---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
-
- source "drivers/infiniband/hw/mthca/Kconfig"
--- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
@@ -15,7 +15,8 @@
/* Some toolchains use a `_' prefix for all user symbols. */
-commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511
-Author: stephen hemminger <shemminger@vyatta.com>
-Date: Fri Feb 12 06:58:00 2010 +0000
-
- sky2: dont enable PME legacy mode
-
- This bit is not changed by vendor driver, and should be left alone.
- The documentation implies this a debug bit.
- 0 = WAKE# only asserted when VMAIN not available
- 1 = WAKE# is depend on wake events and independent of VMAIN.
-
- Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git b/drivers/net/sky2.c a/drivers/net/sky2.c
-index 2494842..edf37aa 100644
---- b/drivers/net/sky2.c
-+++ a/drivers/net/sky2.c
-@@ -733,6 +733,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
- unsigned port = sky2->port;
- enum flow_control save_mode;
- u16 ctrl;
-+ u32 reg1;
-
- /* Bring hardware out of reset */
- sky2_write16(hw, B0_CTST, CS_RST_CLR);
-@@ -786,6 +787,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
-
-+ /* Turn on legacy PCI-Express PME mode */
-+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- }
-On Sat, 2 Jul 2011, Andi Kleen wrote:
-
-> > The problem is that blk_peek_request() calls scsi_prep_fn(), which
-> > does this:
-> >
-> > struct scsi_device *sdev = q->queuedata;
-> > int ret = BLKPREP_KILL;
-> >
-> > if (req->cmd_type == REQ_TYPE_BLOCK_PC)
-> > ret = scsi_setup_blk_pc_cmnd(sdev, req);
-> > return scsi_prep_return(q, req, ret);
-> >
-> > It doesn't check to see if sdev is NULL, nor does
-> > scsi_setup_blk_pc_cmnd(). That accounts for this error:
->
-> I actually added a NULL check in scsi_setup_blk_pc_cmnd early on,
-> but that just caused RCU CPU stalls afterwards and then eventually
-> a hung system.
-
-The RCU problem is likely to be a separate issue. It might even be a
-result of the use-after-free problem with the elevator.
-
-At any rate, it's clear that the crash in the refcounting log you
-posted occurred because scsi_setup_blk_pc_cmnd() called
-scsi_prep_state_check(), which tried to dereference the NULL pointer.
-
-Would you like to try this patch to see if it fixes the problem? As I
-said before, I'm not certain it's the best thing to do, but it worked
-on my system.
-
-Alan Stern
-
-
-
-
-Index: usb-3.0/drivers/scsi/scsi_lib.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_lib.c
-+++ usb-3.0/drivers/scsi/scsi_lib.c
-@@ -1247,6 +1247,8 @@ int scsi_prep_fn(struct request_queue *q
- struct scsi_device *sdev = q->queuedata;
- int ret = BLKPREP_KILL;
-
-+ if (!sdev)
-+ return ret;
- if (req->cmd_type == REQ_TYPE_BLOCK_PC)
- ret = scsi_setup_blk_pc_cmnd(sdev, req);
- return scsi_prep_return(q, req, ret);
-Index: usb-3.0/drivers/scsi/scsi_sysfs.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_sysfs.c
-+++ usb-3.0/drivers/scsi/scsi_sysfs.c
-@@ -322,6 +322,8 @@ static void scsi_device_dev_release_user
- kfree(evt);
- }
-
-+ /* Freeing the queue signals to block that we're done */
-+ scsi_free_queue(sdev->request_queue);
- blk_put_queue(sdev->request_queue);
- /* NULL queue means the device can't be used */
- sdev->request_queue = NULL;
-@@ -936,8 +938,6 @@ void __scsi_remove_device(struct scsi_de
- /* cause the request function to reject all I/O requests */
- sdev->request_queue->queuedata = NULL;
-
-- /* Freeing the queue signals to block that we're done */
-- scsi_free_queue(sdev->request_queue);
- put_device(dev);
- }
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at http://www.tux.org/lkml/
--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
@@ -9,6 +9,12 @@
exit
fi
done
-
-
-Fixes a possible memory corruption when the link is larger than
-MAXPATHLEN and XFS_DEBUG is not enabled. This also remove the
-S_ISLNK assert, since the inode mode is checked previously in
-xfs_readlink_by_handle() and via VFS.
