}
}')
+# override %__spec_build_pre and %__spec_install_pre from macros.rpmbuild
+# adding %{_clean_env}
+%__spec_build_pre %{_clean_env}\
+%{___build_pre}\
+%{nil}
+%__spec_install_pre %{_clean_env}\
+%{___build_pre}\
+%{?buildroot:%{__rm} -rf '%{buildroot}'; %{__mkdir_p} '%{buildroot}'}\
+%{nil}
+
#-----------------------------------------------------------------
%configure2_13 { \
if [ -n "$LINGUAS" ]; then unset LINGUAS; fi; \
%{dependencytracking} \
}
+# Note: pass only standard cmake macros here.
+# The only exception is SYSCONF_INSTALL_DIR, used commonly in KDE packages,
+# where the default (${CMAKE_INSTALL_PREFIX}/etc) is not FHS-compliant and
+# absolute path MUST be used to comply with FHS.
+# The other non-standard cmake macros used commonly in KDE
+# (INCLUDE_INSTALL_DIR, LIB_INSTALL_DIR, SHARE_INSTALL_PREFIX)
+# have sane default values in KDE, and some packages use these names
+# in different way (e.g. expect them to be always relative or always
+# absolute).
%cmake \
%{?__cc:CC="${CC:-%{__cc}}"} \\\
%{?__cxx:CXX="${CXX:-%{__cxx}}"} \\\
-DCMAKE_BUILD_TYPE=%{!?debug:PLD}%{?debug:Debug} \\\
-DCMAKE_INSTALL_LIBDIR:PATH=%{_libdir} \\\
-DCMAKE_INSTALL_PREFIX:PATH=%{_prefix} \\\
- -DINCLUDE_INSTALL_DIR:PATH=%{_includedir} \\\
- -DLIB_INSTALL_DIR:PATH=%{_libdir} \\\
- -DSHARE_INSTALL_PREFIX:PATH=%{_datadir} \\\
-DSYSCONF_INSTALL_DIR:PATH=%{_sysconfdir} \\\
- -DCMAKE_CXX_FLAGS_PLD="${CXXFLAGS:-%{rpmcxxflags} -DNDEBUG}" \\\
- -DCMAKE_C_FLAGS_PLD="${CFLAGS:-%{rpmcflags} -DNDEBUG}" \\\
- -DCMAKE_Fortran_FLAGS_PLD="${CFLAGS:-%{rpmcflags} -DNDEBUG}" \\\
+ -DCMAKE_CXX_FLAGS_PLD="${CXXFLAGS:-%{rpmcxxflags} -DNDEBUG -DQT_NO_DEBUG}" \\\
+ -DCMAKE_C_FLAGS_PLD="${CFLAGS:-%{rpmcflags} -DNDEBUG -DQT_NO_DEBUG}" \\\
+ -DCMAKE_Fortran_FLAGS_PLD="${CFLAGS:-%{rpmcflags} -DNDEBUG -DQT_NO_DEBUG}" \\\
-DCMAKE_EXE_LINKER_FLAGS_PLD="${LDFLAGS:-%{rpmldflags}}" \\\
-DCMAKE_SHARED_LINKER_FLAGS_PLD="${LDFLAGS:-%{rpmldflags}}" \\\
-DCMAKE_MODULE_LINKER_FLAGS_PLD="${LDFLAGS:-%{rpmldflags}}" \\\
CPP="%{__cpp}" \
CFLAGS="%{rpmcflags}" \
CXXFLAGS="%{rpmcxxflags}" \
+LINKFLAGS="%{rpmldflags}" \
%{__waf} \
}
echo ${Z:-ERROR}; \\
)
+%_kernel_version_code %( \\
+ Z=$(awk '/LINUX_VERSION_CODE/{print $3}' %{_kernelsrcdir}/include/linux/version.h 2>/dev/null); \\
+ echo ${Z:-ERROR}; \\
+)
+
+%_kernel_version_magic() %(echo $((%{1} * 65536 + %{2} * 256 + %{3})))
+
# `uname -r` used for building/installing kernel modules
%_kernel_ver %{__kernel_ver}%{!?_without_dist_kernel:%(echo %{__kernel_ver} | grep -q -e - || echo -%{__kernel_qf %{R}})}
# package version OR `uname -r` for non-dist kernel to be used in @release field
# NOTE: error output must be empty. otherwise can't build pecl packages if no php*-devel is installed
%php_suffix %{expand:%%global php_suffix %(c=$(php-config --sysconfdir 2>/dev/null) || echo '' && echo ${c#/etc/php})%%{nil}}%php_suffix
