- not so nice hacks, but now works with pppd 2.4.2

[packages/ppp.git] / ppp-debian_scripts.patch

--- ppp-2.3.5.orig/debian/README.debian	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/README.debian	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,145 @@
+PPP for Debian
+---------------
+
+Upgrading from Previous versions to 2.3.1 and beyond.
+--------------------------------
+
+The default setup in /etc/ppp/options is to turn authentication on.
+
+This may cause you not to be able to log into your ISP any more, if they do
+not support PAP or CHAP authentication.  All you need to do is set ``noauth''
+either on pppd's command line or in /etc/ppp/peers/provider, in order to switch
+it off for this connection.
+
+[Don't just turn it off again in the options file, since it is better to deny
+ access by default for security reasons.]
+
+Apparently some people have had problems with /etc/chatscripts not
+ending up owned by root.dip.  Just run
+
+  chown root.dip /etc/chatscripts
+
+PAM Support (needed for inbound PAP):
+------------------------------------
+
+pppd with PAM support for inbound PAP logins is available by installing
+ppp-pam, which contains a replacement /usr/sbin/pppd.
+
+Cheers, Phil.
+<phil@hands.com>
+
+---------
+
+This release provides scripts to conveniently control ppp from user space.
+Note that the scripts only work with the proper setup in /etc/ppp. Edit
+the configuration files and test the operation of your link in superuser
+mode first.
+
+Read the manpage for pon,poff,plog please.
+
+Available scripts:
+------------------
+
+pon		Bring link up. Executes pppd and will immediately
+		return the command prompt while still dialing.
+		use plog to figure out what pppd does.
+
+poff		Bring link down. Kills pppd
+
+plog 		shows the last lines of the pppd log.
+
+Outbound and Inbound Dialing Setup
+----------------------------------
+pppd attempts to handle both inbound and outbound through one set of
+configuration files. The /etc/ppp/options file has been set up for the most
+common setups. Please do not change it if at all possible. Specify
+parameters on the commandline if necessary. If you find a change that will
+be beneficial to all then please tell me about it.
+
+Outbound Setup (Simple one server setup!)
+--------------
+
+Edit the file /etc/chatscripts/provider and make sure it contains what
+you need to dialup into your server and eventually start up ppp on the
+remote machine.
+
+Edit the file /etc/ppp/peers/provider and put all options in it that you need
+to connect to your server. The most common options are already provided for
+you. If you need the common PAP-Password authentication then add
+user <username> to it. Otherwise you might also change the system name to be
+like your username. The systemname is used for authentication if you do not
+provide the "user" directive. See also pppd manpage.
+
+Note: If you are NOT using pap or chap authentication, you need to put
+      `noauth' in /etc/ppp/peers/provider to allow a connection to be made.
+
+Edit the file /etc/ppp/pap-secrets and put your password into the designated
+location.
+
+You should then be able to start the ppp connection with pon.
+
+If you want to have ppp on bootup then rename the file
+/etc/ppp/no_ppp_on_boot to /etc/ppp/ppp_on_boot.
+
+Inbound Setup (assuming mgetty 0.99 installed)
+----------------------------------------------
+Edit the /etc/ppp/options file and uncomment the nameserver lines. Provide
+the IP addresses that you want the users to use for their name services.
+
+Copy the file /etc/ppp/options.XX so that you have one options file
+for each serial port you run mgetty on. Give each serial port an IP address
+in those files. That way that port is locked into using that IP number.
+Think what consequences that assignment might have for outbound use...
+
+That should be enough for dialup from a Win95 or NT Server. The
+username/password on those system is used for a pap-authentication.
+The /etc/ppp/pap-secrets is already set up for such a situation. Mgetty is
+preconfigured to call pppd with parameters so that the pap-verification will
+be done through the /etc/passwd file.
+
+All your users should now be able to establish ppp connections by just
+specifying phone#, username,password from Win95 etc.
+
+Inbound dialup using dialup Scripts:
+A ppp session can be established from the regular Linux prompt by executing
+/usr/sbin/pppd. The user is limited to use the assigned IP adddress in
+/etc/ppp/options.ttyname and will not be able to override it.
+
+Permissions:
+------------
+Access to PPPD is controlled via the membership in the "dip" group.
