CONSOLE_LOGLEVEL=1
# Read functions
-. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions
+
+modprobe_c_cache=""
+modprobe_c() {
+ if [ "$modprobe_c_cache" ]; then
+ echo "$modprobe_c_cache"
+ return
+ fi
+ modprobe_c_cache=$(modprobe -c)
+}
+
+# parse kernel cmdline
+# needs /proc mounted
+parse_cmdline() {
+ read cmdline < /proc/cmdline
+ local arg
+
+ for arg in $cmdline; do
+ case "$arg" in
+ pld.no-upstart)
+ # default is set in /etc/sysconfig/system or detected in init.d/functions
+ USE_UPSTART=no
+ ;;
+ noudev)
+ # default is set in /etc/sysconfig/system
+ START_UDEV=no
+ ;;
+ nomdadm)
+ # default is set in /etc/sysconfig/system
+ MDADM=no
+ ;;
+ nomultipath)
+ # default is set in /etc/sysconfig/system
+ DM_MULTIPATH=no
+ ;;
+ nousb)
+ nousb=1
+ ;;
+ nohdparm)
+ nohdparm=1
+ ;;
+ fastboot)
+ fastboot=1
+ ;;
+ nopnp)
+ nopnp=1
+ ;;
+ nomodules)
+ nomodules=1
+ ;;
+ nofirewire)
+ nofirewire=1
+ ;;
+ nofsck)
+ nofsck=1
+ ;;
+ esac
+ done
+}
disable_selinux() {
local _d selinuxfs _t _r
# Remove duplicate entries from mtab (for vserver guest use only)
clean_vserver_mtab() {
- :>/etc/mtab.clean
+ > /etc/mtab.clean
while read device mountpoint line; do
grep -qs "$mountpoint" /etc/mtab.clean || \
echo "$device $mountpoint $line" >> /etc/mtab.clean
# Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
load_kernel_modules() {
+ local modules_file=$1
+ local _x _y _z v v1 old_IFS kernel kerneleq
{
- local _x _y v _z
- read _x _y v _z
+ read _x _y v _z
old_IFS=$IFS
- IFS='.'
+ # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
+ IFS='_-'
set -- $v
+ v1=${1}
+ IFS='.'
+ set -- $v1
IFS=$old_IFS
+
kernel="$1.$2"
kerneleq="$1.$2.$3"
} < /proc/version
- local module
+ local module args
# Loop over every line in modules file
( \
- grep -hvE '^(#|[[:blank:]]*$)' /etc/modules /etc/modules.$kernel /etc/modules.$kerneleq 2>/dev/null
+ grep -hvE '^(#|[[:blank:]]*$)' /etc/$modules_file /etc/$modules_file.$kernel /etc/$modules_file.$kerneleq 2>/dev/null
echo '' # make sure there is a LF at the end
) | while read module args; do
[ -z "$module" ] && continue
- modprobe -s $module -- $args
+ # strip comments
+ args=${args%%#*}
+ show "Loading %s kernel module(s)" "$module"
+ busy
+ modprobe -s $module -- $args && ok || fail
done
}
-# boot logging to /var/log/boot.msg. install showconsole package to get it.
-if [ -x /sbin/blogd ] && ! is_no "$RC_BOOTLOG"; then
+# launch repair shell
+# which after exiting will reboot
+repair_shell() {
+ local reason="$2"
+
+ # don't use '\n' in nls macro !
+ echo
+ echo
+ echo "$reason"
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ [ "$SELINUX" = "1" ] && disable_selinux
+ if ! is_no "$RUN_SULOGIN_ON_ERR"; then
+ /sbin/sulogin
+ else
+ /bin/sh
+ fi
+
+ run_cmd "Unmounting file systems" umount -a
+ run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress" reboot
+}
+
+check_root_fs() {
+ show "Checking root filesystem"; started
+ initlog -c "fsck -C -T -a $fsckoptions /"
+ rc=$?
+
+ # A return of 4 or higher means there were serious problems.
+ if [ $rc -gt 3 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
+
+ # A return of 2 or 3 means that filesystem was repaired but we need
+ # to reboot.
+ elif [ "$rc" = "2" -o "$rc" = "3" ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+ echo
+ nls "*** Filesystem was repaired but system needs to be"
+ nls "*** rebooted before mounting it."