+# phpXY, version always present for using current php version (in regards of php*-devel package)
+%php_versuffix %{expand:%%global php_versuffix %((IFS=.; set -- $(php-config --version); echo $1$2))%%{nil}}%php_versuffix
+
# php cli. version that php headers are installed for
-%__php /usr/bin/%{php_name}
+%__php /usr/bin/php%{php_versuffix}
# helper macro
%__php_api_requires(v:) Requires: %{php_name}(%{expand:%1}) = %{expand:%{%{!?2:%{1}}%{?2}}}
# Python 3.x
# python main version
-%__python3 python3
+%__python3 /usr/bin/python3
%py3_ver %{expand:%%global py3_ver %(%{__python3} -c "import sys; print(sys.version[:3])" 2>/dev/null || echo ERROR)}%py3_ver
# directories
# JAVA macros specific for PLD
# Directory for tomcat context configuration files
-%_tomcatconfdir %{_sharedstatedir}/tomcat/conf/Catalina/localhost
+%_tomcatconfdir /etc/tomcat/Catalina/localhost
# Tomcat cache path
%_tomcatcachedir %{_sharedstatedir}/tomcat/work/Catalina/localhost
M=$PWD CONSTIFY_PLUGIN="" %{MakeOpts} \
%{?-C:cd -} \
} \
-compile_old() { \
+compile %{*} \
+%{nil}
+
+%build_kernel_modules_compat(p:P:m:C:c) \
+%{!?-m:%{error:%{0}: Required module name/list missing} exit 1} \
+ \
+%define Opts \\\\\\\
+%if "%{_target_base_arch}" != "%{_host_base_arch}" \\\
+ %if "%{_host_base_arch}" == "x86_64" && "%{_target_base_arch}" == "i386" \\\
+ CC="%{__cc}" ARCH=%{_target_base_arch} \\\
+ %else \\\
+ ARCH=%{_target_base_arch} CROSS_COMPILE=%{_target_cpu}-pld-linux- \\\
+ %endif \\\
+%else \\\
+ CC="%{__cc}" \\\
+%endif \
+%define MakeOpts HOSTCC="%{__cc}" SYSSRC=%{_kernelsrcdir} SYSOUT=$PWD/o \\\\\\\
+ O=$PWD/o %{?with_verbose:V=1} %{Opts} \
+ \
+%{?-C:cd %{-C*}} \
+compile() { \
local L="<" PATCH_SH; \
[[ '%{*}' != *$L$L* ]] || PATCH_SH="set -x -e;$(cat)" \
set -e -x \
ln -sf %{_kernelsrcdir}/Module.symvers-$cfg o/Module.symvers \
if [ -f %{_kernelsrcdir}/include/generated/autoconf-$cfg.h ]; then \
ln -sf %{_kernelsrcdir}/include/generated/autoconf-$cfg.h o/include/generated/autoconf.h \
- ln -s ../generated/autoconf.h o/include/linux/autoconf.h \
+ ln -s ../generated/autoconf.h o/include/linux/autoconf.h \
else \
ln -sf %{_kernelsrcdir}/include/linux/autoconf-$cfg.h o/include/linux/autoconf.h \
fi \
%endif \
\
%{!?-c:%{__make} -C %{_kernelsrcdir} clean \\\
- RCS_FIND_IGNORE="-name '*.[ks]o' -o" \\\
+ RCS_FIND_IGNORE="-name '*.[ks]o' -o" \\\
${1+"$@"} \\\
M=$PWD %{MakeOpts}} \
\
done \
%{?-C:cd -} \
} \
-if [ -r "%{_kernelsrcdir}/.config" ]; then \
- compile %{*} \
-else \
- compile_old %{*} \
-fi \
+compile %{*} \
%{nil}
echo "alias ${MNAME} ${MNAME}-%{-s*}" >> %{ModprobeD}/%{-n*}.conf} \
done \
} \
-__install_kernel_modules_old() { \
+__install_kernel_modules \
+unset INSTALLROOT \
+%{nil}
+
+%install_kernel_modules_compat(m:d:s:n:D:) \
+%{!?-m:%{error:%{0}: Required module name (-m) missing}exit 1} \