+
+Demand Dialup links:
+--------------------
+You need to have the kernel patched in order to support demand dialup with
+the patches for ppp 2.3!!!!
+
+Add the following options to /etc/ppp/peers/provider:
+
+demand idle 600 holdoff 20
+
+to set up demand dialing. 600 seconds (=10 Minutes) idle time disconnects.
+20 seconds between attempts to connect. This setup implies the "persist"
+option. You might also want to enable ppp on boot up so you wont have to
+worry about the ppp connection at all.
+
+Syslog Facility Level:
+----------------------
+
+The default level of LOG_DAEMON has been overridden (as described in the
+pppd(8) man page), to be LOG_LOCAL2.  The intent being thst local2 be sent
+to /var/log/ppp.log for use by plog.
+
+Not implemented:
+----------------
+- Password expiration. Was implemented with a direct call to a non-exported
+  function in libshadow. Why are they doing such things?
+
+Kernel Update
+-------------
+As of version 2.3.1 the kernel stuff is broken. See the file
+
+kernel.fix2.0.30-2 in this directory.
+
+Christoph Lameter, <clameter@debian.org> 22 July 1997
+
--- ppp-2.3.5.orig/debian/ip-down	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/ip-down	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# $Id$
+#
+# This script is run by the pppd _after_ the link is brought down.
+# It uses run-parts to run scripts in /etc/ppp/ip-down.d, so to delete
+# routes, unset IP addresses etc. you should create script(s) there.
+#
+# Be aware that other packages may include /etc/ppp/ip-down.d scripts (named
+# after that package), so choose local script names with that in mind.
+#
+# This script is called with the following arguments:
+#    Arg  Name                          Example
+#    $1   Interface name                ppp0
+#    $2   The tty                       ttyS1
+#    $3   The link speed                38400
+#    $4   Local IP number               12.34.56.78
+#    $5   Peer  IP number               12.34.56.99
+#    $6   Optional ``ipparam'' value    foo
+
+# The  environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_LOCAL="$4"
+PPP_REMOTE="$5"
+PPP_IPPARAM="$6"
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
+
+# as an additional convienince, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=`/usr/bin/basename "$2"`
+export PPP_TTYNAME 
+
+# Main Script starts here
+
+run-parts /etc/ppp/ip-down.d
+
+# last line
--- ppp-2.3.5.orig/debian/ip-up	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/ip-up	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# $Id$
+#
+# This script is run by the pppd after the link is established.
+# It uses run-parts to run scripts in /etc/ppp/ip-up.d, so to add routes,
+# set IP address, run the mailq etc. you should create script(s) there.
+#
+# Be aware that other packages may include /etc/ppp/ip-up.d scripts (named
+# after that package), so choose local script names with that in mind.
+#
+# This script is called with the following arguments:
+#    Arg  Name                          Example
+#    $1   Interface name                ppp0
+#    $2   The tty                       ttyS1
+#    $3   The link speed                38400
+#    $4   Local IP number               12.34.56.78
+#    $5   Peer  IP number               12.34.56.99
+#    $6   Optional ``ipparam'' value    foo
+
+# The  environment is cleared before executing this script
+# so the path must be reset
+PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
+export PATH
+# These variables are for the use of the scripts run by run-parts
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_LOCAL="$4"
+PPP_REMOTE="$5"
+PPP_IPPARAM="$6"
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
+
+
+# as an additional convenience, $PPP_TTYNAME is set to the tty name,
+# stripped of /dev/ (if present) for easier matching.
+PPP_TTYNAME=`/usr/bin/basename "$2"`
+export PPP_TTYNAME 
+
+# Main Script starts here
+
+run-parts /etc/ppp/ip-up.d
+
+# last line
--- ppp-2.3.5.orig/debian/options	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/options	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,278 @@
+# /etc/ppp/options
+# 
+# $Id$
+# 
+# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
+# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
+# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
+#
+# Use the command  egrep -v '#|^ *$' /etc/ppp/options to quickly see what 
+# options are active in this file.
