--- mythtv/i18n/mythfrontend_pl.ts.fix 2006-02-04 17:24:02.278434000 +0100
+++ mythtv/i18n/mythfrontend_pl.ts 2006-02-04 17:29:11.508434000 +0100
@@ -0,0 +1,8123 @@
+
+
+ @default
+
+ Unknown
+ Nieznany
+
+
+ Queued
+ Zakolejkowany
+
+
+ Pending
+ Oczekuj±cy
+
+
+ Starting
+ Startuje
+
+
+ Running
+ Uruchomiony
+
+
+ Stopping
+ Zatrzymany
+
+
+ Paused
+ Pauza
+
+
+ Retrying
+
+
+
+ Erroring
+ B³êdy
+
+
+ Aborting
+ Zaniechanie
+
+
+ Done (Invalid status!)
+ Zrobione (Z³y status!)
+
+
+ Finished
+ Ukoñczone
+
+
+ Aborted
+ Zaniechane
+
+
+ Errored
+ B³êdy
+
+
+ Cancelled
+ Anulowane
+
+
+
+ CaptureCardEditor
+
+ Capture Card Menu
+ Menu Kart Przechwytywania
+
+
+ Edit..
+ Edytuj..
+
+
+ Delete..
+ Usuñ..
+
+
+ Are you sure you want to delete ALL capture cards?
+ Jeste¶ pewny ¿e chcesz usun±c wszystkie karty?
+
+
+ Yes, delete capture cards
+ Tak, usuñ karty przechwytywania
+
+
+ No, don't
+ Nie, nie usuwaj
+
+
+ Are you sure you want to delete this capture card?
+ Jeste¶ pewny ¿e chcesz usun± tê kartê?
+
+
+ Yes, delete capture card
+ Tak, usuñ tê kartê
+
+
+ Capture cards
+ Karty Przechwytywania
+
+
+
+ CardInput
+
+ Scan for channels
+
+
+
+ Use channel scanner to find channels for this input.
+
+
+
+ Fetch channels from listings source
+
+
+
+ This uses the listings data source to provide the channels for this input.
+
+
+
+ This can take a long time to run.
+
+
+
+
+ ChannelEditor
+
+ Channels
+ Kana³y
+
+
+ Delete Channels
+ Usuñ Kana³
+
+
+ Delete all channels on currently selected source[s].
+
+
+
+ Are you sure you would like to delete these channels?
+
+
+
+ Yes, delete the channels
+
+
+
+ No, don't
+
+
+
+ Are you sure you would like to delete this channel?
+
+
+
+ Yes, delete the channel
+
+
+
+ Channel Menu
+
+
+
+ Edit..
+ Edytuj..
+
+
+ Delete..
+ Usuñ..
+
+
+
+ ChannelRecPriority
+
+ The theme you are using does not contain a 'recprioritychannels' element. Please contact the theme creator and ask if they could please update it.<br><br>The next screen will be empty. Escape out of it to return to the menu.
+
+
+
+ OK
+
+
+
+
+ CustomRecord
+
+ Edit Rule
+
+
+
+ <New rule>
+
+
+
+ Rule Name
+
+
+
+ Match an exact title
+
+
+
+ Match an exact episode
+
+
+
+ Match words in the title
+
+
+
+ Match in any descriptive field
+
+
+
+ Limit by category
+
+
+
+ All matches for a genre (Data Direct)
+
+
+
+ New episodes only
+
+
+
+ Exclude unidentified episodes
+
+
+
+ Category type
+
+
+
+ or
+
+
+
+ Limit movies by the year of release
+ Limit films by the year of release
+
+
+ Minimum star rating (0.0 to 1.0 for movies only)
+ Minimum star rating (0.0 to 1.0 for films only)
+
+
+ Person named in the credits
+
+
+
+ Only on a specific station
+
+
+
+ Exclude one station
+
+
+
+ Match related callsigns
+
+
+
+ Only on channels marked as favorites
+ Only on channels marked as favourites
+
+
+ Only channels from a specific video source
+
+
+
+ Only channels marked as commercial free
+
+
+
+ Only shows marked as HDTV
+
+
+
+ Anytime on a specific day of the week
+
+
+
+ Only on weekdays (Monday through Friday)
+ Only on weekdays (Monday to Friday)
+
+
+ Only on weekends
+
+
+
+ Only in primetime
+
+
+
+ Not in primetime
+
+
+
+ Multiple sports teams (complete example)
+
+
+
+ Sci-fi B-movies (complete example)
+
+
+
+ SportsCenter Overnight (complete example - use FindDaily)
+
+
+
+ Movie of the Week (complete example - use FindWeekly)
+
+
+
+ First Episodes (complete example for Data Direct)
+
+
+
+ Add this example clause
+
+
+
+ Additional Tables
+
+
+
+ Test
+
+
+
+ Record
+
+
+
+ Cancel
+
+
+
+ An error was found when checking
+
+
+
+ The database error was
+
+
+
+ Limit by MPAA or VCHIP rating (Data Direct)
+
+
+
+
+ DTVSignalMonitor
+
+ Seen
+
+
+
+ Matching
+
+
+
+
+ DVBConfigurationGroup
+
+ DiSEqC
+
+
+
+ Recording Options
+
+
+
+
+ DVBSignalMonitor
+
+ Signal To Noise
+
+
+
+ Bit Error Rate
+
+
+
+ Uncorrected Blocks
+
+
+
+
+ DVBTransportsEditor
+
+ DVB Transport Editor
+
+
+
+ Are you sure you would like to delete this transport?
+
+
+
+ Yes, delete the transport
+
+
+
+ No, don't
+
+
+
+ Transport Menu
+
+
+
+ Edit..
+
+
+
+ Delete..
+
+
+
+
+ DataDirectLineupSelector
+
+ Fetching lineups from DataDirect service...
+
+
+
+ Fetching lineups from the Myth Plus service...
+
+
+
+
+ InfoDialog
+
+ Record this program whenever it's shown anywhere
+ Record this programme whenever it's shown anywhere
+
+
+ Record this program whenever it's shown on this channel
+ Record this programme whenever it's shown on this channel
+
+
+ Record this program in this timeslot every week
+ Record this programme in this timeslot every week
+
+
+ Record this program in this timeslot every day
+ Record this programme in this timeslot every day
+
+
+ Record one showing of this title
+
+
+
+ Record only this showing of the program
+ Record only this showing of the programme
+
+
+ Don't record this program
+ Don't record this programme
+
+
+ Don't record this showing
+
+
+
+ Record this showing with override options
+
+
+
+ Record this showing with normal options
+
+
+
+ To go to the advanced recordings screen, press 'i'
+
+
+
+ To see a list of all up-coming showings of this program, press '5'
+ To see a list of all up-coming showings of this programme, press '5'
+
+
+
+ JobQueue
+
+ Transcode
+
+
+
+ Flag Commercials
+
+
+
+ Unknown Job
+
+
+
+ Undefined
+
+
+
+
+ ManualBox
+
+ Manual Recording
+
+
+
+ Title:
+
+
+
+ Subtitle:
+
+
+
+ Duration:
+
+
+
+ minutes
+
+
+
+ Start
+
+
+
+ Stop
+
+
+
+
+ ManualSchedule
+
+ Manual Recording Scheduler
+
+
+
+ Channel:
+
+
+
+ Date or day of the week
+
+
+
+ Time:
+
+
+
+ Duration:
+
+
+
+ minute
+
+
+
+ minutes
+
+
+
+ Title (optional):
+
+
+
+ Set Recording Options
+
+
+
+ Cancel
+
+
+
+ Manual Record
+
+
+
+
+ MythContext
+
+ Could not connect to the master backend server -- is it running? Is the IP address set for it in the setup program correct?
+
+
+
+ The connection to the master backend server has gone away for some reason.. Is it running?
+
+
+
+
+ MythImageFileDialog
+
+ The theme you are using is missing the 'file_browser_background' element.
+
+Returning to the previous menu.
+
+
+
+ Missing UI Element
+
+
+
+ The theme you are using is missing the 'file_browser' element.
+
+Returning to the previous menu.
+
+
+
+
+ MythPopupBox
+
+ OK
+ OK
+
+
+ Cancel
+ Anuluj
+
+
+
+ MythSearchDialog
+
+ OK
+ OK
+
+
+ Cancel
+ Anuluj
+
+
+
+ MythThemedDialog
+
+ Could not locate '%1' in theme '%2'.
+
+Returning to the previous menu.
+
+
+
+ Missing UI Element
+
+
+
+
+ MythWizard
+
+ &Cancel
+ Anuluj
+
+
+ < &Back
+ Wstecz
+
+
+ &Next >
+ Dalej
+
+
+ &Finish
+ Koniec
+
+
+
+ PlayGroup
+
+ Group
+ Grupa
+
+
+
+ PlayGroupEditor
+
+ Playback Groups
+
+
+
+ Create New Playback Group
+
+
+
+ Delete playback group:
+
+
+
+ Yes, delete group
+
+
+
+ No, Don't delete group
+
+
+
+ Default
+ Domy¶lnie
+
+
+ (Create new group)
+
+
+
+ Enter group name or press SELECT to enter text via the On Screen Keyboard
+
+
+
+
+ PlaybackBox
+
+ All Programs
+ All Programmes
+
+
+ There are %1 recordings in this display group
+
+
+
+ There is one recording in this display group
+
+
+
+ There are no recordings in this display group
+
+
+
+ % used
+
+
+
+ , %1 GB free
+
+
+
+ ^(The |A |An )
+
+
+
+ Recording List Menu
+
+
+
+ Change Group Filter
+
+
+
+ Change Group View
+
+
+
+ Change Group Password
+
+
+
+ Playlist options
+
+
+
+ Add this Group to Playlist
+
+
+
+ Add this recording to Playlist
+
+
+
+ You have finished watching:
+
+
+
+ Are you sure you want to delete:
+
+
+
+ ERROR: Recorded file does not exist.
+
+
+
+ Allow this program to AutoExpire?
+ Allow this programme to AutoExpire?
+
+
+ Are you sure you want to stop:
+
+
+
+ Delete it, but allow it to re-record
+
+
+
+ Yes, and allow re-record
+
+
+
+ Delete it
+
+
+
+ Yes, delete it
+
+
+
+ Yes, AutoExpire
+
+
+
+ Yes, stop recording it
+
+
+
+ Save it so I can watch it again
+
+
+
+ No, keep it, I changed my mind
+
+
+
+ No, do not AutoExpire
+
+
+
+ No, continue recording it
+
+
+
+ There are %1 items in the playlist.
+
+
+
+ There is %1 item in the playlist.
+
+
+
+ Play
+
+
+
+ Shuffle Play
+
+
+
+ Clear Playlist
+
+
+
+ Toggle playlist for this Category/Title
+
+
+
+ Toggle playlist for this Recording Group
+
+
+
+ Toggle playlist for this recording
+
+
+
+ These actions affect all items in the playlist
+
+
+
+ Change Recording Group
+
+
+
+ Change Playback Group
+
+
+
+ Job Options
+
+
+
+ Delete
+
+
+
+ Begin Transcoding
+
+
+
+ Stop Transcoding
+
+
+
+ Begin Commercial Flagging
+
+
+
+ Stop Commercial Flagging
+
+
+
+ Begin
+
+
+
+ Stop
+
+
+
+ Play from bookmark
+
+
+
+ Play from beginning
+
+
+
+ A preserved episode is ignored in calculations for deleting episodes above the limit. Auto-expiration is used to remove eligable programs when disk space is low.
+ A preserved episode is ignored in calculations for deleting episodes above the limit. Auto-expiry is used to remove eligible programmes when disc space is low.
+
+
+ Disable Auto Expire
+
+
+
+ Enable Auto Expire
+
+
+
+ Do not preserve this episode
+
+
+
+ Preserve this episode
+
+
+
+ Edit Recording Schedule
+
+
+
+ Show Program Details
+ Show Programme Details
+
+
+ Change Recording Title
+
+
+
+ User Job
+
+
+
+ Play from...
+
+
+
+ Remove from Playlist
+
+
+
+ Add to Playlist
+
+
+
+ Stop Recording
+
+
+
+ Storage Options
+
+
+
+ Recording Options
+
+
+
+ Status Icons
+
+
+
+ Commercials are flagged
+
+
+
+ An editing cutlist is present
+
+
+
+ The program is able to auto-expire
+ The programme is able to auto-expire
+
+
+ Commercials are being flagged
+
+
+
+ A bookmark is set
+
+
+
+ Recording is in use
+
+
+
+ Ok
+
+
+
+ Group View
+
+
+
+ Show Titles only
+
+
+
+ Show Titles and Categories
+
+
+
+ Show Titles, Categories, and Recording Groups
+
+
+
+ Show Titles and Recording Groups
+
+
+
+ Show Categories only
+
+
+
+ Show Categories and Recording Groups
+
+
+
+ Show Recording Groups only
+
+
+
+ Select Group Filter
+
+
+
+ item
+
+
+
+ items
+
+
+
+ Default
+
+
+
+ LiveTV
+
+
+
+ Groups
+
+
+
+ Categories
+
+
+
+ Password:
+
+
+
+ Recording Group
+
+
+
+ OK
+
+
+
+ Playback Group
+
+
+
+ Recording Title
+
+
+
+ Title
+
+
+
+ Subtitle
+
+
+
+ Group Password
+
+
+
+ Recording Group:
+
+
+
+ Old Password:
+
+
+
+ New Password:
+
+
+
+
+ PreviousList
+
+ Previously Recorded
+
+
+
+ Select Sort Order
+
+
+
+ Sort by Time
+
+
+
+ Reverse Time
+
+
+
+ Sort by Title
+
+
+
+ Reverse Title
+
+
+
+ NOTE: removing items from this list will not delete any recordings.
+
+
+
+ Remove this episode from the list
+
+
+
+ Remove all episodes for this title
+
+
+
+ OK
+
+
+
+ Allow this episode to re-record
+
+
+
+ Never record this episode
+
+
+
+
+ ProgDetails
+
+ OK
+
+
+
+
+ ProgFinder
+
+ No Programs
+ No Programmes
+
+
+ There are no available programs under this search. Please select another search.
+ There are no available programmes under this search. Please select another search.
+
+
+ !! No Programs !!
+ !! No Programmes !!
