- initial pld release

Changed files:
    fxload.spec -> 1.1

diff --git a/fxload.spec b/fxload.spec
new file mode 100644 (file)
index 0000000..2158937
--- /dev/null
+++ b/fxload.spec
@@ -0,0 +1,69 @@
+Summary:       EZ-USB utility program
+Summary(pl):   Narzêdzie dla chipów EZ-USB
+Name:          fxload
+Version:       2002_04_11
+Release:       1
+Group:         Applications/System
+License:       GPL
+URL:           http://linux-hotplug.sourceforge.net/
+Source0:       http://unc.dl.sourceforge.net/sourceforge/linux-hotplug/%{name}-%{version}.tar.gz
+BuildRoot:     %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+
+%description
+This package contains utilities for downloading firmware to EZ-USB
+devices. EZ-USB devices use 8051-based microcontrollers that have been
+enhanced with registers, buffers, and other device-side support for
+USB transactions.
+
+It currently supports devices based on the Anchorchips EZ-USB, as well
+as the Cypress EZ-USB FX (which is almost completely source
+compatible) and EZ-USB FX2 (which is not). All of these support full
+speed (12 Mbit/sec) transfers. The FX2 also supports high speed (480
+Mbit/s) transfers, introduced in USB 2.0.
+
+This version of FXLOAD supports optional use of two-stage loading,
+where special device firmware is used to support writing into off-chip
+memory such as RAM (when firmware neeeds more than about 8 KBytes of
+code and data) or, for firmware development, I2C serial EEPROM.
+
+%description -l pl
+Ten pakiet zawiera narzêdzia do wgrywania oprogramowania do urz±dzeñ
+EZ-USB. Urz±dzenia EZ-USB u¿ywaj± mikrokontrolerów bazuj±cych na 8051
+rozszerzonych o dodatkowe rejestry, bufory i inne rozszerzenia dla
+transakcji USB.
+
+Obecnie wspiera urz±dzenia bazuj±ce na Anchorchips EZ-USB jak równie¿
+Cypress EZ-USB FX (który jest niemal kompletnie ¼ród³owo
+kompatybilny), a tak¿e EZ-USB FX2 (który nie jest kompatybilny).
+Wszystkie te chipy obs³uguj± transfery z pe³n± prêdko¶ci± (12Mbit/s).
+Chip FX2 dodatkowo wspiera transfery wysokiej prêdko¶ci (480Mbit/s)
+wprowadzone w USB 2.0.
+
+Ta wersja FXLOAD opcjonalnie wspiera dwu-etapowe ³adowanie, gdzie
+specjalne firmware u¿ywane jest do obs³ugi zapisywania do pamiêci
+znajduj±cej siê poza chipem takiej jak RAM (w momencie gdy firmware
+potrzebuje wiêcej ni¿ 8Kbajtów kodu i danych) lub w przypadku
+rozwijania firmware, I2C szeregowej EEPROM.
+
+%prep
+%setup -q
+
+%build
+%{__make} all \
+       CC="%{__cc}" \
+       CFLAGS="%{rpmcflags} -DFXLOAD_VERSION=\\\"%version\\\""
+
+%install
+rm -rf $RPM_BUILD_ROOT
+
+%{__make} install \
+       prefix=$RPM_BUILD_ROOT
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(644,root,root,755)
+%doc README.txt
+%attr(755,root,root) /sbin/*
+%{_mandir}/man?/*
+%{_datadir}/usb/*.hex