+ nls "*** REBOOTING ***"
+ echo
+
+ run_cmd "Unmounting file systems" umount -a
+ mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress" reboot
+ elif [ "$rc" = "1" ]; then
+ _RUN_QUOTACHECK=1
+ fi
+}
+
+# Add raid devices
+init_mdadm() {
+ if [ ! -x /sbin/mdadm -o ! -f /etc/mdadm.conf ]; then
+ return
+ fi
+
+ modprobe -s md
+ local rc=0
+ if [ -f /proc/mdstat ]; then
+ golvm=0
+
+ if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf; then
+ show "Starting up RAID devices"; busy
+ /sbin/mdadm --assemble --scan --auto=yes
+ rc=$?
+ if [ "$rc" -eq 0 -o "$rc" -eq 2 ]; then
+ # rc is used later, too so set sane value
+ rc=0
+ deltext; ok
+ golvm=1
+ else
+ deltext; fail
+ fi
+
+ fi
+
+ # A non-zero return means there were problems
+ if [ $rc -gt 0 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+ show "Starting up RAID devices"; fail
+
+ PS1="$(nls '(RAID Repair)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the RAID startup.')"
+ fi
+
+ # LVM on RAID (keep in sync with LVM init)
+ if [ "$golvm" -eq "1" ]; then
+ if [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
+ run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelocking
+ run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmsysinit
+ [ "$lvmversion" = "2" ] && /sbin/vgmknodes
+ fi
+ fi
+ show "Starting up RAID devices"; ok
+ fi
+ return $rc
+}
+
+# Init LVM
+init_lvm() {
+ if [ ! -x /sbin/vgscan -o ! -x /sbin/vgchange ] && ! is_yes "$EVMS_LVM"; then
+ return
+ fi
+
+ if is_no "$LVM2"; then
+ lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
+ else
+ lvmversion=2
+ fi
+
+ if [ "$lvmversion" = "1" ] ; then
+ modprobe -s lvm-mod
+ lvmignorelocking=""
+ lvmsysinit=""
+ elif [ "$lvmversion" = "2" ] ; then
+ modprobe -s dm-mod
+ lvmignorelocking="--ignorelockingfailure"
+ lvmsysinit="--sysinit"
+ else
+ modprobe -s lvm-mod
+ # device mapper (2.5+ and patched 2.4)
+ modprobe -s dm-mod
+ lvmignorelocking=""
+ lvmsysinit=""
+ fi
+
+ run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelocking
+ run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmsysinit
+ if [ "$lvmversion" = "2" ]; then
+ /sbin/vgmknodes $lvmignorelocking
+ # display VG statistics
+ /sbin/vgdisplay -s $lvmignorelocking
+ fi
+}
+
+# boot logging to /var/log/boot.log. install showconsole package to get it.
+if ! is_no "$RC_BOOTLOG" && [ -x /sbin/blogd ]; then
RC_BOOTLOG=1
else
RC_BOOTLOG=
fi
-if ! is_yes "$VSERVER" ; then
+if ! is_yes "$VSERVER"; then
# we need /proc mounted before everything
- is_fsmounted proc /proc || mount -n -o gid=17 -t proc /proc /proc
+ is_fsmounted proc /proc || mount -n /proc || mount -n -o gid=17,hidepid=2 -t proc /proc /proc
- # Only read this once.
