X-Git-Url: http://git.pld-linux.org/?p=packages%2Fftpd-BSD.git;a=blobdiff_plain;f=ftpd-BSD.spec;h=2c1a068db98737df5a0f280adf528787b352b148;hp=9c7e967b5c29cab4b656775b2c77db29febf5e6e;hb=5d04964fc9eb018905ca414de995ca04961b1cb1;hpb=4567027991d3dc240c555dc9ed6994015677555e

diff --git a/ftpd-BSD.spec b/ftpd-BSD.spec
index 9c7e967..2c1a068 100644
--- a/ftpd-BSD.spec
+++ b/ftpd-BSD.spec
@@ -1,25 +1,28 @@
 Summary:	OpenBSD's ftpd ported to Linux (with IPv6 support)
-Summary(pl):	Port ftpd z OpenBSD dla Linuxa (z obs³ug± IPv6)
+Summary(pl):	Port ftpd z OpenBSD dla Linuksa (z obs³ug± IPv6)
 Name:		ftpd-BSD
 Version:	0.3.3
-Release:	7
+Release:	10
 License:	BSD-like
 Group:		Networking/Daemons
 Source0:	ftp://quatramaran.ens.fr/pub/madore/ftpd-BSD/contrib/%{name}-%{version}.tar.gz
+# Source0-md5:	db925235417c8699bb1eb8ca77811fc5
 Source1:	%{name}.inetd
 Source2:	%{name}.pamd
 Source3:	%{name}-ftpusers
 Source4:	ftpusers.tar.bz2
+# Source4-md5: 76c80b6ec9f4d079a1e27316edddbe16
 Patch0:		%{name}-anonuser.patch
 Patch1:		%{name}-paths.patch
 Patch2:		%{name}-username.patch
 Patch3:		%{name}-SA_LEN.patch
 Patch4:		%{name}-no_libnsl.patch
 URL:		http://www.eleves.ens.fr:8080/home/madore/programs/#prog_ftpd-BSD
-Buildrequires:	libwrap-devel
-Buildrequires:	pam-devel
+BuildRequires:	libwrap-devel
+BuildRequires:	pam-devel
 Requires:	rc-inetd
 Requires:	inetdaemon
+Requires:	pam >= 0.77.3
 BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)
 Provides:	ftpserver
 Obsoletes:	ftpserver
@@ -49,19 +52,20 @@ is after release 2.7). The ftpd version number is 6.5 and this port's
 version number is 0.3.2.
 
 Package comes with anonymous upload disabled. If you really want to
-enable it - chmod /home/ftp/upload to 0730.
+enable it - chmod /home/services/ftp/upload to 0730.
 
 %description -l pl
 Pakiet ten zawiera linuksowy port serwera ftp BSD (ftpd). Nie zawiera
 on wszystkich wymy¶lnych elementów wu-ftpd, jest jednak
-prawdopodobniej mniej zapluskwiony i bardziej bezpieczny (w kazdym
+prawdopodobniej mniej zapluskwiony i bardziej bezpieczny (w ka¿dym
 razie by³ takim zanim go przenios³em na Linuksa, i mam nadziejê, ¿e
 nie naba³agani³em *za bardzo*). Kod ¼ród³owy pochodzi z repozytorium
 CVS OpenBSD z dnia 2000/07/07 (tj. po wersji 2.7). Numer wersji ftpd
 to 6.5, za¶ numer wersji tego portu to 0.3.2.
 
 Pakiet przychodzi z wy³±czonym anonimowym uploadem. Je¶li naprawdê
-chcesz go w³±czyæ - zmieñ uprawnienia do /home/ftp/upload na 0730.
+chcesz go w³±czyæ - zmieñ uprawnienia do /home/services/ftp/upload
+na 0730.
 
 %prep
 %setup -q -n ftpd-bsd-%{version}
@@ -78,7 +82,7 @@ chcesz go w
 rm -rf $RPM_BUILD_ROOT
 install -d $RPM_BUILD_ROOT{%{_sbindir},%{_mandir}/man8} \
 	$RPM_BUILD_ROOT%{_sysconfdir}/{ftpd,pam.d,sysconfig/rc-inetd} \
-	$RPM_BUILD_ROOT/home/ftp/{upload,pub}
+	$RPM_BUILD_ROOT/home/services/ftp/{upload,pub}
 
 install ftpd $RPM_BUILD_ROOT%{_sbindir}/ftpd-BSD
 install ftpd.8 $RPM_BUILD_ROOT%{_mandir}/man8/
@@ -108,12 +112,12 @@ fi
 %doc README*
 %attr(755,root,root) %{_sbindir}/ftpd-BSD
 %dir %{_sysconfdir}/ftpd
-%attr(640,root,root) %config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/pam.d/ftp
+%attr(640,root,root) %config(noreplace) %verify(not md5 mtime size) /etc/pam.d/ftp
 %attr(640,root,root) %config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/ftpd/ftpusers
-%attr(640,root,root) %config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/sysconfig/rc-inetd/ftpd
-%dir /home/ftp
-%dir /home/ftp/pub
-%attr(700,root,ftp) %verify(not mode) %dir /home/ftp/upload
+%attr(640,root,root) %config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/rc-inetd/ftpd
+%dir /home/services/ftp
+%dir /home/services/ftp/pub
+%attr(700,root,ftp) %verify(not mode) %dir /home/services/ftp/upload
 %{_mandir}/man8/*
 %lang(ja) %{_mandir}/ja/man5/ftpusers*
 %lang(pl) %{_mandir}/pl/man5/ftpusers*