handy if you want to
-# distribute or install the resulting Python binary), run "make
-# python".
-
-# Note: Each time you edit Makefile.pre.in or Setup, you must run
-# "make Makefile" before running "make".
-
-# Hint: if you want to use VPATH, you can start in an empty
-# subdirectory and say (e.g.):
-# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
-
-
-# === Bootstrap variables (edited through "make boot") ===
-
-# The prefix used by "make inclinstall libainstall" of core python
-installdir= /usr/local
-
-# The exec_prefix used by the same
-exec_installdir=$(installdir)
-
-# Source directory and VPATH in case you want to use VPATH.
-# (You will have to edit these two lines yourself -- there is no
-# automatic support as the Makefile is not generated by
-# config.status.)
-srcdir= .
-VPATH= .
-
-# === Variables that you may want to customize (rarely) ===
-
-# (Static) build target
-TARGET= python
-
-# Installed python binary (used only by boot target)
-PYTHON= python
-
-# Add more -I and -D options here
-CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
-
-# These two variables can be set in Setup to merge extensions.
-# See example[23].
-BASELIB=
-BASESETUP=
-
-# === Variables set by makesetup ===
-
-MODOBJS= _MODOBJS_
-MODLIBS= _MODLIBS_
-
-# === Definitions added by makesetup ===
-
-# === Variables from configure (through sedscript) ===
-
-VERSION= @VERSION@
-CC= @CC@
-LINKCC= @LINKCC@
-SGI_ABI= @SGI_ABI@
-OPT= @OPT@
-LDFLAGS= @LDFLAGS@
-DEFS= @DEFS@
-LIBS= @LIBS@
-LIBM= @LIBM@
-LIBC= @LIBC@
-RANLIB= @RANLIB@
-MACHDEP= @MACHDEP@
-SO= @SO@
-LDSHARED= @LDSHARED@
-CCSHARED= @CCSHARED@
-LINKFORSHARED= @LINKFORSHARED@
-#@SET_CCC@
-
-# Install prefix for architecture-independent files
-prefix= /usr/local
-
-# Install prefix for architecture-dependent files
-exec_prefix= $(prefix)
-
-# === Fixed definitions ===
-
-# Shell used by make (some versions default to the login shell, which is bad)
-SHELL= /bin/sh
-
-# Expanded directories
-BINDIR= $(exec_installdir)/bin
-LIBDIR= $(exec_prefix)/lib
-MANDIR= $(installdir)/man
-INCLUDEDIR= $(installdir)/include
-SCRIPTDIR= $(prefix)/lib
-
-# Detailed destination directories
-BINLIBDEST= $(LIBDIR)/python$(VERSION)
-LIBDEST= $(SCRIPTDIR)/python$(VERSION)
-INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
-EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
-LIBP= $(exec_installdir)/lib/python$(VERSION)
-DESTSHARED= $(BINLIBDEST)/site-packages
-
-LIBPL= $(LIBP)/config
-
-PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
-
-MAKESETUP= $(LIBPL)/makesetup
-MAKEFILE= $(LIBPL)/Makefile
-CONFIGC= $(LIBPL)/config.c
-CONFIGCIN= $(LIBPL)/config.c.in
-SETUP= $(LIBPL)/Setup
-
-SYSLIBS= $(LIBM) $(LIBC)
-
-ADDOBJS= $(LIBPL)/python.o config.o
-
-# Portable install script (configure doesn't always guess right)
-INSTALL= $(LIBPL)/install-sh -c
-# Shared libraries must be installed with executable mode on some systems;
-# rather than figuring out exactly which, we always give them executable mode.
-# Also, making them read-only seems to be a good idea...
-INSTALL_SHARED= ${INSTALL} -m 555
-
-# === Fixed rules ===
-
-# Default target. This builds shared libraries only
-default: sharedmods
-
-# Build everything
-all: static sharedmods
-
-# Build shared libraries from our extension modules
-sharedmods: $(SHAREDMODS)
-
-# Build a static Python binary containing our extension modules
-static: $(TARGET)
-$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
- $(CC) $(LDFLAGS) $(ADDOBJS) lib.a $(PYTHONLIBS) \
- $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
- -o $(TARGET)
-
-install: sharedmods
- if test ! -d $(DESTSHARED) ; then \
- mkdir $(DESTSHARED) ; else true ; fi
- -for i in X $(SHAREDMODS); do \
- if test $$i != X; \
- then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
- fi; \
- done
-
-# Build the library containing our extension modules
-lib.a: $(MODOBJS)
- -rm -f lib.a
- ar cr lib.a $(MODOBJS)
- -$(RANLIB) lib.a
-
-# This runs makesetup *twice* to use the BASESETUP definition from Setup
-config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
- $(MAKE) -f Makefile do-it-again
-
-# Internal target to run makesetup for the second time
-do-it-again:
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
-
-# Make config.o from the config.c created by makesetup
-config.o: config.c
- $(CC) $(CFLAGS) -c config.c
-
-# Setup is copied from Setup.in *only* if it doesn't yet exist
-Setup:
- cp $(srcdir)/Setup.in Setup
-
-# Make the intermediate Makefile.pre from Makefile.pre.in
-Makefile.pre: Makefile.pre.in sedscript
- sed -f sedscript $(srcdir)/Makefile.pre.in >Makefile.pre
-
-# Shortcuts to make the sed arguments on one line
-P=prefix
-E=exec_prefix
-H=Generated automatically from Makefile.pre.in by sedscript.
-L=LINKFORSHARED
-
-# Make the sed script used to create Makefile.pre from Makefile.pre.in
-sedscript: $(MAKEFILE)
- sed -n \
- -e '1s/.*/1i\\/p' \
- -e '2s%.*%# $H%p' \
- -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
- -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
- -e '/^CCC=/s/^CCC=[ ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
- -e '/^LINKCC=/s/^LINKCC=[ ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
- -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
- -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
- -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
- -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
- -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
- -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
- -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
- -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
- -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
- -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
- -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
- -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
- -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
- -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
- $(MAKEFILE) >sedscript
- echo "/^#@SET_CCC@/d" >>sedscript
- echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
- echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
- echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
- echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
- echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
- echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
- echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
-
-# Bootstrap target
-boot: clobber
- VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
- installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
- exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
- $(MAKE) -f $(srcdir)/Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
- VERSION=$$VERSION \
- installdir=$$installdir \
- exec_installdir=$$exec_installdir \
- Makefile
-
-# Handy target to remove intermediate files and backups
-clean:
- -rm -f *.o *~
-
-# Handy target to remove everything that is easily regenerated
-clobber: clean
- -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
- -rm -f *.so *.sl so_locations
-
-
-# Handy target to remove everything you don't want to distribute
-distclean: clobber
- -rm -f Makefile Setup
projects / packages / python-PyGreSQL.git / blobdiff