- cmdline=$(cat /proc/cmdline)
+ parse_cmdline
+
+ if [ -d /run ]; then
+ is_fsmounted tmpfs /run || mount -n -t tmpfs run /run
+ fi
+
+ # Early sysctls
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
# sysfs is also needed before any other things (under kernel > 2.5)
- if grep -q sysfs /proc/filesystems 2>/dev/null ; then
+ if grep -q sysfs /proc/filesystems 2>/dev/null; then
is_fsmounted sysfs /sys || mount -n -o gid=17 -t sysfs sysfs /sys
- if [ "$(kernelver)" -ge "002006014" ] && \
- grep -q securityfs /proc/filesystems 2>/dev/null ; then
- mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
+ if grep -q securityfs /proc/filesystems 2>/dev/null; then
+ mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
fi
fi
fi
# Disable splash when requested
- [ -e /proc/splash ] && is_no "$BOOT_SPLASH" && echo "0" > /proc/splash
+ is_no "$BOOT_SPLASH" && [ -e /proc/splash ] && echo "0" > /proc/splash
# Check SELinux status
selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null)
# Set the hostname
if [ -z "${HOSTNAME}" ]; then
- show "$(nls 'Host:') $(hostname)" ; ok
+ show "$(nls 'Host:') $(hostname)"; ok
else
run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
fi
if ! is_yes "$VSERVER"; then
# Set console loglevel
if [ -n "$CONSOLE_LOGLEVEL" ]; then
- /bin/dmesg -n $CONSOLE_LOGLEVEL
+ dmesg -n $CONSOLE_LOGLEVEL
fi
- if ! is_no "$START_UDEV"; then
- if [ -x /sbin/start_udev ]; then
- /sbin/start_udev
- elif [ -x /lib/firmware/firmware-loader.sh ]; then
- /sbin/sysctl -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh
- fi
+ if ! is_no "$START_UDEV" && [ -x /sbin/start_udev ] && [[ "$container" != lxc* ]]; then
+ is_fsmounted devtmpfs /dev || mount -n -t devtmpfs devtmpfs /dev
+ load_kernel_modules modules.preudev
+ /sbin/start_udev
+ use_upstart && [ -x /sbin/initctl ] && /sbin/initctl -q start udev
+ elif [ -x /lib/firmware/firmware-loader.sh ]; then
+ /sbin/sysctl -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh > /dev/null 2>&1
fi
# Unmount the initrd, if necessary
/sbin/blogd
fi
- # cpuset support (mounted unconditionally, shouldn't be a problem)
- if grep -q cgroup /proc/filesystems 2>/dev/null ; then
- mount -n -t cgroup none /dev/cpuset -o cpuset,noprefix
- [ $? -eq 0 ] && echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
- elif grep -q cpuset /proc/filesystems 2>/dev/null ; then
- mount -n -t cpuset none /dev/cpuset
- fi
-
# Configure Linux kernel (initial configuration, some required modules still
# may be missing).
- /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
-
- # Set the system clock.
- ARC=0
- SRM=0
- UTC=0
-
- if [ -f /etc/sysconfig/clock ]; then
- . /etc/sysconfig/clock
-
- # convert old style clock config to new values
- if [ "${CLOCKMODE}" = "GMT" ]; then
- UTC=true
- elif [ "${CLOCKMODE}" = "ARC" ]; then
- ARC=true
- fi
- fi
-
- if grep "system serial" /proc/cpuinfo 2>/dev/null | grep -q MILO 2>/dev/null ; then
- ARC=true
- fi
-
- CLOCKDEF=""
- CLOCKFLAGS="--hctosys"
-
- if is_yes "$UTC" ; then
- CLOCKFLAGS="$CLOCKFLAGS --utc"
- CLOCKDEF="$CLOCKDEF (utc)"
- else
- CLOCKFLAGS="$CLOCKFLAGS --localtime"
- CLOCKDEF="$CLOCKDEF (local)"
- fi
-
- if is_yes "$ARC" ; then
- CLOCKFLAGS="$CLOCKFLAGS -A"
- CLOCKDEF="$CLOCKDEF (arc)"
- fi
-
- if is_yes "$SRM" ; then
- CLOCKFLAGS="$CLOCKFLAGS -S"
- CLOCKDEF="$CLOCKDEF (srm)"
- fi
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
# Check if timezone definition is available
- if [ -e /etc/localtime ] ; then
- if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ if [ -e /etc/localtime ] && [ -e /dev/rtc -o -e /dev/rtc0 ] ; then
+ if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
fi
else
TIME_SETUP_DELAYED=yes
fi
+ delay_cryptsetup=0
if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
# XXX might need modules dep
# Device mapper & related initialization
if ! grep -qF device-mapper /proc/devices; then
- modprobe dm-mod
+ modprobe -s dm-mod
fi
- # but should do this before swapon?
