---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
-
- source "drivers/infiniband/hw/mthca/Kconfig"
---- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
-+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
-@@ -15,7 +15,8 @@
- #include <stdio.h>
- #include <ctype.h>
- #include "modpost.h"
--#include "../../include/generated/autoconf.h"
-+// PLD architectures don't use CONFIG_SYMBOL_PREFIX
-+//#include "../../include/generated/autoconf.h"
- #include "../../include/linux/license.h"
-
- /* Some toolchains use a `_' prefix for all user symbols. */
-
-commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511
-Author: stephen hemminger <shemminger@vyatta.com>
-Date: Fri Feb 12 06:58:00 2010 +0000
-
- sky2: dont enable PME legacy mode
-
- This bit is not changed by vendor driver, and should be left alone.
- The documentation implies this a debug bit.
- 0 = WAKE# only asserted when VMAIN not available
- 1 = WAKE# is depend on wake events and independent of VMAIN.
-
- Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git b/drivers/net/sky2.c a/drivers/net/sky2.c
-index 2494842..edf37aa 100644
---- b/drivers/net/sky2.c
-+++ a/drivers/net/sky2.c
-@@ -733,6 +733,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
- unsigned port = sky2->port;
- enum flow_control save_mode;
- u16 ctrl;
-+ u32 reg1;
-
- /* Bring hardware out of reset */
- sky2_write16(hw, B0_CTST, CS_RST_CLR);
-@@ -786,6 +787,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
-
-+ /* Turn on legacy PCI-Express PME mode */
-+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+; https://lkml.org/lkml/2019/7/10/244
+diff -ur linux-5.3/drivers/scsi/aacraid.org/aacraid.h linux-5.3/drivers/scsi/aacraid/aacraid.h
+--- linux-5.3/drivers/scsi/aacraid.org/aacraid.h 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/aacraid.h 2019-11-04 09:29:51.321486211 +0100
+@@ -2740,17 +2740,6 @@
+ int aac_rx_deliver_producer(struct fib * fib);
+ void aac_reinit_aif(struct aac_dev *aac, unsigned int index);
+
+-static inline int aac_is_src(struct aac_dev *dev)
+-{
+- u16 device = dev->pdev->device;
+-
+- if (device == PMC_DEVICE_S6 ||
+- device == PMC_DEVICE_S7 ||
+- device == PMC_DEVICE_S8)
+- return 1;
+- return 0;
+-}
+-
+ static inline int aac_supports_2T(struct aac_dev *dev)
+ {
+ return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
+diff -ur linux-5.3/drivers/scsi/aacraid.org/comminit.c linux-5.3/drivers/scsi/aacraid/comminit.c
+--- linux-5.3/drivers/scsi/aacraid.org/comminit.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/comminit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -41,8 +41,11 @@
+ {
+ u32 status = 0;
+
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ status = src_readl(dev, MUnit.OMR);
++ }
+ return (status & AAC_INT_MODE_MSIX);
}
-On Sat, 2 Jul 2011, Andi Kleen wrote:
-
-> > The problem is that blk_peek_request() calls scsi_prep_fn(), which
-> > does this:
-> >
-> > struct scsi_device *sdev = q->queuedata;
-> > int ret = BLKPREP_KILL;
-> >
-> > if (req->cmd_type == REQ_TYPE_BLOCK_PC)
-> > ret = scsi_setup_blk_pc_cmnd(sdev, req);
-> > return scsi_prep_return(q, req, ret);
-> >
-> > It doesn't check to see if sdev is NULL, nor does
-> > scsi_setup_blk_pc_cmnd(). That accounts for this error:
->
-> I actually added a NULL check in scsi_setup_blk_pc_cmnd early on,
-> but that just caused RCU CPU stalls afterwards and then eventually
-> a hung system.
-
-The RCU problem is likely to be a separate issue. It might even be a
-result of the use-after-free problem with the elevator.
-
-At any rate, it's clear that the crash in the refcounting log you
-posted occurred because scsi_setup_blk_pc_cmnd() called
-scsi_prep_state_check(), which tried to dereference the NULL pointer.
-
-Would you like to try this patch to see if it fixes the problem? As I
-said before, I'm not certain it's the best thing to do, but it worked
-on my system.