+
+
+
+ ProgLister
+
+ Program Listings
+ Programme Listings
+
+
+ New Title Search
+
+
+
+ Title Search
+
+
+
+ Keyword Search
+
+
+
+ People Search
+
+
+
+ Power Search
+
+
+
+ Category Search
+
+
+
+ Channel Search
+
+
+
+ Movie Search
+ Film Search
+
+
+ Time Search
+
+
+
+ Unknown Search
+
+
+
+ Select Rating
+
+
+
+ Select Channel
+
+
+
+ Select Category
+
+
+
+ Select List
+
+
+
+ Select
+
+
+
+ Select Phrase
+
+
+
+ <New Phrase>
+
+
+
+ OK
+
+
+
+ Delete
+
+
+
+ Record
+
+
+
+ Select Search
+
+
+
+ <New Search>
+
+
+
+ Edit
+
+
+
+ Select Time
+
+
+
+ Edit Power Search Fields
+
+
+
+ Optional title phrase:
+
+
+
+ Optional subtitle phrase:
+
+
+
+ Optional description phrase:
+
+
+
+ (Any Program Type)
+ (Any Programme Type)
+
+
+ Movies
+ Films
+
+
+ Series
+
+
+
+ Show
+
+
+
+ Sports
+
+
+
+ (Any Category)
+
+
+
+ (Any Station)
+
+
+
+ All
+
+
+
+ Premieres
+
+
+
+ Specials
+
+
+
+ 4 stars
+
+
+
+ At least 3 1/2 stars
+
+
+
+ At least 3 stars
+
+
+
+ At least 2 stars
+
+
+
+ Power Recording Rule
+
+
+
+
+ ProgramRecPriority
+
+ The theme you are using does not contain a 'recpriorityprograms' element. Please contact the theme creator and ask if they could please update it.<br><br>The next screen will be empty. Escape out of it to return to the menu.
+
+
+
+ OK
+
+
+
+ ^(The |A |An )
+
+
+
+ Recording %1 of %2
+
+
+
+ Recording just this showing
+
+
+
+ Recording with override options
+
+
+
+ Recording every week
+
+
+
+ Recording in this timeslot
+
+
+
+ Recording on this channel
+
+
+
+ Recording all showings
+
+
+
+ Recording one showing
+
+
+
+ Recording a showing daily
+
+
+
+ Recording a showing weekly
+
+
+
+ Not allowed to record this showing
+
+
+
+ Not recording this showing
+
+
+
+ Error!
+
+
+
+ Any
+
+
+
+
+ QObject
+
+ Use custom identifier for frontend preferences
+
+
+
+ Wake-On-LAN settings
+
+
+
+ Database Configuration
+
+
+
+ All database settings take effect when you restart this program.
+
+
+
+ Myth could not connect to the database. Please verify your database settings below.
+
+
+
+ Host name
+
+
+
+ The host name or IP address of the machine hosting the database. This information is required.
+
+
+
+ Database
+
+
+
+ The name of the database. This information is required.
+
+
+
+ User
+
+
+
+ The user name to use while connecting to the database. This information is required.
+
+
+
+ Password
+
+
+
+ The password to use while connecting to the database. This information is required.
+
+
+
+ Database type
+
+
+
+ MySQL
+
+
+
+ The database implementation used for your server.
+
+
+
+ If this frontend's host name changes often, check this box and provide a network-unique name to identify it. If unchecked, the frontend machine's local host name will be used to save preferences in the database.
+
+
+
+ Custom identifier
+
+
+
+ An identifier to use while saving the settings for this frontend.
+
+
+
+ Use Wake-On-LAN to wake database
+
+
+
+ If checked, the frontend will use Wake-On-LAN parameters to reconnect to the database server.
+
+
+
+ Reconnect time
+
+
+
+ The time in seconds to wait for the server to wake up.
+
+
+
+ Retry attempts
+
+
+
+ The number of retries to wake the server before the frontend gives up.
+
+
+
+ Wake command
+
+
+
+ The command executed on this frontend to wake up the database server.
+
+
+
+ Select your preferred language
+
+
+
+ Go Back
+
+
+
+ No Change
+
+
+
+ Pre-scaling theme images
+
+
+
+ Default
+
+
+
+ Any
+
+
+
+ Bad Menu File
+
+
+
+ No Menu File
+
+
+
+ Channel Options
+
+
+
+ (New Channel)
+
+
+
+ Channel Name
+
+
+
+ Channel Number
+
+
+
+ Video Source
+
+
+
+ (All)
+
+
+
+ (Unassigned)
+
+
+
+ Sort Mode
+
+
+
+ Hide channels without channel number.
+
+
+
+ Channel Scanner
+
+
+
+ Starts the channel scanner.
+
+
+
+ Transport Editor
+
+
+
+ Allows you to edit the transports directly
+
+
+
+ This is rarely required unless you are using a satelite dish and must enter an initial frequency to for the channel scanner to try.
+
+
+
+ [Not Selected]
+
+
+
+ Callsign
+
+
+
+ TV Format
+
+
+
+ If this channel uses a format other than TV Format in the General Backend Setup screen, set it here.
+
+
+
+ Rank
+
+
+
+ Number of bonus points to be added to any recording on this channel during scheduling.
+
+
+
+ Use a positive number as the rank if you want this to be a preferred channel, a negative one to deprecate this channel.
+
+
+
+ Icon
+
+
+
+ Image file to use as the icon for this channel on various MythTV displays.
+
+
+
+ Video filters
+
+
+
+ Filters to be used when recording from this channel. Not used with hardware encoding cards.
+
+
+
+ Playback filters
+
+
+
+ Filters to be used when recordings from this channel are viewed. Start with a plus to append to the global playback filters.
+
+
+
+ XMLTV ID
+
+
+
+ ID used by listing services to get an exact correspondance between a channel in your line-up and a channel in their database. Normally this is set automatically when 'mythfilldatabase' is run.
+
+
+
+ Commercial Free
+
+
+
+ If set automatic commercial flagging will be skipped for this channel. Useful for premium channels like HBO.
+ If set automatic commercial flagging will be skipped for this channel. Useful for non-commercial channels such as BBC.
+
+
+ Visible
+
+
+
+ If set, the channel will be visible in the EPG.
+
+
+
+ Use on air guide
+
+
+
+ If set the guide information will be taken from the On Air Channel guide.
+
+
+
+ Frequency
+
+
+
+ or
+
+
+
+ Channel
+
+
+
+ Finetune
+
+
+
+ Contrast
+
+
+
+ Brightness
+
+
+
+ Color
+ Colour
+
+
+ Hue
+
+
+
+ Channel Options - Common
+
+
+
+ Channel Options - Video 4 Linux
+
+
+
+ This section lists each transport that MythTV currently knows about. The display fields are Frequency, SymbolRate, NetworkID, and TransportID
+
+
+
+ Standard
+
+
+
+ Digital TV standard.
+
+
+
+
+ DVB
+
+
+
+ ATSC
+
+
+
+ Frequency (Option has no default)
+The frequency for this channel in Hz.
+
+
+
+ Symbol Rate
+
+
+
+ Symbol Rate (Option has no default)
+
+
+
+ Polarity
+
+
+
+ Polarity (Option has no default)
+
+
+
+ Horizontal
+
+
+
+ Vertical
+
+
+
+ Right Circular
+
+
+
+ Left Circular
+
+
+
+ Modulation
+
+
+
+ Modulation Used
+
+
+
+ 8VSB
+
+
+
+ QAM64
+
+
+
+ QAM256
+
+
+
+ Inversion
+
+
+
+ Inversion (Default: Auto):
+Most cards can autodetect this now, so leave it at Auto unless it won't work.
+
+
+
+ Auto
+
+
+
+ On
+
+
+
+ Off
+
+
+
+ Bandwidth
+
+
+
+ Bandwidth (Default: Auto)
+
+
+
+ 6 MHz
+
+
+
+ 7 MHz
+
+
+
+ 8 MHz
+
+
+
+ Modulation (Default: Auto)
+
+
+
+ Constellation
+
+
+
+ Constellation (Default: Auto)
+
+
+
+ None
+
+
+
+ FEC
+
+
+
+ Forward Error Correction (Default: Auto)
+
+
+
+ LP Coderate
+
+
+
+ Low Priority Code Rate (Default: Auto)
+
+
+
+ HP Coderate
+
+
+
+ High Priority Code Rate (Default: Auto)
+
+
+
+ Guard Interval
+
+
+
+ Guard Interval (Default: Auto)
+
+
+
+ Trans. Mode
+
+
+
+ Transmission Mode (Default: Auto)
+
+
+
+ Hierarchy
+
+
+
+ Hierarchy (Default: Auto)
+
+
+
+ DVB Transport
+
+
+
+ Transport Options
+
+
+
+ Failed to Reinit Video.
+
+
+
+ Return to menu.
+
+
+
+ Unable to create AudioOutput.
+
+
+
+ TXT off
+
+
+
+ CC off
+
+
+
+ CC
+
+
+
+ TXT
+
+
+
+ CC/TXT enabled
+
+
+
+ Continue WITHOUT AUDIO!
+
+
+
+ And, never ask again.
+
+
+
+ And, don't ask again in this session.
+
+
+
+ Unable to initialize video.
+
+
+
+ Error was encountered while displaying video.
+
+
+
+ Return to Menu
+
+
+
+ Position Saved
+
+
+
+ Position Cleared
+
+
+
+ cut point
+
+
+
+ keyframe
+
+
+
+ 1 frame
+
+
+
+ 0.5 seconds
+
+
+
+ 1 second
+
+
+
+ 5 seconds
+
+
+
+ 20 seconds
+
+
+
+ 1 minute
+
+
+
+ 5 minutes
+
+
+
+ 10 minutes
+
+
+
+ error
+
+
+
+ cut
+
+
+
+ You are close to an existing cut point. Would you like to:
+
+
+
+ Delete this cut point
+
+
+
+ Move this cut point to the current position
+
+
+
+ Flip directions - delete to the
+
+
+
+ right
+
+
+
+ left
+
+
+
+ Cancel
+
+
+
+ Insert a new cut point?
+
+
+
+ Delete before this frame
+
+
+
+ Delete after this frame
+
+
+
+ %1 of %2
+
+
+
+ Skip %1
+
+
+
+ Commercial: %1
+
+
+
+ Not Flagged
+
+
+
+ Skipping Back.
+
+
+
+ Start of program.
+ Start of programme.
+
+
+ At End, can not Skip.
+
+
+
+ Title match (regex)
+
+
+
+ Automatically set new recording rules to use this group if the title matches this regular expression. For example, "(News|CNN)" would match any title in which "News" or "CNN" appears.
+
+
+
+ default
+
+
+
+ Skip ahead (seconds)
+
+
+
+ How many seconds to skip forward on a fast forward.
+
+
+
+ Skip back (seconds)
+
+
+
+ How many seconds to skip backward on a rewind.
+
+
+
+ Time stretch (speed x 100)
+
+
+
+ Initial playback speed with adjusted audio. Use 100 for normal speed, 50 for half speed and 200 for double speed.
+
+
+
+ ProfileGroup
+
+
+
+ Transcoders
+
+
+
+ New Profile Group Name
+
+
+
+ (Create new profile group)
+
+
+
+ Delete profile group:
+
+
+
+ Yes, delete group
+
+
+
+ No, Don't delete group
+
+
+
+ Profile Group Name
+
+
+
+ Hostname
+
+
+
+ Card-Type
+
+
+
+ GB
+ GigaBytes
+
+
+
+ minutes
+
+
+
+ Re-Record
+
+
+
+ Repeat
+
+
+
+ stars
+
+
+
+ star
+
+
+
+ Unknown
+
+
+
+ Playing
+
+
+
+ Recording
+
+
+
+ Commercial Flagging
+
+
+
+ Transcoding
+
+
+
+ PIP
+
+
+
+ S
+ RecTypeChar kSingleRecord
+
+
+
+ T
+ RecTypeChar kTimeslotRecord
+
+
+
+ W
+ RecTypeChar kWeekslotRecord
+
+
+
+ C
+ RecTypeChar kChannelRecord
+
+
+
+ A
+ RecTypeChar kAllRecord
+
+
+
+ F
+ RecTypeChar kFindOneRecord
+
+
+
+ d
+ RecTypeChar kFindDailyRecord
+
+
+
+ w
+ RecTypeChar kFindWeeklyRecord
+
+
+
+ O
+ RecTypeChar kOverrideRecord/kDontRecord
+
+
+
+ Single Record
+
+
+
+ Record Daily
+
+
+
+ Record Weekly
+
+
+
+ Channel Record
+
+
+
+ Record All
+
+
+
+ Find One
+
+
+
+ Find Daily
+
+
+
+ Find Weekly
+
+
+
+ Override Recording
+
+
+
+ Not Recording
+
+
+
+ A
+ RecStatusChar rsAborted
+
+
+
+ R
+ RecStatusChar rsRecorded
+
+
+
+ X
+ RecStatusChar rsDontRecord
+
+
+
+ P
+ RecStatusChar rsPreviousRecording
+
+
+
+ R
+ RecStatusChar rsCurrentRecording
+
+
+
+ E
+ RecStatusChar rsEarlierShowing
+
+
+
+ T
+ RecStatusChar rsTooManyRecordings
+
+
+
+ c
+ RecStatusChar rsCancelled
+
+
+
+ M
+ RecStatusChar rsMissed
+
+
+
+ C
+ RecStatusChar rsConflict
+
+
+
+ L
+ RecStatusChar rsLaterShowing
+
+
+
+ r
+ RecStatusChar rsRepeat
+
+
+
+ x
+ RecStatusChar rsInactive
+
+
+
+ K
+ RecStatusChar rsLowDiskSpace
+
+
+
+ B
+ RecStatusChar rsTunerBusy
+
+
+
+ N
+ RecStatusChar rsNotListed
+
+
+
+ V
+ RecStatusChar rsNeverRecord
+
+
+
+ Aborted
+
+
+
+ Recorded
+
+
+
+ Will Record
+
+
+
+ Don't Record
+
+
+
+ Previously Recorded
+
+
+
+ Currently Recorded
+
+
+
+ Earlier Showing
+
+
+
+ Max Recordings
+
+
+
+ Manual Cancel
+
+
+
+ Missed
+
+
+
+ Conflicting
+
+
+
+ Later Showing
+
+
+
+ Inactive
+
+
+
+ Low Disk Space
+ Low Disc Space
+
+
+ Tuner Busy
+
+
+
+ Not Listed
+
+
+
+ Never Record
+
+
+
+ This showing will be recorded.
+
+
+
+ This showing is being recorded.
+
+
+
+ This showing was recorded.
+
+
+
+ This showing was recorded but was aborted before recording was completed.
+
+
+
+ This showing was not recorded because it was scheduled after it would have ended.
+
+
+
+ This showing was not recorded because it was manually cancelled.
+
+
+
+ there wasn't enough disk space available.
+ there wasn't enough disc space available.
+
+
+ the tuner card was already being used.
+
+
+
+ The status of this showing is unknown.
+
+
+
+ This showing will not be recorded because
+
+
+
+ This showing was not recorded because
+
+
+
+ it was manually set to not record.
+
+
+
+ this episode was previously recorded according to the duplicate policy chosen for this title.
+
+
+
+ this episode was previously recorded and is still available in the list of recordings.
+
+
+
+ this episode will be recorded at an earlier time instead.
+
+
+
+ too many recordings of this program have already been recorded.
+ too many recordings of this programme have already been recorded.
+
+
+ another program with a higher priority will be recorded.
+ another programme with a higher priority will be recorded.
+
+
+ this episode will be recorded at a later time.
+
+
+
+ this episode is a repeat.
+
+
+
+ this recording schedule is inactive.
+
+
+
+ this show does not match the current program listings.
+ this show does not match the current programme listings.
+
+
+ it was marked to never be recorded.
+
+
+
+ you should never see this.