. /etc/rc.d/init.d/cryptsetup
show "Starting disk encryption"
- init_crypto 0 && ok || fail
+ init_crypto 0
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
fi
# Start up swapping
# Initialize USB controllers
usb=0
- if ! strstr "$cmdline" "nousb" && ! is_fsmounted usbfs /proc/bus/usb ; then
- aliases=$(/sbin/modprobe -c | awk '/^alias[\t ]+usb-controller/ { print $3 }')
+ if [ -z "$nousb" ] && ! is_fsmounted usbfs /proc/bus/usb; then
+ aliases=$(modprobe_c | awk '/^alias[\t ]+usb-controller/ { print $3 }')
if [ -n "$aliases" -a "$aliases" != "off" ] ; then
- /sbin/modprobe -s usbcore
+ modprobe -s usbcore
for alias in $aliases ; do
[ "$alias" = "off" ] && continue
- run_cmd "$(nls 'Initializing USB controller') ($alias)" /sbin/modprobe -s $alias
+ run_cmd "$(nls 'Initializing USB controller') ($alias)" modprobe -s $alias
done
[ $? -eq 0 -a -n "$aliases" ] && usb=1
fi
fi
fi
- if [ "$usb" = "1" ] && ! is_fsmounted usbfs /proc/bus/usb ; then
+ if [ "$usb" = "1" -a -d /proc/bus/usb ] && ! is_fsmounted usbfs /proc/bus/usb ; then
run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
fi
needusbstorage=
if [ "$usb" = "1" ]; then
- needusbstorage=$(LC_ALL=C cat /proc/bus/usb/devices 2>/dev/null|grep -e "^I.*Cls=08" 2>/dev/null)
+ needusbstorage=$(cat /proc/bus/usb/devices 2>/dev/null | grep -e "^I.*Cls=08" 2>/dev/null)
if [ "$(kernelverser)" -lt "002006" ]; then
- LC_ALL=C grep -q 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe hid 2> /dev/null
+ grep -Fq 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe -s hid
mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null)
kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null)
if [ -n "$kbdoutput" ]; then
- run_cmd "Initializing USB keyboard" modprobe keybdev
+ run_cmd "Initializing USB keyboard" modprobe -s keybdev
fi
if [ -n "$mouseoutput" ]; then
- run_cmd "Initializing USB mouse" modprobe mousedev
+ run_cmd "Initializing USB mouse" modprobe -s mousedev
fi
fi
fi
# Setup hdparm thing (if exists and is needed)
- if ! strstr "$cmdline" nohdparm; then
+ if [ -z "$nohdparm" ]; then
[ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
fi
- if [ -f /fastboot ] || strstr "$cmdline" "fastboot"; then
- fastboot=yes
- else
- fastboot=
+ if [ -z "$fastboot" ] && [ -f /fastboot ]; then
+ fastboot=1
fi
if [ -f /fsckoptions ]; then
_ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
_ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
- if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ]; then
- show "Checking root filesystem"; started
- initlog -c "fsck -C -T -a $fsckoptions /"
-
- rc=$?
-
- # A return of 4 or higher means there were serious problems.
- if [ $rc -gt 3 ]; then
- [ -e /proc/splash ] && echo "verbose" > /proc/splash
- # don't use '\n' in nls macro !
- echo
- echo
- nls "*** An error occurred during the file system check."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
-
- PS1="`nls '(Repair filesystem)# '`"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if ! is_no "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
-
- run_cmd "Unmounting file systems" umount -a
- mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
- # A return of 2 or 3 means that filesystem was repaired but we need
- # to reboot.
- elif [ "$rc" = "2" -o "$rc" = "3" ]; then
- [ -e /proc/splash ] && echo "verbose" > /proc/splash
- echo
- nls "*** Filesystem was repaired but system needs to be"
- nls "*** rebooted before mounting it."
