up to 3.2.0 (2017-06-27)

[packages/nagios-nrpe.git] / nagios-nrpe-config.patch

diff --git a/nagios-nrpe-config.patch b/nagios-nrpe-config.patch
index 7cd8cd8862c3370a8e8d6cab18c6479159418add..e94813ecb937363dcd83daee5e30b9f364c1d570 100644 (file)
--- a/nagios-nrpe-config.patch
+++ b/nagios-nrpe-config.patch
@@ -1,14 +1,14 @@
---- nrpe-3.0.orig/sample-config/nrpe.cfg.in    2016-07-12 23:24:40.000000000 +0300
-+++ nrpe-3.0/sample-config/nrpe.cfg.in 2016-09-07 15:46:35.913180521 +0300
-@@ -257,47 +257,8 @@
+--- nrpe-3.2.0/sample-config/nrpe.cfg.in~      2017-06-28 00:13:20.000000000 +0300
++++ nrpe-3.2.0/sample-config/nrpe.cfg.in       2017-07-11 12:15:01.541380203 +0300
+@@ -281,80 +281,4 @@
+ # INCLUDE CONFIG DIRECTORY
  # This directive allows you to include definitions from config files (with a
  # .cfg extension) in one or more directories (with recursion).
- 
+-
 -#include_dir=<somedirectory>
 -#include_dir=<someotherdirectory>
-+include_dir=/etc/nagios/nrpe.d
- 
- 
+-
+-
 -
 -# COMMAND DEFINITIONS
 -# Command definitions that this daemon will run.  Definitions
@@ -31,9 +31,10 @@
 -
 -
 -# The following examples use hardcoded command arguments...
+-# This is by far the most secure method of using NRPE
 -
 -command[check_users]=@pluginsdir@/check_users -w 5 -c 10
--command[check_load]=@pluginsdir@/check_load -w 15,10,5 -c 30,25,20
+-command[check_load]=@pluginsdir@/check_load -r -w .15,.10,.05 -c .30,.25,.20
 -command[check_hda1]=@pluginsdir@/check_disk -w 20% -c 10% -p /dev/hda1
 -command[check_zombie_procs]=@pluginsdir@/check_procs -w 5 -c 10 -s Z
 -command[check_total_procs]=@pluginsdir@/check_procs -w 150 -c 200
@@ -45,9 +46,39 @@
 -# config file is set to '1'.  This poses a potential security risk, so
 -# make sure you read the SECURITY file before doing this.
 -
--#command[check_users]=@pluginsdir@/check_users -w $ARG1$ -c $ARG2$
--#command[check_load]=@pluginsdir@/check_load -w $ARG1$ -c $ARG2$
--#command[check_disk]=@pluginsdir@/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
--#command[check_procs]=@pluginsdir@/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
-+# NOTE:
-+# In PLD Linux, command definitions are in file /etc/nagios/nrpe.d/commands.cfg
+-### MISC SYSTEM METRICS ###
+-#command[check_users]=@pluginsdir@/check_users $ARG1$
+-#command[check_load]=@pluginsdir@/check_load $ARG1$
+-#command[check_disk]=@pluginsdir@/check_disk $ARG1$
+-#command[check_swap]=@pluginsdir@/check_swap $ARG1$
+-#command[check_cpu_stats]=@pluginsdir@/check_cpu_stats.sh $ARG1$
+-#command[check_mem]=@pluginsdir@/custom_check_mem -n $ARG1$
+-
+-### GENERIC SERVICES ###
+-#command[check_init_service]=sudo @pluginsdir@/check_init_service $ARG1$
+-#command[check_services]=@pluginsdir@/check_services -p $ARG1$
+-
+-### SYSTEM UPDATES ###
+-#command[check_yum]=@pluginsdir@/check_yum
+-#command[check_apt]=@pluginsdir@/check_apt
+-
+-### PROCESSES ###
+-#command[check_all_procs]=@pluginsdir@/custom_check_procs
+-#command[check_procs]=@pluginsdir@/check_procs $ARG1$
+-
+-### OPEN FILES ###
+-#command[check_open_files]=@pluginsdir@/check_open_files.pl $ARG1$
+-
+-### NETWORK CONNECTIONS ###
+-#command[check_netstat]=@pluginsdir@/check_netstat.pl -p $ARG1$ $ARG2$
+-
+-### ASTERISK ###
+-#command[check_asterisk]=@pluginsdir@/check_asterisk.pl $ARG1$
+-#command[check_sip]=@pluginsdir@/check_sip $ARG1$
+-#command[check_asterisk_sip_peers]=sudo @pluginsdir@/check_asterisk_sip_peers.sh $ARG1$
+-#command[check_asterisk_version]=@pluginsdir@/nagisk.pl -c version
+-#command[check_asterisk_peers]=@pluginsdir@/nagisk.pl -c peers
+-#command[check_asterisk_channels]=@pluginsdir@/nagisk.pl -c channels 
+-#command[check_asterisk_zaptel]=@pluginsdir@/nagisk.pl -c zaptel 
+-#command[check_asterisk_span]=@pluginsdir@/nagisk.pl -c span -s 1
++include_dir=/etc/nagios/nrpe.d