+
+
+
+ Title
+
+
+
+ Unidentified Episode
+
+
+
+ Part %1 of %2,
+
+
+
+ HDTV
+
+
+
+ CC
+ Close Captioned
+
+
+
+ Subtitled
+
+
+
+ Stereo
+
+
+
+ Description
+
+
+
+ Category
+
+
+
+ Type
+ category_type
+
+
+
+ Episode Number
+
+
+
+ Original Airdate
+
+
+
+ Program ID
+ Programme ID
+
+
+ Actors
+
+
+
+ Director
+
+
+
+ Producer
+
+
+
+ Executive Producer
+
+
+
+ Writer
+
+
+
+ Guest Star
+
+
+
+ Host
+
+
+
+ Adapter
+
+
+
+ Presenter
+
+
+
+ Commentator
+
+
+
+ Guest
+
+
+
+ Status
+
+
+
+ Find ID
+
+
+
+ Profile
+
+
+
+ Recording Host
+
+
+
+ Recording Group
+
+
+
+ Playback Group
+
+
+
+ OK
+
+
+
+ Reactivate
+
+
+
+ Stop recording
+
+
+
+ Don't record
+
+
+
+ Never record
+
+
+
+ Change Ending Time
+
+
+
+ Edit Options
+
+
+
+ Add Override
+
+
+
+ Edit Override
+
+
+
+ Clear Override
+
+
+
+ The following programs will be recorded instead:
+
+ The following programmes will be recorded instead:
+
+
+
+ Record anyway
+
+
+
+ Forget Previous
+
+
+
+ Absolutely don't record
+
+
+
+ Codec
+
+
+
+ MP3 Quality
+
+
+
+ The higher the slider number, the lower the quality of the audio. Better quality audio (lower numbers) requires more CPU.
+
+
+
+ Volume (%)
+
+
+
+ Recording volume of the capture card
+
+
+
+ Sampling rate
+
+
+
+ Sets the audio sampling rate for your DSP. Ensure that you choose a sampling rate appropriate for your device. btaudio may only allow 32000.
+
+
+
+ Type
+
+
+
+ Sets the audio type
+
+
+
+ Bitrate
+
+
+
+ Sets the audio bitrate
+
+
+
+ Volume of the recording
+
+
+
+ Bitrate Settings
+
+
+
+ Audio Quality
+
+
+
+ RTjpeg Quality
+
+
+
+ Higher is better quality.
+
+
+
+ Luma filter
+
+
+
+ Lower is better.
+
+
+
+ Chroma filter
+
+
+
+ Bitrate in kilobits/second. 2200Kbps is approximately 1 Gigabyte per hour.
+
+
+
+ Scale bitrate for frame size
+
+
+
+ If set, the MPEG4 bitrate will be used for 640x480. If other resolutions are used, the bitrate will be scaled appropriately.
+
+
+
+ Minimum quality
+
+
+
+ Modifying the default may have severe consequences.
+
+
+
+ Maximum quality
+
+
+
+ Max quality difference between frames
+
+
+
+ Enable interlaced DCT encoding
+
+
+
+ If set, the MPEG4 encoder will use interlaced DCT encoding. You probably want this when encoding interlaced video.
+
+
+
+ Enable interlaced motion estimation
+
+
+
+ If set, the MPEG4 encoder will use interlaced motion estimation. You probably want this when encoding interlaced video.
+
+
+
+ Enable high-quality encoding
+
+
+
+ If set, the MPEG4 encoder will use 'high-quality' encoding options. This requires much more processing, but can result in better video.
+
+
+
+ Enable 4MV encoding
+
+
+
+ If set, the MPEG4 encoder will use '4MV' motion-vector encoding. This requires much more processing, but can result in better video. It is highly recommended that the HQ option is enabled if 4MV is enabled.
+
+
+
+ Number of threads
+
+
+
+ Threads to use for software encoding.
+
+
+
+ Set to a value less than or equal to the number of processors on the backend that will be doing the encoding.
+
+
+
+ Max. Bitrate
+
+
+
+ Maximum Bitrate in kilobits/second. 2200Kbps is approximately 1 Gigabyte per hour.
+
+
+
+ Stream Type
+
+
+
+ Sets the type of stream generated by your PVR.
+
+
+
+ Aspect Ratio
+
+
+
+ Square
+
+
+
+ Sets the aspect ratio of stream generated by your PVR.
+
+
+
+ Quality
+
+
+
+ Horizontal Decimation
+
+
+
+ Vertical Decimation
+
+
+
+ Video Compression
+
+
+
+ RTjpeg Parameters
+
+
+
+ MPEG-4 Parameters
+
+
+
+ MPEG-2 Parameters
+
+
+
+ Hardware MJPEG Parameters
+
+
+
+ MPEG-2 Hardware Encoder
+
+
+
+ Enable auto-transcode after recording
+
+
+
+ Automatically transcode when a recording is made using this profile and the recording's schedule is configurd to allow transcoding.
+ Automatically transcode when a recording is made using this profile and the recording's schedule is configured to allow transcoding.
+
+
+ Resize Video while transcoding
+
+
+
+ Width
+
+
+
+ Height
+
+
+
+ Image size
+
+
+
+ Autodetect
+
+
+
+ Autodetect from %1
+
+
+
+ Record using the "%1" profile
+
+
+
+ Transcode using Autodetect
+
+
+
+ Transcode using "%1"
+
+
+
+ Profile name
+
+
+
+ Scanning
+
+
+
+ ATSC Channel %1
+
+
+
+ Failed to probe the card
+
+
+
+ Failed to open the card
+
+
+
+ Australia
+
+
+
+ Finland
+
+
+
+ Sweden
+
+
+
+ United Kingdom
+
+
+
+ Germany
+
+
+
+ Transport
+
+
+
+ Ignore Signal Timeout
+
+
+
+ This option allows you to slow down the scan for broken drivers, such as the DVB drivers for the Leadtek LR6650 DVB card.
+
+
+
+ Capture Card
+
+
+
+ File location
+
+
+
+ Location of the channels.conf file.
+
+
+
+ Scan Type
+
+
+
+ Broadcast
+
+
+
+ Cable
+
+
+
+ Cable HRC
+
+
+
+ Frequency Table
+
+
+
+ Frequency table to use.
+
+
+
+ The option of scanning only at channel 78 and above is provided because most digital channels are in that range.
+
+
+
+ Terrestrial
+
+
+
+ ATSC Modulation
+
+
+
+ ATSC modulation, 8-VSB, QAM-256, etc.
+
+
+
+ Most cable systems in the United States use QAM-256 or QAM-64, but some mixed systems may use 8-VSB for over-the-air channels.
+
+
+
+ (5_1) Underscore
+
+
+
+ (5-1) Minus
+
+
+
+ (5.1) Period
+ (5.1) Dot
+
+
+ (501) Zero
+
+
+
+ (51) None
+
+
+
+ Channel Separator
+
+
+
+ What to use to separate ATSC major and minor channels.
+
+
+
+ Minimal Updates
+
+
+
+ Rename to Match
+
+
+
+ Delete
+
+
+
+ Existing Channel Treatment
+
+
+
+ How to treat existing channels.
+
+
+
+ Bandwidth (Default: Auto)
+
+
+
+
+ Power Search
+
+
+
+ Title Search
+
+
+
+ Keyword Search
+
+
+
+ People Search
+
+
+
+ Unknown Search
+
+
+
+ Signal Lock
+
+
+
+ Signal Power
+
+
+
+ Scheduling Options
+
+
+
+ Post Recording Processing
+
+
+
+ Storage Options
+
+
+
+ Schedule Information
+
+
+
+ Program details
+ Programme details
+
+
+ List previous episodes
+
+
+
+ List upcoming episodes
+
+
+
+ Create New Recording Group
+
+
+
+ Store in the "%1" recording group
+
+
+
+ Use "%1" playback group settings
+
+
+
+ Select Recording Schedule
+
+
+
+ Do not record this program
+ Do not record this programme
+
+
+ Record only this showing
+
+
+
+ Record one showing of this title
+
+
+
+ Record in this timeslot every week
+
+
+
+ Record one showing of this title every week
+
+
+
+ Record in this timeslot every day
+
+
+
+ Record one showing of this title every day
+
+
+
+ Record at any time on this channel
+
+
+
+ Record at any time on any channel
+
+
+
+ Record this showing with normal options
+
+
+
+ Record this showing with override options
+
+
+
+ Do not allow this showing to be recorded
+
+
+
+ Start recording %1 minutes late
+
+
+
+ Start recording %1 minute late
+
+
+
+ Start recording on time
+
+
+
+ Start recording %1 minute early
+
+
+
+ Start recording %1 minutes early
+
+
+
+ End recording %1 minutes early
+
+
+
+ End recording %1 minute early
+
+
+
+ End recording on time
+
+
+
+ End recording %1 minute late
+
+
+
+ End recording %1 minutes late
+
+
+
+ Record new episodes only
+
+
+
+ Look for duplicates in current and previous recordings
+
+
+
+ Look for duplicates in current recordings only
+
+
+
+ Look for duplicates in previous recordings only
+
+
+
+ [ Match duplicates with ]
+
+
+
+ Match duplicates using subtitle & description
+
+
+
+ Match duplicates using subtitle
+
+
+
+ Match duplicates using description
+
+
+
+ Don't match duplicates
+
+
+
+ [ Select recording Profile ]
+
+
+
+ Transcode new recordings
+
+
+
+ Do not Transcode new recordings
+
+
+
+ [ Select transcoder ]
+
+
+
+ Commercial Flag new recordings
+
+
+
+ Do not Commercial Flag new recordings
+
+
+
+ Run '%1'
+
+
+
+ Do not run '%1' for new recordings
+
+
+
+ Allow auto expire
+
+
+
+ Don't allow auto expire
+
+
+
+ This recording schedule is inactive
+
+
+
+ This recording schedule is active
+
+
+
+ Delete oldest if this would exceed the max episodes
+
+
+
+ Don't record if this would exceed the max episodes
+
+
+
+ No episode limit
+
+
+
+ Keep only one episode.
+
+
+
+ Keep at most %1 episodes
+
+
+
+ Reduce priority by %1
+
+
+
+ Normal recording priority
+
+
+
+ Raise priority by %1
+
+
+
+ Select Recording Group
+
+
+
+ Create a new recording group
+
+
+
+ Select Playback Group
+
+
+
+ Preview schedule changes
+
+
+
+ Save these settings
+
+
+
+ 30m
+
+
+
+ 1h
+
+
+
+ 1h30m
+
+
+
+ 2h
+
+
+
+ MythTV wants to record "%1" on %2 in %3 seconds. Do you want to:
+
+
+
+ Channel Change Error
+
+
+
+ Could not query inputs.
+
+
+
+ ERROR, Compile with V4L support to query inputs
+
+
+
+ XMLTV listings grabber
+
+
+
+ Channel frequency table
+
+
+
+ Use default unless this source uses a different frequency table than the system wide table defined in the General settings.
+
+
+
+ Perform EIT Scan
+
+
+
+ If this is enabled the data in this source will be updated with listing data provided by the channels themselves 'over-the-air'.
+
+
+
+ User ID
+
+
+
+ Configuration will run in the terminal window
+
+
+
+ Please wait while MythTV retrieves the list of available channels.
+You might want to check the output as it
+runs by switching to the terminal from which you started
+this program.
+
+
+
+ Failed to retrieve channel information.
+
+
+
+ MythTV was unable to retrieve channel information for your provider.
+Please check the terminal window for more information
+
+
+
+ Warning.
+
+
+
+ You MUST run 'mythfilldatabase --manual the first time,
+ instead of just 'mythfilldatabase'.
+Your grabber does not provide channel numbers, so you have to set them manually.
+
+
+
+ Use only the transmitted guide data.
+
+
+
+ This will usually only work with ATSC or DVB channels,
+
+
+
+ and generally provides data only for the next few days.
+
+
+
+ Video source setup
+
+
+
+ Video device
+
+
+
+ VBI device
+
+
+
+ Audio device
+
+
+
+ (None)
+
+
+
+ Signal Timeout (msec)
+
+
+
+ Maximum time MythTV waits for any signal when scanning for channels.
+
+
+
+ Tuning Timeout (msec)
+
+
+
+ Maximum time MythTV waits for a channel lock when scanning for channels. Or, for issuing a warning in LiveTV mode.
+
+
+
+ Audio sampling rate limit
+
+
+
+ Do not adjust volume
+
+
+
+ Check this option for budget BT878 based DVB-T cards such as the AverTV DVB-T that require the audio volume left alone.
+
+
+
+ DVB Card Number
+
+
+
+ When you change this setting, the text below should change to the name and type of your card. If the card cannot be opened, an error message will be displayed.
+
+
+
+ Subtype
+
+
+
+ Frontend ID
+
+
+
+ Using hardware MPEG decoder
+
+
+
+ This reduces the complexity of the stream that MythTV records so that it can be fed directly to a hardware MPEG decoder.
+
+
+
+ Specifically, MythTV will record only one audio and one subtitle stream.
+
+
+
+ You will want to also set preferred languages in the frontend's Utilities/Setup:Setup:TV Settings:General(page 3).
+
+
+
+ Store recordings in TS format.
+
+
+
+ Use Transport Stream format as the storage format as opposed to using the deprecated Program Stream conversion. The conversion loses data, and forces MythTV to disable some tuning safety checks.
+
+
+
+ Wait for SEQ start header.
+
+
+
+ Normally the dvb-recording will drop packets from the card until a sequence start header is seen. This option turns off this feature.
+
+
+
+ Open DVB card on demand
+
+
+
+ This option makes the backend dvb-recorder only open the card when it is actually in-use leaving it free for other programs at other times.
+
+
+
+ DiSEqC Input Type: (DVB-S)
+
+
+
+ Select the input type for DVB-S cards. Leave as Single LNB/Input for DVB-C or DVB-T. The inputs are mapped from Input Connections option on the main menu
+
+
+
+ Cable box model
+
+
+
+ Other
+
+
+
+ Firewire Model is for future use in case there is a need to model specific workarounds.
+
+
+
+ Connection Type
+ Typ Po³±czenia
+
+
+ Point to Point
+ Punkt-Punkt
+
+
+ IEEE-1394 Port
+ Port IEEE-1394
+
+
+ Firewire port on your firewire card.
+
+
+
+ Node
+
+
+
+ Firewire node is the remote device.
+
+
+
+ Speed
+
+
+
+ 100Mbps
+
+
+
+ 200Mbps
+
+
+
+ 400Mbps
+
+
+
+ Default Input
+
+
+
+ Only MPEG2TS is supported at this time.
+
+
+
+ DBOX2 Streaming Port
+
+
+
+ DBOX2 streaming port on your DBOX2.
+
+
+
+ DBOX2 HTTP Port
+
+
+
+ DBOX2 http port on your DBOX2.
+
+
+
+ DBOX2 Host IP
+
+
+
+ DBOX2 Host IP is the remote device.
+
+
+
+ Capture Card Setup
+
+
+
+ Card type
+
+
+
+ Change the cardtype to the appropriate type for the capture card you are configuring.