- nls "*** REBOOTING ***"
- echo
-
- run_cmd "Unmounting file systems" umount -a
- mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
- elif [ "$rc" = "1" ]; then
- _RUN_QUOTACHECK=1
- fi
- fi
-
- # Check for arguments
- if strstr "$cmdline" nopnp; then
- PNP=
- else
- PNP=yes
+ if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
+ check_root_fs
fi
# set up pnp and kernel pnp
- if [ -n "$PNP" ]; then
- if ! is_no "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
+ if is_yes "$RUN_USERPNP" || is_yes "$RUN_KERNELPNP"; then
+ if [ -z "$nopnp" ] && is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
fi
- if ! is_no "$RUN_KERNELPNP"; then
- /sbin/modprobe isa-pnp 2> /dev/null
+ if [ -z "$nopnp" ] && is_yes "$RUN_KERNELPNP"; then
+ modprobe -s isa-pnp
if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
show "Setting up ISA PNP devices (kernelspace pnp)"; busy
grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail)
# Clean up SELinux labels
if [ -n "$SELINUX" ]; then
- for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache ; do
+ for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache; do
[ -r $file ] && restorecon $file >/dev/null 2>&1
done
fi
- if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
- # XXX, this must be probably done after random is initialized from /var/run/random-seed
+ if [ "$delay_cryptsetup" != 0 ]; then
show "Starting disk encryption using the RNG"
- init_crypto 1 && ok || fail
+ init_crypto 1
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
fi
else
# Start logging console output since we have all /dev stuff setup
if ! is_yes "$VSERVER"; then
# Clear mtab
- :>/etc/mtab
- [ -f /etc/cryptomtab ] && :>/etc/cryptomtab
+ > /etc/mtab
+ [ -f /etc/cryptomtab ] && > /etc/cryptomtab
# Enter root, /proc, /sys and other into mtab.
- mount -f /
- mount -f /proc
+ mount -f / 2> /dev/null
+ mount -f /proc 2> /dev/null
+ if is_fsmounted devtmpfs /dev; then
+ mount -f -t devtmpfs devtmpfs /dev 2> /dev/null
+ fi
+ if is_fsmounted tmpfs /run; then
+ mount -f -t tmpfs run /run 2> /dev/null
+ fi
+
if is_fsmounted usbfs /proc/bus/usb; then
- mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
+ mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb 2> /dev/null
fi
if is_fsmounted sysfs /sys; then
- mount -f -t sysfs sysfs /sys
+ mount -f -t sysfs sysfs /sys 2> /dev/null
if is_fsmounted securityfs /sys/kernel/security ; then
- mount -f -t securityfs securityfs /sys/kernel/security
+ mount -f -t securityfs securityfs /sys/kernel/security 2> /dev/null
fi
fi
if is_fsmounted selinuxfs /selinux; then
- mount -f -t selinuxfs selinuxfs /selinux
+ mount -f -t selinuxfs selinuxfs /selinux 2> /dev/null
fi
- if is_fsmounted cgroup /dev/cpuset; then
- mount -f -t cgroup -o cpuset,noprefix none /dev/cpuset
- elif is_fsmounted cpuset /dev/cpuset; then
- mount -f -t cpuset none /dev/cpuset
- fi
+ emit --no-wait root-filesystem
+ emit --no-wait virtual-filesystems
if [ ! -f /proc/modules ]; then
USEMODULES=
- elif ! strstr "$cmdline" nomodules; then
+ elif [ -z "$nomodules" ]; then
USEMODULES=y
else
USEMODULES=
# Load usb storage here, to match most other things
if [ -n "$needusbstorage" ]; then
- modprobe usb-storage >/dev/null 2>&1
+ modprobe -s usb-storage
fi
# Load firewire devices
- if ! strstr "$cmdline" nofirewire; then
- aliases=$(/sbin/modprobe -c | awk '/^alias ieee1394-controller/ { print $3 }')
+ if [ -z "$nofirewire" ]; then
+ aliases=$(modprobe_c | awk '/^alias ieee1394-controller/ { print $3 }')
if [ -n "$aliases" -a "$aliases" != "off" ] ; then
for alias in $aliases ; do
[ "$alias" = "off" ] && continue
- run_cmd "$(nls 'Initializing firewire controller') ($alias)" /sbin/modprobe $alias
+ run_cmd "$(nls 'Initializing firewire controller') ($alias)" modprobe $alias
done
- LC_ALL=C grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && /sbin/modprobe -s sbp2 > /dev/null 2>&1
+ grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && modprobe -s sbp2
fi
fi
# Load sound modules if they need persistent DMA buffers
- if /sbin/modprobe -c | grep -q "^options sound dmabuf=1"; then
+ if modprobe_c | grep -q "^options sound dmabuf=1"; then
RETURN=0
- alias=$(/sbin/modprobe -c | grep -sE "^alias[[:space:]]+sound[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
+ alias=$(modprobe_c | grep -sE "^alias[[:space:]]+sound[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
if [ -n "$alias" -a "$alias" != "off" ] ; then
run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
RETURN=$?
