[packages/alarmwatch.git] / alarmwatch.init

#!/bin/sh
#
# alarmwatch	watches for lm_sensors alarms
#
# chkconfig:	2345  32 68
#
# description:	watches lm_sensors and beeps on aparms
#
# $Id$

# Source function library
. /etc/rc.d/init.d/functions

# Set defaults
CHIPS=""
PIDFILE=/var/run/alarmwatch.pid
SENSORS_SETUP=no
ALARMOPTIONS=""

# Get service config - may override defaults
[ -f /etc/sysconfig/alarmwatch ] && . /etc/sysconfig/alarmwatch

RETVAL=0
# See how we were called.
case "$1" in
  start)
	# Check if the service is already running?
	if [ ! -f /var/lock/subsys/alarmwatch ]; then
		if [ -z "$CHIPS" ]; then
			nls "alarmwatch not configured (CHIPS not set), cannot start."
			exit 6
		fi
		if [ "$SENSORS_SETUP" = "yes" ]; then
			# setup sensors limits, etc.
			sensors -s
		fi
		# read from sensors to clear out any alarms caused by previous limits...
		sensors > /dev/null
		msg_starting alarmwatch
		daemon alarmwatch -p "$PIDFILE" $CHIPS $ALARMOPTIONS
		RETVAL=$?
		[ $RETVAL -eq 0 ] && touch /var/lock/subsys/alarmwatch
	else
		msg_already_running alarmwatch
	fi
	;;
  stop)
	# Stop daemons.
	if [ -f /var/lock/subsys/alarmwatch ]; then
		msg_stopping alarmwatch
		killproc alarmwatch
		rm -f /var/lock/subsys/alarmwatch $PIDFILE
	else
		msg_not_running alarmwatch
	fi
	;;
  restart|force-reload)
	$0 stop
	$0 start
	RETVAL=$?
	;;
  status)
	status alarmwatch
	RETVAL=$?
	;;
  *)
	msg_usage "$0 {start|stop|restart|force-reload|status}"
	exit 3
esac

exit $RETVAL

# This must be last line !
# vi:syntax=sh:tw=78:ts=8:sw=4
Commit	Line	Data
	1	#!/bin/sh
	2	#
	3	# alarmwatch watches for lm_sensors alarms
	4	#
	5	# chkconfig: 2345 32 68
	6	#
	7	# description: watches lm_sensors and beeps on aparms
	8	#
	9	# $Id$
	10
	11	# Source function library
	12	. /etc/rc.d/init.d/functions
	13
	14	# Set defaults
	15	CHIPS=""
	16	PIDFILE=/var/run/alarmwatch.pid
	17	SENSORS_SETUP=no
	18	ALARMOPTIONS=""
	19
	20	# Get service config - may override defaults
	21	[ -f /etc/sysconfig/alarmwatch ] && . /etc/sysconfig/alarmwatch
	22
	23	RETVAL=0
	24	# See how we were called.
	25	case "$1" in
	26	start)
	27	# Check if the service is already running?
	28	if [ ! -f /var/lock/subsys/alarmwatch ]; then
	29	if [ -z "$CHIPS" ]; then
	30	nls "alarmwatch not configured (CHIPS not set), cannot start."
	31	exit 6
	32	fi
	33	if [ "$SENSORS_SETUP" = "yes" ]; then
	34	# setup sensors limits, etc.
	35	sensors -s
	36	fi
	37	# read from sensors to clear out any alarms caused by previous limits...
	38	sensors > /dev/null
	39	msg_starting alarmwatch
	40	daemon alarmwatch -p "$PIDFILE" $CHIPS $ALARMOPTIONS
	41	RETVAL=$?
	42	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/alarmwatch
	43	else
	44	msg_already_running alarmwatch
	45	fi
	46	;;
	47	stop)
	48	# Stop daemons.
	49	if [ -f /var/lock/subsys/alarmwatch ]; then
	50	msg_stopping alarmwatch
	51	killproc alarmwatch
	52	rm -f /var/lock/subsys/alarmwatch $PIDFILE
	53	else
	54	msg_not_running alarmwatch
	55	fi
	56	;;
	57	restart\|force-reload)
	58	$0 stop
	59	$0 start
	60	RETVAL=$?
	61	;;
	62	status)
	63	status alarmwatch
	64	RETVAL=$?
	65	;;
	66	*)
	67	msg_usage "$0 {start\|stop\|restart\|force-reload\|status}"
	68	exit 3
	69	esac
	70
	71	exit $RETVAL
	72
	73	# This must be last line !
	74	# vi:syntax=sh:tw=78:ts=8:sw=4