up to 5.3.29, PHP_5_3 EOL, this is last official planned release

[packages/php.git] / fpm-conf-split.patch

--- php-5.3.27/sapi/fpm/php-fpm.conf.in~	2013-12-05 17:20:34.000000000 +0200
+++ php-5.3.27/sapi/fpm/php-fpm.conf.in	2013-12-05 20:51:02.914438767 +0200
@@ -7,14 +7,6 @@
 ; prefix (@prefix@). This prefix can be dynamicaly changed by using the
 ; '-p' argument from the command line.
 
-; Include one or more files. If glob(3) exists, it is used to include a bunch of
-; files from a glob(3) pattern. This directive can be used everywhere in the
-; file.
-; Relative path can also be used. They will be prefixed by:
-;  - the global prefix if it's been set (-p arguement)
-;  - @prefix@ otherwise
-;include=/etc/php/fpm.d/*.conf
-
 ;;;;;;;;;;;;;;;;;;
 ; Global Options ;
 ;;;;;;;;;;;;;;;;;;
@@ -116,396 +108,11 @@
 ; ports and different management options.  The name of the pool will be
 ; used in logs and stats. There is no limitation on the number of pools which
 ; FPM can handle. Your system will tell you anyway :)
-
-; Start a new pool named 'www'.
-; the variable $pool can we used in any directive and will be replaced by the
-; pool name ('www' here)
-[www]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or @php_fpm_prefix@) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
-user = @php_fpm_user@
-group = @php_fpm_group@
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses on a
-;                            specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = /var/run/php/@processname@.sock
-
-; Set listen(2) backlog. A value of '-1' means unlimited.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = -1
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions. 
-; Default Values: user and group are set as the running user
-;                 mode is set to 0660
-;listen.owner = @php_fpm_user@
-;listen.group = @php_fpm_group@
-;listen.mode = 0660
- 
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Note: - It will only work if the FPM master process is launched as root
-;       - The pool processes will inherit the master process priority
-;         unless it specified otherwise
-; Default Value: no set
-; priority = -19
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 5
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 2
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 2
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 5
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
- 
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
 ;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example: 
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: @EXPANDED_DATADIR@/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set 
-;pm.status_path = /fpm-status
- 
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: ouput header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string 
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
- 
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
- 
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
- 
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_terminate_timeout = 0
- 
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
- 
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
- 
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever 
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot = 
- 
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-;chdir = /var/www
- 
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-catch_workers_output = yes
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; exectute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5
- 
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-env[PATH] = $PATH
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'. 
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or @prefix@)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+;  - the global prefix if it's been set (-p arguement)
+;  - @prefix@ otherwise
+include=/etc/php/fpm.d/*.conf
--- /dev/null	2007-02-13 18:29:53.000000000 +0200
+++ php-5.3.27/sapi/fpm/php-fpm.conf-d.in	2013-12-05 20:50:54.570727359 +0200
@@ -0,0 +1,392 @@
+; Start a new pool named 'www'.
+; the variable $pool can we used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or @php_fpm_prefix@) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = @php_fpm_user@
+group = @php_fpm_group@
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses on a
+;                            specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = /var/run/php/@processname@.sock
+
+; Set listen(2) backlog. A value of '-1' means unlimited.
+; Default Value: 128 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = -1
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions. 
+; Default Values: user and group are set as the running user
+;                 mode is set to 0660
+;listen.owner = @php_fpm_user@
+;listen.group = @php_fpm_group@
+;listen.mode = 0660
+ 
+; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+listen.allowed_clients = 127.0.0.1
+
+; Specify the nice(2) priority to apply to the pool processes (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool processes will inherit the master process priority
+;         unless it specified otherwise
+; Default Value: no set
+; priority = -19
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives. With this process management, there will be
+;             always at least 1 children.
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+;  ondemand - no children are created at startup. Children will be forked when
+;             new requests will connect. The following parameter are used:
+;             pm.max_children           - the maximum number of children that
+;                                         can be alive at the same time.
+;             pm.process_idle_timeout   - The number of seconds after which
+;                                         an idle process will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI. The below defaults are based on a server without much resources. Don't
+; forget to tweak pm.* to fit your needs.
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
+; Note: This value is mandatory.
+pm.max_children = 5
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+pm.start_servers = 2
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 2
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 5
+
+; The number of seconds after which an idle process will be killed.
+; Note: Used only when pm is set to 'ondemand'
+; Default Value: 10s
+;pm.process_idle_timeout = 10s;
+ 
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. It shows the following informations:
+;   pool                 - the name of the pool;
+;   process manager      - static, dynamic or ondemand;
+;   start time           - the date and time FPM has started;
+;   start since          - number of seconds since FPM has started;
+;   accepted conn        - the number of request accepted by the pool;
+;   listen queue         - the number of request in the queue of pending
+;                          connections (see backlog in listen(2));
+;   max listen queue     - the maximum number of requests in the queue
