--- php-5.3.29/sapi/fpm/php-fpm.conf.in~ 2014-08-13 22:22:50.000000000 +0300 +++ php-5.3.29/sapi/fpm/php-fpm.conf.in 2014-10-27 07:43:44.223007095 +0200 @@ -6,14 +6,6 @@ ; prefix (@prefix@). This prefix can be dynamicaly changed by using the ; '-p' argument from the command line. -; Include one or more files. If glob(3) exists, it is used to include a bunch of -; files from a glob(3) pattern. This directive can be used everywhere in the -; file. -; Relative path can also be used. They will be prefixed by: -; - the global prefix if it's been set (-p arguement) -; - @prefix@ otherwise -;include=etc/fpm.d/*.conf - ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; @@ -116,395 +108,10 @@ ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) -; Start a new pool named 'www'. -; the variable $pool can we used in any directive and will be replaced by the -; pool name ('www' here) -[www] - -; Per pool prefix -; It only applies on the following directives: -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or @php_fpm_prefix@) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = @php_fpm_user@ -group = @php_fpm_group@ - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses on a -; specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = 127.0.0.1:9000 - -; Set listen(2) backlog. A value of '-1' means unlimited. -; Default Value: 128 (-1 on FreeBSD and OpenBSD) -;listen.backlog = -1 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -;listen.owner = @php_fpm_user@ -;listen.group = @php_fpm_group@ -;listen.mode = 0660 - -; List of ipv4 addresses of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; priority = -19 - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 5 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 1 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 3 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: @EXPANDED_DATADIR@/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: ouput header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_terminate_timeout = 0 - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -;chdir = /var/www - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; exectute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or @prefix@) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M +; Include one or more files. If glob(3) exists, it is used to include a bunch of +; files from a glob(3) pattern. This directive can be used everywhere in the +; file. +; Relative path can also be used. They will be prefixed by: +; - the global prefix if it's been set (-p arguement) +; - @prefix@ otherwise +include=/etc/php/fpm.d/*.conf --- /dev/null 2007-02-13 18:29:53.000000000 +0200 +++ php-5.3.29/sapi/fpm/php-fpm.conf-d.in 2014-10-27 07:42:26.259454585 +0200 @@ -0,0 +1,392 @@ +; Start a new pool named 'www'. +; the variable $pool can we used in any directive and will be replaced by the +; pool name ('www' here) +[www] + +; Per pool prefix +; It only applies on the following directives: +; - 'slowlog' +; - 'listen' (unixsocket) +; - 'chroot' +; - 'chdir' +; - 'php_values' +; - 'php_admin_values' +; When not set, the global prefix (or @php_fpm_prefix@) applies instead. +; Note: This directive can also be relative to the global prefix. +; Default Value: none +;prefix = /path/to/pools/$pool + +; Unix user/group of processes +; Note: The user is mandatory. If the group is not set, the default user's group +; will be used. +user = @php_fpm_user@ +group = @php_fpm_group@ + +; The address on which to accept FastCGI requests. +; Valid syntaxes are: +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses on a +; specific port; +; '/path/to/unix/socket' - to listen on a unix socket. +; Note: This value is mandatory. +listen = 127.0.0.1:9000 + +; Set listen(2) backlog. A value of '-1' means unlimited. +; Default Value: 128 (-1 on FreeBSD and OpenBSD) +;listen.backlog = -1 + +; Set permissions for unix socket, if one is used. In Linux, read/write +; permissions must be set in order to allow connections from a web server. Many +; BSD-derived systems allow connections regardless of permissions. +; Default Values: user and group are set as the running user +; mode is set to 0660 +;listen.owner = @php_fpm_user@ +;listen.group = @php_fpm_group@ +;listen.mode = 0660 + +; List of ipv4 addresses of FastCGI clients which are allowed to connect. +; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original +; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address +; must be separated by a comma. If this value is left blank, connections will be +; accepted from any ip address. +; Default Value: any +;listen.allowed_clients = 127.0.0.1 + +; Specify the nice(2) priority to apply to the pool processes (only if set) +; The value can vary from -19 (highest priority) to 20 (lower priority) +; Note: - It will only work