+
+# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
+# Two Servers can be remotely configured
+# ms-dns 192.168.1.1
+# ms-dns 192.168.1.2
+
+# Specify which WINS Servers the incoming connection Win95 or WinNT should use
+# ms-wins 192.168.1.50
+# ms-wins 192.168.1.51
+
+# Run the executable or shell command specified after pppd has
+# terminated the link.  This script could, for example, issue commands
+# to the modem to cause it to hang up if hardware modem control signals
+# were not available.
+#disconnect "chat -- \d+++\d\c OK ath0 OK"
+
+# async character map -- 32-bit hex; each bit is a character
+# that needs to be escaped for pppd to receive it.  0x00000001
+# represents '\x01', and 0x80000000 represents '\x1f'.
+asyncmap 0
+
+# Require the peer to authenticate itself before allowing network
+# packets to be sent or received.
+# Please do not disable this setting. It is expected to be standard in
+# future releases of pppd. Use the call option (see manpage) to disable
+# authentication for specific peers.
+auth
+
+# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
+# on the serial port.
+crtscts
+
+# Use software flow control (i.e. XON/XOFF) to control the flow of data
+# on the serial port.
+#xonxoff
+
+# Specifies that certain characters should be escaped on transmission
+# (regardless of whether the peer requests them to be escaped with its
+# async control character map).  The characters to be escaped are
+# specified as a list of hex numbers separated by commas.  Note that
+# almost any character can be specified for the escape option, unlike
+# the asyncmap option which only allows control characters to be
+# specified.  The characters which may not be escaped are those with hex
+# values 0x20 - 0x3f or 0x5e.
+#escape 11,13,ff
+
+# Don't use the modem control lines.
+#local
+
+# Specifies that pppd should use a UUCP-style lock on the serial device
+# to ensure exclusive access to the device.
+lock
+
+# Use the modem control lines.  On Ultrix, this option implies hardware
+# flow control, as for the crtscts option.  (This option is not fully
+# implemented.)
+modem
+
+# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
+# will ask the peer to send packets of no more than <n> bytes. The
+# minimum MRU value is 128.  The default MRU value is 1500.  A value of
+# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
+# bytes of data).
+#mru 542
+
+# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
+# notation (e.g. 255.255.255.0).
+#netmask 255.255.255.0
+
+# Disables the default behaviour when no local IP address is specified,
+# which is to determine (if possible) the local IP address from the
+# hostname. With this option, the peer will have to supply the local IP
+# address during IPCP negotiation (unless it specified explicitly on the
+# command line or in an options file).
+#noipdefault
+
+# Enables the "passive" option in the LCP.  With this option, pppd will
+# attempt to initiate a connection; if no reply is received from the
+# peer, pppd will then just wait passively for a valid LCP packet from
+# the peer (instead of exiting, as it does without this option).
+#passive
+
+# With this option, pppd will not transmit LCP packets to initiate a
+# connection until a valid LCP packet is received from the peer (as for
+# the "passive" option with old versions of pppd).
+#silent
+
+# Don't request or allow negotiation of any options for LCP and IPCP
+# (use default values).
+#-all
+
+# Disable Address/Control compression negotiation (use default, i.e.
+# address/control field disabled).
+#-ac
+
+# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
+# all control characters).
+#-am
+
+# Don't fork to become a background process (otherwise pppd will do so
+# if a serial device is specified).
+#-detach
+
+# Disable IP address negotiation (with this option, the remote IP
+# address must be specified with an option on the command line or in an
+# options file).
+#-ip
+
+# Disable magic number negotiation.  With this option, pppd cannot
+# detect a looped-back line.
+#-mn
+
+# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
+# 1500).
+#-mru
+
+# Disable protocol field compression negotiation (use default, i.e.
+# protocol field compression disabled).
+#-pc
+
+# Require the peer to authenticate itself using PAP.
+#+pap
+
+# Don't agree to authenticate using PAP.
+#-pap
+
+# Require the peer to authenticate itself using CHAP [Cryptographic
+# Handshake Authentication Protocol] authentication.
+#+chap
+
+# Don't agree to authenticate using CHAP.
+#-chap
+
+# Disable negotiation of Van Jacobson style IP header compression (use
+# default, i.e. no compression).