+
+
+
+ Analog V4L capture card
+ Analogue V4L capture card
+
+
+ MJPEG capture card (Matrox G200, DC10)
+
+
+
+ MPEG-2 encoder card (PVR-x50, PVR-500)
+
+
+
+ DVB DTV capture card (v3.x)
+
+
+
+ pcHDTV DTV capture card (w/V4L drivers)
+
+
+
+ FireWire cable box
+
+
+
+ USB MPEG-4 encoder box (Plextor ConvertX, etc)
+
+
+
+ DBox2 TCP/IP cable box
+
+
+
+ Capture device
+
+
+
+ Video source
+
+
+
+ Input
+
+
+
+ LNB LOF Switch
+
+
+
+ This defines at what frequency (in Hz) the LNB will do a switch from high to low setting, and vice versa.
+
+
+
+ LNB LOF High
+
+
+
+ This defines the offset (in Hz) the frequency coming from the lnb will be in high setting.
+
+
+
+ LNB LOF Low
+
+
+
+ This defines the offset (in Hz) the frequency coming from the lnb will be in low setting.
+
+
+
+ DiSEqC Satellite Location
+
+
+
+ The longitude of the satellite you are aiming at. For western hemisphere use a negative value. Value is in decimal.
+
+
+
+ Free to air channels only.
+
+
+
+ If set, only free to air channels will be used.
+
+
+
+ External channel change command
+
+
+
+ If specified, this command will be run to change the channel for inputs which have an external tuner device such as a cable box. The first argument will be the channel number.
+
+
+
+ Preset tuner to channel
+
+
+
+ Leave this blank unless you have an external tuner that is connected to the tuner input of your card. If so, you will need to specify the preset channel for the signal (normally 3 or 4).
+
+
+
+ Input preference
+
+
+
+ If the input preference is not equal for all inputs, the scheduler may choose to record a show at a later time so that it can record on an input with a higher value.
+
+
+
+ Select the LNB Settings for DVB-S cards.
+
+
+
+ For DVB-C and DVB-T you don't need to set these values.
+
+
+
+ Connect source to input
+
+
+
+ (New capture card)
+
+
+
+ (Delete all capture cards)
+
+
+
+ (New video source)
+
+
+
+ (Delete all video sources)
+
+
+
+ Could not open '%1' to probe its inputs.
+
+
+
+ ERROR, Compile with DVB support to query inputs
+
+
+
+ Recorder Options
+
+
+
+ The Cartesian latitude for your location.
+
+
+
+ Use negative numbers for southern and western coordinates.
+
+
+
+ The Cartesian longitude for your location.
+
+
+
+ DiSEqC Options
+
+
+
+ Data Direct Lineup
+
+
+
+ Retrieve Lineups
+
+
+
+ Video source name
+
+
+
+ Default input
+
+
+
+ Input connections
+
+
+
+ Starting channel
+
+
+
+ Starting LiveTV channel.
+
+
+
+ This is updated on every successful channel change.
+
+
+
+ The following programs will be recorded instead:
+ The following programmes will be recorded instead:
+
+
+ Audio output device
+
+
+
+ Use internal volume controls
+
+
+
+ MythTV can control the PCM and master mixer volume. If you prefer to use an external mixer program, then disable this option.
+
+
+
+ Mixer Device
+
+
+
+ Mixer Controls
+
+
+
+ Changing the volume adjusts the selected mixer.
+
+
+
+ Master Mixer Volume
+
+
+
+ Initial volume for the Master Mixer. This affects all sound created by the sound card. Note: Do not set this too low.
+
+
+
+ PCM Mixer Volume
+
+
+
+ Initial volume for PCM output. Using the volume keys in MythTV will adjust this parameter.
+
+
+
+ Independent Muting of Left and Right Audio Channels
+
+
+
+ Enable muting of just the left or right channel. Useful if your broadcaster puts the original language on one channel, and a dubbed version of the program on the other one. This modifies the behavior of the Mute key.
+ Enable muting of just the left or right channel. Useful if your broadcaster puts the original language on one channel, and a dubbed version of the programme on the other one. This modifies the behavior of the Mute key.
+
+
+ Enable AC3 to SPDIF passthrough
+
+
+
+ Enable sending AC3 audio directly to your sound card's SPDIF output, on sources which contain AC3 soundtracks (usually digital TV). Requires that the audio output device be set to something suitable.
+
+
+
+ Deinterlace playback
+
+
+
+ Make the video look normal on a progressive display (i.e. monitor).
+
+
+
+ Algorithm
+
+
+
+ Linear blend
+
+
+
+ Kernel (less motion blur)
+
+
+
+ Bob (2x framerate)
+
+
+
+ One field
+
+
+
+ Deinterlace algorithm.
+
+
+
+ 'Kernel' requires SSE CPU support.
+
+
+
+ 'Bob' requires XVideo or XvMC video out.
+
+
+
+ Deinterlace settings
+
+
+
+ Custom Filters
+
+
+
+ Advanced Filter configuration, format:
+[[<filter>=<options>,]...]
+
+
+
+ Extra audio buffering
+
+
+
+ Enable this setting if MythTV is playing "crackly" audio and you are using hardware encoding. This setting will have no effect on MPEG-4 or RTJPEG video. MythTV will keep extra audio data in its internal buffers to workaround this bug.
+
+
+
+ PIP Video Location
+
+
+
+ Top Left
+
+
+
+ Bottom Left
+
+
+
+ Top Right
+
+
+
+ Bottom Right
+
+
+
+ Location of PIP Video window.
+
+
+
+ Password required to view all recordings
+
+
+
+ If given, a password must be entered to view the complete list of all recordings.
+
+
+
+ Default group filter to apply
+
+
+
+ All Programs
+ All Programmes
+
+
+ Default group filter to apply on the View Recordings screen.
+
+
+
+ Always prompt for initial group filter
+
+
+
+ Always prompt the user for the initial filter to apply when entering the Watch Recordings screen.
+
+
+
+ Save current group filter when changed
+
+
+
+ Remember the last selected filter instead of displaying the default filter whenever you enter the playback screen.
+
+
+
+ Default View
+
+
+
+ Show Titles only
+
+
+
+ Show Titles and Categories
+
+
+
+ Show Titles, Categories, and Recording Groups
+
+
+
+ Show Titles and Recording Groups
+
+
+
+ Show Categories only
+
+
+
+ Show Categories and Recording Groups
+
+
+
+ Show Recording Groups only
+
+
+
+ Select what type of grouping to show on the Watch Recordings screen by default.
+
+
+
+ Show filter name instead of "All Programs"
+ Show filter name instead of "All Programmes"
+
+
+ Use the name of the display filter currently applied in place of the term "All Programs" in the playback screen.
+ Use the name of the display filter currently applied in place of the term "All Programmes" in the playback screen.
+
+
+ Show 'LiveTV' recordings when using "All Programs" filter
+ Show 'LiveTV' recordings when using "All Programmes" filter
+
+
+ If this setting is disabled, LiveTV recordings will only be visible via the special "LiveTV"Recording Group.
+
+
+
+ Start in Title section
+
+
+
+ If enabled, the selector highlight will start on the Program titles window, otherwise the selector will default to the recordings.
+ If enabled, the selector highlight will start on the Programme titles window, otherwise the selector will default to the recordings.
+
+
+ Show group summary
+
+
+
+ While selecting a group, show a group summary instead of showing info about the first episode in that group.
+
+
+
+ Jump amount (in minutes)
+
+
+
+ How many minutes to jump forward or backward when the jump keys are pressed.
+
+
+
+ Smart Fast Forwarding
+
+
+
+ If enabled, then immediately after rewinding, only skip forward the same amount as skipping backwards.
+
+
+
+ Seek to exact frame
+
+
+
+ If enabled, seeking is frame exact, but slower.
+
+
+
+ Commercial Skip Method
+
+
+
+ Blank Frame Detection (default)
+
+
+
+ Blank Frame + Scene Change Detection
+
+
+
+ Scene Change Detection
+
+
+
+ Logo Detection
+
+
+
+ All
+
+
+
+ This determines the method used by MythTV to detect when commercials start and end. You must have 'Automatically Flag Commercials' enabled to use anything other than 'Blank Frame'.
+
+
+
+ Automatically Skip Commercials
+
+
+
+ Notify, but do not skip
+
+
+
+ Automatically Skip
+
+
+
+ Automatically skip commercial breaks that have been flagged during Automatic Commercial Flagging or by the mythcommflag program, or just notify that a commercial has been detected.
+
+
+
+ Commercial Flag New Recordings
+
+
+
+ This is the default value used for the Auto-Commercial Flagging setting when a new scheduled recording is created.
+
+
+
+ Default Auto Transcode setting
+
+
+
+ This is the default value used for the Auto-Transcode setting when a new scheduled recording is created.
+
+
+
+ Default Transcoder
+
+
+
+ This is the default value used for the transcoder setting when a new scheduled recording is created.
+
+
+
+ Run User Job #%1 On New Recordings
+
+
+
+ This is the default value used for the 'Run User Job #%1' setting when a new scheduled recording is created.
+
+
+
+ Strict Commercial Detection
+
+
+
+ Enable stricter Commercial Detection code. Disable if some commercials are not being detected.
+
+
+
+ Skip blank frames after commercials
+
+
+
+ When using Blank Frame Detection and Auto-Flagging, include blank frames following commercial breaks as part of the commercial break.
+
+
+
+ Commercial Skip Auto-Rewind Amount
+
+
+
+ If set, MythTV will automatically rewind this many seconds after performing a commercial skip.
+
+
+
+ Commercial Skip Notify Amount
+
+
+
+ If set, MythTV will act like a commercial begins this many seconds early. This can be useful when commercial notification is used in place of automatic skipping.
+
+
+
+ Extra Disk Space (in Gigabytes)
+ Extra Disc Space (in Gigabytes)
+
+
+ Extra disk space you want on the recording file system beyond what MythTV requires. This is useful if you use the recording file system for data other than MythTV recordings.
+ Extra disc space you want on the recording file system beyond what MythTV requires. This is useful if you use the recording file system for data other than MythTV recordings.
+
+
+ Auto Expire Method
+
+
+
+ Oldest Show First
+
+
+
+ Lowest Priority First
+
+
+
+ Method used to determine which recorded shows to delete first. LiveTV recordings will always expire before normal recordings.
+
+
+
+ Auto Expire Default
+
+
+
+ When enabled, any newly recorded programs will be marked as eligible for Auto-Expiration. Existing recordings will keep their current value.
+ When enabled, any newly recorded programmes will be marked as eligible for Auto-Expiry. Existing recordings will keep their current value.
+
+
+ LiveTV recordings Max Age
+
+
+
+ AutoExpire will force expiration of LiveTV recordings when they are this many days old. LiveTV recordings may also be expired early if necessary to free up disk space.
+ AutoExpire will force expiry of LiveTV recordings when they are this many days old. LiveTV recordings may also be expired early if necessary to free up disc space.
+
+
+ New Recording Free Disk Space Threshold (in Megabytes)
+ New Recording Free Disc Space Threshold (in Megabytes)
+
+
+ MythTV will stop scheduling new recordings on a backend when its free disk space falls below this value.
+ MythTV will stop scheduling new recordings on a backend when its free disc space falls below this value.
+
+
+ Time to record before start of show (in seconds)
+
+
+
+ This global setting allows the recorder to start before the scheduled start time. It does not affect the scheduler. It is ignored when two shows have been scheduled without enough time in between.
+
+
+
+ Time to record past end of show (in seconds)
+
+
+
+ This global setting allows the recorder to record beyond the scheduled end time. It does not affect the scheduler. It is ignored when two shows have been scheduled without enough time in between.
+
+
+
+ Category of shows to be extended
+
+
+
+ category name
+
+
+
+ For a specific category (e.g. "Sports event"), request that shows be autoextended. Only works if a show's category can be determined.
+
+
+
+ Record past end of show (in minutes)
+
+
+
+ For the specified category, an attempt will be made to extend the recording by the specified time. It is ignored when two shows have been scheduled without enough time in between.
+
+
+
+ Category record over-time
+
+
+
+ List Newest Recording First
+
+
+
+ When enabled, the most recent recording will be listed first in the 'Watch Recordings' screen, otherwise the oldest recording will be listed first.
+
+
+
+ Sort Episodes
+
+
+
+ Record date
+
+
+
+ Original Air date
+
+
+
+ Selects how to sort a shows episodes
+
+
+
+ Sticky keys
+
+
+
+ If enabled, fast forward and rewind continue after the key is released. Pressing the key again increases the fast forward or rewind speed. The alternate fast forward and rewind keys always behave in this way.
+
+
+
+ Fast forward/rewind reposition amount
+
+
+
+ When exiting sticky keys fast forward/rewind mode, reposition this many 1/100th seconds before resuming normal playback. This compensates for the reaction time between seeing where to resume playback and actually exiting seeking.
+
+
+
+ Reverse direction in fast forward/rewind
+
+
+
+ If enabled, pressing the sticky rewind key in fast forward mode switches to rewind mode, and vice versa. If disabled, it will decrease the current speed or switch to play mode if the speed can't be decreased further.
+
+
+
+ General OSD time-out (sec)
+
+
+
+ How many seconds an on-screen display will be active after it is first activated.
+
+
+
+ Program Info OSD time-out
+ Programme Info OSD time-out
+
+
+ How many seconds the on-screen display will display the program information after it is first displayed.
+ How many seconds the on-screen display will display the programme information after it is first displayed.
+
+
+ UDP Notify OSD time-out
+
+
+
+ How many seconds an on-screen display will be active for UDP Notify events.
+
+
+
+ Menu theme
+
+
+
+ OSD theme
+
+
+
+ OSD font
+
+
+
+ CC font
+
+
+
+ Closed Caption font
+
+
+
+ Font size
+
+
+
+ small
+
+
+
+ big
+
+
+
+ default: TV, small: monitor, big:
+
+
+
+ Channel ordering
+
+
+
+ channel number (numeric)
+
+
+
+ channel number (alpha)
+
+
+
+ database order
+
+
+
+ channel name
+
+
+
+ ATSC channel
+
+
+
+ Vertical over/underscan percentage
+
+
+
+ Adjust this if the image does not fill your screen vertically.
+
+
+
+ Horizontal over/underscan percentage
+
+
+
+ Adjust this if the image does not fill your screen horizontally.
+
+
+
+ Scan displacement (X)
+
+
+
+ Adjust this to move the image horizontally.
+
+
+
+ Scan displacement (Y)
+
+
+
+ Adjust this to move the image vertically.
+
+
+
+ Preferred MPEG2 Decoder
+
+
+
+ libmpeg2
+
+
+
+ Standard XvMC
+
+
+
+ VIA XvMC
+
+
+
+ Decoder to use to play back MPEG2 video.
+
+
+
+ Standard will use ffmpeg library.
+
+
+
+ libmpeg2 will use mpeg2 library; this is faster on some AMD processors.
+
+
+
+ Standard XvMC will use XvMC API 1.0 to play back video; this is fast, but does not work well with HDTV sized frames.
+
+
+
+ VIA XvMC will use the VIA VLD XvMC extension.
+
+
+
+ Use video as timebase
+
+
+
+ Use the video as the timebase and warp the audio to keep it in sync. (Experimental)
+
+
+
+ Black background for Closed Captioning
+
+
+
+ If enabled, captions will be displayed over a black space for maximum contrast. Otherwise, captions will use outlined text over the picture.
