- make it possible to coinstall phpXY-pdo-pgsql

[packages/php.git] / php-ini.patch

--- php-5.2.8/php.ini-dist	2008-11-28 21:07:09.000000000 +0200
+++ php-5.2.8/php.ini	2009-01-05 14:53:55.914702890 +0200
@@ -3,13 +3,18 @@
 ;;;;;;;;;;;
 ; WARNING ;
 ;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
+; This is the default settings file for new PHP installations from
+; PLD Linux Distribution.
+; It's based mainly on php.ini-dist, but with some changes made with
+; security in mind (see below, consult also
+; http://php.net/manual/en/security.php).
+;
+; Please note, that in PLD installations /etc/php/php.ini file
+; contains global settings for all SAPIs (cgi, cli, apache...),
+; and after reading this file, SAPI-specific file (/etc/php/php-cgi.ini,
+; /etc/php/php-cli.ini, /etc/php/php-apache.ini...) is INCLUDED
+; (so you don't have to duplicate whole large file to override only
+; few options)
 
 ;;;;;;;;;;;;;;;;;;;
 ; About php.ini   ;
@@ -59,10 +64,72 @@
 ;;;;;;;;;;;;;;;;;;;
 ; About this file ;
 ;;;;;;;;;;;;;;;;;;;
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
 
+; Below is the list of settings changed from default as specified in
+; php.ini-recommended. These settings make PHP more secure and encourage
+; cleaner coding.
+; The price is that with these settings, PHP may be incompatible with some old
+; or bad-written applications, and sometimes, more difficult to develop with.
+; Using this settings is warmly recommended for production sites.  As all of
+; the changes from the standard settings are thoroughly documented, you can
+; go over each one, and decide whether you want to use it or not.
+;
+; - register_globals = Off         [Security, Performance]
+;     Global variables are no longer registered for input data (POST, GET, cookies,
+;     environment and other server variables).  Instead of using $foo, you must use
+;     you can use $_REQUEST["foo"] (includes any variable that arrives through the
+;     request, namely, POST, GET and cookie variables), or use one of the specific
+;     $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
+;     on where the input originates.  Also, you can look at the
+;     import_request_variables() function.
+;     Note that register_globals = Off is the default setting since PHP 4.2.0.
+; - display_errors = Off           [Security]
+;     With this directive set to off, errors that occur during the execution of
+;     scripts will no longer be displayed as a part of the script output, and thus,
+;     will no longer be exposed to remote users.  With some errors, the error message
+;     content may expose information about your script, web server, or database
+;     server that may be exploitable for hacking.  Production sites should have this
+;     directive set to off.
+; - log_errors = On                [Security]
+;     This directive complements the above one.  Any errors that occur during the
+;     execution of your script will be logged (typically, to your server's error log,
+;     but can be configured in several ways).  Along with setting display_errors to off,
+;     this setup gives you the ability to fully understand what may have gone wrong,
+;     without exposing any sensitive information to remote users.
+; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
+;     By default, PHP surpresses errors of type E_NOTICE.  These error messages
+;     are emitted for non-critical errors, but that could be a symptom of a bigger
+;     problem.  Most notably, this will cause error messages about the use
+;     of uninitialized variables to be displayed.
+; - register_argc_argv = Off       [Performance]
+;     Disables registration of the somewhat redundant $argv and $argc global
+;     variables.
+; - magic_quotes_gpc = Off         [Performance]
+;     Input data is no longer escaped with slashes so that it can be sent into
+;     SQL databases without further manipulation.  Instead, you should use the
+;     function addslashes() on each input element you wish to send to a database.
+; - variables_order = "GPCS"       [Performance]
+;     The environment variables are not hashed into the $HTTP_ENV_VARS[].  To access
+;     environment variables, you can use getenv() instead.
+
+; For completeness, below is list of the rest of changes recommended for
+; performance, but NOT applied in default php.ini in PLD (since they are
+; not needed for security or may cause problems with some applications
+; more likely than above).
+
+; - output_buffering = 4096        [Performance]
+;     Set a 4KB output buffer.  Enabling output buffering typically results in less
+;     writes, and sometimes less packets sent on the wire, which can often lead to
+;     better performance.  The gain this directive actually yields greatly depends
+;     on which Web server you're working with, and what kind of scripts you're using.
+; - allow_call_time_pass_reference = Off     [Code cleanliness]
+;     It's not possible to decide to force a variable to be passed by reference
+;     when calling a function.  The PHP 4 style to do this is by making the
+;     function require the relevant argument by reference.
 