+#-vj
+
+# Increase debugging level (same as -d).  If this option is given, pppd
+# will log the contents of all control packets sent or received in a
+# readable form.  The packets are logged through syslog with facility
+# daemon and level debug. This information can be directed to a file by
+# setting up /etc/syslog.conf appropriately (see syslog.conf(5)).  (If
+# pppd is compiled with extra debugging enabled, it will log messages
+# using facility local2 instead of daemon).
+#debug
+
+# Append the domain name <d> to the local host name for authentication
+# purposes.  For example, if gethostname() returns the name porsche,
+# but the fully qualified domain name is porsche.Quotron.COM, you would
+# use the domain option to set the domain name to Quotron.COM.
+#domain <d>
+
+# Enable debugging code in the kernel-level PPP driver.  The argument n
+# is a number which is the sum of the following values: 1 to enable
+# general debug messages, 2 to request that the contents of received
+# packets be printed, and 4 to request that the contents of transmitted
+# packets be printed.
+#kdebug n
+
+# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
+# requests a smaller value via MRU negotiation, pppd will request that
+# the kernel networking code send data packets of no more than n bytes
+# through the PPP network interface.
+#mtu <n>
+
+# Enforce the use of the hostname as the name of the local system for
+# authentication purposes (overrides the name option).
+#usehostname
+
+# Set the assumed name of the remote system for authentication purposes
+# to <n>.
+#remotename <n>
+
+# Add an entry to this system's ARP [Address Resolution Protocol]
+# table with the IP address of the peer and the Ethernet address of this
+# system.
+proxyarp
+
+# Use the system password database for authenticating the peer using
+# PAP. Note: mgetty already provides this option. If this is specified
+# then dialin from users using a script under Linux to fire up ppp wont work.
+# login
+
+# If this option is given, pppd will send an LCP echo-request frame to
+# the peer every n seconds. Under Linux, the echo-request is sent when
+# no packets have been received from the peer for n seconds. Normally
+# the peer should respond to the echo-request by sending an echo-reply.
+# This option can be used with the lcp-echo-failure option to detect
+# that the peer is no longer connected.
+lcp-echo-interval 30
+
+# If this option is given, pppd will presume the peer to be dead if n
+# LCP echo-requests are sent without receiving a valid LCP echo-reply.
+# If this happens, pppd will terminate the connection.  Use of this
+# option requires a non-zero value for the lcp-echo-interval parameter.
+# This option can be used to enable pppd to terminate after the physical
+# connection has been broken (e.g., the modem has hung up) in
+# situations where no hardware modem control lines are available.
+lcp-echo-failure 4
+
+# Set the LCP restart interval (retransmission timeout) to <n> seconds
+# (default 3).
+#lcp-restart <n>
+
+# Set the maximum number of LCP terminate-request transmissions to <n>
+# (default 3).
+#lcp-max-terminate <n>
+
+# Set the maximum number of LCP configure-request transmissions to <n>
+# (default 10).
+#lcp-max-configure <n>
+
+# Set the maximum number of LCP configure-NAKs returned before starting
+# to send configure-Rejects instead to <n> (default 10).
+#lcp-max-failure <n>
+
+# Set the IPCP restart interval (retransmission timeout) to <n>
+# seconds (default 3).
+#ipcp-restart <n>
+
+# Set the maximum number of IPCP terminate-request transmissions to <n>
+# (default 3).
+#ipcp-max-terminate <n>
+
+# Set the maximum number of IPCP configure-request transmissions to <n>
+# (default 10).
+#ipcp-max-configure <n>
+
+# Set the maximum number of IPCP configure-NAKs returned before starting
+# to send configure-Rejects instead to <n> (default 10).
+#ipcp-max-failure <n>
+
+# Set the PAP restart interval (retransmission timeout) to <n> seconds
+# (default 3).
+#pap-restart <n>
+
+# Set the maximum number of PAP authenticate-request transmissions to
+# <n> (default 10).
+#pap-max-authreq <n>
+
+# Set the CHAP restart interval (retransmission timeout for
+# challenges) to <n> seconds (default 3).
+#chap-restart <n>
+
+# Set the maximum number of CHAP challenge transmissions to <n>
+# (default 10).
+#chap-max-challenge
+
+# If this option is given, pppd will rechallenge the peer every <n>
+# seconds.