-
-Alan Stern
-
-
-
-
-Index: usb-3.0/drivers/scsi/scsi_lib.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_lib.c
-+++ usb-3.0/drivers/scsi/scsi_lib.c
-@@ -1247,6 +1247,8 @@ int scsi_prep_fn(struct request_queue *q
- struct scsi_device *sdev = q->queuedata;
- int ret = BLKPREP_KILL;
-+ if (!sdev)
-+ return ret;
- if (req->cmd_type == REQ_TYPE_BLOCK_PC)
- ret = scsi_setup_blk_pc_cmnd(sdev, req);
- return scsi_prep_return(q, req, ret);
-Index: usb-3.0/drivers/scsi/scsi_sysfs.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_sysfs.c
-+++ usb-3.0/drivers/scsi/scsi_sysfs.c
-@@ -322,6 +322,8 @@ static void scsi_device_dev_release_user
- kfree(evt);
+@@ -349,7 +352,8 @@
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
+- if (aac_is_src(dev) &&
++ if ((dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) &&
+ dev->msi_enabled)
+ aac_set_intx_mode(dev);
+ return status;
+@@ -610,7 +614,8 @@
+ dev->max_fib_size = status[1] & 0xFFE0;
+ host->sg_tablesize = status[2] >> 16;
+ dev->sg_tablesize = status[2] & 0xFFFF;
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (host->can_queue > (status[3] >> 16) -
+ AAC_NUM_MGT_FIB)
+ host->can_queue = (status[3] >> 16) -
+@@ -629,7 +634,9 @@
+ pr_warn("numacb=%d ignored\n", numacb);
}
-+ /* Freeing the queue signals to block that we're done */
-+ scsi_free_queue(sdev->request_queue);
- blk_put_queue(sdev->request_queue);
- /* NULL queue means the device can't be used */
- sdev->request_queue = NULL;
-@@ -936,8 +938,6 @@ void __scsi_remove_device(struct scsi_de
- /* cause the request function to reject all I/O requests */
- sdev->request_queue->queuedata = NULL;
-
-- /* Freeing the queue signals to block that we're done */
-- scsi_free_queue(sdev->request_queue);
- put_device(dev);
- }
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at http://www.tux.org/lkml/
---- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
-+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
-@@ -9,6 +9,12 @@
- $cc -print-file-name=lib${lib}.${ext} | grep -q /
- if [ $? -eq 0 ]; then
- echo "-l${lib}"
-+ for libt in tinfow tinfo ; do
-+ $cc -print-file-name=lib${libt}.${ext} | grep -q /
-+ if [ $? -eq 0 ]; then
-+ echo "-l${libt}"
-+ fi
-+ done
- exit
- fi
- done
-
-
-
-commit 745718132c3c7cac98a622b610e239dcd5217f71
-Author: Hannes Reinecke <hare@suse.de>
-Date: Wed Nov 9 08:39:24 2011 +0100
-
- [SCSI] Silencing 'killing requests for dead queue'
-
- When we tear down a device we try to flush all outstanding
- commands in scsi_free_queue(). However the check in
- scsi_request_fn() is imperfect as it only signals that
- we _might start_ aborting commands, not that we've actually
- aborted some.
- So move the printk inside the scsi_kill_request function,
- this will also give us a hint about which commands are aborted.
-
- Signed-off-by: Hannes Reinecke <hare@suse.de>
- Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
-diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
-index 06bc265..f85cfa6 100644
---- a/drivers/scsi/scsi_lib.c
-+++ b/drivers/scsi/scsi_lib.c
-@@ -1409,6 +1409,8 @@ static void scsi_kill_request(struct request *req, struct request_queue *q)
-
- blk_start_request(req);
-
-+ scmd_printk(KERN_INFO, cmd, "killing request\n");
-+
- sdev = cmd->device;
- starget = scsi_target(sdev);
- shost = sdev->host;
-@@ -1490,7 +1492,6 @@ static void scsi_request_fn(struct request_queue *q)
- struct request *req;
-
- if (!sdev) {
-- printk("scsi: killing requests for dead queue\n");
- while ((req = blk_peek_request(q)) != NULL)
- scsi_kill_request(req, q);
- return;
->From 4467601416e23740fc940c31b1fffacbcb69b4a0 Mon Sep 17 00:00:00 2001
-From: Corey Minyard <cminyard@mvista.com>
-Date: Mon, 21 Nov 2011 14:26:20 -0600
-Subject: [PATCH] ipmi_watchdog: Restore settings when BMC reset
-
-If the BMC gets reset, it will return 0x80 response errors. In this case,
-it is probably a good idea to restore the IPMI settings.