fi
- alias=$(/sbin/modprobe -c | grep -sE "^alias[[:space:]]+sound-slot-0[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
+ alias=$(modprobe_c | grep -sE "^alias[[:space:]]+sound-slot-0[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
if [ -n "$alias" -a "$alias" != "off" ] ; then
run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
RETURN=$?
fi
# Load modules
- load_kernel_modules
+ if ! use_upstart; then
+ load_kernel_modules modules
+ for f in /etc/modules-load.d/*.conf; do
+ # already loaded by implicit "modules" load
+ [ "${f##*/}" = "modules.conf" ] && continue
+
+ [ -r $f ] || continue
+ load_kernel_modules ${f##/etc/}
+ done
+ fi
- if [ -x /sbin/multipath ]; then
+ if ! is_no "$DM_MULTIPATH" [ -x /sbin/multipath ]; then
# first make nodes that were discarded due (possible) new /dev mount
modprobe -s dm-mod
/sbin/dmsetup mknodes
/sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p'
fi
- if [ -x /sbin/dmraid ]; then
+ if ! is_no "$DMRAID" && [ -x /sbin/dmraid ]; then
run_cmd "Activating ATARAID devices" /sbin/dmraid -ay
fi
# Find and activate volume groups:
# EVMS
- if [ -x /sbin/evms_activate ]; then
+ if is_yes "$EVMS_LVM" && [ -x /sbin/evms_activate ]; then
if [ "$(kernelverser)" -lt "002006" ]; then
# Linux 2.4 core modules
- modprobe -s evms > /dev/null 2>&1
- modprobe -s evms_passthru > /dev/null 2>&1
- modprobe -s ldev_mgr > /dev/null 2>&1
- modprobe -s dos_part > /dev/null 2>&1
+ modprobe -s evms
+ modprobe -s evms_passthru
+ modprobe -s ldev_mgr
+ modprobe -s dos_part
else
# Linux 2.6 core module
- modprobe -s evmscore > /dev/null 2>&1
+ modprobe -s evmscore
fi
- is_yes "$EVMS_GUID_PTABLE" && modprobe -s gpt_part >/dev/null 2>&1
- is_yes "$EVMS_LVM" && modprobe -s lvm_vge >/dev/null 2>&1
- is_yes "$EVMS_AIX" && modprobe -s AIXlvm_vge >/dev/null 2>&1
- is_yes "$EVMS_OS2" && modprobe -s os2lvm_vge >/dev/null 2>&1
+ is_yes "$EVMS_GUID_PTABLE" && modprobe -s gpt_part
+ is_yes "$EVMS_LVM" && modprobe -s lvm_vge
+ is_yes "$EVMS_AIX" && modprobe -s AIXlvm_vge
+ is_yes "$EVMS_OS2" && modprobe -s os2lvm_vge
run_cmd "Discovering EVMS volumes" /sbin/evms_activate
if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then
# Link nodes for compatibility with LVM
fi
fi
- # LVM (keep in sync with LVM starting after RAID run!)
- if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
- lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
- if [ "$lvmversion" = "1" ] ; then
- modprobe -s lvm-mod >/dev/null 2>&1
- lvmignorelock=""
- elif [ "$lvmversion" = "2" ] ; then
- modprobe -s dm-mod >/dev/null 2>&1
- lvmignorelock="--ignorelockingfailure"
- else
- modprobe -s lvm-mod >/dev/null 2>&1
- # device mapper (2.5+ and patched 2.4)
- modprobe -s dm-mod >/dev/null 2>&1
- lvmignorelock=""
- fi
-
- run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelock
- run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmignorelock
- if [ "$lvmversion" = "2" ]; then
- /sbin/vgmknodes
- # display VG statistics
- /sbin/vgdisplay -s
- fi
+ # Init LVM
+ if ! is_no "$LVM2"; then
+ init_lvm
fi
- # Add raid devices
- if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ] || [ -f /etc/raidtab ]; then
- modprobe -s md >/dev/null 2>&1
- if [ -f /proc/mdstat ]; then
- goraidtab=1
- golvm=0
- rc=0
- if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ]; then
- if (grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null); then
- run_cmd "Starting up RAID devices" /sbin/mdadm --assemble --scan --auto=yes
- rc=$?