+#chap-interval <n>
+
+# With this option, pppd will accept the peer's idea of our local IP
+# address, even if the local IP address was specified in an option.
+#ipcp-accept-local
+
+# With this option, pppd will accept the peer's idea of its (remote) IP
+# address, even if the remote IP address was specified in an option.
+#ipcp-accept-remote
+
+# Disable the IPXCP and IPX protocols.
+# To let pppd pass IPX packets comment this out --- you'll probably also
+# want to install ipxripd, and have the Internal IPX Network option enabled
+# in your kernel.  /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
+noipx
+
+# ---<End of File>---
+
--- ppp-2.3.5.orig/debian/options.ttyXX	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/options.ttyXX	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,19 @@
+# If you need to set up multiple serial lines then copy
+# this file to
+# options.<ttyname>	for each tty with a modem on it.
+#
+# The options.tty file will assign an IP address to each PPP connection
+# as it comes up. They must all be distinct!
+#
+# Example:
+# options.ttyS1		for com2 under DOS.
+#
+# Edit the following line so that the first IP address
+# mentioned is the is the IP address of your host while the second
+# is the ip address of the serial port
+#
+# I usually use the convention hostname + dash + last 2 character of
+# the ttyname to refer to serial ports.
+# For example servername-s1 for ttyS1 on server "servername"
+
+hostname:hostname-s1
--- ppp-2.3.5.orig/debian/pap-secrets	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/pap-secrets	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,37 @@
+# This is a pap-secrets file to be used with the AUTO_PPP function of mgetty
+# mgetty-0.99 is preconfigured to startup pppd with the login option which
+# will cause pppd to consult /etc/passwd after a user has passed this file
+# Dont be disturbed therfore by the fact that this file defines logins with
+# any password for users. /etc/passwd will catch passwd mismatches.
+#
+# This file should block ALL users that should not be able to do AUTO_PPP!
+# AUTO_PPP bypasses the usual login program so its necessary to list all
+# system userids with regular passwords here!
+#
+# ATTENTION: The definitions here can allow users to login without a
+# password if you dont use the login option of pppd!
+# The /etc/ppp/options file installed has the login option enabled
+
+# INBOUND connections
+
+# Every regular user can use PPP and has to use passwords from /etc/passwd
+*	hostname	""	*
+
+# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
+# other accounts that should not be able to use pppd!
+guest	hostname	"*"	-
+master	hostname	"*"	-
+root	hostname	"*"	-
+support	hostname	"*"	-
+stats	hostname	"*"	-
+
+# OUTBOUND connections
+
+# Here you should add your userid password to connect to your providers via
+# pap. The * means that the password is to be used for ANY host you connect
+# to. Thus you do not have to worry about the foreign machine name. Just
+# replace password with your password.
+# If you have different providers with different passwords then you better
+# remove the following line.
+
+hostname	*	password
--- ppp-2.3.5.orig/debian/plog	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/plog	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,2 @@
+#!/bin/sh
+tail $* /var/log/ppp.log
--- ppp-2.3.5.orig/debian/plog.1	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/plog.1	Tue Feb  2 19:07:33 1999
@@ -0,0 +1 @@
+.so pon.1
--- ppp-2.3.5.orig/debian/poff	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/poff	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# $Id$
+# Written by Phil Hands <phil@hands.com>, distributed under the GNU GPL
+
+SIG=TERM DONE=stopped;
+
+getopts rdch FLAG
+case $FLAG in
+ "r") SIG=HUP  DONE=signalled; shift  ;;
+ "d") SIG=USR1 DONE=signalled; shift ;;
+ "c") SIG=USR2 DONE=signalled; shift ;;
+ "h") cat <<!EOF!
+usage: $0 [options] [provider]
+
+options:
+  -r        cause pppd to drop the line and redial
+  -d        toggles the state of pppd's debug option
+  -c        cause pppd to renegotiate compression
+  -h        this help summary
+!EOF!
+    exit 1
+    ;;
+esac
+
+PROVIDER=$1
+
+
+# Lets see how many pppds are running....
+set -- `cat /var/run/ppp*.pid 2>/dev/null`
+
+case $# in
+  0) # pppd only creates a pid file once ppp is up, so let's try killing pppd
+     # on the assumption that we've not got that far yet.