+
+
+
+ Always display Closed Captioning
+
+
+
+ If enabled, captions will be displayed when playing back recordings or watching live TV. Closed Captioning can be turned on or off by pressing "T" during playback.
+
+
+
+ Always use Browse mode when changing channels in LiveTV
+
+
+
+ If enabled, Browse mode will automatically be activated whenever you use Channel UP/DOWN while watching Live TV.
+
+
+
+ Aggressive Sound card Buffering
+
+
+
+ If enabled, MythTV will pretend to have a smaller sound card buffer than is really present. This may speed up seeking, but can also cause playback problems.
+
+
+
+ Clear Saved Position on playback
+
+
+
+ Automatically clear saved position on a recording when the recording is played back. If disabled, you can mark the beginning with rewind then save position.
+
+
+
+ Alternate Clear Saved Position
+
+
+
+ During playback the Select key (Enter or Space) will alternate between "Position Saved" and "Position Cleared". If disabled, the Select key will save the current position for each keypress.
+
+
+
+ Use Xv picture controls
+
+
+
+ If enabled, Xv picture controls (brightness, contrast, etc.) are used during playback. These are independent of the Video4Linux controls used for recording. The Xv controls may not work properly on some systems.
+
+
+
+ Enable warning about missing audio output
+
+
+
+ If enabled, MythTV will warn you whenever you try to watch a something and MythTV can't access the soundcard.
+
+
+
+ UDP Notify Port
+
+
+
+ During playback, MythTV will listen for connections from the "mythtvosd" or "mythudprelay" programs on this port. See the README in contrib/mythnotify/ for additional information.
+
+
+
+ Action on playback exit
+
+
+
+ Just exit
+
+
+
+ Save position and exit
+
+
+
+ Always prompt
+
+
+
+ If set to prompt, a menu will be displayed when you exit playback mode. The options available will allow you to save your position, delete the recording, or continue watching.
+
+
+
+ Prompt at end of recording
+
+
+
+ If set, a menu will be displayed allowing you to delete the recording when it has finished playing.
+
+
+
+ Generate thumbnail preview images of recordings
+
+
+
+ If enabled, a static image of the recording will be displayed on the "Watch a Recording" menu.
+
+
+
+ Time offset for thumbnail preview images
+
+
+
+ MythTV will use this offset to make a thumbnail image this many seconds from the beginning of the recording, unless this offset happens to be between cutpoints or inside a flagged advertisement.
+
+
+
+ Generate preview image from a bookmark if possible
+
+
+
+ If enabled, MythTV will ignore the above time offset, and use the bookmark inside the recording as the offset for creating a thumbnail image. As with the above, MythTV will honour cutlists and increase this offset if necessary.
+
+
+
+ Display live preview of recordings
+
+
+
+ When enabled, a preview of the recording will play in a small window on the "Watch a Recording" menu.
+
+
+
+ CPU friendly preview of recordings
+
+
+
+ When enabled, recording previews will play with reduced FPS to save CPU.
+
+
+
+ Use Transparent Boxes
+
+
+
+ If enabled, the Watch Recording and Delete Recording screens will use transparency. Disable if selecting the recordings is slow due to high CPU usage.
+
+
+
+ Popup Background Shading Method
+
+
+
+ Fill
+
+
+
+ Image
+
+
+
+ "Fill" is the quickest shading method. "Image" is somewhat slow, but has a higher visual quality. No shading will be the fastest.
+
+
+
+ Use line edit virtual keyboards
+
+
+
+ Allows you to use a virtual keyboard in Myth line edit boxes. To use, hit OK/Select while a line edit is in focus.
+
+
+
+ System Exit key
+
+
+
+ ESC
+
+
+
+ No exit key
+
+
+
+ Control-ESC
+
+
+
+ Meta-ESC
+
+
+
+ Alt-ESC
+
+
+
+ MythTV is designed to run continuously. If you wish, you may use the ESC key or the ESC key + a modifier to exit MythTV. Do not choose a key combination that will be intercepted by your window manager.
+
+
+
+ Confirm Exit
+
+
+
+ When enabled, MythTV will prompt for confirmation when you press the System Exit key.
+
+
+
+ Halt command
+
+
+
+ If you have configured an exit key using the System Shutdown option, you will be given the opportunity to exit MythTV or halt the system completely. Another possibility for this field is "poweroff"
+
+
+
+ Keypress Application
+
+
+
+ External application or script to run when a keypress is received by LIRC.
+
+
+
+ Use Arrow Key Accelerators
+
+
+
+ If enabled, Arrow key accelerators will be used, with LEFT performing an exit action and RIGHT selecting the current item.
+
+
+
+ Setup Pin Code
+
+
+
+ This PIN is used to control access to the setup menus. If you want to use this feature, then setting the value to all numbers will make your life much easier. Set it to blank to disable.
+
+
+
+ Require Setup PIN
+
+
+
+ If set, you will not be able to return to this screen and reset the Setup PIN without first entering the current PIN.
+
+
+
+ Xinerama screen
+
+
+
+ Run on the specified screen or spanning all screens.
+
+
+
+ Monitor Aspect Ratio
+
+
+
+ 4:3
+
+
+
+ 16:9
+
+
+
+ 16:10
+
+
+
+ The aspect ratio of a Xinerama display can not be queried from the display, so you must specify it.
+
+
+
+ Aspect Override
+
+
+
+ 4/3
+
+
+
+ 16/9
+
+
+
+ 4/3 Zoom
+
+
+
+ 16/9 Zoom
+
+
+
+ 16/9 Stretch
+
+
+
+ This will override any aspect ratio in the recorded stream, the same as pressing the W Key during playback. Fill will "fill" the screen with the image clipping as required. Fill is useful when using 4:3 interlaced TV's for display.
+
+
+
+ GUI width (px)
+
+
+
+ The width of the GUI. Do not make the GUI wider than your actual screen resolution. Set to 0 to automatically scale to fullscreen.
+
+
+
+ GUI height (px)
+
+
+
+ The height of the GUI. Do not make the GUI taller than your actual screen resolution. Set to 0 to automatically scale to fullscreen.
+
+
+
+ GUI X offset
+
+
+
+ The horizontal offset the GUI will be displayed at. May only work if run in a window.
+
+
+
+ GUI Y offset
+
+
+
+ The vertical offset the GUI will be displayed at.
+
+
+
+ Display Size - Width
+
+
+
+ Horizontal size of the monitor or TV, is used to calculate the actual aspect ratio of the display. This will override the DisplaySize from the system.
+
+
+
+ Display Size - Height
+
+
+
+ Vertical size of the monitor or TV, is used to calculate the actual aspect ratio of the display. This will override the DisplaySize from the system.
+
+
+
+ Use GUI size for TV playback
+
+
+
+ If enabled, use the above size for TV, otherwise use full screen.
+
+
+
+ Separate video modes for GUI and TV playback
+
+
+
+ Switch X Window video modes for TV. Requires "xrandr" support.
+
+
+
+ In X
+
+
+
+ Horizontal resolution of video which needs a special output resolution.
+
+
+
+ In Y
+
+
+
+ Vertical resolution of video which needs a special output resolution.
+
+
+
+ GUI
+
+
+
+ Resolution of screen when not watching a video.
+
+
+
+ Default screen resolution when watching a video.
+
+
+
+ Screen resolution when watching a video at a specific resolution.
+
+
+
+ Video Output
+
+
+
+ Output
+
+
+
+ Default refresh rate when watching a video.
+
+
+
+ Refresh rate when watching a video at a specific resolution.
+
+
+
+ Rate
+
+
+
+ Aspect ratio when watching a video.
+
+
+
+ Aspect ration when watching a video at a specific resolution.
+
+
+
+ Aspect
+
+
+
+ Leave at "Default" to use ratio reported by the monitor. Set to 16:9 or 4:3 to force a specific aspect ratio.
+
+
+
+ Video Mode Settings
+
+
+
+ Hide Mouse Cursor in Myth
+
+
+
+ Toggles mouse cursor visibility. Most of the Myth GUI does not respond to mouse clicks, this is only to avoid "losing" your mouse cursor.
+
+
+
+ Run the frontend in a window
+
+
+
+ Toggles between windowed and borderless operation.
+
+
+
+ Use a random theme
+
+
+
+ Use a random theme each time MythTV is started.
+
+
+
+ Date format
+
+
+
+ Your preferred date format.
+
+
+
+ Short Date format
+
+
+
+ Your preferred short date format.
+
+
+
+ Time format
+
+
+
+ Your preferred time format. Choose a format with "AP" in it for an AM/PM display, otherwise your time display will be 24-hour or "military" time.
+ Your preferred time format. Choose a format with "AP" in it for an AM/PM display, otherwise your time display will use the 24-hour clock.
+
+
+ Theme
+
+
+
+ Problem reading theme preview image
+
+
+
+ Qt Style
+
+
+
+ At startup, MythTV will change the Qt widget style to this setting. If "Desktop Style" is selected, MythTV will use the existing desktop setting.
+
+
+
+ Desktop Style
+
+
+
+ Channel format
+
+
+
+ number
+
+
+
+ number callsign
+
+
+
+ number name
+
+
+
+ callsign
+
+
+
+ name
+
+
+
+ Your preferred channel format.
+
+
+
+ Long Channel format
+
+
+
+ Your preferred long channel format.
+
+
+
+ Time limit for ATSC signal lock (msec)
+
+
+
+ MythTV can check the signal strength when you tune into a HDTV or other over-the-air digital station. This value is the number of milliseconds to allow before MythTV gives up trying to get an acceptable signal.
+
+
+
+ ATSC Signal Threshold (%)
+
+
+
+ Threshold for a signal to be considered acceptable. If you set this too low MythTV may crash, and if you set it too high you may not be able to tune a channel on which reception would be acceptable.
+
+
+
+ HD Ringbuffer size (KB)
+
+
+
+ The HD device ringbuffer allows the backend to weather moments of stress. The larger the ringbuffer, the longer the moments of stress can be. However, setting the size too large can cause swapping, which is detrimental.
+
+
+
+ Change channels immediately without select
+
+
+
+ When a complete channel number is entered MythTV will switch to that channel immediately without requiring you to hit the select button.
+
+
+
+ Avoid conflicts between live TV and scheduled shows.
+
+
+
+ If enabled, live TV will choose a tuner card that is less likely to have scheduled recordings rather than the best card available.
+
+
+
+ "Big" font
+
+
+
+ Default size is 25.
+
+
+
+ "Medium" font
+
+
+
+ Default size is 16.
+
+
+
+ "Small" font
+
+
+
+ Default size is 12.
+
+
+
+ Floating Program Guide Selector
+ Floating Programme Guide Selector
+
+
+ If enabled, the program guide's selector will be free to move throughout the guide, otherwise it will stay in the center of the guide at all times.
+ If enabled, the programme guide's selector will be free to move throughout the guide, otherwise it will stay in the centre of the guide at all times.
+
+
+ Guide Shading Method
+
+
+
+ Alpha - Transparent (CPU Usage - High)
+
+
+
+ Blender - Transparent (CPU Usage - Middle)
+
+
+
+ Eco - Transparent (CPU Usage - Low)
+
+
+
+ Solid (CPU Usage - Middle)
+
+
+
+ Display Genre Colors
+ Display Genre Colours
+
+
+ Colorize program guide using genre colors. (Not available for all grabbers.)
+ Colourise programme guide using genre colours. (Not available for all grabbers.)
+
+
+ Display Genre Text
+
+
+
+ (Not available for all grabbers.)
+
+
+
+ Display the channel icon
+
+
+
+ Only display 'favorite' channels
+ Only display 'favourite' channels
+
+
+ If enabled, the EPG will initially display only the channels marked as favorites. Pressing "4" will toggle between displaying favorites and all channels.
+ If enabled, the EPG will initially display only the channels marked as favourites. Pressing "4" will toggle between displaying favourites and all channels.
+
+
+ Channels to Display
+
+
+
+ Time Blocks (30 mins) to Display
+
+
+
+ Allow channel jumping in guide
+
+
+
+ If enabled, you will be able to press numbers and jump the selection to whatever channel you enter.
+
+
+
+ Reschedule Higher Priorities
+
+
+
+ Move higher priority programs to other cards and showings when resolving conflicts. This can be used to record lower priority programs that would otherwise not be recorded, but risks missing a higher priority program if the schedule changes.
+ Move higher priority programmes to other cards and showings when resolving conflicts. This can be used to record lower priority programmes that would otherwise not be recorded, but risks missing a higher priority programme if the schedule changes.
+
+
+ Single Recordings Priority
+
+
+
+ Single Recordings will receive this additional recording priority value.
+
+
+
+ Weekslot Recordings Priority
+
+
+
+ Weekslot Recordings will receive this additional recording priority value.
+
+
+
+ Timeslot Recordings Priority
+
+
+
+ Timeslot Recordings will receive this additional recording priority value.
+
+
+
+ Channel Recordings Priority
+
+
+
+ Channel Recordings will receive this additional recording priority value.
+
+
+
+ All Recordings Priority
+
+
+
+ All Recording types will receive this additional recording priority value.
+
+
+
+ Find One Recordings Priority
+
+
+
+ Find One, Find Weekly and Find Daily recording types will receive this additional recording priority value.
+
+
+
+ Override Recordings Priority
+
+
+
+ Override Recordings will receive this additional recording priority value.
+
+
+
+ Guide starts at channel
+
+
+
+ The program guide starts on this channel if it is run from outside of LiveTV mode.
+ The programme guide starts on this channel if it is run from outside LiveTV mode.
+
+
+ What to call 'unknown' programs
+ What to call 'unknown' programmes
+
+
+ What category to give 'unknown' programs
+ What category to give 'unknown' programmes
+
+
+ Use select to change the channel in the program guide
+ Use select to change the channel in the programme guide
+
+
+ If enabled, the Select key will change the channel while using the program guide during live TV. If disabled, the select key will bring up the recording options screen.
+ If enabled, the Select key will change the channel while using the programme guide during live TV. If disabled, the select key will bring up the recording options screen.
+
+
+ Record Threshold
+
+
+
+ If the option to use Select to change the channel is on, pressing Select on a show that is at least this many minutes into the future will schedule a recording.
+
+
+
+ Audio
+
+
+
+ Language
+
+
+
+ Your preferred language for the user interface.
+
+
+
+ Guide Language #%1
+
+
+
+ Your #%1 preferred language for Program Guide Data and captions.
+ Your #%1 preferred language for Programme Guide Data and captions.
+
+
+ Enable Xbox Hardware
+
+
+
+ This enables support for Xbox specific hardware. Requires a frontend restart for changes to take effect.
+
+
+
+ Enable realtime priority threads
+
+
+
+ When running mythfrontend with root privileges, some threads can be given enhanced priority. Disable this if mythfrontend freezes during video playback.
+
+
+
+ Xbox Linux Distribution
+
+
+
+ The program used to control the LED on the Xbox is dependant on which distribution is installed. "led" will be used on GentooX, "blink" on other Xbox distributions.
+
+
+
+ Default LED color
+ Default LED colour
+
+
+ Green
+
+
+
+ Orange
+
+
+
+ Red
+
+
+
+ Sets the LED color when it is not being used for status indication.