- [ "$rc" -eq 0 ] && goraidtab=0 && golvm=1
- fi
- fi
-
- if [ -f /etc/raidtab -a "$goraidtab" -eq 1 ]; then
- for i in $(awk '!/^#/ && /raiddev/{print $2}' /etc/raidtab 2>/dev/null); do
- golvm=1
- RAIDDEV=$(basename $i)
- RAIDSTAT=$(grep "^$RAIDDEV : active" /proc/mdstat 2>/dev/null)
- show "Starting up RAID device %s" $RAIDDEV
- busy
- if [ -z "$RAIDSTAT" ]; then
- # Try raidstart first...if that fails then
- # fall back to raid0run and if that fails too
- # fall back to raidadd, raidrun.
- RESULT=1
- if [ -x /sbin/raidstart ]; then
- /sbin/raidstart $i
- RESULT=$?
- fi
- if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then
- /sbin/raid0run $i
- RESULT=$?
- fi
- if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then
- /sbin/raidadd $i
- /sbin/raidrun $i
- RESULT=$?
- fi
- if [ $RESULT -gt 0 ]; then
- rc=1
- fail
- else
- ok
- fi
- else
- ok
- fi
- done
- fi
+ if [ "$delay_cryptsetup" != 0 ]; then
+ show "Starting disk encryption"
+ init_crypto 1
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
+ fi
- # A non-zero return means there were problems
- if [ $rc -gt 0 ]; then
- [ -e /proc/splash ] && echo "verbose" > /proc/splash
- show "Starting up RAID devices"; fail
- echo
- echo
- nls "*** An error occurred during the RAID startup."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
-
- PS1="$(nls '(RAID Repair)# ')"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if ! is_no "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
-
- run_cmd "Unmounting file systems" umount -a
- run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
- fi
- # LVM on RAID (keep in sync with LVM setting few lines above)
- if [ "$golvm" -eq "1" ]; then
- if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
- run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelock
- run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmignorelock
- [ "$lvmversion" = "2" ] && /sbin/vgmknodes
- fi
- fi
- show "Starting up RAID devices"; ok
- fi
+ if ! is_no "$MDADM"; then
+ init_mdadm
fi
_RUN_QUOTACHECK=0
# Check filesystems
- if [ -z "$fastboot" ] && ! strstr "$cmdline" nofsck; then
+ if [ -z "$fastboot" ] && [ -z "$nofsck" ]; then
rc_splash "fsck start"
show "Checking filesystems"; started
initlog -c "fsck -C -T -R -A -a -P $fsckoptions"
# A return of 2 or higher means there were serious problems
if [ $rc -gt 1 ]; then
[ -e /proc/splash ] && echo "verbose" > /proc/splash
- echo
- echo
- nls "*** An error occurred during the file system check."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
PS1="$(nls '(Repair filesystem)# ')"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if ! is_no "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