 ;;;;;;;;;;;;;;;;;;;;
 ; Language Options ;
@@ -86,7 +153,7 @@
 asp_tags = Off
 
 ; The number of significant digits displayed in floating point numbers.
-precision    =  12
+precision    =  14
 
 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
 y2k_compliance = On
@@ -245,7 +312,7 @@
 ; (e.g. by adding its signature to the Web server header).  It is no security
 ; threat in any way, but it makes it possible to determine whether you use PHP
 ; on your server or not.
-expose_php = On
+expose_php = Off
 
 
 ;;;;;;;;;;;;;;;;;;;
@@ -302,7 +369,9 @@
 ;
 ;   - Show all errors except for notices and coding standards warnings
 ;
-error_reporting = E_ALL & ~E_NOTICE
+;error_reporting  =  E_ALL & ~E_NOTICE
+
+error_reporting  =  E_ALL

 ; Print out errors (as a part of the output).  For production web sites,
 ; you're strongly encouraged to turn this feature off, and use error logging
@@ -319,7 +388,7 @@
 ;
 ; stdout (On) - Display errors to STDOUT
 ;
-display_errors = On
+display_errors = Off
 
 ; Even when display_errors is on, errors that occur during PHP's startup
 ; sequence are not displayed.  It's strongly recommended to keep
@@ -329,7 +398,7 @@
 ; Log errors into a log file (server-specific log, stderr, or error_log (below))
 ; As stated above, you're strongly advised to use error logging in place of
 ; error displaying on production web sites.
-log_errors = Off
+log_errors = On
 
 ; Set maximum length of log_errors. In error_log information about the source is
 ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
@@ -352,7 +421,7 @@
 ;report_zend_debug = 0
 
 ; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
+track_errors = On
 
 ; Turn off normal error reporting and emit XML-RPC error XML
 ;xmlrpc_errors = 0
@@ -361,7 +430,7 @@
 
 ; Disable the inclusion of HTML tags in error messages.
 ; Note: Never use this feature for production boxes.
-;html_errors = Off
+html_errors = Off
 
 ; If html_errors is set On PHP produces clickable error messages that direct
 ; to a page describing the error or function causing the error in detail.
@@ -405,7 +474,7 @@
 ; Environment and Built-in variables (G, P, C, E & S respectively, often
 ; referred to as EGPCS or GPC).  Registration is done from left to right, newer
 ; values override older values.
-variables_order = "EGPCS"
+variables_order = "GPCS"
 
 ; Whether or not to register the EGPCS variables as global variables.  You may
 ; want to turn this off if you don't want to clutter your scripts' global scope
@@ -421,12 +490,12 @@
 ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
 ; and friends.  If you're not using them, it's recommended to turn them off,
 ; for performance reasons.
-register_long_arrays = On
+register_long_arrays = Off
 
 ; This directive tells PHP whether to declare the argv&argc variables (that
 ; would contain the GET information).  If you don't use these variables, you
 ; should turn it off for increased performance.
-register_argc_argv = On
+register_argc_argv = Off
 
 ; When enabled, the SERVER and ENV variables are created when they're first
 ; used (Just In Time) instead of when the script starts. If these variables
@@ -442,7 +511,7 @@
 ;
 
 ; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
+magic_quotes_gpc = Off
 
 ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
 magic_quotes_runtime = Off
@@ -488,55 +557,13 @@
 user_dir =
 
 ; Directory in which the loadable extensions (modules) reside.
-extension_dir = "./"
+extension_dir = "/usr/lib/php"
 
 ; Whether or not to enable the dl() function.  The dl() function does NOT work
 ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
 ; disabled on them.
 enable_dl = On
 
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers.  Left undefined, PHP turns this on by default.  You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution.  Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
-; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=0
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client.  This allows IIS to define the
-; security context that the request runs under.  mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS.  Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
 ;;;;;;;;;;;;;;;;
 ; File Uploads ;
 ;;;;;;;;;;;;;;;;
@@ -630,59 +630,6 @@
 ; needs to go here.  Specify the location of the extension with the
 ; extension_dir directive above.
 
-
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_dbase.dll
-;extension=php_fdf.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_ifx.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-;extension=php_ming.dll
-;extension=php_msql.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll
-;extension=php_openssl.dll
-;extension=php_pdo.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_oci8.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
 ;;;;;;;;;;;;;;;;;;;
 ; Module Settings ;
 ;;;;;;;;;;;;;;;;;;;
@@ -776,6 +750,9 @@
 ; Maximum time (in seconds) for connect timeout. -1 means no limit
 mysql.connect_timeout = 60
 
+; The name of the character set to use as the default character set.
+;mysql.connect_charset=utf8
+
 ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
 ; SQL-Errors will be displayed.
 mysql.trace_mode = Off
@@ -795,6 +772,9 @@
 ; MySQL defaults.
 mysqli.default_socket =
 
+; The name of the character set to use as the default character set.
+;mysqli.connect_charset=utf8
+
 ; Default host for mysql_connect() (doesn't apply in safe mode).
 mysqli.default_host =
 
@@ -811,6 +791,10 @@
 ; Allow or prevent reconnect
 mysqli.reconnect = Off
 
+[pdo_mysql]
+; The name of the character set to use as the default character set.
+;pdo_mysql.connect_charset=utf8
+
 [mSQL]
 ; Allow or prevent persistent links.
 msql.allow_persistent = On
@@ -920,7 +904,7 @@
 bcmath.scale = 0
 
 [browscap]
-;browscap = extra/browscap.ini
+;browscap = /usr/share/browscap/php_browscap.ini
 
 [Informix]
 ; Default host for ifx_connect() (doesn't apply in safe mode).
@@ -1273,7 +1257,7 @@
 ; Enables or disables WSDL caching feature.
 soap.wsdl_cache_enabled=1
 ; Sets the directory name where SOAP extension will put cache files.
-soap.wsdl_cache_dir="/tmp"
+soap.wsdl_cache_dir="/var/cache/php"
 ; (time to live) Sets the number of second while cached file will be used 
 ; instead of original one.
 soap.wsdl_cache_ttl=86400