---- linux-2.6.15.6/drivers/input/joystick/iforce/iforce-serio.c 2006-03-05 19:07:54.000000000 +0000
-+++ linux-2.6.15.6.iforce/drivers/input/joystick/iforce/iforce-serio.c 2006-04-29 23:17:59.000000000 +0000
-@@ -175,6 +175,12 @@
- .id = SERIO_ANY,
- .extra = SERIO_ANY,
- },
-+ {
-+ .type = SERIO_RS232,
-+ .proto = 0x1f, // Trust ForceFeedback Race Master
-+ .id = SERIO_ANY,
-+ .extra = SERIO_ANY,
-+ },
- { 0 }
- };
+; https://lkml.org/lkml/2019/7/10/244
+diff -ur linux-5.3/drivers/scsi/aacraid.org/aacraid.h linux-5.3/drivers/scsi/aacraid/aacraid.h
+--- linux-5.3/drivers/scsi/aacraid.org/aacraid.h 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/aacraid.h 2019-11-04 09:29:51.321486211 +0100
+@@ -2740,17 +2740,6 @@
+ int aac_rx_deliver_producer(struct fib * fib);
+ void aac_reinit_aif(struct aac_dev *aac, unsigned int index);
---- linux-2.6.27/arch/powerpc/include/asm/io.h~ 2006-06-18 01:49:35.000000000 +0000
-+++ linux-2.6.27/arch/powerpc/include/asm/io.h 2006-06-22 02:44:19.000000000 +0000
-@@ -445,6 +445,10 @@
- #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
- #define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-+#define isa_virt_to_bus virt_to_phys
-+#define isa_page_to_bus page_to_phys
-+#define isa_bus_to_virt phys_to_virt
-+
- /* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
---- linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-08-28 23:26:16.629658848 +0200
-@@ -6,4 +6,7 @@
- void save_processor_state(void);
- void restore_processor_state(void);
-
-+#define suspend2_faulted (0)
-+#define clear_suspend2_fault() do { } while(0)
-+
- #endif /* __ASM_POWERPC_SUSPEND_H */
---- linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:56.000000000 +0200
-+++ linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:42.000000000 +0200
-@@ -9,6 +9,7 @@
- * 2 of the License, or (at your option) any later version.
- */
-
-+#include <linux/module.h>
- #include <linux/sched.h>
- #include <asm/suspend.h>
- #include <asm/system.h>
-@@ -30,6 +31,7 @@
- #endif
+-static inline int aac_is_src(struct aac_dev *dev)
+-{
+- u16 device = dev->pdev->device;
+-
+- if (device == PMC_DEVICE_S6 ||
+- device == PMC_DEVICE_S7 ||
+- device == PMC_DEVICE_S8)
+- return 1;
+- return 0;
+-}
+-
+ static inline int aac_supports_2T(struct aac_dev *dev)
+ {
+ return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
+diff -ur linux-5.3/drivers/scsi/aacraid.org/comminit.c linux-5.3/drivers/scsi/aacraid/comminit.c
+--- linux-5.3/drivers/scsi/aacraid.org/comminit.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/comminit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -41,8 +41,11 @@
+ {
+ u32 status = 0;
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ status = src_readl(dev, MUnit.OMR);
++ }
+ return (status & AAC_INT_MODE_MSIX);
}
-+EXPORT_SYMBOL(save_processor_state);
- void restore_processor_state(void)
+@@ -349,7 +352,8 @@
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
+- if (aac_is_src(dev) &&
++ if ((dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) &&
+ dev->msi_enabled)
+ aac_set_intx_mode(dev);
+ return status;
+@@ -610,7 +614,8 @@
+ dev->max_fib_size = status[1] & 0xFFE0;
+ host->sg_tablesize = status[2] >> 16;
+ dev->sg_tablesize = status[2] & 0xFFFF;
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (host->can_queue > (status[3] >> 16) -
+ AAC_NUM_MGT_FIB)
+ host->can_queue = (status[3] >> 16) -
+@@ -629,7 +634,9 @@
+ pr_warn("numacb=%d ignored\n", numacb);
+ }
+
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+ /*
+ * Ok now init the communication subsystem
+diff -ur linux-5.3/drivers/scsi/aacraid.org/commsup.c linux-5.3/drivers/scsi/aacraid/commsup.c
+--- linux-5.3/drivers/scsi/aacraid.org/commsup.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/commsup.c 2019-11-04 09:29:51.321486211 +0100
+@@ -2593,7 +2593,9 @@
{
-
---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
+ int i;
- source "drivers/infiniband/hw/mthca/Kconfig"
---- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
-+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
-@@ -15,7 +15,8 @@
- #include <stdio.h>
- #include <ctype.h>
- #include "modpost.h"
--#include "../../include/generated/autoconf.h"
-+// PLD architectures don't use CONFIG_SYMBOL_PREFIX
-+//#include "../../include/generated/autoconf.h"
- #include "../../include/linux/license.h"
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++)
+ free_irq(pci_irq_vector(dev->pdev, i),
+diff -ur linux-5.3/drivers/scsi/aacraid.org/linit.c linux-5.3/drivers/scsi/aacraid/linit.c
+--- linux-5.3/drivers/scsi/aacraid.org/linit.c 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/linit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -1567,8 +1567,9 @@
+ aac_send_shutdown(aac);
- /* Some toolchains use a `_' prefix for all user symbols. */
-
-commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511
-Author: stephen hemminger <shemminger@vyatta.com>
-Date: Fri Feb 12 06:58:00 2010 +0000
-
- sky2: dont enable PME legacy mode
-
- This bit is not changed by vendor driver, and should be left alone.
- The documentation implies this a debug bit.
- 0 = WAKE# only asserted when VMAIN not available
- 1 = WAKE# is depend on wake events and independent of VMAIN.
-
- Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git b/drivers/net/sky2.c a/drivers/net/sky2.c
-index 2494842..edf37aa 100644
---- b/drivers/net/sky2.c
-+++ a/drivers/net/sky2.c
-@@ -733,6 +733,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
- unsigned port = sky2->port;
- enum flow_control save_mode;
- u16 ctrl;
-+ u32 reg1;
+ aac_adapter_disable_int(aac);
+-
+- if (aac_is_src(aac)) {
++ if (aac->pdev->device == PMC_DEVICE_S6 ||
++ aac->pdev->device == PMC_DEVICE_S7 ||
++ aac->pdev->device == PMC_DEVICE_S8) {
+ if (aac->max_msix > 1) {
+ for (i = 0; i < aac->max_msix; i++) {
+ free_irq(pci_irq_vector(aac->pdev, i),
+@@ -1858,7 +1859,8 @@
+ aac_adapter_enable_int(dev);
- /* Bring hardware out of reset */
- sky2_write16(hw, B0_CTST, CS_RST_CLR);
-@@ -786,6 +787,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
-+ /* Turn on legacy PCI-Express PME mode */
-+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- }
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+
+ if (dev->msi_enabled)
+
+--- linux-5.7/scripts/ld-version.sh~ 2020-06-01 01:49:15.000000000 +0200
++++ linux-5.7/scripts/ld-version.sh 2020-06-02 08:28:48.303207264 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/awk -f
++#!/bin/awk -f
+ # SPDX-License-Identifier: GPL-2.0
+ # extract linker version number from stdin and turn into single number
+ {