+ Sets the LED colour when it is not being used for status indication.
+
+
+ Recording LED mode
+
+
+
+ Sets the LED color when a backend is recording.
+ Sets the LED colour when a backend is recording.
+
+
+ Recording Check Frequency
+
+
+
+ This specifies how frequently (in seconds) to check if a recording is in progress in order to update the Xbox LED.
+
+
+
+ Monitor CD/DVD
+
+
+
+ This enables support for monitoring your CD/DVD drives for new disks and launching the proper plugin to handle them.
+ This enables support for monitoring your CD/DVD drives for new discs and launching the proper plugin to handle them.
+
+
+ Use the PVR-350's TV out / MPEG decoder
+
+
+
+ MythTV can use the PVR-350's TV out and MPEG decoder for high quality playback. This requires that the ivtv-fb kernel module is also loaded and configured properly.
+
+
+
+ Video device for the PVR-350 MPEG decoder
+
+
+
+ Program Guide Alpha
+ Programme Guide Alpha
+
+
+ How much to blend the program guide over the live TV image. Higher numbers mean more guide and less TV.
+ How much to blend the programme guide over the live TV image. Higher numbers mean more guide and less TV.
+
+
+ TV audio through PVR-350 only
+
+
+
+ Normally, PVR-350 audio is looped into a sound card; here you can indicate when that is not the case. MythTV cannot control TV volume when this option is checked.
+
+
+
+ Enable OpenGL vertical sync for timing
+
+
+
+ If it is supported by your hardware/drivers, MythTV will use OpenGL vertical syncing for video timing, reducing frame jitter.
+
+
+
+ Hardware Decoding Settings
+
+
+
+ Log MythTV events to database
+
+
+
+ If enabled, MythTV modules will send event details to the database, where they can be viewed with MythLog or periodically emailed to the administrator.
+
+
+
+ Maximum Number of Entries per Module
+
+
+
+ If there are more than this number of entries for a module, the oldest log entries will be deleted to reduce the count to this number. Set to 0 to disable.
+
+
+
+ Automatic Log Cleaning Enabled
+
+
+
+ This enables the periodic cleanup of the events stored in the Myth database (see "Log MythTV events to database" on the previous page).
+
+
+
+ Log Cleanup Frequency (Days)
+
+
+
+ The number of days between log cleanup runs.
+
+
+
+ Number of days to keep acknowledged log entries
+
+
+
+ The number of days before a log entry that has been acknowledged will be deleted by the log cleanup process.
+
+
+
+ Number of days to keep unacknowledged log entries
+
+
+
+ The number of days before a log entry that has NOT been acknowledged will be deleted by the log cleanup process.
+
+
+
+ Log Print Threshold
+
+
+
+ All Messages
+
+
+
+ Debug and Higher
+
+
+
+ Info and Higher
+
+
+
+ Notice and Higher
+
+
+
+ Warning and Higher
+
+
+
+ Error and Higher
+
+
+
+ Critical and Higher
+
+
+
+ Alert and Higher
+
+
+
+ Emergency Only
+
+
+
+ Disable Printed Output
+
+
+
+ This controls what messages will be printed out as well as being logged to the database.
+
+
+
+ Automatically run mythfilldatabase
+
+
+
+ This enables the automatic execution of mythfilldatabase.
+
+
+
+ mythfilldatabase Run Frequency (Days)
+
+
+
+ The number of days between mythfilldatabase runs.
+
+
+
+ mythfilldatabase Execution Start
+
+
+
+ This setting and the following one define a time period when the mythfilldatabase process is allowed to run. For example, setting Start to 11 and End to 13 would mean that the process would only run between 11 AM and 1 PM.
+
+
+
+ mythfilldatabase Execution End
+
+
+
+ This setting and the preceding one define a time period when the mythfilldatabase process is allowed to run. For example, setting Start to 11 and End to 13 would mean that the process would only run between 11 AM and 1 PM.
+
+
+
+ mythfilldatabase Path
+
+
+
+ Path (including executable) of the mythfilldatabase program.
+
+
+
+ mythfilldatabase Arguments
+
+
+
+ Any arguments you want passed to the mythfilldatabase program.
+
+
+
+ mythfilldatabase Log Path
+
+
+
+ Path to use for logging output from the mythfilldatabase program. Leave blank to disable logging.
+
+
+
+ Myth Database Logging
+
+
+
+ Mythfilldatabase
+
+
+
+ Display Time
+
+
+
+ Display current time on idle LCD display.
+
+
+
+ Display Recording Status
+
+
+
+ Display current recordings information on LCD display.
+
+
+
+ Display Menus
+
+
+
+ Display selected menu on LCD display.
+
+
+
+ Menu Pop-up Time
+
+
+
+ The time (in seconds) that the menu will remain visible after navigation.
+
+
+
+ Display Music Artist and Title
+
+
+
+ Display playing artist and song title in MythMusic on LCD display.
+
+
+
+ Items
+
+
+
+ Artist - Title
+
+
+
+ Artist [Album] Title
+
+
+
+ Which items to show when playing music.
+
+
+
+ Display Channel Information
+
+
+
+ Display tuned channel information on LCD display.
+
+
+
+ Display Volume Information
+
+
+
+ Display volume level information on LCD display.
+
+
+
+ Display Generic Information
+
+
+
+ Display generic information on LCD display.
+
+
+
+ Backlight Always On
+
+
+
+ Turn on the backlight permanently on the LCD display.
+
+
+
+ HeartBeat Always On
+
+
+
+ Turn on the LCD heartbeat.
+
+
+
+ LCD Key order
+
+
+
+ Enter the 6 Keypad Return Codes for your LCD keypad in the order in which you want the functions up/down/left/right/yes/no to operate. (See lcdproc/server/drivers/hd44780.c/keyMapMatrix[] or the matrix for your display)
+
+
+
+ Enable LCD device
+
+
+
+ Use an LCD display to view MythTV status information.
+
+
+
+ LCD device display
+
+
+
+ Enable gamma correction for video
+
+
+
+ If checked, QuickTime will correct the gamma of the video to match your monitor. Turning this off can save some CPU cycles.
+
+
+
+ Use Altivec-enhanced color space conversion
+ Use Altivec-enhanced colour space conversion
+
+
+ If checked, YUV 4:2:0 will be converted to UYVY 4:2:2 in an Altivec-enabled routine. If unchecked, QuickTime will handle the conversion instead.
+
+
+
+ Scale video as necessary
+
+
+
+ If checked, video will be scaled to fit your window or screen. If unchecked, video will never be made larger than its actual pixel size.
+
+
+
+ Frames to skip in fullscreen mode
+
+
+
+ Video displayed in fullscreen or non-windowed mode will skip this many frames for each frame drawn. Set to 0 to show every frame. Only valid when either "Use GUI size for TV playback" or "Run the frontend in a window" is not checked.
+
+
+
+ Video in main window
+
+
+
+ If checked, video will be displayed in the main GUI window. Disable this when you only want video on the desktop or in a floating window. Only valid when "Use GUI size for TV playback" and "Run the frontend in a window" are checked.
+
+
+
+ Frames to skip
+
+
+
+ Video in the main window will skip this many frames for each frame drawn. Set to 0 to show every frame.
+
+
+
+ Opacity
+
+
+
+ The opacity of the main window. Set to 100 for completely opaque, set to 0 for completely transparent.
+
+
+
+ Video in floating window
+
+
+
+ If checked, video will be displayed in a floating window. Only valid when "Use GUI size for TV playback" and "Run the frontend in a window" are checked.
+
+
+
+ Video in the floating window will skip this many frames for each frame drawn. Set to 0 to show every frame.
+
+
+
+ The opacity of the floating window. Set to 100 for completely opaque, set to 0 for completely transparent.
+
+
+
+ Video in the dock
+
+
+
+ If checked, video will be displayed in the application's dock icon. Only valid when "Use GUI size for TV playback" and "Run the frontend in a window" are checked.
+
+
+
+ Video in the dock icon will skip this many frames for each frame drawn. Set to 0 to show every frame.
+
+
+
+ Video on the desktop
+
+
+
+ If checked, video will be displayed on the desktop, behind the Finder icons. Only valid when "Use GUI size for TV playback" and "Run the frontend in a window" are checked.
+
+
+
+ Video on the desktop will skip this many frames for each frame drawn. Set to 0 to show every frame.
+
+
+
+ Show the program guide when starting Live TV
+ Show the programme guide when starting Live TV
+
+
+ This starts the program guide immediately upon starting to watch Live TV.
+ This starts the programme guide immediately upon starting to watch Live TV.
+
+
+ General
+
+
+
+ General playback
+
+
+
+ General playback (part 2)
+
+
+
+ View Recordings
+
+
+
+ View Recordings (Recording Groups)
+
+
+
+ Seeking
+
+
+
+ Commercial Skip
+
+
+
+ Overscan
+
+
+
+ On-screen display
+
+
+
+ Mac OS X video settings
+
+
+
+ General (Basic)
+
+
+
+ General (Jobs)
+
+
+
+ General (Advanced)
+
+
+
+ Program Guide
+ Programme Guide
+
+
+ General Recording Priorities Settings
+
+
+
+ Screen settings
+
+
+
+ Localization
+
+
+
+ QT
+
+
+
+ Xbox
+
+
+
+ Theme Error
+
+
+
+ Your theme does not contain elements required to display the status screen.
+
+
+
+ Do you really want to exit MythTV?
+
+
+
+ No
+
+
+
+ Yes, Exit now
+
+
+
+ Yes, Exit and Shutdown
+
+
+
+ Directed By
+
+
+
+ Failed to get selector object
+
+
+
+ Myth could not locate the selector object within your theme.
+Please make sure that your ui.xml is valid.
+
+Myth will now exit.
+
+
+
+ Recording Available
+
+
+
+ This recording is currently in use by:
+
+
+
+ This recording is currently Available
+
+
+
+ Recording Unavailable
+
+
+
+ This recording is currently being deleted and is unavailable
+
+
+
+ The file for this recording can not be found
+
+
+
+ Listings Status
+
+
+
+ Tuner Status
+
+
+
+ Log Entries
+
+
+
+ Job Queue
+
+
+
+ Machine Status
+
+
+
+ Acknowledge all log entries at this priority level or lower?
+
+
+
+ Yes
+
+
+
+ Setting priority level to %1
+
+
+
+ Listings Status shows the latest status information from mythfilldatabase
+
+
+
+ Tuner Status shows the current information about the state of backend tuner cards
+
+
+
+ DVB Status
+
+
+
+ DVB Status shows the quality statistics of all DVB cards, if present
+
+
+
+ Log Entries shows any unread log entries from the system if you have logging enabled
+
+
+
+ Job Queue shows any jobs currently in Myth's Job Queue such as a commercial flagging job.
+
+
+
+ Machine Status shows some operating system statistics of this machine
+
+
+
+ and the MythTV server
+
+
+
+ Acknowledge this log entry?
+
+
+
+ Delete Job?
+
+
+
+ Pause
+
+
+
+ Stop
+
+
+
+ Job Queue Actions:
+
+
+
+ Resume
+
+
+
+ Requeue Job?
+
+
+
+ Myth version:
+
+
+
+ Last mythfilldatabase guide update:
+
+
+
+ Started:
+
+
+
+ Finished:
+
+
+
+ Result:
+
+
+
+ There's no guide data available!
+
+
+
+ Have you run mythfilldatabase?
+
+
+
+ There is guide data until
+
+
+
+ days
+
+
+
+ day
+
+
+
+ WARNING: is mythfilldatabase running?
+
+
+
+ DataDirect Status:
+
+
+
+ No items found at priority level %1 or lower.
+
+
+
+ Use 1-8 to change priority level.
+
+
+
+ Job Queue is currently empty.
+
+
+
+ %1 total, %2 used, %3 (or %4%) free.
+
+
+
+ Uptime
+
+
+
+ System
+
+
+
+ This machine
+
+
+
+ Load
+
+
+
+ unknown
+
+
+
+ failed
+
+
+
+ RAM
+
+
+
+ Swap
+
+
+
+ MythTV server
+
+
+
+ Disk usage on %1:
+ Disc usage on %1:
+
+
+ Period
+
+
+
+ start time
+
+
+
+ Defines a period the master backend should be awake
+
+
+
+ Set both Start & End times to 00:00 to disable.
+
+
+
+ end time
+
+
+
+ Automatically Start Myth Frontend
+
+
+
+ Mythwelcome will automatically start the mythfrontend if it is determined that it was not started to record a program.
+
+
+
+ Shutdown with Master Backend
+
+
+
+ Mythwelcome will automatically shutdown this computer when the master backend shuts down. Should only be set on frontend only machines
+
+
+
+ MythWelcome Settings
+
+
+
+ Daily Wakeup/ShutDown Period
+
+
+
+ nvram-wakeup Command
+
+
+
+ Command to set the wakeup time in the BIOS. See the README file for more examples.
+
+
+
+ nvram-wakeup Restart Command
+
+
+
+ Command to run if your bios requires you to reboot to allow nvram-wakeup settings to take effect. See the README file for more examples.
+
+
+
+ Command to reboot
+
+
+
+ Command to reboot computer.
+
+
+
+ Command to shutdown
+
+
+
+ Command to shutdown computer.
+
+
+
+ Command to run to start the Frontend
+
+
+
+ Command to start mythfrontend.
+
+
+
+ Command to run Xterm
+
+
+
+ Command to start an Xterm. Can be disabled by leaving this setting blank.
+
+
+
+ MythShutdown/MythWelcome Settings
+
+
+
+ IP address for
+
+
+
+ Enter the IP address of this machine. Use an externally accessible address (ie, not 127.0.0.1) if you are going to be running a frontend on a different machine than this one.
+
+
+
+ Port the server runs on
+
+
+
+ Unless you've got good reason to, don't change this.
+
+
+
+ Port the server shows status on
+
+
+
+ Port which the server will listen to for HTTP requests. Currently, it shows a little status information.
+
+
+
+ Master Server IP address
+
+
+
+ The IP address of the master backend server. All frontend and non-master backend machines will connect to this server. If you only have one backend, this should be the same IP address as above.
+
+
+
+ Port the master server runs on
+
+
+
+ Directory to hold recordings
+
+
+
+ All recordings get stored in this directory.
+
+
+
+ TV format
+
+
+
+ The TV standard to use for viewing TV.
+
+
+
+ VBI format
+
+
+
+ VBI stands for Vertical Blanking Interrupt. VBI is used to carry Teletext and Closed Captioning data.
+
+
+
+ Select the appropriate frequency table for your system. If you have an antenna, use a "-bcast" frequency.
+ Select the appropriate frequency table for your system. If you have an aerial, use a "-bcast" frequency.
+
+
+ Save original files after transcoding (globally)
+
+
+
+ Follow symbolic links when deleting files
+
+
+
+ This will cause Myth to follow symlinks when recordings and related files are deleted, instead of deleting the symlink and leaving the actual file.
+
+
+
+ Time offset for XMLTV listings
+
+
+
+ Adjust the relative timezone of the XMLTV EPG data read by mythfilldatabase. 'Auto' converts the XMLTV time to local time using your computer's timezone. 'None' ignores the XMLTV timezone, interpreting times as local.