+     kill -${SIG} `ps axw | egrep "pppd call [[:alnum:]]+" | grep -v grep | awk '{print $1}'`
+     exit 0
+     ;;
+  1) # If only one was running then it can be killed using the pid
+     kill -${SIG} $1
+     exit 0
+     ;;
+  *) # More than one! Aieehh.. We have to use ps to figure it out.
+     # If no arguments were specified, then assume the 'provider' default.
+     PID=`ps axw | egrep "pppd call ${PROVIDER:-provider}[[:space:]]*\$" | grep -v grep | awk '{print $1}'`
+     if [ $PID ]; then
+        kill -${SIG} ${PID}
+        exit 0
+     else
+        echo "I could not find a pppd process or provider '${PROVIDER:-provider}'. None ${DONE}"
+        exit 1
+     fi
+     ;;
+esac
--- ppp-2.3.5.orig/debian/poff.1	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/poff.1	Tue Feb  2 19:07:33 1999
@@ -0,0 +1 @@
+.so pon.1
--- ppp-2.3.5.orig/debian/pon	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/pon	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,2 @@
+#!/bin/sh
+/usr/sbin/pppd call ${1:-provider}
--- ppp-2.3.5.orig/debian/pon.1	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/pon.1	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,44 @@
+.Id $Id$
+.TH PLOG 1 "Oct 1996" local "Linux Programmer's Manual"
+.SH NAME
+pon, poff, plog \- startup, shutdown, or list the log of the PPP connection.
+.SH SYNOPSIS
+.B pon
+.br
+.B poff
+.br
+.B plog
+.SH DESCRIPTION
+.B pon
+and
+.B poff
+switch the ppp connection on and off. Progress and logged events related to
+the ppp connection can be viewed using
+.B plog
+.SH REQUIREMENTS FOR the p-commands to work
+.TP 8
+.B /etc/ppp/chatscripts/provider
+must contain the correct chatscript to connect to your provider. All users
+that are supposed to be able to use the p-commands should have read access
+to this file.
+.br
+.TP 8
+.B /etc/ppp/options
+contains the options for ppp to connect to your provider. This file also
+must be readable by all users who should be able to use the p-commands.
+.SH FILES
+.I /etc/ppp/chatscripts/provider
+.br
+.I /etc/ppp/peers/provider
+.br
+.I /etc/ppp/options
+.br
+.I /var/log/ppp.log
+.br
+.I /etc/ppp/pap-secrets
+.br
+.I /etc/ppp/chap-secrets
+.SH SEE ALSO
+pppd(8), chat(8), and the documentation in /usr/doc/ppp
+.SH AUTHOR
+The p-commands were written by Christoph Lameter <clameter@debian.org>
--- ppp-2.3.5.orig/debian/ppp-2.3.0.STATIC.README	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/ppp-2.3.0.STATIC.README	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,54 @@
+
+ppp-2.3.0-static.diff
+
+	Patch to ppp-2.3.0 to support using static IP addresses with 
+        Mgetty and AutoPPP.  Does not affect normal dynamic assignments.
+        This patch is for 2.3.0 only and not very well tested, comments 
+        welcome. Apply with "patch -p1" in the top directory of the 
+        ppp-2.3.0 sources. After getting ppp-2.3.0 to compile cleanly on
+        your system, patch and re-compile.  (No need to re-compile kernel)
+        While the patches should work with any authentication method, we 
+        did not have success getting 2.3.0 to work with USE_PAM=1 option. 
+        (Out of the box). We use shadow passwords and "make HAS_SHADOW=1". 
+        Bottom line...you should get ppp-2.3.0 working BEFORE you apply 
+        the patches.        
+
+        After patching and re-compiling, update the pap-secrets file to 
+        contain the entries of those users you want to have static 
+        IP addresses. Typical entry might look like:
+
+        #client     server     secret     IP addresses
+         jdoe         *        realpswd   207.69.189.15 
+           *          *         ""            *
+         
+        Also, inform your static IP users to include their IP when
+        connecting. ex: pppd 207.69.189.15:
+        Or for Windows folks "check"  Specify an IP address.