+;                          of pending connections since FPM has started;
+;   listen queue len     - the size of the socket queue of pending connections;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes;
+;   max active processes - the maximum number of active processes since FPM
+;                          has started;
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic' and 'ondemand');
+; Value are updated in real time.
+; Example output:
+;   pool:                 www
+;   process manager:      static
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          62636
+;   accepted conn:        190460
+;   listen queue:         0
+;   max listen queue:     1
+;   listen queue len:     42
+;   idle processes:       4
+;   active processes:     11
+;   total processes:      15
+;   max active processes: 12
+;   max children reached: 0
+;
+; By default the status page output is formatted as text/plain. Passing either
+; 'html', 'xml' or 'json' in the query string will return the corresponding
+; output syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+;   http://www.foo.bar/status?xml
+;
+; By default the status page only outputs short status. Passing 'full' in the
+; query string will also return status for each pool process.
+; Example: 
+;   http://www.foo.bar/status?full
+;   http://www.foo.bar/status?json&full
+;   http://www.foo.bar/status?html&full
+;   http://www.foo.bar/status?xml&full
+; The Full status returns for each process:
+;   pid                  - the PID of the process;
+;   state                - the state of the process (Idle, Running, ...);
+;   start time           - the date and time the process has started;
+;   start since          - the number of seconds since the process has started;
+;   requests             - the number of requests the process has served;
+;   request duration     - the duration in µs of the requests;
+;   request method       - the request method (GET, POST, ...);
+;   request URI          - the request URI with the query string;
+;   content length       - the content length of the request (only with POST);
+;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
+;   script               - the main script called (or '-' if not set);
+;   last request cpu     - the %cpu the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because CPU calculation is done when the request
+;                          processing has terminated;
+;   last request memory  - the max amount of memory the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because memory calculation is done when the request
+;                          processing has terminated;
+; If the process is in Idle state, then informations are related to the
+; last request the process has served. Otherwise informations are related to
+; the current request being served.
+; Example output:
+;   ************************
+;   pid:                  31330
+;   state:                Running
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          63087
+;   requests:             12808
+;   request duration:     1250261
+;   request method:       GET
+;   request URI:          /test_mem.php?N=10000
+;   content length:       0
+;   user:                 -
+;   script:               /home/fat/web/docs/php/test_mem.php
+;   last request cpu:     0.00
+;   last request memory:  0
+;
+; Note: There is a real-time FPM status monitoring sample web page available
+;       It's available in: @EXPANDED_DATADIR@/fpm/status.html
+;
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set 
+;pm.status_path = /fpm-status
+ 
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The access log file
+; Default: not set
+;access.log = log/$pool.access.log
+
+; The access log format.
+; The following syntax is allowed
+;  %%: the '%' character
+;  %C: %CPU used by the request
+;      it can accept the following format:
+;      - %{user}C for user CPU only
+;      - %{system}C for system CPU only
+;      - %{total}C  for user + system CPU (default)
+;  %d: time taken to serve the request
+;      it can accept the following format:
+;      - %{seconds}d (default)
+;      - %{miliseconds}d
+;      - %{mili}d
+;      - %{microseconds}d
+;      - %{micro}d
+;  %e: an environment variable (same as $_ENV or $_SERVER)
+;      it must be associated with embraces to specify the name of the env
+;      variable. Some exemples:
+;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
+;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
+;  %f: script filename
+;  %l: content-length of the request (for POST request only)
+;  %m: request method
+;  %M: peak of memory allocated by PHP
+;      it can accept the following format:
+;      - %{bytes}M (default)
+;      - %{kilobytes}M
+;      - %{kilo}M
+;      - %{megabytes}M
+;      - %{mega}M
+;  %n: pool name
+;  %o: ouput header
+;      it must be associated with embraces to specify the name of the header:
+;      - %{Content-Type}o
+;      - %{X-Powered-By}o
+;      - %{Transfert-Encoding}o
+;      - ....
+;  %p: PID of the child that serviced the request
+;  %P: PID of the parent of the child that serviced the request
+;  %q: the query string 
+;  %Q: the '?' character if query string exists
+;  %r: the request URI (without the query string, see %q and %Q)
+;  %R: remote IP address
+;  %s: status (response code)
+;  %t: server time the request was received
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;  %T: time the log has been written (the request has finished)
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;  %u: remote user
+;
+; Default: "%R - %u %t \"%m %r\" %s"
+;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
+ 
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = log/$pool.log.slow
+ 
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+ 
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+ 
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+ 
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+ 
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever 
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot = 
+ 
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+ 
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+catch_workers_output = yes
+
+; Limits the extensions of the main script FPM will allow to parse. This can
+; prevent configuration mistakes on the web server side. You should only limit
+; FPM to .php extensions to prevent malicious users to use other extensions to
+; exectute php code.
+; Note: set an empty value to allow all extensions.
+; Default Value: .php
+;security.limit_extensions = .php .php3 .php4 .php5
+ 
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+env[PATH] = $PATH
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'. 
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or @prefix@)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M
--- php-5.3.27/sapi/fpm/config.m4~	2013-12-05 20:55:36.000000000 +0200
+++ php-5.3.27/sapi/fpm/config.m4	2013-12-05 20:56:08.277968372 +0200
@@ -583,7 +583,7 @@
   AC_DEFINE_UNQUOTED(PHP_FPM_USER, "$php_fpm_user", [fpm user name])
   AC_DEFINE_UNQUOTED(PHP_FPM_GROUP, "$php_fpm_group", [fpm group name])
 