+
+
+
+ EIT Transport Timeout (mins)
+
+
+
+ Maximum time to spend waiting for listings data on one DTV channel before checking for new listings data on the next channel.
+
+
+
+ Master Backend Override
+
+
+
+ If enabled, the master backend will stream and delete files if it finds them in the video directory. Useful if you are using a central storage location, like a NFS share, and your slave backend isn't running.
+
+
+
+ Reconnect wait time (secs)
+
+
+
+ Length of time the frontend waits between the tries to wake up the master backend. This should be the time your masterbackend needs to startup. Set 0 to disable.
+
+
+
+ Count of reconnect tries
+
+
+
+ Number of times the frontend will try to wake up the master backend.
+
+
+
+ Wake Command
+
+
+
+ The command used to wake up your master backend server.
+
+
+
+ Wake command for slaves
+
+
+
+ The command used to wakeup your slave backends. Leave empty to disable.
+
+
+
+ Idle timeout (secs)
+
+
+
+ The amount of time the master backend idles before it shuts down all backends. Set to 0 to disable auto shutdown.
+
+
+
+ Max. wait for recording (min)
+
+
+
+ The amount of time the master backend waits for a recording. If it's idle but a recording starts within this time period, the backends won't shut down.
+
+
+
+ Startup before rec. (secs)
+
+
+
+ The amount of time the master backend will be woken up before a recording starts.
+
+
+
+ Wakeup time format
+
+
+
+ The format of the time string passed to the 'setWakeuptime Command' as $time. See QT::QDateTime.toString() for details. Set to 'time_t' for seconds since epoch.
+
+
+
+ Set wakeuptime command
+
+
+
+ The command used to set the time (passed as $time) to wake up the masterbackend
+
+
+
+ Server halt command
+
+
+
+ The command used to halt the backends.
+
+
+
+ Pre Shutdown check-command
+
+
+
+ A command executed before the backend would shutdown. The return value determines if the backend can shutdown. 0 - yes, 1 - restart idleing, 2 - reset the backend to wait for a frontend.
+
+
+
+ Block shutdown before client connected
+
+
+
+ If set, the automatic shutdown routine will be disabled until a client connects.
+
+
+
+ Startup command
+
+
+
+ This command is executed right after starting the BE. As a parameter '$status' is replaced by either 'auto' if the machine was started automatically or 'user' if a user switched it on.
+
+
+
+ Maximum simultaneous jobs on this backend
+
+
+
+ The Job Queue will be limited to running this many simultaneous jobs on this backend.
+
+
+
+ Job Queue Check frequency (in seconds)
+
+
+
+ When looking for new jobs to process, the Job Queue will wait this long between checks.
+
+
+
+ CPU Usage
+
+
+
+ Low
+
+
+
+ Medium
+
+
+
+ High
+
+
+
+ This setting controls approximately how much CPU jobs in the queue may consume. On 'High', all available CPU time may be used which could cause problems on slower systems.
+
+
+
+ Job Queue Start Time
+
+
+
+ This setting controls the start of the Job Queue time window which determines when new jobs will be started.
+
+
+
+ Job Queue End Time
+
+
+
+ This setting controls the end of the Job Queue time window which determines when new jobs will be started.
+
+
+
+ Run Jobs only on original recording host
+
+
+
+ If set, jobs in the queue will be required to run on the backend that made the original recording.
+
+
+
+ Run Transcode Jobs before Auto-Commercial Flagging
+
+
+
+ If set, if both auto-transcode and auto commercial flagging are turned ON for a recording, transcoding will run first, otherwise, commercial flagging runs first.
+
+
+
+ Start Auto-Commercial Flagging jobs when the recording starts
+
+
+
+ If set and Auto Commercial Flagging is ON for a recording, the flagging job will be started as soon as the recording starts. NOT recommended on underpowered systems.
+
+
+
+ User Job #1 Description
+
+
+
+ The Description for this User Job.
+
+
+
+ User Job #1 Command
+
+
+
+ The command to run whenever this User Job number is scheduled.
+
+
+
+ User Job #2 Description
+
+
+
+ User Job #2 Command
+
+
+
+ User Job #3 Description
+
+
+
+ User Job #3 Command
+
+
+
+ User Job #4 Description
+
+
+
+ User Job #4 Command
+
+
+
+ Allow Commercial Detection jobs
+
+
+
+ Allow jobs of this type to run on this backend.
+
+
+
+ Allow Transcoding jobs
+
+
+
+ Allow 'User Job #1' jobs
+
+
+
+ Allow 'User Job #2' jobs
+
+
+
+ Allow 'User Job #3' jobs
+
+
+
+ Allow 'User Job #4' jobs
+
+
+
+ Host Address Backend Setup
+
+
+
+ Host-specific Backend Setup
+
+
+
+ Global Backend Setup
+
+
+
+ Shutdown/Wakeup Options
+
+
+
+ WakeOnLan settings
+
+
+
+ MasterBackend
+
+
+
+ Job Queue (Host-Specific)
+
+
+
+ Job Queue (Global)
+
+
+
+ Job Queue (Job Commands)
+
+
+
+ Path
+
+
+
+ doesn't exist
+
+
+
+ Cannot create a file
+
+
+
+ directory is not writable?
+
+
+
+ Card
+
+
+
+ type
+
+
+
+ is set to start on channel
+
+
+
+ which does not exist
+
+
+
+ WARNING
+
+
+
+ MythTV has detected that the backend is running.
+
+
+
+ Changing existing card inputs, deleting anything, or scanning for channels may not work.
+
+
+
+ Continue
+
+
+
+ Exit
+
+
+
+ Do you want to fix these problems?
+
+
+
+ Do you want to fix this problem?
+
+
+
+ Yes please
+
+
+
+ No, I know what I am doing
+
+
+
+ If this is the master backend server, please run 'mythfilldatabase' to populate the database with channel information.
+
+
+
+ Title Pronounce
+
+
+
+ Recording Rule
+
+
+
+ Search Phrase
+
+
+
+ Recorded File Size
+
+
+
+ Recording Profile
+
+
+
+ Allows the transcoder to resize the video during transcoding.
+
+
+
+ Lossless transcoding
+
+
+
+ Only reencode where absolutely needed (normally only around cutpoints). Otherwise keep audio and video formats identical to the source. This should result in the highest quality, but won't save as much space.
+
+
+
+ Enter group name or press SELECT to enter text via the On Screen Keyboard
+
+
+
+ Display Name (optional)
+
+
+
+ This name is displayed on screen when live TV begins and when changing the selected input or card. If you use this, make sure the information is unique for each input.
+
+
+
+ Enable DTS to SPDIF passthrough
+
+
+
+ Enable sending DTS audio directly to your sound card's SPDIF output, on sources which contain DTS soundtracks (usually DVDs). Requires that the audio output device be set to something suitable.
+
+
+
+ Samples are shown using today's date.
+
+
+
+ Samples are shown using tomorrow's date.
+
+
+
+ Your preferred time format. You must choose a format with "AM" or "PM" in it, otherwise your time display will be 24-hour or "military" time.
+
+
+
+ Run mythfilldatabase at time suggested by the grabber.
+
+
+
+ This setting allows a DataDirect guide data provider to specify the next download time in order to distribute load on their servers.
+
+
+
+ AutoExpire List
+
+
+
+ The AutoExpire List shows all recordings which may be expired and the order of their expiration. Recordings at the top of the list will be expired first.
+
+
+
+ Suggested Next:
+
+
+
+ , using your %1 rate of %2 Kb/sec
+
+
+
+ %1 hours left
+
+
+
+ %1 hours and %2 minutes left
+
+
+
+ %1 minutes left
+
+
+
+ average
+
+
+
+ maximum
+
+
+
+ When set and the transcoder is active, the original files will be renamed to .old once the transcoding is complete.
+
+
+
+ Specify either the exact frequency in kHz or a valid channel for your 'TV Format'.
+
+
+
+ Value to be added to your desired frequency in kHz, for 'fine tuning'.
+
+
+
+ Preserve Aspect Ratio of Video when resizing
+
+
+
+ Preserve the aspect ratio of the original recording file by ignoring the height setting above, and calculating the new height based on the aspect ratio and width.
+
+
+
+ Spain
+
+
+
+ Enable Network Remote Control interface
+
+
+
+ This enables support for controlling mythfrontend over the network.
+
+
+
+ Network Remote Control Port
+
+
+
+ This specifies what port the Network Remote Control interface will listen on for new connections.
+
+
+
+
+ ScanCountry
+
+ Country
+
+
+
+
+ ScanProgressPopup
+
+ Scan Progress
+
+
+
+ Status
+
+
+
+ Tuning
+
+
+
+ Scan
+
+
+
+ Signal Strength
+
+
+
+ Signal/Noise
+
+
+
+ Cancel
+
+
+
+ Locked
+
+
+
+ No Lock
+
+
+
+
+ ScanTypeSetting
+
+ Full Scan
+
+
+
+ Full Scan (Tuned)
+
+
+
+ Import channels.conf
+
+
+
+ Full Scan of Existing Transports
+
+
+
+ Existing Transport Scan
+
+
+
+
+ ScanWizardScanType
+
+ Scan Type
+
+
+
+
+ ScanWizardScanner
+
+ ScanWizard
+
+
+
+ Error tuning to transport
+
+
+
+ Scanning
+
+
+
+ Error starting scan
+
+
+
+ Failed to open :
+
+
+
+ Failed to parse :
+
+
+
+ Error parsing parameters
+
+
+
+
+ ScheduledRecording
+
+ or later
+
+
+
+
+ StartingChannel
+
+ DB Error, see console
+
+
+
+ Please add channels to this source
+
+
+
+
+ StatusBox
+
+ The theme you are using contains an unknown element ('%1'). It will be ignored
+
+
+
+ Tuner %1
+
+
+
+ is not available
+
+
+
+ is watching live TV
+
+
+
+ is recording
+
+
+
+ is not recording
+
+
+
+ On %1 %2 from %3.%4
+%5
+%6
+
+
+
+ On %1 %2 from %3.%4
+%5
+No other details
+
+
+
+ Job:
+
+
+
+ Status:
+
+
+
+ %1 recordings consuming %2 are allowed to expire
+
+
+
+ LiveTV
+
+
+
+ %1 of these are LiveTV and consume %2
+
+
+
+
+ TV
+
+ MythTV is already using all available inputs for recording. If you want to watch an in-progress recording, select one from the playback menu. If you want to watch live TV, cancel one of the in-progress recordings from the delete menu.
+
+
+
+ Cancel and go back to the TV menu
+
+
+
+ Record and watch while it records
+
+
+
+ Let it record and go back to the Main Menu
+
+
+
+ Don't let it record, I want to watch TV
+
+
+
+ %1 Settings
+
+
+
+ Seek:
+
+
+
+ Forward
+
+
+
+ Skip Ahead
+
+
+
+ Rewind
+
+
+
+ Skip Back
+
+
+
+ Previous Chapter
+
+
+
+ Jump Back
+
+
+
+ Next Chapter
+
+
+
+ Jump Ahead
+
+
+
+ Jump to Bookmark
+
+
+
+ Jump to Beginning
+
+
+
+ You are exiting this recording
+
+
+
+ Save this position and go to the menu
+
+
+
+ Do not save, just exit to the menu
+
+
+
+ Keep watching
+
+
+
+ Delete this recording
+
+
+
+ You are exiting this video
+
+
+
+ Exit to the menu
+
+
+
+ Play
+
+
+
+ Paused
+
+
+
+ Jump To
+
+
+
+ Speed 3X
+
+
+
+ Speed 2X
+
+
+
+ Speed 1/3X
+
+
+
+ Speed 1/8X
+
+
+
+ Speed 1/16X
+
+
+
+ Forward %1X
+
+
+
+ Rewind %1X
+
+
+
+ Stopping Transcode
+
+
+
+ Transcoding
+
+
+
+ Try Again
+
+
+
+ Searching...
+
+
+
+ Skip
+
+
+
+ Seek:
+ seek to location
+
+
+
+ Position
+
+
+
+ Partial Lock
+
+
+
+ No Lock
+
+
+
+ Lock
+
+
+
+ Signal %1%
+
+
+
+ You should have gotten a channel lock by now. You can continue to wait for a signal, or you can change the channels with %1 or %2, change input's (%3), capture cards (%4), etc.
+ The tuner should have locked to the channel by now. You can continue to wait for a signal, or you can change the channels with %1 or %2, change inputs (%3), capture cards (%4), etc.
+
+
+ OK
+
+
+
+ minutes
+
+
+
+ Brightness (REC) %1 %
+
+
+
+ Adjust Recording
+
+
+
+ Brightness %1 %
+
+
+
+ Adjust Picture
+
+
+
+ Contrast (REC) %1 %
+
+
+
+ Contrast %1 %
+
+
+
+ Colour (REC) %1 %
+
+
+
+ Colour %1 %
+
+
+
+ Hue (REC) %1 %
+
+
+
+ Hue %1 %
+
+
+
+ Volume %1 %
+
+
+
+ Adjust Volume
+
+
+
+ Time Stretch %1X
+
+
+
+ Adjust Time Stretch
+
+
+
+ Audio Resync
+
+
+
+ Audio Sync
+
+
+
+ Adjust Audio Sync
+
+
+
+ Mute Off
+
+
+
+ Mute On
+
+
+
+ Left Channel Muted
+
+
+
+ Right Channel Muted
+
+
+
+ Sleep
+
+
+
+ 4:3
+
+
+
+ 16:9
+
+
+
+ 4:3 Zoom
+
+
+
+ 16:9 Zoom
+
+
+
+ 16:9 Stretch
+
+
+
+ Fill
+
+
+
+ Off
+
+
+
+ Record
+
+
+
+ Cancel Record
+
+
+
+ Brightness
+
+
+
+ Contrast
+
+
+
+ Colour
+
+
+
+ Hue
+
+
+
+ Volume
+
+
+
+ (REC)
+
+
+
+ This program is currently being edited
+ This programme is currently being edited
+
+
+ Continue Editing
+
+
+
+ Do not edit
+
+
+
+ Program Guide
+ Programme Guide
+
+
+ Picture-in-Picture
+
+
+
+ Enable/Disable
+
+
+
+ Swap Channels
+
+
+
+ Change Active Window
+
+
+
+ Enable Browse Mode
+
+
+
+ Previous Channel
+
+
+
+ Edit Recording
+
+
+
+ Previous Recording
+
+
+
+ Stop Transcoding
+
+
+
+ Begin Transcoding
+
+
+
+ Commercial Auto-Skip
+
+
+
+ Auto-Skip OFF
+
+
+
+ Auto-Skip Notify
+
+
+
+ Auto-Skip ON
+
+
+
+ Turn Auto-Expire OFF
+
+
+
+ Turn Auto-Expire ON
+
+
+
+ Select Audio Track
+
+
+
+ Select Subtitles
+
+
+
+ Toggle Teletext
+
+
+
+ Closed Captioning
+
+
+
+ Toggle CC
+
+
+
+ CC
+
+
+
+ TXT
+
+
+
+ Change Aspect Ratio
+
+
+
+ Manual Zoom Mode
+
+
+
+ Adjust
+
+
+
+ 0.5X
+
+
+
+ 0.9X
+
+
+
+ 1.0X
+
+
+
+ 1.1X
+
+
+
+ 1.2X
+
+
+
+ 1.3X
+
+
+
+ 1.4X
+
+
+
+ 1.5X
+
+
+
+ Sleep
+
+
+
+ Sleep Off
+
+
+
+ Audio track
+
+
+
+ Subtitle track
+
+
+
+ Auto-Expire OFF
+
+
+
+ Auto-Expire ON
+
+
+
+ Zoom Mode ON
+
+
+
+ Zoom Mode OFF
+
+
+
+ MythTV is already using all available inputs for the channel you selected. If you want to watch an in-progress recording, select one from the playback menu. If you want to watch live TV, cancel one of the in-progress recordings from the delete menu.