- run_cmd "Unmounting file systems" umount -a
- run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
_RUN_QUOTACHECK=1
fi
# Mount all other filesystems (except for NFS and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
-
run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev
# now we have /usr mounted, recheck if we have gettext and tput available.
# A return of 2 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
[ -e /proc/splash ] && echo "verbose" > /proc/splash
- echo
- echo
- nls "*** An error occurred during the file system check."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
PS1="$(nls '(Repair filesystem)# ')"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if ! is_no "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
- run_cmd "Unmounting file systems" umount -a
- run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
_RUN_QUOTACHECK=1
fi
show "Remounting encrypted filesystems back in rw mode"; busy
- awk '
+ LC_ALL=C awk '
FILENAME=="/proc/mounts" {
TAB[$2]=$1;
}
# /var/log should be writable now, so start saving the boot output
if [ "$RC_BOOTLOG" ]; then
- echo > /var/log/boot.msg
+ echo > /var/log/boot.log
killall -IO blogd
fi
run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
fi
+ emit --no-wait local-filesystems
+
+ # FIXME: this should be delayed until remote filesystems are mounted,
+ # especialy when /usr or other standard fs is remote
+ emit --no-wait filesystem
+
# Turn on process accounting
if [ -x /etc/rc.d/rc.acct ]; then
/etc/rc.d/rc.acct start
fi
# Set the clock if timezone definition wasn't available (eg. /usr not mounted)
- if is_yes "$TIME_SETUP_DELAYED"; then
- if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ if is_yes "$TIME_SETUP_DELAYED" && [ -e /dev/rtc -o -e /dev/rtc0 ]; then
+ if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
fi
fi
. /etc/rc.d/rc.serial
fi
- if [ -f /proc/sys/kernel/panic -a -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" ]; then
+ if [ -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" -a -f /proc/sys/kernel/panic ]; then
show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
- if (sysctl -w kernel.panic=$PANIC_REBOOT_TIME >/dev/null 2>&1); then ok; else fail; fi
+ # NOTE: you should use /etc/sysctl.conf instead
+ if sysctl -w kernel.panic=$PANIC_REBOOT_TIME >/dev/null 2>&1; then ok; else fail; fi
fi
# ... and here finish configuring parameters
- /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
else
+ emit --no-wait root-filesystem
+ emit --no-wait virtual-filesystems
+ emit --no-wait local-filesystems
+ emit --no-wait filesystem
+
# /var/log should be writable now, so start saving the boot output
if [ "$RC_BOOTLOG" ]; then
- echo > /var/log/boot.msg
+ echo > /var/log/boot.log
killall -IO blogd
fi
;;
esac
else
- [ "$bafile" != "hwprofile" ] && rm -f $afile 2> /dev/null
+ [ "$bafile" != "hwprofile" -a "$bafile" != "random-seed" ] && rm -f $afile 2> /dev/null
fi
done
{
# Clean up utmp/wtmp
if ! is_no "$NEED_XFILES"; then
- :>/var/run/utmpx
+ > /var/run/utmpx
touch /var/log/wtmpx
chown root:utmp /var/run/utmpx /var/log/wtmpx
chmod 0664 /var/run/utmpx /var/log/wtmpx
else
- :>/var/run/utmp
+ > /var/run/utmp
touch /var/log/wtmp
chown root:utmp /var/run/utmp /var/log/wtmp
chmod 0664 /var/run/utmp /var/log/wtmp
fi
# Clean /tmp
-if is_yes "$CLEAN_TMP"; then
- # XXX LC_ALL needed here
- rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
+if is_yes "$CLEAN_TMP" && ! is_fsmounted tmpfs /tmp; then
+ LC_ALL=C rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
fi
# System protected dirs
[ -n "$SELINUX" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
if ! is_yes "$VSERVER"; then
- run_cmd "Enabling swap space" /bin/true
+ run_cmd "Enabling swap space" true
# Right, now turn on swap in case we swap to files
swapon -a >/dev/null 2>&1
+ emit --no-wait all-swaps
# If a SCSI tape has been detected, load the st module unconditionally
# since many SCSI tapes don't deal well with st being loaded and unloaded
if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
if [ -n "$USEMODULES" ] ; then
# Try to load the module. If it fails, ignore it...
- insmod -p st >/dev/null 2>&1 && modprobe -s st >/dev/null 2>&1
+ insmod -p st >/dev/null 2>&1 && modprobe -s st
fi
fi
fi
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
- dmesg > /var/log/dmesg
+ dmesg --raw > /var/log/dmesg
i=5
while [ $i -ge 0 ]; do
if [ -f /var/log/dmesg.$i ]; then
done
cp -f /var/log/dmesg /var/log/dmesg.0
chmod 0600 /var/log/dmesg /var/log/dmesg.0
+else
+ emit --no-wait all-swaps
fi
-kill -TERM $(/sbin/pidof getkey) >/dev/null 2>&1
+if ! is_no "$RC_PROMPT"; then
+ while :; do
+ pid=$(/sbin/pidof getkey)
+ [ -n "$pid" -o -e /var/run/getkey_done ] && break
+ usleep 100000
+ done
+ [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
+fi
} &
-# extra check if the background process we just spawned is still running,
+# /proc extra check if the background process we just spawned is still running,
# as in case of vserver bootup it finishes quite instantly.
if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
- /sbin/getkey -c 5 i && touch /var/run/confirm
+ /sbin/getkey i && touch /var/run/confirm
+ touch /var/run/getkey_done
fi
wait
+if ! is_no "$RC_PROMPT"; then
+ rm -f /var/run/getkey_done
+fi
echo
+
+emit --no-wait pld.sysinit-done
+