-  PHP_OUTPUT(sapi/fpm/php-fpm.conf sapi/fpm/init.d.php-fpm sapi/fpm/php-fpm.service sapi/fpm/php-fpm.8 sapi/fpm/status.html)
+  PHP_OUTPUT(sapi/fpm/php-fpm.conf sapi/fpm/php-fpm.conf-d sapi/fpm/init.d.php-fpm sapi/fpm/php-fpm.service sapi/fpm/php-fpm.8 sapi/fpm/status.html)
   PHP_ADD_MAKEFILE_FRAGMENT([$abs_srcdir/sapi/fpm/Makefile.frag], [$abs_srcdir/sapi/fpm], [sapi/fpm])
 
   SAPI_FPM_PATH=sapi/fpm/php-fpm
--- php-5.3.27/sapi/fpm/Makefile.frag~	2013-12-05 20:55:36.000000000 +0200
+++ php-5.3.27/sapi/fpm/Makefile.frag	2013-12-05 20:57:56.416089690 +0200
@@ -19,9 +19,10 @@
 	@$(INSTALL) -m 0755 $(SAPI_FPM_PATH) $(INSTALL_ROOT)$(sbindir)/$(program_prefix)php-fpm$(program_suffix)$(EXEEXT)
 
 	@echo "Installing PHP FPM config:        $(INSTALL_ROOT)$(sysconfdir)/" && \
-	$(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir) || :
+	$(mkinstalldirs) $(INSTALL_ROOT)$(sysconfdir)/fpm.d || :
 
 	@$(INSTALL_DATA) sapi/fpm/php-fpm.conf $(INSTALL_ROOT)$(sysconfdir)/php-fpm.conf || :
+	@$(INSTALL_DATA) sapi/fpm/php-fpm.conf-d $(INSTALL_ROOT)$(sysconfdir)/fpm.d/www.conf || :
 
 	@echo "Installing PHP FPM man page:      $(INSTALL_ROOT)$(mandir)/man8/"
 	@$(mkinstalldirs) $(INSTALL_ROOT)$(mandir)/man8