-
-Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
+From 5d12f71723762a39435d054d02bbf5fb87c5cd14 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Arkadiusz=20Mi=C5=9Bkiewicz?= <arekm@maven.pl>
+Date: Mon, 6 Feb 2017 14:45:15 +0100
+Subject: [PATCH] mac80211: Print text for disassociation reason
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When disassociation happens only numeric reason is printed
+in ieee80211_rx_mgmt_disassoc(). Add text variant, too.
+
+Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
---
- fs/xfs/xfs_vnodeops.c | 11 ++++++++---
- 1 files changed, 8 insertions(+), 3 deletions(-)
-
-diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
-index 51fc429..c3288be 100644
---- a/fs/xfs/xfs_vnodeops.c
-+++ b/fs/xfs/xfs_vnodeops.c
-@@ -123,13 +123,18 @@ xfs_readlink(
+ net/mac80211/mlme.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
+index 098ce9b179ee..fcf8d0aa66ec 100644
+--- a/net/mac80211/mlme.c
++++ b/net/mac80211/mlme.c
+@@ -2801,8 +2801,9 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
+
+ reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
- xfs_ilock(ip, XFS_ILOCK_SHARED);
+- sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
+- mgmt->sa, reason_code);
++ sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
++ mgmt->sa, reason_code,
++ ieee80211_get_reason_code_string(reason_code));
-- ASSERT(S_ISLNK(ip->i_d.di_mode));
-- ASSERT(ip->i_d.di_size <= MAXPATHLEN);
--
- pathlen = ip->i_d.di_size;
- if (!pathlen)
- goto out;
+ ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
-+ if (pathlen > MAXPATHLEN) {
-+ xfs_alert(mp, "%s: inode (%llu) symlink length (%d) too long",
-+ __func__, (unsigned long long)ip->i_ino, pathlen);
-+ ASSERT(0);
-+ return XFS_ERROR(EFSCORRUPTED);
-+ }
-+
-+
- if (ip->i_df.if_flags & XFS_IFINLINE) {
- memcpy(link, ip->i_df.if_u1.if_data, pathlen);
- link[pathlen] = '\0';
--
-1.7.6.2
+2.11.0
+
+From: Shaohua Li <shli@fb.com>
+
+Basically this is a copy of commit 001e4a8775f6(ext4: implement cgroup
+writeback support). Tested with a fio test, verified writeback is
+throttled against cgroup io.max write bandwidth, also verified moving
+the fio test to another cgroup and the writeback is throttled against
+new cgroup setting.
-_______________________________________________
-xfs mailing list
-xfs@oss.sgi.com
-http://oss.sgi.com/mailman/listinfo/xfs
+Cc: Tejun Heo <tj@kernel.org>
+Signed-off-by: Shaohua Li <shli@fb.com>
+---
+ fs/xfs/xfs_aops.c | 2 ++
+ fs/xfs/xfs_super.c | 1 +
+ 2 files changed, 3 insertions(+)
+
+diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
+index f18e593..6535054 100644
+--- a/fs/xfs/xfs_aops.c
++++ b/fs/xfs/xfs_aops.c
+@@ -630,8 +630,10 @@ xfs_add_to_ioend(
+ if (wpc->ioend)
+ list_add(&wpc->ioend->io_list, iolist);
+ wpc->ioend = xfs_alloc_ioend(inode, wpc->io_type, offset, bh);
++ wbc_init_bio(wbc, wpc->ioend->io_bio);
+ }
+
++ wbc_account_io(wbc, bh->b_page, bh->b_size);
+ /*
+ * If the buffer doesn't fit into the bio we need to allocate a new
+ * one. This shouldn't happen more than once for a given buffer.
+diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
+index 584cf2d..aea3bc2 100644
+--- a/fs/xfs/xfs_super.c
++++ b/fs/xfs/xfs_super.c
+@@ -1634,6 +1634,7 @@ xfs_fs_fill_super(
+ sb->s_max_links = XFS_MAXLINK;
+ sb->s_time_gran = 1;
+ set_posix_acl_flag(sb);
++ sb->s_iflags |= SB_I_CGROUPWB;
+
+ /* version 5 superblocks support inode version counters. */
+ if (XFS_SB_VERSION_NUM(&mp->m_sb) == XFS_SB_VERSION_5)
projects / packages / kernel.git / blobdiff