+
+
+
+ TXT:
+
+
+
+ CC:
+
+
+
+ S/N %1dB
+
+
+
+ BE %1
+ Bit Errors
+
+
+
+ Speed 16X
+
+
+
+ Speed 8X
+
+
+
+ Speed 4X
+
+
+
+ Speed 1/2X
+
+
+
+ Speed 1/4X
+
+
+
+
+ ThemeUI
+
+ Scheduled Recordings:
+
+
+
+ Show (1) All (2) Important
+
+
+
+ Showing:
+
+
+
+ You Haven't Scheduled Any Programs To Be Recorded
+ You Haven't Scheduled Any Programmes To Be Recorded
+
+
+ To schedule a recording, exit this screen and
+
+
+
+ Select 'Program Guide' or 'Program Finder'
+ Select 'Programme Guide' or 'Programme Finder'
+
+
+ Preview Schedule Changes:
+
+
+
+ The recording schedule would not be affected.
+
+
+
+ Channel Recording Priorities
+
+
+
+ (1) Sort by Channel (2) Sort by Priority
+
+
+
+ Source:
+
+
+
+ Priority:
+
+
+
+ Program Recording Priorities
+ Programme Recording Priorities
+
+
+ Priority
+
+
+
+ Final Priority
+
+
+
+ (1) Sort by Title (2) Sort by Priority (4) Sort by Type
+
+
+
+ Record Type:
+
+
+
+ Channel:
+
+
+
+ Select a recording to permanently erase
+
+
+
+ Select a recording to watch
+
+
+
+ Select a recording to permanently erase:
+
+
+
+ Select a recording to watch:
+
+
+
+ Select a recording to permanently erase.
+
+
+
+ Select a recording to watch.
+
+
+
+ Sorry, No Recordings Available
+
+
+
+ Select 'Schedule a Recording' from the Main Menu
+
+
+
+ (4) Program Guide **(6) Program Finder **
+ (4) Programme Guide **(6) Programme Finder **
+
+
+ Select a letter...
+
+
+
+ Pick the letter in which the show starts with, then press SELECT or the right arrow
+
+
+
+ Select a program...
+ Select a programme...
+
+
+ Select the title of the program you wish to find. When finished return with the left arrow key. Press SELECT to schedule a recording.
+ Select the title of the programme you wish to find. When finished return with the left arrow key. Press SELECT to schedule a recording.
+
+
+ No Programs
+ No Programmes
+
+
+ There are no available programs under this search. Please select another search.
+ There are no available programmes under this search. Please select another search.
+
+
+ Program Listings
+ Programme Listings
+
+
+ (1)Time (2)Title
+
+
+
+ No listings found for this program.
+ No listings found for this programme.
+
+
+ Airdate:
+
+
+
+ Description:
+
+
+
+ System Status - Select a category to view the status
+
+
+
+ This screen displays the status of various system components
+
+
+
+ Program Details:
+
+
+
+ Program Details
+
+
+
+ Welcome to MythTV
+
+
+
+ MythTV is idle and will shutdown shortly.
+
+
+
+ Current Recording(s)
+
+
+
+ Retrieving Recording Status ...
+
+
+
+ Next Scheduled Recording(s)
+
+
+
+ Retrieving Scheduled Recordings ...
+
+
+
+ WARNING: There are conflicting scheduled recordings!
+
+
+
+
+ UIManagedTreeListType
+
+ Search
+
+
+
+ Starts with text
+
+
+
+ Contains text
+
+
+
+ Cancel
+
+
+
+
+ VideoSourceEditor
+
+ Video Source Menu
+
+
+
+ Edit..
+
+
+
+ Delete..
+
+
+
+ Are you sure you want to delete ALL video sources?
+
+
+
+ Yes, delete video sources
+
+
+
+ No, don't
+
+
+
+ Are you sure you want to delete this video source?
+
+
+
+ Yes, delete video source
+
+
+
+ Video sources
+
+
+
+
+ ViewScheduleDiff
+
+ The theme you are using does not contain a 'schdiff' element. Please contact the theme creator and ask if they could please update it.<br><br>The next screen will be empty. Escape out of it to return to the menu.
+
+
+
+ OK
+
+
+
+ All
+
+
+
+
+ ViewScheduled
+
+ Time Conflict
+
+
+
+ No Conflicts
+
+
+
+ All
+
+
+
+ Important
+
+
+
+
+ WelcomeDialog
+
+ Start Frontend
+
+
+
+ Cannot connect to server!
+
+
+
+ Tuner %1 is recording:
+
+
+
+
+ Tuner %1 is not recording
+
+
+
+ There are no recordings currently taking place
+
+
+
+ There are no scheduled recordings
+
+
+
+ Please Wait ...
+
+
+
+ MythTV is about to start recording.
+
+
+
+ MythTV is busy recording.
+
+
+
+ MythTV is busy transcoding.
+
+
+
+ MythTV is busy flagging commercials.
+
+
+
+ MythTV is busy grabbing EPG data.
+
+
+
+ MythTV is locked by a user.
+
+
+
+ MythTV is in a daily wakeup/shutdown period.
+
+
+
+ MythTV is about to start a wakeup/shutdown period.
+
+
+
+ MythTV is idle and will shutdown in %1 seconds.
+
+
+
+ MythTV is idle.
+
+
+
+ Menu
+
+
+
+ Unlock Shutdown
+
+
+
+ Lock Shutdown
+
+
+
+ Run mythfilldatabase
+
+
+
+ Shutdown Now
+
+
+
+ Exit
+
+
+
+ Cancel
+
+
+
+ Cannot shutdown because MythTV is currently recording
+
+
+
+ Cannot shutdown because MythTV is about to start recording
+
+
+
+ Cannot shutdown because MythTV is about to start a wakeup/shutdown period.
+
+
+
+
--- mythtv/themes/classic/mainmenu.xml.fix 2006-02-04 15:18:19.261570000 +0100
+++ mythtv/themes/classic/mainmenu.xml 2006-02-04 15:29:31.171570000 +0100
@@ -11,6 +11,7 @@
TV
TV
TV
+ TV
MENU tvmenu.xml
@@ -29,6 +30,7 @@
ミュージック
Glasba
Muusika
+ Muzyka
PLUGIN mythmusic
mythmusic
@@ -48,6 +50,7 @@
ビデオ
Filmi
Video
+ Filmy
PLUGIN mythvideo
mythvideo
@@ -63,6 +66,7 @@
DVD
DVD
DVD
+ DVD
PLUGIN mythdvd
mythdvd
@@ -78,6 +82,7 @@
Rádio FM
Radio
Radio
+ Radio
PLUGIN mythFM
mythFM
@@ -97,6 +102,7 @@
イメージ
Slike
Galerii
+ Zdjêcia
PLUGIN mythgallery
mythgallery
@@ -116,6 +122,7 @@
ゲーãƒ
Igre
Mängud
+ Gry
PLUGIN mythgame
mythgame
@@ -135,6 +142,7 @@
天気
Vreme
Ilm
+ Pogoda
PLUGIN mythweather
mythweather
@@ -153,6 +161,7 @@
Uudised
Nyheder
NotÃcias
+ Wiadomo¶ci
PLUGIN mythnews
mythnews
@@ -177,6 +186,7 @@
Navegação Web
Web
Internet
+ Internet
PLUGIN mythbookmarkmanager
mythbookmarkmanager
@@ -192,6 +202,7 @@
Telefone
Teléfono
Telefoon
+ Telefon
PLUGIN mythphone
mythphone
@@ -206,6 +217,7 @@
Receitas
Recetas
Recepten
+ Przepisy
PLUGIN mythRecipe
mythRecipe
@@ -217,6 +229,7 @@
Kirjuta DVD
Grabar DVD
DVD Branden
+ Nagraj DVD
PLUGIN mythburn
mythburn
@@ -229,6 +242,7 @@
Biotider
Horários de Cinema
Bioscoop Tijden
+ Movie Times
PLUGIN mythmovietime
mythmovietime
@@ -248,6 +262,7 @@
è¨å®š
Nastavitve
Seaded
+ Ustawienia
MENU main_settings.xml
@@ -260,6 +275,7 @@
Afslut
Desligar
Afsluiten
+ Wy³±cz
SHUTDOWN
-->
--- mythtv/themes/classic/main_settings.xml.fix 2006-02-04 15:18:35.631570000 +0100
+++ mythtv/themes/classic/main_settings.xml 2006-02-04 17:17:46.488434000 +0100
@@ -15,6 +15,7 @@
全般
Splošno
Ãœldine
+ Ogólne
SETTINGS MAINGENERAL
@@ -33,6 +34,7 @@
ç”»é¢è¡¨ç¤º
Vzgled
Kujundus
+ Wygl±d
SETTINGS APPEARANCE
@@ -46,6 +48,7 @@
Muuda klahve
Configurar Teclas
Toetsen Instellen
+ Edycja guzików
PLUGIN mythcontrols
mythcontrols
@@ -64,6 +67,7 @@
TVè¨å®š
TV nastavitve
TV seaded
+ Konfiguracja TV
MENU tv_settings.xml
@@ -81,6 +85,7 @@
ミュージックè¨å®š
Glasbene nastavitve
Muusika seaded
+ Konfiguracja Muzyki
CONFIGPLUGIN mythmusic
mythmusic
@@ -99,6 +104,7 @@
ビデオè¨å®š
Video nastavitve
Video seaded
+ Konfiguracja Filmów
CONFIGPLUGIN mythvideo
mythvideo
@@ -117,6 +123,7 @@
DVD nastavitve
DVD seaded
DVD Indstillinger
+ Konfiguracja DVD
CONFIGPLUGIN mythdvd
mythdvd
@@ -132,6 +139,7 @@
Configurar Rádio
Configurar Radio
Radio Instellingen
+ Konfiguracja Radia
CONFIGPLUGIN mythFM
mythFM
@@ -150,6 +158,7 @@
イメージè¨å®š
Nastavitve slik
Galerii seaded
+ Konfiguracja Galerii
CONFIGPLUGIN mythgallery
mythgallery
@@ -168,6 +177,7 @@
ゲームè¨å®š
Nastavitve iger
Mängude seaded
+ Konfiguracja Gier
CONFIGPLUGIN mythgame
mythgame
@@ -186,6 +196,7 @@
天気è¨å®š
Nastavitve vremena
Ilmateate seaded
+ Konfiguracja Pogody
CONFIGPLUGIN mythweather
mythweather
@@ -204,6 +215,7 @@
Uudiste seaded
Nyheds Indstillinger
Configurar NotÃcias
+ Konfiguracja Wiadomo¶ci
CONFIGPLUGIN mythnews
mythnews
@@ -214,6 +226,7 @@
NetFlix seaded
MythFlix
NetFlix Instellingen
+ Konfiguracja NetFlix
CONFIGPLUGIN mythflix
mythflix
@@ -230,6 +243,7 @@
Config. Navegação Web
Configurar Web
Internet Instellingen
+ Konfiguracja przegladarki WWW
CONFIGPLUGIN mythbookmarkmanager
mythbookmarkmanager
@@ -245,6 +259,7 @@
Configurar Receitas
Configurar Recetas
Recepten Instellingen
+ Konfiguracja Przepisów
CONFIGPLUGIN mythRecipe
mythRecipe
@@ -260,6 +275,7 @@
Configurar Telefone
Configurar Teléfono
Telefoon Instellingen
+ Konfiguracja Telefonu
CONFIGPLUGIN mythphone
mythphone
@@ -274,6 +290,7 @@
Biograf Indstillinger
Configurar Horários de Cinema
Bioscoop Instellingen
+ Konfiguracja MovieTime
CONFIGPLUGIN mythmovietime
mythmovietime
@@ -292,6 +309,7 @@
Nastavitve Xbox
Xbox-i seaded
XBox Indstillinger
+ Konfiguracja XBOX
SETTINGS XBOXSETTINGS
EnableXbox
@@ -303,6 +321,7 @@
DVD-kirjutaja seaded
Config. Grabación DVD
DVD Branden Instellingen
+ Konfiguracja nagrywarki DVD
CONFIGPLUGIN mythburn
mythburn
--- mythtv/i18n/i18n.pro.fix 2006-02-09 10:05:55.234583000 +0100
+++ mythtv/i18n/i18n.pro 2006-02-09 10:06:28.967708000 +0100
@@ -11,7 +11,7 @@
trans.files += mythfrontend_ja.qm mythfrontend_si.qm mythfrontend_fi.qm
trans.files += mythfrontend_zh_tw.qm mythfrontend_nb.qm mythfrontend_is.qm
trans.files += mythfrontend_pt_br.qm mythfrontend_en_gb.qm mythfrontend_cz.qm
-trans.files += mythfrontend_et.qm
+trans.files += mythfrontend_et.qm mythfrontend_pl.qm
INSTALLS += trans
--- mythtv/i18n/translate.pro.fix 2006-02-09 10:06:00.701848000 +0100
+++ mythtv/i18n/translate.pro 2006-02-09 10:06:49.267553000 +0100
@@ -69,4 +69,4 @@
TRANSLATIONS += mythfrontend_ja.ts mythfrontend_si.ts mythfrontend_fi.ts
TRANSLATIONS += mythfrontend_zh_tw.ts mythfrontend_nb.ts mythfrontend_is.ts
TRANSLATIONS += mythfrontend_pt_br.ts mythfrontend_en_gb.ts mythfrontend_cz.ts
-TRANSLATIONS += mythfrontend_et.ts
+TRANSLATIONS += mythfrontend_et.ts mythfrontend_pl.ts
--- mythtv/libs/libmyth/langsettings.cpp.fix 2006-02-09 10:07:23.450453000 +0100
+++ mythtv/libs/libmyth/langsettings.cpp 2006-02-09 10:08:35.904208000 +0100
@@ -146,6 +146,7 @@
<< QString::fromUtf8("Islenska") << "IS" // Icelandic
<< QString::fromUtf8("Norsk (bokmål)") << "NB" // Norwegian (Bokmål)
<< QString::fromUtf8("Svenska") << "SV" // Swedish
+ << QString::fromUtf8("Polski") << "PL" // Polish
<< QString::fromUtf8("Português") << "PT" // Portuguese
<< QString::fromUtf8("Nihongo") << "JA" // Japanese
<< QString::fromUtf8("Slovenski") << "SI" // Slovenian