if the FPM master process is launched as root +; - The pool processes will inherit the master process priority +; unless it specified otherwise +; Default Value: no set +; priority = -19 + +; Choose how the process manager will control the number of child processes. +; Possible Values: +; static - a fixed number (pm.max_children) of child processes; +; dynamic - the number of child processes are set dynamically based on the +; following directives. With this process management, there will be +; always at least 1 children. +; pm.max_children - the maximum number of children that can +; be alive at the same time. +; pm.start_servers - the number of children created on startup. +; pm.min_spare_servers - the minimum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is less than this +; number then some children will be created. +; pm.max_spare_servers - the maximum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is greater than this +; number then some children will be killed. +; ondemand - no children are created at startup. Children will be forked when +; new requests will connect. The following parameter are used: +; pm.max_children - the maximum number of children that +; can be alive at the same time. +; pm.process_idle_timeout - The number of seconds after which +; an idle process will be killed. +; Note: This value is mandatory. +pm = dynamic + +; The number of child processes to be created when pm is set to 'static' and the +; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. +; This value sets the limit on the number of simultaneous requests that will be +; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. +; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP +; CGI. The below defaults are based on a server without much resources. Don't +; forget to tweak pm.* to fit your needs. +; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' +; Note: This value is mandatory. +pm.max_children = 5 + +; The number of child processes created on startup. +; Note: Used only when pm is set to 'dynamic' +; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 +pm.start_servers = 2 + +; The desired minimum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.min_spare_servers = 1 + +; The desired maximum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.max_spare_servers = 3 + +; The number of seconds after which an idle process will be killed. +; Note: Used only when pm is set to 'ondemand' +; Default Value: 10s +;pm.process_idle_timeout = 10s; + +; The number of requests each child process should execute before respawning. +; This can be useful to work around memory leaks in 3rd party libraries. For +; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. +; Default Value: 0 +;pm.max_requests = 500 + +; The URI to view the FPM status page. If this value is not set, no URI will be +; recognized as a status page. It shows the following informations: +; pool - the name of the pool; +; process manager - static, dynamic or ondemand; +; start time - the date and time FPM has started; +; start since - number of seconds since FPM has started; +; accepted conn - the number of request accepted by the pool; +; listen queue - the number of request in the queue of pending +; connections (see backlog in listen(2)); +; max listen queue - the maximum number of requests in the queue +; of pending connections since FPM has started; +; listen queue len - the size of the socket queue of pending connections; +; idle processes - the number of idle processes; +; active processes - the number of active processes; +; total processes - the number of idle + active processes; +; max active processes - the maximum number of active processes since FPM +; has started; +; max children reached - number of times, the process limit has been reached, +; when pm tries to start more children (works only for +; pm 'dynamic' and 'ondemand'); +; Value are updated in real time. +; Example output: +; pool: www +; process manager: static +; start time: 01/Jul/2011:17:53:49 +0200 +; start since: 62636 +; accepted conn: 190460 +; listen queue: 0 +; max listen queue: 1 +; listen queue len: 42 +; idle processes: 4 +; active processes: 11 +; total processes: 15 +; max active processes: 12 +; max children reached: 0 +; +; By default the status page output is formatted as text/plain. Passing either +; 'html', 'xml' or 'json' in the query string will return the corresponding +; output syntax. Example: +; http://www.foo.bar/status +; http://www.foo.bar/status?json +; http://www.foo.bar/status?html +; http://www.foo.bar/status?xml +; +; By default the status page only outputs short status. Passing 'full' in the +; query string will also return status for each pool process. +; Example: +; http://www.foo.bar/status?full +; http://www.foo.bar/status?json&full +; http://www.foo.bar/status?html&full +; http://www.foo.bar/status?xml&full +; The Full status returns for each process: +; pid - the PID of the process; +; state - the state of the process (Idle, Running, ...); +; start time - the date and time the process has started; +; start since - the number of seconds since the process has started; +; requests - the number of requests the process has served; +; request duration - the duration in µs of the requests; +; request method - the request method (GET, POST, ...); +; request URI - the request URI with the query string; +; content length - the content length of the request (only with POST); +; user - the user (PHP_AUTH_USER) (or '-' if not set); +; script - the main script called (or '-' if not set); +; last request cpu - the %cpu the last request consumed +; it's always 0 if the process is not in Idle state +; because CPU calculation is done when the request +; processing has terminated; +; last request memory - the max amount of memory the last request consumed +; it's always 0 if the process is not in Idle state +; because memory calculation is done when the request +; processing has terminated; +; If the process is in Idle state, then informations are related to the +; last request the process has served. Otherwise informations are related to +; the current request being served. +; Example output: +; ************************ +; pid: 31330 +; state: Running +; start time: 01/Jul/2011:17:53:49 +0200 +; start since: 63087 +; requests: 12808 +; request duration: 1250261 +; request method: GET +; request URI: /test_mem.php?N=10000 +; content length: 0 +; user: - +; script: /home/fat/web/docs/php/test_mem.php +; last request cpu: 0.00 +; last request memory: 0 +; +; Note: There is a real-time FPM status monitoring sample web page available +; It's available in: @EXPANDED_DATADIR@/fpm/status.html +; +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;pm.status_path = /status + +; The ping URI to call the monitoring page of FPM. If this value is not set, no +; URI will be recognized as a ping page. This could be used to test from outside +; that FPM is alive and responding, or to +; - create a graph of FPM availability (rrd or such); +; - remove a server from a group if it is not responding (load balancing); +; - trigger alerts for the operating team (24/7). +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;ping.path = /ping + +; This directive may be used to customize the response of a ping request. The +; response is formatted as text/plain with a 200 response code. +; Default Value: pong +;ping.response = pong + +; The access log file +; Default: not set +;access.log = log/$pool.access.log + +; The access log format. +; The following syntax is allowed +; %%: the '%' character +; %C: %CPU used by the request +; it can accept the following format: +; - %{user}C for user CPU only +; - %{system}C for system CPU only +; - %{total}C for user + system CPU (default) +; %d: time taken to serve the request +; it can accept the following format: +; - %{seconds}d (default) +; - %{miliseconds}d +; - %{mili}d +; - %{microseconds}d +; - %{micro}d +; %e: an environment variable (same as $_ENV or $_SERVER) +; it must be associated with embraces to specify the name of the env +; variable. Some exemples: +; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e +; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e +; %f: script filename +; %l: content-length of the request (for POST request only) +; %m: request method +; %M: peak of memory allocated by PHP +; it can accept the following format: +; - %{bytes}M (default) +; - %{kilobytes}M +; - %{kilo}M +; - %{megabytes}M +; - %{mega}M +; %n: pool name +; %o: ouput header +; it must be associated with embraces to specify the name of the header: +; - %{Content-Type}o +; - %{X-Powered-By}o +; - %{Transfert-Encoding}o +; - .... +; %p: PID of the child that serviced the request +; %P: PID of the parent of the child that serviced the request +; %q: the query string +; %Q: the '?' character if query string exists +; %r: the request URI (without the query string, see %q and %Q) +; %R: remote IP address +; %s: status (response code) +; %t: server time the request was received +; it can accept a strftime(3) format: +; %d/%b/%Y:%H:%M:%S %z (default) +; %T: time the log has been written (the request has finished) +; it can accept a strftime(3) format: +; %d/%b/%Y:%H:%M:%S %z (default) +; %u: remote user +; +; Default: "%R - %u %t \"%m %r\" %s" +;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" + +; The log file for slow requests +; Default Value: not set +; Note: slowlog is mandatory if request_slowlog_timeout is set +;slowlog = log/$pool.log.slow + +; The timeout for serving a single request after which a PHP backtrace will be +; dumped to the 'slowlog' file. A value of '0s' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_slowlog_timeout = 0 + +; The timeout for serving a single request after which the worker process will +; be killed. This option should be used when the 'max_execution_time' ini option +; does not stop script execution for some reason. A value of '0' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_terminate_timeout = 0 + +; Set open file descriptor rlimit. +; Default Value: system defined value +;rlimit_files = 1024 + +; Set max core size rlimit. +; Possible Values: 'unlimited' or an integer greater or equal to 0 +; Default Value: system defined value +;rlimit_core = 0 + +; Chroot to this directory at the start. This value must be defined as an +; absolute path. When this value is not set, chroot is not used. +; Note: you can prefix with '$prefix' to chroot to the pool prefix or one +; of its subdirectories. If the pool prefix is not set, the global prefix +; will be used instead. +; Note: chrooting is a great security feature and should be used whenever +; possible. However, all PHP paths will be relative to the chroot +; (error_log, sessions.save_path, ...). +; Default Value: not set +;chroot = + +; Chdir to this directory at the start. +; Note: relative path can be used. +; Default Value: current directory or / when chroot +;chdir = /var/www + +; Redirect worker stdout and stderr into main error log. If not set, stdout and +; stderr will be redirected to /dev/null according to FastCGI specs. +; Note: on highloaded environement, this can cause some delay in the page +; process time (several ms). +; Default Value: no +;catch_workers_output = yes + +; Limits the extensions of the main script FPM will allow to parse. This can +; prevent configuration mistakes on the web server side. You should only limit +; FPM to .php extensions to prevent malicious users to use other extensions to +; exectute php code. +; Note: set an empty value to allow all extensions. +; Default Value: .php +;security.limit_extensions = .php .php3 .php4 .php5 + +; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from +; the current environment. +; Default Value: clean env +;env[HOSTNAME] = $HOSTNAME +;env[PATH] = /usr/local/bin:/usr/bin:/bin +;env[TMP] = /tmp +;env[TMPDIR] = /tmp +;env[TEMP] = /tmp + +; Additional php.ini defines, specific to this pool of workers. These settings +; overwrite the values previously defined in the php.ini. The directives are the +; same as the PHP SAPI: +; php_value/php_flag - you can set classic ini defines which can +; be overwritten from PHP call 'ini_set'. +; php_admin_value/php_admin_flag - these directives won't be overwritten by +; PHP call 'ini_set' +; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. + +; Defining 'extension' will load the corresponding shared extension from +; extension_dir. Defining 'disable_functions' or 'disable_classes' will not +; overwrite previously defined php.ini values, but will append the new value +; instead. + +; Note: path INI options can be relative and will be expanded with the prefix +; (pool, global or @prefix@) + +; Default Value: nothing is defined by default except the values in php.ini and +; specified at startup with the -d argument +;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com +;php_flag[display_errors] = off +;php_admin_value[error_log] = /var/log/fpm-php.www.log +;php_admin_flag[log_errors] = on +;php_admin_value[memory_limit] = 32M --- php-5.3.27/sapi/fpm/config.m4~ 2013-12-05 20:55:36.000000000 +0200 +++ php-5.3.27/sapi/fpm/config.m4 2013-12-05 20:56:08.277968372 +0200 @@ -583,7 +583,7 @@ AC_DEFINE_UNQUOTED(PHP_FPM_USER, "$php_fpm_user", [fpm user name]) AC_DEFINE_UNQUOTED(PHP_FPM_GROUP, "$php_fpm_group", [fpm group name]) - PHP_OUTPUT(sapi/fpm/php-fpm.conf sapi/fpm/init.d.php-fpm sapi/fpm/php-fpm.service sapi/fpm/php-fpm.8 sapi/fpm/status.html) + PHP_OUTPUT(sapi/fpm/php-fpm.conf sapi/fpm/php-fpm.conf-d sapi/fpm/init.d.php-fpm sapi/fpm/php-fpm.service sapi/fpm/php-fpm.8 sapi/fpm/status.html) PHP_ADD_MAKEFILE_FRAGMENT([$abs_srcdir/sapi/fpm/Makefile.frag], [$abs_srcdir/sapi/fpm], [sapi/fpm]) SAPI_FPM_PATH=sapi/fpm/php-fpm --- php-5.3.29/sapi/fpm/Makefile.frag~ 2014-08-13 22:22:50.000000000 +0300 +++ php-5.3.29/sapi/fpm/Makefile.frag 2014-10-27 07:39:22.354406805 +0200 @@ -19,9 +19,10 @@ @$(INSTALL) -m 0755 $(SAPI_FPM_PATH) $(INSTALL_ROOT)$(sbindir)/$(program_prefix)php-fpm$(program_suffix)$(EXEEXT) @echo "Installing PHP FPM config: $(INSTALL_ROOT)$(sysconfdir)/" && \ - $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir) || : + $(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir)/fpm.d || : @$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf.default || : + @$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf || : @echo "Installing PHP FPM man page: $(INSTALL_ROOT)$(mandir)/man8/" @$(mkinstalldirs) $(INSTALL_ROOT)$(mandir)/man8