+
+  Note: The second line is what most folks will use to authenticate
+        users who will be dynamically assigned their addresses by 
+        /dev/ttyXX. This along with the login option allows users to 
+        be PAP authenticated against the /etc/passwd or /etc/shadow.
+        If you enter each and every user into your pap-secrets file
+        and do not have the last line,(wildcards line) you MUST place
+        a "*" at the end of each users line.  Without it authentication
+        will fail.  For example:
+
+        #client     server     secret     IP addresses
+         jdoe         *        passwd     207.69.189.15 *
+
+        This "*" at the end allows the patches to work properly without
+        changing the normal process.  The IP address is normally assigned
+        via the /etc/ppp/options.ttyXX file. The patches do not interfere
+        with this process at all.  The only thing different is when the
+        user tells pppd he has his own address, pppd will allow him to use
+        it, if he and his address are authenticated via the pap-secrets file.
+        The only thing to remember, is tell your static IP users to set the 
+        "correct" IP or they will be assigned the normal dynamic address. 
+        (And of course that's not what we want) :>)  If you have any 
+        questions....
+
+While I tested this as many ways as our systems would allow, no warranty 
+is implied.  They work well for us.  
+
+Jeff Myers <jmyers@southcom.net>
--- ppp-2.3.5.orig/debian/provider	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/provider	Tue Feb  2 19:59:00 1999
@@ -0,0 +1,21 @@
+# These are the options to dial out to your service provider
+# Please customize them correctly. Only the "provider" file will
+# be handled by poff and pon.
+
+# You usually need this if there is no PAP authentication
+noauth
+
+# The chatscript (be sure to edit that file too)
+connect "/usr/sbin/chat -v -f /etc/ppp/chatscripts/provider"
+
+# Routing
+defaultroute
+
+# Default Modem (you better replace this with /dev/ttySx!)
+/dev/modem
+
+# Speed
+38400
+
+# Keep Modem up even if connection fails
+persist
--- ppp-2.3.5.orig/debian/provider.chatscript	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/provider.chatscript	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,7 @@
+ABORT        BUSY
+ABORT        "NO CARRIER"
+ABORT        VOICE
+ABORT	     "NO DIALTONE"
+""           ATDT<edit phone number here>
+ogin         <put login name here>
+word         \q<put password here>
--- ppp-2.3.5.orig/debian/win95.ppp	Thu Jan  1 01:00:00 1970
+++ ppp-2.3.5/debian/win95.ppp	Tue Feb  2 19:07:33 1999
@@ -0,0 +1,42 @@
+Short Guide on How to run a Win95 Connection with PPPD to Debian Linux
+----------------------------------------------------------------------
+
+1. Do not mess around with the Win95 configuration.
+   Do not manually configure DNS, Scripts etc.
+   Do not switch on the terminal windows.
+   Accept all defaults or better leave it as
+   it was at installation.
+
+2. You need to have a getty program that supports
+   automatic PPP protocol detection such as mgetty-0.99
+ 
+   You also need to have a pppd that supports remote DNS configuration.
+   The ppp usually coming with Debian has these options since ppp-2.2.0f-4
+
+   Without the extended ppp you still have to configure the DNS Server
+   on the Win95 wanting to connect to your Debian Linux Box.
+
+3. Configure PPP on Debian
+     A) Change the dns lines in /etc/ppp/options and review the
+        complete file for things you need to do.
+
+     B) Make sure that your /etc/ppp/pap-secrets file is set
+        up correctly. It should allow your users in /etc/passwd
+	to establish ppp connections without a password. pppd will
+	check against /etc/passwd too!
+        The pap-secrets installed by this package is set up correctly
+        to handle user logins via pap.
+	If you are having trouble with authentication then remove
+	/etc/ppp/pap-secrets completely and it will usually work.
+
+4. Win95 PPP Dialup
+	Click on Dialup-Connection
+	A. Enter phone number of your linux server
+	B. Enter username when prompted
+	C. Enter password when prompted
+
+Win95 should connect to your Linux PPPD without problems and automatically
+configure all IP-Addresses, Netmasks and DNS Servers. You can immediately
+start Netscape, Internet Explorer or any other TCP/IP tools.
+
+Christoph Lameter, September 27, 1996 (clameter@debian.org)