+%{!?-d:%{error:%{0}: Required module directory missing}exit 1} \
+%{?-n:%{!?-s:%{error:%{0}: Modprobe .conf file requires module suffix}exit 1}} \
+ \
+INSTALLROOT=%{-D*} \
+[ -n "$INSTALLROOT" ] || INSTALLROOT=$RPM_BUILD_ROOT \
+ \
+%define KernelD $INSTALLROOT/lib/modules/%{_kernel_ver} \
+%define ModprobeD $INSTALLROOT%{_sysconfdir}/modprobe.d/%{_kernel_ver} \
+ \
+__install_kernel_modules() { \
%{!?debug:set +x;} \
local cfgs='%{?with_dist_kernel:%{?with_smp: smp}%{?with_up: up}}%{!?with_dist_kernel: nondist}' \
\
done \
done \
} \
-if [ -r "%{_kernelsrcdir}/.config" ]; then \
- __install_kernel_modules \
-else \
- __install_kernel_modules_old \
-fi \
+__install_kernel_modules \
unset INSTALLROOT \
%{nil}
# patchset macros
+# generate SourceX urls from range START STOP
+# Format can be SINGLE format char of %e, %f, %g, see seq(1)
+# The sources start from 10000
+#
# Author: Elan Ruusamäe <glen@pld-linux.org>
#
# Usage:
# %patchset_source -f <seq(1) format> <start> [<end>]
# %patchset_patch <start> [<end>]
-#
# If <end> is omited, it is assumed to be <start>.
#
# For example in preamble:
# %patchset_source -f ftp://ftp.vim.org/pub/editors/vim/patches/7.0/7.0.%03g 33 44
# and in %prep:
# %patchset_patch 33 44
-
-# generate SourceX urls from range START STOP
-# Format can be SINGLE format char of %e, %f, %g, see seq(1)
-# The sources start from 10000
-%patchset_source(f:b:) %(
- base=%{-b*}%{!-b*:10000};
+#
+# Using sources list:
+# BuildRequires: rpmbuild(macros) >= 1.426
+# %patchset_source -f <url> -s <filelist>
+# %patchset_patch -s <filelist>
+# For example (ncurses):
+# BuildRequires: rpmbuild(macros) >= 1.683
+# %patchset_source -f ftp://dickey.his.com/ncurses/%{basever}/ -s sources
+# %patchset_patch -s sources -p1
+#
+
+%patchset_source(f:b:s:) %(
+ base=%{-b*}%{!-b*:10000}
+%{-s:
+ baseurl='%{-f*}'
+ filelist='%{-s*}'
+ i=$base
+ while read checksum file; do
+ printf "Patch%d: %s%s\\n" $i "$baseurl" "$file"
+ i=$((i+1))
+ done < $filelist
+}
+%{!-s:
start=$(expr $base + %1);
end=$(expr $base + %{?2}%{!?2:%{1}});
# we need to call seq twice as it doesn't allow two formats
seq -f '%{-f*}' %1 %{?2}%{!?2:%{1}} > %{tmpdir}/__ps2;
paste %{tmpdir}/__ps{1,2};
rm -f %{tmpdir}/__ps{1,2};
+}
) \
%{nil}
# apply sources from %patchset_source
# -p specify -pX for %patch line
# -b base offset: defaults to 10000
-%patchset_patch(f:p:b:) %(
- base=%{-b*}%{!-b*:10000};
+# -s filelist to read files from
+%patchset_patch(f:p:b:s:) %(
+ base=%{-b*}%{!-b*:10000}
+ patchlevel=%{-p*:-p%{-p*}}
+%{-s:
+ filelist='%{-s*}'
+ i=$base
+ while read checksum file; do
+ printf "patch%d %s\\n" $i "$patchlevel" | sed -e s,^,%%,
+ i=$((i+1))
+ done < $filelist
+}
+%{!-s:
start=$(expr $base + %1);
end=$(expr $base + %{?2}%{!?2:%{1}});
echo ": patchset_patch %1%{?2: to %2}";
- seq -f 'patch%g %{-p*:-p%{-p*}}' $start $end | sed -e s,^,%%,;
+ seq -f "patch%g $patchlevel" $start $end | sed -e s,^,%%,;