----
- drivers/char/ipmi/ipmi_watchdog.c | 41 ++++++++++++++++++++++++++++++++++--
- 1 files changed, 38 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
-index c2917ffa..34767a6 100644
---- a/drivers/char/ipmi/ipmi_watchdog.c
-+++ b/drivers/char/ipmi/ipmi_watchdog.c
-@@ -139,6 +139,8 @@
- #define IPMI_WDOG_SET_TIMER 0x24
- #define IPMI_WDOG_GET_TIMER 0x25
-
-+#define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80
-+
- /* These are here until the real ones get into the watchdog.h interface. */
- #ifndef WDIOC_GETTIMEOUT
- #define WDIOC_GETTIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 20, int)
-@@ -596,6 +598,7 @@ static int ipmi_heartbeat(void)
- struct kernel_ipmi_msg msg;
- int rv;
- struct ipmi_system_interface_addr addr;
-+ int timeout_retries = 0;
-
- if (ipmi_ignore_heartbeat)
- return 0;
-@@ -616,6 +619,7 @@ static int ipmi_heartbeat(void)
-
- mutex_lock(&heartbeat_lock);
-
-+restart:
- atomic_set(&heartbeat_tofree, 2);
-
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
/*
-@@ -653,7 +657,33 @@ static int ipmi_heartbeat(void)
- /* Wait for the heartbeat to be sent. */
- wait_for_completion(&heartbeat_wait);
-
-- if (heartbeat_recv_msg.msg.data[0] != 0) {
-+ if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) {
-+ timeout_retries++;
-+ if (timeout_retries > 3) {
-+ printk(KERN_ERR PFX ": Unable to restore the IPMI"
-+ " watchdog's settings, giving up.\n");
-+ rv = -EIO;
-+ goto out_unlock;
-+ }
-+
-+ /*
-+ * The timer was not initialized, that means the BMC was
-+ * probably reset and lost the watchdog information. Attempt
-+ * to restore the timer's info. Note that we still hold
-+ * the heartbeat lock, to keep a heartbeat from happening
-+ * in this process, so must say no heartbeat to avoid a
-+ * deadlock on this mutex.
-+ */
-+ rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
-+ if (rv) {
-+ printk(KERN_ERR PFX ": Unable to send the command to"
-+ " set the watchdog's settings, giving up.\n");
-+ goto out_unlock;
-+ }
-+
-+ /* We might need a new heartbeat, so do it now */
-+ goto restart;
-+ } else if (heartbeat_recv_msg.msg.data[0] != 0) {
- /*
- * Got an error in the heartbeat response. It was already
- * reported in ipmi_wdog_msg_handler, but we should return
-@@ -662,6 +692,7 @@ static int ipmi_heartbeat(void)
- rv = -EINVAL;
- }
-
-+out_unlock:
- mutex_unlock(&heartbeat_lock);
-
- return rv;
-@@ -922,11 +953,15 @@ static struct miscdevice ipmi_wdog_miscdev = {
- static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg,
- void *handler_data)
+ * Ok now init the communication subsystem
+diff -ur linux-5.3/drivers/scsi/aacraid.org/commsup.c linux-5.3/drivers/scsi/aacraid/commsup.c
+--- linux-5.3/drivers/scsi/aacraid.org/commsup.c 2019-11-01 22:42:37.014803249 +0100
++++ linux-5.3/drivers/scsi/aacraid/commsup.c 2019-11-04 09:29:51.321486211 +0100
+@@ -2593,7 +2593,9 @@
{
-- if (msg->msg.data[0] != 0) {
-+ if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER &&
-+ msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP)
-+ printk(KERN_INFO PFX "response: The IPMI controller appears"
-+ " to have been reset, will attempt to reinitialize"
-+ " the watchdog timer\n");
-+ else if (msg->msg.data[0] != 0)
- printk(KERN_ERR PFX "response: Error %x on cmd %x\n",
- msg->msg.data[0],
- msg->msg.cmd);
-- }
-
- ipmi_free_recv_msg(msg);
- }
---
-1.7.4.1
-
+ int i;
+
+- if (aac_is_src(dev)) {
++ if (dev->pdev->device == PMC_DEVICE_S6 ||
++ dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8) {
+ if (dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++)
+ free_irq(pci_irq_vector(dev->pdev, i),
+diff -ur linux-5.3/drivers/scsi/aacraid.org/linit.c linux-5.3/drivers/scsi/aacraid/linit.c
+--- linux-5.3/drivers/scsi/aacraid.org/linit.c 2019-11-01 22:42:37.011469816 +0100
++++ linux-5.3/drivers/scsi/aacraid/linit.c 2019-11-04 09:29:51.321486211 +0100
+@@ -1567,8 +1567,9 @@
+ aac_send_shutdown(aac);
+
+ aac_adapter_disable_int(aac);
+-
+- if (aac_is_src(aac)) {
++ if (aac->pdev->device == PMC_DEVICE_S6 ||
++ aac->pdev->device == PMC_DEVICE_S7 ||
++ aac->pdev->device == PMC_DEVICE_S8) {
+ if (aac->max_msix > 1) {
+ for (i = 0; i < aac->max_msix; i++) {
+ free_irq(pci_irq_vector(aac->pdev, i),
+@@ -1858,7 +1859,8 @@
+ aac_adapter_enable_int(dev);
+
+
+- if (aac_is_src(dev))
++ if (dev->pdev->device == PMC_DEVICE_S7 ||
++ dev->pdev->device == PMC_DEVICE_S8)
+ aac_define_int_mode(dev);
+
+ if (dev->msi_enabled)
+
+--- linux-5.7/scripts/ld-version.sh~ 2020-06-01 01:49:15.000000000 +0200
++++ linux-5.7/scripts/ld-version.sh 2020-06-02 08:28:48.303207264 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/awk -f
++#!/bin/awk -f
+ # SPDX-License-Identifier: GPL-2.0
+ # extract linker version number from stdin and turn into single number
+ {