+}
) \
%{nil}
# Requirements:
# Requires: grep
# Requires: sed >= 4.0
-# BuildRequires: rpmbuild(macros) >= 1.552
+# BuildRequires: rpmbuild(macros) >= 1.685
%nagios_nrpe(a:d:c:f:) {\
- m=$(md5sum < /etc/nagios/nrpe.cfg); \
+ if %{__grep} -q '^include_dir=/etc/nagios/nrpe.d' /etc/nagios/nrpe.cfg && [ -d /etc/nagios/nrpe.d ]; then \
+ file=/etc/nagios/nrpe.d/%{-a*}%{-d*}.cfg; \
+ else \
+ file=/etc/nagios/nrpe.cfg; \
+ fi; \
+ m=$(test -f $file && md5sum < $file); \
%{-a:# on -a and config exists \
if [ -f /etc/nagios/nrpe.cfg ]; then \
- if ! %{__grep} -q '^command\[%{-a*}\]' /etc/nagios/nrpe.cfg; then \
- %{__sed} -ne 's/^[ \t]*command_line[ \t]\+\(.\+\)/command[%{-a*}]=\1/p' %{-f*} >> /etc/nagios/nrpe.cfg; \
+ if [ ! -f $file ] || ! %{__grep} -q '^command\[%{-a*}\]' $file; then \
+ %{__sed} -ne 's/^[ \t]*command_line[ \t]\+\(.\+\)/command[%{-a*}]=\1/p' %{-f*} >> $file; \
fi; \
fi;} \
%{-d:# on package remove, -d and config exists \
- if [ "$1" = "0" -a -f /etc/nagios/nrpe.cfg ]; then \
- %{__sed} -i -e '/^[ \t]*command\[%{-d*}\]/d' /etc/nagios/nrpe.cfg; \
+ if [ "$1" = "0" -a -f $file ]; then \
+ %{__sed} -i -e '/^[ \t]*command\[%{-d*}\]/d' $file; \
fi;} \
- if [ "$m" != "$(md5sum < /etc/nagios/nrpe.cfg)" ]; then \
+ if [ "$m" != "$(md5sum < $file)" ]; then \
%service -q nrpe restart; \
fi; \
}%{nil}
# pre/post script for -upstart subpackages
#
# Author: Jacek Konieczny <jajcus@jajcus.net>
+# Author: Elan Ruusamäe <glen@pld-linux.org>
#
# Usage:
# %upstart_post service_name
# %upstart_postun %{name}
#
# Requirements:
-# BuildRequires: rpmbuild(macros) >= 1.560
+# BuildRequires: rpmbuild(macros) >= 1.690
# Requires: rc-scripts >= 0.4.3
# migrate from init script to upstart job
%upstart_post() \
- if [ -f /var/lock/subsys/%1 ]; then \
+ if [ -x /sbin/initctl ] && [ -f /var/lock/subsys/%1 ]; then \
/sbin/service --no-upstart %1 stop \
/sbin/service %1 start \
- fi
+ fi \
+%{nil}
# restart the job after upgrade or migrate to init script on removal
# cannot be stopped with 'service' as /etc/init/$name.conf may be missing
if [ -x /sbin/initctl ] && /sbin/initctl status %1 2>/dev/null | grep -q 'running' ; then \
/sbin/initctl stop %1 >/dev/null 2>&1 \
[ -f /etc/rc.d/init.d/%1 -o -f /etc/init/%1.conf ] && { echo -n "Re-"; /sbin/service %1 start; }; \
- fi
+ fi \
+%{nil}
# Haskell Macros
# BuildRequires: rpmbuild(macros) >= 1.608
%{nil}
%systemdunitdir /lib/systemd/system
+%systemduserunitdir /usr/lib/systemd/user
%systemdtmpfilesdir /usr/lib/tmpfiles.d
+#-----------------------------------------------------------------
+# Update hardware database index
+#
+# Requirements:
+# BuildRequires: rpmbuild(macros) >= 1.691
+# Requires: udev-core >= 1:196
+
+%udev_hwdb_update() \
+/sbin/udevadm hwdb --update >/dev/null 2>&1 || : \
+%{nil}
+
# EOF
projects / packages / rpm-build-macros.git / blobdiff